# packages

pkgId: 3c9f7dad83b06b48204bbe6a477209d09752d217600fa53bfb9e15b36f3727c7
name: perl-Sub-Name
arch: x86_64
version: 0.21
epoch: 0
release: 7.el8
summary: Name - or rename - a sub
url: https://metacpan.org/release/Sub-Name
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Sub-Name-0.21-7.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Sub-Name/0.21/7.el8/x86_64/perl-Sub-Name-0.21-7.el8.x86_64.rpm
checksum_type: sha256
description:
  This module allows one to "name" or rename subroutines, including anonymous
  ones.

  Note that this is mainly for aid in debugging; you still cannot call the sub
  by the new name (without some deep magic).


pkgId: d34c170ab5002692c39b01eaf7068f616eaffd59e89ffaf2b777fcd3b07b4bfe
name: perl-Sub-Uplevel
arch: noarch
version: 0.2800
epoch: 1
release: 4.el8
summary: Apparently run a function in a higher stack frame
url: http://search.cpan.org/dist/Sub-Uplevel/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Sub-Uplevel-0.2800-4.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Sub-Uplevel/0.2800/4.el8/noarch/perl-Sub-Uplevel-0.2800-4.el8.noarch.rpm
checksum_type: sha256
description:
  Like Tcl's uplevel() function, but not quite so dangerous. The idea is
  just to fool caller(). All the really naughty bits of Tcl's uplevel()
  are avoided.


pkgId: 53c515c80447953a6275d25b45210b01966b4e066aa32d6bf42d355e3556571d
name: perl-Switch
arch: noarch
version: 2.17
epoch: 0
release: 10.el8
summary: A switch statement for Perl
url: http://search.cpan.org/dist/Switch/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Switch-2.17-10.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Switch/2.17/10.el8/noarch/perl-Switch-2.17-10.el8.noarch.rpm
checksum_type: sha256
description:
  Switch.pm provides the syntax and semantics for an explicit case mechanism for
  Perl. The syntax is minimal, introducing only the keywords C<switch> and
  C<case> and conforming to the general pattern of existing Perl control
  structures. The semantics are particularly rich, allowing any one (or more) of
  nearly 30 forms of matching to be used when comparing a switch value with its
  various cases.


pkgId: 52740e190e36f6258966932338ff9e7e941c6c80c3d3eb9ef75efbb1b4a60bff
name: perl-Sys-Guestfs
arch: x86_64
version: 1.44.0
epoch: 1
release: 9.0.1.module+an8.8.0+11068+fffcc9a2
summary: Perl bindings for libguestfs (Sys::Guestfs)
description: perl-Sys-Guestfs contains Perl bindings for libguestfs (Sys::Guestfs).
url: http://libguestfs.org/
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: libguestfs-1.44.0-9.0.1.module+an8.8.0+11068+fffcc9a2.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/libguestfs/1.44.0/9.0.1.module+an8.8.0+11068+fffcc9a2/x86_64/perl-Sys-Guestfs-1.44.0-9.0.1.module+an8.8.0+11068+fffcc9a2.x86_64.rpm


pkgId: 2b7adcf52d8b150382260eeaf4e75d5329465383ca84d90d07e8c6a2deb12a2b
name: perl-Sys-MemInfo
arch: x86_64
version: 0.99
epoch: 0
release: 6.0.1.an8
summary: Memory information as Perl module
url: http://search.cpan.org/dist/Sys-MemInfo/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Sys-MemInfo-0.99-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Sys-MemInfo/0.99/6.0.1.an8/x86_64/perl-Sys-MemInfo-0.99-6.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Sys::MemInfo returns the total amount of free and used physical memory in
  bytes in totalmem and freemem variables.


pkgId: 22bf88f3e4baecb52d001c8e936e3c778ae65d38b8013db49e85a1db6c4b9ab3
name: perl-Sys-MemInfo-doc
arch: noarch
version: 0.99
epoch: 0
release: 6.0.1.an8
summary: Documents for perl-Sys-MemInfo
description: Doc pages for perl-Sys-MemInfo.
url: http://search.cpan.org/dist/Sys-MemInfo/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Sys-MemInfo-0.99-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Sys-MemInfo/0.99/6.0.1.an8/noarch/perl-Sys-MemInfo-doc-0.99-6.0.1.an8.noarch.rpm


pkgId: 29759df8edfe7826cb43d72f37a12702d3e70c01520ea67418fa01c36fd7dfbe
name: perl-Sys-Syslog
arch: x86_64
version: 0.35
epoch: 0
release: 397.0.1.an8
summary: Perl interface to the UNIX syslog(3) calls
url: http://search.cpan.org/dist/Sys-Syslog/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Sys-Syslog-0.35-397.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Sys::Syslog is an interface to the UNIX syslog(3) function. Call syslog() with
  a string priority and a list of printf() arguments just like at syslog(3).

location_href:
  toplink/packages/perl-Sys-Syslog/0.35/397.0.1.an8/x86_64/perl-Sys-Syslog-0.35-397.0.1.an8.x86_64.rpm


pkgId: 4e4ab8895a1ee9b87d4fe1323a99091a02922dfae6937d9d1ff364345fb6afa8
name: perl-Sys-Syslog-doc
arch: noarch
version: 0.35
epoch: 0
release: 397.0.1.an8
summary: Documents for perl-Sys-Syslog
description: Doc pages for perl-Sys-Syslog.
url: http://search.cpan.org/dist/Sys-Syslog/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Sys-Syslog-0.35-397.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Sys-Syslog/0.35/397.0.1.an8/noarch/perl-Sys-Syslog-doc-0.35-397.0.1.an8.noarch.rpm


pkgId: e2622d9306c2d0b1d354303a24b225765cff050fe7aa922b52f19172d2ced86b
name: perl-Sys-Virt
arch: x86_64
version: 8.0.0
epoch: 0
release: 1.module+an8.8.0+11068+fffcc9a2
summary: Represent and manage a libvirt hypervisor connection
url: https://metacpan.org/release/Sys-Virt
rpm_license: GPLv2+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-Sys-Virt-8.0.0-1.module+an8.8.0+11068+fffcc9a2.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Sys::Virt module provides a Perl XS binding to the libvirt virtual
  machine management APIs. This allows machines running within arbitrary
  virtualization containers to be managed with a consistent API.

location_href:
  toplink/packages/perl-Sys-Virt/8.0.0/1.module+an8.8.0+11068+fffcc9a2/x86_64/perl-Sys-Virt-8.0.0-1.module+an8.8.0+11068+fffcc9a2.x86_64.rpm


pkgId: 33a9617d39091c319a76d4cf97a322c624b2d1bd73f6bdcb3fd8fca72d07f274
name: perl-Taint-Runtime
arch: x86_64
version: 0.03
epoch: 0
release: 32.el8
summary: Runtime enable taint checking
url: http://search.cpan.org/dist/Taint-Runtime
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Taint-Runtime-0.03-32.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Taint-Runtime/0.03/32.el8/x86_64/perl-Taint-Runtime-0.03-32.el8.x86_64.rpm
checksum_type: sha256
description:
  This module enables run-time taint checking, for cases where the -T
  switch on the command line is not appropriate or viable. There are
  a somewhat limited number of legitimate use cases where you should
  use this module instead of the -T switch. Unless you have a specific and
  good reason for not using the -T option, you should use the -T option.


pkgId: 03cfc68391504a76ebf0b65404b5cc0ab167c6d13884c76670a542c357e0aaa3
name: perl-Term-ANSIColor
arch: noarch
version: 4.06
epoch: 0
release: 396.0.1.an8
summary: Color screen output using ANSI escape sequences
url: http://search.cpan.org/dist/Term-ANSIColor/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Term-ANSIColor-4.06-396.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module has two interfaces, one through color() and colored() and the
  other through constants. It also offers the utility functions uncolor(),
  colorstrip(), colorvalid(), and coloralias(), which have to be explicitly
  imported to be used.

location_href:
  toplink/packages/perl-Term-ANSIColor/4.06/396.0.1.an8/noarch/perl-Term-ANSIColor-4.06-396.0.1.an8.noarch.rpm


pkgId: babdd995eb4565f2173f2ec194bdb1603cdbccd46a02406e3666ccaddf1122e9
name: perl-Term-ANSIColor-doc
arch: noarch
version: 4.06
epoch: 0
release: 396.0.1.an8
summary: Documents for perl-Term-ANSIColor
description: Doc pages for perl-Term-ANSIColor.
url: http://search.cpan.org/dist/Term-ANSIColor/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Term-ANSIColor-4.06-396.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Term-ANSIColor/4.06/396.0.1.an8/noarch/perl-Term-ANSIColor-doc-4.06-396.0.1.an8.noarch.rpm


pkgId: f6ae4c4b8cb2f770e608e22de2131382b9c461000b58545eb8bdd964252b4844
name: perl-Term-Cap
arch: noarch
version: 1.17
epoch: 0
release: 395.0.1.an8
summary: Perl termcap interface
url: http://search.cpan.org/dist/Term-Cap/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Term-Cap-1.17-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Term-Cap/1.17/395.0.1.an8/noarch/perl-Term-Cap-1.17-395.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  These are low-level functions to extract and use capabilities from a terminal
  capability (termcap) database.


pkgId: 87b1c3c1a0a1b5db28afb95bb2092777a909848fb3a634f99c81dab8af8be75f
name: perl-Term-Cap-doc
arch: noarch
version: 1.17
epoch: 0
release: 395.0.1.an8
summary: Documents for perl-Term-Cap
description: Doc pages for perl-Term-Cap.
url: http://search.cpan.org/dist/Term-Cap/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Term-Cap-1.17-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Term-Cap/1.17/395.0.1.an8/noarch/perl-Term-Cap-doc-1.17-395.0.1.an8.noarch.rpm


pkgId: ca368d315852ea127384008b7dcedab8a7faed5e3f043958695d0adadda6ec88
name: perl-Term-Size-Any
arch: noarch
version: 0.002
epoch: 0
release: 23.el8
summary: Retrieve terminal size
url: http://search.cpan.org/dist/Term-Size-Any/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Term-Size-Any-0.002-23.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Term-Size-Any/0.002/23.el8/noarch/perl-Term-Size-Any-0.002-23.el8.noarch.rpm
checksum_type: sha256
description:
  This is a unified interface to retrieve terminal size. It loads one module
  of a list of known alternatives, each implementing some way to get the
  desired terminal information. This loaded module will actually do the job
  on behalf of Term::Size::Any.


pkgId: 81ccde2ad432ac2b832afd143f0a9829f79480546ddf4add205249b2e76bc2d8
name: perl-Term-Size-Perl
arch: x86_64
version: 0.031
epoch: 0
release: 1.an8
summary: Perl extension for retrieving terminal size (Perl version)
url: http://search.cpan.org/dist/Term-Size-Perl/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Term-Size-Perl-0.031-1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Term-Size-Perl/0.031/1.an8/x86_64/perl-Term-Size-Perl-0.031-1.an8.x86_64.rpm
checksum_type: sha256
description:
  Yet another implementation of Term::Size. Now in pure Perl, with the
  exception of a C probe run on build time.


pkgId: 192a3c13f3bdc530e89fa23500922f5b266e825ce13b449d30e5aab34f023044
name: perl-TermReadKey
arch: x86_64
version: 2.37
epoch: 0
release: 7.0.1.an8
summary: A perl module for simple terminal control
url: http://search.cpan.org/~jstowe/TermReadKey/
rpm_license: (Copyright only) and (Artistic or GPL+)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-TermReadKey-2.37-7.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-TermReadKey/2.37/7.0.1.an8/x86_64/perl-TermReadKey-2.37-7.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Term::ReadKey is a compiled perl module dedicated to providing simple
  control over terminal driver modes (cbreak, raw, cooked, etc.)
  support for non-blocking reads, if the architecture allows, and some
  generalized handy functions for working with terminals.  One of the
  main goals is to have the functions as portable as possible, so you
  can just plug in "use Term::ReadKey" on any architecture and have a
  good likelyhood of it working.


pkgId: 2e3425d63c960a1e476f8a40309d9104226c7c8ce80a9c5aafc2edddc2d5c24f
name: perl-TermReadKey-doc
arch: noarch
version: 2.37
epoch: 0
release: 7.0.1.an8
summary: Documents for perl-TermReadKey
description: Doc pages for perl-TermReadKey.
url: http://search.cpan.org/~jstowe/TermReadKey/
rpm_license: (Copyright only) and (Artistic or GPL+)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-TermReadKey-2.37-7.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-TermReadKey/2.37/7.0.1.an8/noarch/perl-TermReadKey-doc-2.37-7.0.1.an8.noarch.rpm


pkgId: ab1ec619e640f571498acdcc5ad71964a9c309f627c5e6222a0bd212928b4653
name: perl-Test
arch: noarch
version: 1.30
epoch: 0
release: 422.0.1.an8
summary: Simple framework for writing test scripts
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/noarch/perl-Test-1.30-422.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  The Test Perl module simplifies the task of writing test files for Perl modules,
  such that their output is in the format that Test::Harness expects to see.


pkgId: 1956ae6f37d07248b78b6dbb09efb839f7fc647c66c1b26bb1a5a21df0431867
name: perl-Test-Deep
arch: noarch
version: 1.127
epoch: 0
release: 4.el8
summary: Extremely flexible deep comparison
url: http://search.cpan.org/dist/Test-Deep/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Deep-1.127-4.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Deep/1.127/4.el8/noarch/perl-Test-Deep-1.127-4.el8.noarch.rpm
checksum_type: sha256
description:
  Test::Deep gives you very flexible ways to check that the result you
  got is the result you were expecting. At its simplest it compares two
  structures by going through each level, ensuring that the values
  match, that arrays and hashes have the same elements and that
  references are blessed into the correct class. It also handles
  circular data structures without getting caught in an infinite loop.


pkgId: 20b796105a939405eb68a451e363fe5d8643f40101a9983e8f35de40f43a447c
name: perl-Test-Differences
arch: noarch
version: 0.6400
epoch: 0
release: 8.el8
summary: Test strings and data structures and show differences if not OK
url: http://search.cpan.org/dist/Test-Differences/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Differences-0.6400-8.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  When the code you're testing returns multiple lines, records or data
  structures and they're just plain wrong, an equivalent to the Unix
  diff utility may be just what's needed.

location_href:
  toplink/packages/perl-Test-Differences/0.6400/8.el8/noarch/perl-Test-Differences-0.6400-8.el8.noarch.rpm


pkgId: de4fe2a732ca517bf5f3f39685a99580f1347dac92da9d33a3e1163a601c9e85
name: perl-Test-Exception
arch: noarch
version: 0.43
epoch: 0
release: 7.el8
summary: Library of test functions for exception based Perl code
url: http://search.cpan.org/dist/Test-Exception/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Exception-0.43-7.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Exception/0.43/7.el8/noarch/perl-Test-Exception-0.43-7.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides a few convenience methods for testing exception
  based code. It is built with Test::Builder and plays happily with
  Test::More and friends.


pkgId: a402e6cf2c9bec47e60a1b487f7cce609db4166b06e743bcb5000dfa92851083
name: perl-Test-Fatal
arch: noarch
version: 0.014
epoch: 0
release: 9.el8
summary: Incredibly simple helpers for testing code with exceptions
url: http://search.cpan.org/dist/Test-Fatal/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Fatal-0.014-9.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Fatal/0.014/9.el8/noarch/perl-Test-Fatal-0.014-9.el8.noarch.rpm
checksum_type: sha256
description:
  Test::Fatal is an alternative to the popular Test::Exception. It does much
  less, but should allow greater flexibility in testing exception-throwing code
  with about the same amount of typing.


pkgId: 0b0ee109c0c5fc03754ea5344aa67a07177b9e91224f3b51f4ed38becc9a65a6
name: perl-Test-Harness
arch: noarch
version: 3.42
epoch: 1
release: 1.0.1.an8
summary: Run Perl standard test scripts with statistics
url: http://search.cpan.org/dist/Test-Harness/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Test-Harness-3.42-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package allows tests to be run and results automatically aggregated and
  output to STDOUT.

  Although, for historical reasons, the Test-Harness distribution takes its name
  from this module it now exists only to provide TAP::Harness with an interface
  that is somewhat backwards compatible with Test::Harness 2.xx. If you're
  writing new code consider using TAP::Harness directly instead.

location_href:
  toplink/packages/perl-Test-Harness/3.42/1.0.1.an8/noarch/perl-Test-Harness-3.42-1.0.1.an8.noarch.rpm


pkgId: d4af0d3f6f5968e6492e8686997fa8fd3a5143de96a8ba700293f2d57857ce50
name: perl-Test-Harness-doc
arch: noarch
version: 3.42
epoch: 1
release: 1.0.1.an8
summary: Documents for perl-Test-Harness
description: Doc pages for perl-Test-Harness.
url: http://search.cpan.org/dist/Test-Harness/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Test-Harness-3.42-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Test-Harness/3.42/1.0.1.an8/noarch/perl-Test-Harness-doc-3.42-1.0.1.an8.noarch.rpm


pkgId: 16004ee258b723f747a1c05133f0368fb4fed235694f094f9faaf9a49ab4901e
name: perl-Test-Inter
arch: noarch
version: 1.07
epoch: 0
release: 1.el8
summary: Framework for more readable interactive test scripts
url: http://search.cpan.org/dist/Test-Inter/
rpm_license: GPL+ or Artistic
rpm_vendor: Rocky
rpm_group: Unspecified
rpm_buildhost: ord1-prod-x86build003.svc.aws.rockylinux.org
rpm_sourcerpm: perl-Test-Inter-1.07-1.el8.src.rpm
rpm_packager: infrastructure@rockylinux.org
location_href: epel/perl-Test-Inter-1.07-1.el8.noarch.rpm
location_base: http://build.openanolis.cn/kojifiles/repos/anolis-external/8/x86_64
checksum_type: sha256
description:
  This is another framework for writing test scripts. It is loosely inspired
  by Test::More, and has most of it's functionality, but it is not a drop-in
  replacement.


pkgId: caeff4ddb34b8a7a83359570bf98ed5f97f9eefb5a851dc8571bf5313a3e8d51
name: perl-Test-LongString
arch: noarch
version: 0.17
epoch: 0
release: 10.el8
summary: Perl module to test long strings
url: http://search.cpan.org/dist/Test-LongString/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-LongString-0.17-10.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module provides some drop-in replacements for the string comparison
  functions of Test::More, but which are more suitable when you test against
  long strings. If you've ever had to search for text in a multi-line string
  like an HTML document, or find specific items in binary data, this is the
  module for you.

location_href:
  toplink/packages/perl-Test-LongString/0.17/10.el8/noarch/perl-Test-LongString-0.17-10.el8.noarch.rpm


pkgId: 6b5ebc4fb593e93b191bbfbe6a6846ef8b80dcb2af4955526b2fd92af93de076
name: perl-Test-NoWarnings
arch: noarch
version: 1.04
epoch: 0
release: 16.an8
summary: Make sure you didn't emit any warnings while testing
url: http://search.cpan.org/dist/Test-NoWarnings/
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: perl-Test-NoWarnings-1.04-16.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  In general, your tests shouldn't produce warnings. This module causes any
  warnings to be captured and stored. It automatically adds an extra test
  that will run when your script ends to check that there were no warnings.
  If there were any warnings, the test will give a "not ok" and diagnostics of
  where, when and what the warning was, including a stack trace of what was
  going on when the it occurred.

location_href:
  toplink/packages/perl-Test-NoWarnings/1.04/16.an8/noarch/perl-Test-NoWarnings-1.04-16.an8.noarch.rpm


pkgId: bf84809d1d8a1dede62060ec93cadd2189e06c6ff6c41a8d0e26e26b63d44a30
name: perl-Test-Pod-Coverage
arch: noarch
version: 1.10
epoch: 0
release: 10.el8
summary: Check for pod coverage in your distribution
url: http://search.cpan.org/dist/Test-Pod-Coverage/
rpm_license: Artistic 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Pod-Coverage-1.10-10.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Test::Pod::Coverage is used to create a test for your distribution, to
  ensure that all relevant files in your distribution are appropriately
  documented in pod.

location_href:
  toplink/packages/perl-Test-Pod-Coverage/1.10/10.el8/noarch/perl-Test-Pod-Coverage-1.10-10.el8.noarch.rpm


pkgId: 96d52f9b77b283e77c568e490b0fb82b0cbe0416e1706d10c302f618a03169dc
name: perl-Test-Requires
arch: noarch
version: 0.10
epoch: 0
release: 10.el8
summary: Checks to see if a given module can be loaded
url: http://search.cpan.org/dist/Test-Requires
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Requires-0.10-10.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Requires/0.10/10.el8/noarch/perl-Test-Requires-0.10-10.el8.noarch.rpm
checksum_type: sha256
description:
  Test::Requires checks to see if the module can be loaded.

  If this fails, rather than failing tests this skips all tests.


pkgId: ec74e1baed97f693b2836027e55aff1c5fc31d2abe1d2e2831f78eccafdcdd7e
name: perl-Test-Simple
arch: noarch
version: 1.302135
epoch: 1
release: 1.0.1.an8
summary: Basic utilities for writing tests
url: http://search.cpan.org/dist/Test-Simple
rpm_license: (GPL+ or Artistic) and CC0 and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Simple-1.302135-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package provides the bulk of the core testing facilities. For more
  information, see perldoc for Test::Simple, Test::More, etc.

  This package is the CPAN component of the dual-lifed core package Test-Simple.

location_href:
  toplink/packages/perl-Test-Simple/1.302135/1.0.1.an8/noarch/perl-Test-Simple-1.302135-1.0.1.an8.noarch.rpm


pkgId: 8d91f4305d23ade2e5a57e9efbe25b6055e8059a6935f354b95789097531f29e
name: perl-Test-Simple-doc
arch: noarch
version: 1.302135
epoch: 1
release: 1.0.1.an8
summary: Documents for perl-Test-Simple
description: Doc pages for perl-Test-Simple.
url: http://search.cpan.org/dist/Test-Simple
rpm_license: (GPL+ or Artistic) and CC0 and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Simple-1.302135-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Test-Simple/1.302135/1.0.1.an8/noarch/perl-Test-Simple-doc-1.302135-1.0.1.an8.noarch.rpm


pkgId: 2ec0681ac04b1d2346103384fc5dbd570e0a97a2f801950a082bdc831277debf
name: perl-Test-Taint
arch: x86_64
version: 1.06
epoch: 0
release: 19.el8
summary: Tools to test taintedness
url: http://search.cpan.org/dist/Test-Taint/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Taint-1.06-19.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Taint/1.06/19.el8/x86_64/perl-Test-Taint-1.06-19.el8.x86_64.rpm
checksum_type: sha256
description:
  Tainted data is data that comes from an unsafe source, such as the command
  line, or, in the case of web apps, any GET or POST transactions. Read the
  perlsec man page for details on why tainted data is bad, and how to untaint
  the data.

  When you're writing unit tests for code that deals with tainted data, you'll
  want to have a way to provide tainted data for your routines to handle, and
  easy ways to check and report on the taintedness of your data, in standard
  Test::More style.


pkgId: a445d102e0bc1d55a89bcd549568f00a2066dc0fb2059c1554d5fa7753cb3a21
name: perl-Test-Unit
arch: noarch
version: 0.25
epoch: 0
release: 28.an8
summary: The PerlUnit testing framework
url: http://perlunit.sourceforge.net/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Unit-0.25-28.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Unit/0.25/28.an8/noarch/perl-Test-Unit-0.25-28.an8.noarch.rpm
checksum_type: sha256
description:
  This framework is intended to support unit testing in an object-oriented
  development paradigm (with support for inheritance of tests etc.) and is
  derived from the JUnit testing framework for Java by Kent Beck and Erich
  Gamma.


pkgId: 5abcb67b05b712e532fedb2acad318b50b3dc2a12a7ebaac10c862704937a379
name: perl-Test-Warnings
arch: noarch
version: 0.026
epoch: 0
release: 7.el8
summary: Test for warnings and the lack of them
url: http://search.cpan.org/dist/Test-Warnings
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test-Warnings-0.026-7.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test-Warnings/0.026/7.el8/noarch/perl-Test-Warnings-0.026-7.el8.noarch.rpm
checksum_type: sha256
description:
  If you've ever tried to use Test::NoWarnings to confirm there are no warnings
  generated by your tests, combined with the convenience of done_testing to not
  have to declare a test count, you'll have discovered that these two features do
  not play well together, as the test count will be calculated before the
  warnings test is run, resulting in a TAP error (see examples/test_nowarnings.pl
  in this distribution for a demonstration).

  This module is intended to be used as a drop-in replacement for
  Test::NoWarnings: it also adds an extra test, but runs this test before
  done_testing calculates the test count, rather than after. It does this by
  hooking into done_testing as well as via an END block. You can declare a plan,
  or not, and things will still Just Work.

  It is actually equivalent to:

      use Test::NoWarnings 1.04 ':early';

  as warnings are still printed normally as they occur. You are safe, and
  enthusiastically encouraged, to perform a global search-replace of the above
  with use Test::Warnings; whether or not your tests have a plan.


pkgId: bd6db3d8e6172b19f8395a4e50be9ee31cd7597c8bfb7993f4bf9199b9d24bca
name: perl-Test-XML
arch: noarch
version: 0.08
epoch: 0
release: 10.an8
summary: Compare XML in perl tests
url: http://search.cpan.org/dist/Test-XML/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: iZbp1imezrb9a4yu5pa6ubZ
rpm_sourcerpm: perl-Test-XML-0.08-10.an8.src.rpm
rpm_packager: Koji
location_href: cyrus-imapd-deps/perl-Test-XML-0.08-10.an8.noarch.rpm
location_base: http://build.openanolis.cn/kojifiles/repos/anolis-external/8/x86_64
checksum_type: sha256
description:
  This module contains generic XML testing tools. Functions include:

  is_xml(GOT, EXPECTED [, TESTNAME ])

    This function compares GOT and EXPECTED, both of which are strings of XML.
    The comparison works semantically and will ignore differences in syntax
    that are meaningless in xml, such as different quote characters for
    attributes, order of attributes or empty tag styles. It returns true or
    false, depending upon test success.

  isnt_xml(GOT, MUST_NOT_BE [, TESTNAME ])

    This function is similiar to is_xml(), except that it will fail if GOT and
    MUST_NOT_BE are identical.

  is_well_formed_xml(XML [, TESTNAME ])

    This function determines whether or not a given XML string is parseable as
    XML.

  is_good_xml(XML [, TESTNAME ])

      This is an alias for is_well_formed_xml().


pkgId: 13746237d92d021f6896cddb27fbd305d39c014ac7ea0470e521d58eb3ddeb9f
name: perl-Test2-Suite
arch: noarch
version: 0.000111
epoch: 0
release: 1.el8
summary: Set of tools built upon the Test2 framework
url: http://search.cpan.org/dist/Test2-Suite/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Test2-Suite-0.000111-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Test2-Suite/0.000111/1.el8/noarch/perl-Test2-Suite-0.000111-1.el8.noarch.rpm
checksum_type: sha256
description:
  Rich set of tools, plugins, bundles, etc. built upon the Test2 testing
  library. If you are interested in writing Perl tests this is the distribution
  for you.


pkgId: c4a5ed38255e7f58e6b822c74f82d00afc698366d6486fc2beeaf2cc7aab76e2
name: perl-Text-Balanced
arch: noarch
version: 2.03
epoch: 0
release: 395.0.1.an8
summary: Extract delimited text sequences from strings
url: http://search.cpan.org/dist/Text-Balanced/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Text-Balanced-2.03-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  These Perl subroutines may be used to extract a delimited substring, possibly
  after skipping a specified prefix string.

location_href:
  toplink/packages/perl-Text-Balanced/2.03/395.0.1.an8/noarch/perl-Text-Balanced-2.03-395.0.1.an8.noarch.rpm


pkgId: 9801e2e0566aec378d97da580c8b4c19a23781283ddb695ed89bdeeb418dbdee
name: perl-Text-Balanced-doc
arch: noarch
version: 2.03
epoch: 0
release: 395.0.1.an8
summary: Documents for perl-Text-Balanced
description: Doc pages for perl-Text-Balanced.
url: http://search.cpan.org/dist/Text-Balanced/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Text-Balanced-2.03-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-Balanced/2.03/395.0.1.an8/noarch/perl-Text-Balanced-doc-2.03-395.0.1.an8.noarch.rpm


pkgId: e5ecf505d3a06c1a41013c6235368b3ff07ef8e7dbe2da506f356967db48d8c0
name: perl-Text-CharWidth
arch: x86_64
version: 0.04
epoch: 0
release: 32.el8
summary: Get number of occupied columns of a string on terminal
url: http://search.cpan.org/dist/Text-CharWidth/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-CharWidth-0.04-32.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Text-CharWidth/0.04/32.el8/x86_64/perl-Text-CharWidth-0.04-32.el8.x86_64.rpm
checksum_type: sha256
description:
  This is a module to provide equivalent feature as wcwidth(3) and
  wcswidth(3). This also provides mblen(3) equivalent subroutine.


pkgId: 33f7b849041b67c76d62205d2034d0a611ec0dc38db49055be0b0939220bf33a
name: perl-Text-Diff
arch: noarch
version: 1.45
epoch: 0
release: 2.0.1.an8
summary: Perform diffs on files and record sets
url: http://search.cpan.org/dist/Text-Diff/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Text-Diff-1.45-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Text-Diff/1.45/2.0.1.an8/noarch/perl-Text-Diff-1.45-2.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  Text::Diff provides a basic set of services akin to the GNU diff utility.
  It is not anywhere near as feature complete as GNU diff, but it is better
  integrated with Perl and available on all platforms. It is often faster
  than shelling out to a system's diff executable for small files, and
  generally slower on larger files.


pkgId: 3bb020f8e3525f752264f0f48b81084d584d182dd792f7da4a47f2d9a2bffe52
name: perl-Text-Glob
arch: noarch
version: 0.11
epoch: 0
release: 4.0.1.an8
summary: Perl module to match globbing patterns against text
url: http://search.cpan.org/dist/Text-Glob/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-Glob-0.11-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Text-Glob/0.11/4.0.1.an8/noarch/perl-Text-Glob-0.11-4.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  Text::Glob implements glob(3) style matching that can be used to match
  against text, rather than fetching names from a file-system.  If you
  want to do full file globbing use the File::Glob module instead.


pkgId: c51d580936b3e2d27c11f3302270afb5b52179e6c64a08510c6b9d652ccad31b
name: perl-Text-LevenshteinXS
arch: x86_64
version: 0.03
epoch: 0
release: 32.an8
summary: XS implementation of the Levenshtein edit distance
description: This module implements the Levenshtein edit distance in a XS way.
url: http://search.cpan.org/dist/Text-LevenshteinXS/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-LevenshteinXS-0.03-32.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-LevenshteinXS/0.03/32.an8/x86_64/perl-Text-LevenshteinXS-0.03-32.an8.x86_64.rpm


pkgId: 5c9b5cb4e83f518c9fbdb7ab92de263b0963ce6ca7ee3ab020d9464088eaef72
name: perl-Text-ParseWords
arch: noarch
version: 3.30
epoch: 0
release: 395.0.1.an8
summary: Parse text into an array of tokens or array of arrays
url: http://search.cpan.org/dist/Text-ParseWords/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-ParseWords-3.30-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The nested_quotewords() and quotewords() functions accept a delimiter (which
  can be a regular expression) and a list of lines and then breaks those lines
  up into a list of words ignoring delimiters that appear inside quotes.
  quotewords() returns all of the tokens in a single long list, while
  nested_quotewords() returns a list of token lists corresponding to the
  elements of @lines. parse_line() does tokenizing on a single string. The
  quotewords() functions simply call &parse_line(), so if you're only splitting
  one line you can call parse_line() directly and save a function call.

location_href:
  toplink/packages/perl-Text-ParseWords/3.30/395.0.1.an8/noarch/perl-Text-ParseWords-3.30-395.0.1.an8.noarch.rpm


pkgId: 99f02ff59b02da72b3622cc619536179b656704f94bbfa229c43ef4f7812f84a
name: perl-Text-ParseWords-doc
arch: noarch
version: 3.30
epoch: 0
release: 395.0.1.an8
summary: Documents for perl-Text-ParseWords
description: Doc pages for perl-Text-ParseWords.
url: http://search.cpan.org/dist/Text-ParseWords/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-ParseWords-3.30-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-ParseWords/3.30/395.0.1.an8/noarch/perl-Text-ParseWords-doc-3.30-395.0.1.an8.noarch.rpm


pkgId: caa989e146a36684c0df0832603f9bfdabe378dfa13460850b6f9f96aff9959c
name: perl-Text-Soundex
arch: x86_64
version: 3.05
epoch: 0
release: 8.0.1.an8
summary: Implementation of the soundex algorithm
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: (Copyright only) and (GPL+ or Artistic)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-Soundex-3.05-8.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Soundex is a phonetic algorithm for indexing names by sound, as pronounced in
  English. This module implements the original soundex algorithm developed by
  Robert Russell and Margaret Odell, as well as a variation called "American
  Soundex".

location_href:
  toplink/packages/perl-Text-Soundex/3.05/8.0.1.an8/x86_64/perl-Text-Soundex-3.05-8.0.1.an8.x86_64.rpm


pkgId: 4188761536d0293459bc5e55f72093cbb382756fa498fbf50e4c69602a796b6e
name: perl-Text-Soundex-doc
arch: noarch
version: 3.05
epoch: 0
release: 8.0.1.an8
summary: Documents for perl-Text-Soundex
description: Doc pages for perl-Text-Soundex.
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: (Copyright only) and (GPL+ or Artistic)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-Soundex-3.05-8.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-Soundex/3.05/8.0.1.an8/noarch/perl-Text-Soundex-doc-3.05-8.0.1.an8.noarch.rpm


pkgId: 33a6d751bd651c73f964f32fc9409280d6070a73eaa2dd66c9f7248bb4880c33
name: perl-Text-Tabs+Wrap
arch: noarch
version: 2013.0523
epoch: 0
release: 395.0.1.an8
summary: Expand tabs and do simple line wrapping
url: http://search.cpan.org/dist/Text-Tabs%2BWrap/
rpm_license: TTWL
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-Tabs+Wrap-2013.0523-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Text::Tabs performs the same job that the UNIX expand(1) and unexpand(1)
  commands do: adding or removing tabs from a document.

  Text::Wrap::wrap() will reformat lines into paragraphs. All it does is break
  up long lines, it will not join short lines together.

location_href:
  toplink/packages/perl-Text-Tabs+Wrap/2013.0523/395.0.1.an8/noarch/perl-Text-Tabs+Wrap-2013.0523-395.0.1.an8.noarch.rpm


pkgId: a036836f6a20dc836b4668277ed64196dec4e8ca52011f43b60a535e0e4cfa2a
name: perl-Text-Tabs+Wrap-doc
arch: noarch
version: 2013.0523
epoch: 0
release: 395.0.1.an8
summary: Documents for perl-Text-Tabs+Wrap
description: Doc pages for perl-Text-Tabs+Wrap.
url: http://search.cpan.org/dist/Text-Tabs%2BWrap/
rpm_license: TTWL
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-Tabs+Wrap-2013.0523-395.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-Tabs+Wrap/2013.0523/395.0.1.an8/noarch/perl-Text-Tabs+Wrap-doc-2013.0523-395.0.1.an8.noarch.rpm


pkgId: 67d65876eb5a6621e0e15e9491d81e4373d4e7c79478844b7a45a0ad2f7c3faa
name: perl-Text-Template
arch: noarch
version: 1.51
epoch: 0
release: 1.0.1.an8
summary: Expand template text with embedded Perl
url: http://search.cpan.org/dist/Text-Template/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Text-Template-1.51-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This is a library for generating form letters, building HTML pages, or
  filling in templates generally.  A 'template' is a piece of text that
  has little Perl programs embedded in it here and there.  When you
  'fill in' a template, you evaluate the little programs and replace
  them with their values.

location_href:
  toplink/packages/perl-Text-Template/1.51/1.0.1.an8/noarch/perl-Text-Template-1.51-1.0.1.an8.noarch.rpm


pkgId: 480d58fcd9f0249a9161931d9d63f6682e02d598eed04116c96de76a4b24b735
name: perl-Text-Template-doc
arch: noarch
version: 1.51
epoch: 0
release: 1.0.1.an8
summary: Documents for perl-Text-Template
description: Doc pages for perl-Text-Template.
url: http://search.cpan.org/dist/Text-Template/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-Text-Template-1.51-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-Template/1.51/1.0.1.an8/noarch/perl-Text-Template-doc-1.51-1.0.1.an8.noarch.rpm


pkgId: ba9338ed00b21254e15ddb2c7aabca1915db5c42c2b92f556165d139485f7c8d
name: perl-Text-Unidecode
arch: noarch
version: 1.30
epoch: 0
release: 5.0.1.an8
summary: US-ASCII transliterations of Unicode text
url: http://search.cpan.org/dist/Text-Unidecode/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-Text-Unidecode-1.30-5.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Text::Unidecode provides a function, `unidecode(...)' that takes
  Unicode data and tries to represent it in US-ASCII characters (i.e.,
  the universally displayable characters between 0x00 and 0x7F). The
  representation is almost always an attempt at *transliteration* -- i.e.,
  conveying, in Roman letters, the pronunciation expressed by the text in
  some other writing system.

location_href:
  toplink/packages/perl-Text-Unidecode/1.30/5.0.1.an8/noarch/perl-Text-Unidecode-1.30-5.0.1.an8.noarch.rpm


pkgId: 5c4ad5cf6d9b9c4d5144c50bd64a422ca5953b293c8bc8dbd4d2889cb2fee025
name: perl-Text-Unidecode-doc
arch: noarch
version: 1.30
epoch: 0
release: 5.0.1.an8
summary: Documents for perl-Text-Unidecode
description: Doc pages for perl-Text-Unidecode.
url: http://search.cpan.org/dist/Text-Unidecode/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-Text-Unidecode-1.30-5.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Text-Unidecode/1.30/5.0.1.an8/noarch/perl-Text-Unidecode-doc-1.30-5.0.1.an8.noarch.rpm


pkgId: 8efd768c0b7dbcb8a0c32ff9e08f6fd509f6345d0d7f3a4b729a273ca83ce88d
name: perl-Text-VCardFast
arch: x86_64
version: 0.11
epoch: 0
release: 6.an8
summary: Perl extension for very fast parsing of VCards
url: http://search.cpan.org/dist/Text-VCardFast/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-VCardFast-0.11-6.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Text-VCardFast/0.11/6.an8/x86_64/perl-Text-VCardFast-0.11-6.an8.x86_64.rpm
checksum_type: sha256
description:
  Text::VCardFast is designed to parse VCards very quickly compared to pure-Perl
  solutions. It has a Perl and an XS version of the same API, accessible
  as vcard2hash_pp and vcard2hash_c, with the XS version being preferred.


pkgId: 913d9251e6315fc46fb9accb10d16060b560c680df54a85f8591b05295e9fc45
name: perl-Text-WrapI18N
arch: noarch
version: 0.06
epoch: 0
release: 30.el8
summary: Line wrapping with support for several locale setups
url: http://search.cpan.org/dist/Text-WrapI18N/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Text-WrapI18N-0.06-30.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Text-WrapI18N/0.06/30.el8/noarch/perl-Text-WrapI18N-0.06-30.el8.noarch.rpm
checksum_type: sha256
description:
  This is a module which intends to substitute Text::Wrap,
  which supports internationalized texts including:
   - multi-byte encodings such as UTF-8, EUC-JP, EUC-KR, GB2312, and Big5,
   - full width characters like east Asian characters which appear in
     UTF-8, EUC-JP, EUC-KR, GB2312, Big5, and so on,
   - combining characters like diacritical marks which appear in UTF-8,
     ISO-8859-11 (aka TIS-620), and so on, and
   - languages which don't use white spaces between words, like Chinese
     and Japanese.


pkgId: b461c64380aed5ce061fc4205cfcf93572c0dab3d172e99f75c344ac64010844
name: perl-Thread-Queue
arch: noarch
version: 3.13
epoch: 0
release: 1.0.1.an8
summary: Thread-safe queues
description:
  This module provides thread-safe FIFO queues that can be accessed safely by
  any number of threads.

url: https://metacpan.org/release/Thread-Queue
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Thread-Queue-3.13-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Thread-Queue/3.13/1.0.1.an8/noarch/perl-Thread-Queue-3.13-1.0.1.an8.noarch.rpm


pkgId: f2eb80e5984f23e63cb2675d8f312eb7dec46c061d784c805ead51c9e65a8ddd
name: perl-Thread-Queue-doc
arch: noarch
version: 3.13
epoch: 0
release: 1.0.1.an8
summary: Documents for perl-Thread-Queue
description: Doc pages for perl-Thread-Queue.
url: https://metacpan.org/release/Thread-Queue
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Thread-Queue-3.13-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Thread-Queue/3.13/1.0.1.an8/noarch/perl-Thread-Queue-doc-3.13-1.0.1.an8.noarch.rpm


pkgId: 59be2c48a6832f1bcca69f71582f123f3fa7af96cbaf146b1e7b755ca645a1e1
name: perl-Tie-IxHash
arch: noarch
version: 1.23
epoch: 0
release: 13.el8
summary: Ordered associative arrays for Perl
url: http://search.cpan.org/dist/Tie-IxHash/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Tie-IxHash-1.23-13.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Tie-IxHash/1.23/13.el8/noarch/perl-Tie-IxHash-1.23-13.el8.noarch.rpm
checksum_type: sha256
description:
  This Perl module implements Perl hashes that preserve the order in
  which the hash elements were added. The order is not affected when
  values corresponding to existing keys in the IxHash are changed.
  The elements can also be set to any arbitrary supplied order. The
  familiar perl array operations can also be performed on the IxHash.


pkgId: 4fad03dc3bcf95ee59ccc974da3330bfc76d2e45ee1bfd7d3dc6804f1fc40bdd
name: perl-Time-HiRes
arch: x86_64
version: 1.9758
epoch: 4
release: 2.0.1.an8
summary: High resolution alarm, sleep, gettimeofday, interval timers
url: http://search.cpan.org/dist/Time-HiRes/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Time-HiRes-1.9758-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Time::HiRes module implements a Perl interface to the usleep, nanosleep,
  ualarm, gettimeofday, and setitimer/getitimer system calls, in other words,
  high resolution time and timers.

location_href:
  toplink/packages/perl-Time-HiRes/1.9758/2.0.1.an8/x86_64/perl-Time-HiRes-1.9758-2.0.1.an8.x86_64.rpm


pkgId: 2e2c898facf61995319d9cf9df59c8457198279be30b929fd312b51dd193c3b2
name: perl-Time-HiRes-doc
arch: noarch
version: 1.9758
epoch: 4
release: 2.0.1.an8
summary: Documents for perl-Time-HiRes
description: Doc pages for perl-Time-HiRes.
url: http://search.cpan.org/dist/Time-HiRes/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Time-HiRes-1.9758-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Time-HiRes/1.9758/2.0.1.an8/noarch/perl-Time-HiRes-doc-1.9758-2.0.1.an8.noarch.rpm


pkgId: 2faf85667d245e4915d94d88ac7a236612064ce7480c9260561705ef071f1259
name: perl-Time-Local
arch: noarch
version: 1.280
epoch: 1
release: 1.0.1.an8
summary: Efficiently compute time from local and GMT time
url: https://metacpan.org/release/Time-Local
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Time-Local-1.280-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Time-Local/1.280/1.0.1.an8/noarch/perl-Time-Local-1.280-1.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that are the inverse of built-in perl functions
  localtime() and gmtime(). They accept a date as a six-element array, and
  return the corresponding time(2) value in seconds since the system epoch
  (Midnight, January 1, 1970 GMT on Unix, for example). This value can be
  positive or negative, though POSIX only requires support for positive values,
  so dates before the system's epoch may not work on all operating systems.


pkgId: 914d923827376920ce9dff9f8b5b0ee22cbdc668c7365a047250815338f981ab
name: perl-Time-Local-doc
arch: noarch
version: 1.280
epoch: 1
release: 1.0.1.an8
summary: Documents for perl-Time-Local
description: Doc pages for perl-Time-Local.
url: https://metacpan.org/release/Time-Local
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-Time-Local-1.280-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Time-Local/1.280/1.0.1.an8/noarch/perl-Time-Local-doc-1.280-1.0.1.an8.noarch.rpm


pkgId: 0df08d63932ad2846fe4d163fd036a8cdf2337a1ccbadbe76d9fb280de1ad47c
name: perl-Time-Piece
arch: x86_64
version: 1.31
epoch: 0
release: 422.0.1.an8
summary: Time objects from localtime and gmtime
url: http://www.perl.org/
rpm_license: (GPL+ or Artistic) and BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/x86_64/perl-Time-Piece-1.31-422.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The Time::Piece module replaces the standard localtime and gmtime functions
  with implementations that return objects.  It does so in a backwards compatible
  manner, so that using localtime or gmtime as documented in perlfunc still
  behave as expected.


pkgId: fbd02c6a3001478f60382aa642d23c3f4ead2ff1953a8608c08ba4891bcd0d52
name: perl-TimeDate
arch: noarch
version: 2.30
epoch: 1
release: 13.0.1.an8
summary: A Perl module for time and date manipulation
url: http://search.cpan.org/dist/TimeDate/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-TimeDate-2.30-13.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-TimeDate/2.30/13.0.1.an8/noarch/perl-TimeDate-2.30-13.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This module includes a number of smaller modules suited for
  manipulation of time and date strings with Perl. In particular, the
  Date::Format and Date::Parse modules can display and read times and
  dates in various formats, providing a more reliable interface to
  textual representations of points in time.


pkgId: 376afcec306b2a4eaa46a8b3665cf2e895df8dc53fb02265c2af27a1a6a5f25e
name: perl-Tk
arch: x86_64
version: 804.034
epoch: 0
release: 2.0.1.an8
summary: Perl Graphical User Interface ToolKit
url: http://search.cpan.org/dist/Tk/
rpm_license: (GPL+ or Artistic) and SWL
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Tk-804.034-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Tk/804.034/2.0.1.an8/x86_64/perl-Tk-804.034-2.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This a re-port of a perl interface to Tk8.4.
  C code is derived from Tcl/Tk8.4.5.
  It also includes all the C code parts of Tix8.1.4 from SourceForge.
  The perl code corresponding to Tix's Tcl code is not fully implemented.

  Perl API is essentially the same as Tk800 series Tk800.025 but has not
  been verified as compliant. There ARE differences see pod/804delta.pod.


pkgId: 092b113ef4e4a0d0d195cf8a0438eaa1932f7e9a8e8ecd99cdf106e71460d70e
name: perl-Try-Tiny
arch: noarch
version: 0.30
epoch: 0
release: 2.el8
summary: Minimal try/catch with proper localization of $@
url: http://search.cpan.org/dist/Try-Tiny
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Try-Tiny-0.30-2.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Try-Tiny/0.30/2.el8/noarch/perl-Try-Tiny-0.30-2.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch statements that are designed to
  minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch, which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block to
  return from the parent subroutine. These extra features come at a cost of a
  few dependencies, namely Devel::Declare and Scope::Upper that are occasionally
  problematic, and the additional catch filtering uses Moose type constraints,
  which may not be desirable either.


pkgId: edf0641086371d7e2fbdfe9590ab7f78b6e2330883e77c25be958c8d08a784b0
name: perl-Types-Serialiser
arch: noarch
version: 1.0
epoch: 0
release: 12.el8
summary: Simple data types for common serialization formats
url: http://search.cpan.org/dist/Types-Serialiser/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Types-Serialiser-1.0-12.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module provides some extra data types that are used by common
  serialization formats such as JSON or CBOR. The idea is to have a repository of
  simple/small constants and containers that can be shared by different
  implementations so they become interoperable between each other.

location_href:
  toplink/packages/perl-Types-Serialiser/1.0/12.el8/noarch/perl-Types-Serialiser-1.0-12.el8.noarch.rpm


pkgId: 7ceee54e544401fea057a24b82cba99061e4b496adec52b5ac35905a6d471b82
name: perl-URI
arch: noarch
version: 1.73
epoch: 0
release: 3.el8
summary: A Perl module implementing URI parsing and manipulation
url: http://search.cpan.org/dist/URI/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-URI-1.73-3.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-URI/1.73/3.el8/noarch/perl-URI-1.73-3.el8.noarch.rpm
checksum_type: sha256
description:
  This module implements the URI class. Objects of this class represent
  "Uniform Resource Identifier references" as specified in RFC 2396 (and
  updated by RFC 2732).


pkgId: 1a1b448849ab2184124e824e6c8e527855a662eed444282c6581952a6241783d
name: perl-Unicode-Collate
arch: x86_64
version: 1.25
epoch: 0
release: 2.0.1.an8
summary: Unicode Collation Algorithm
url: http://search.cpan.org/dist/Unicode-Collate/
rpm_license: (GPL+ or Artistic) and Unicode
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unicode-Collate-1.25-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package is Perl implementation of Unicode Technical Standard #10 (Unicode
  Collation Algorithm).

location_href:
  toplink/packages/perl-Unicode-Collate/1.25/2.0.1.an8/x86_64/perl-Unicode-Collate-1.25-2.0.1.an8.x86_64.rpm


pkgId: c2efb1c2dce9ce2113bd373c57f1737cc5fdc58188f9f023f08e3dafcd45d599
name: perl-Unicode-Collate-doc
arch: noarch
version: 1.25
epoch: 0
release: 2.0.1.an8
summary: Documents for perl-Unicode-Collate
description: Doc pages for perl-Unicode-Collate.
url: http://search.cpan.org/dist/Unicode-Collate/
rpm_license: (GPL+ or Artistic) and Unicode
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unicode-Collate-1.25-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Unicode-Collate/1.25/2.0.1.an8/noarch/perl-Unicode-Collate-doc-1.25-2.0.1.an8.noarch.rpm


pkgId: 1fbbc458dd27f41c7e630cdce873c81147a5b6336909f30f93a5655543ad506d
name: perl-Unicode-EastAsianWidth
arch: noarch
version: 1.33
epoch: 0
release: 13.el8
summary: East Asian Width properties
url: http://search.cpan.org/dist/Unicode-EastAsianWidth/
rpm_license: CC0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unicode-EastAsianWidth-1.33-13.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module provide user-defined Unicode properties that deal with width
  status of East Asian characters, as specified in
  <http://www.unicode.org/unicode/reports/tr11/>.

location_href:
  toplink/packages/perl-Unicode-EastAsianWidth/1.33/13.el8/noarch/perl-Unicode-EastAsianWidth-1.33-13.el8.noarch.rpm


pkgId: 22ed0ef9bf59f05ee7e0619a497a63d684f94f6eeac9b9ae0ec446cddea19b08
name: perl-Unicode-LineBreak
arch: x86_64
version: 2017.004
epoch: 0
release: 6.el8
summary: UAX #14 Unicode Line Breaking Algorithm
url: http://search.cpan.org/dist/Unicode-LineBreak/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unicode-LineBreak-2017.004-6.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Unicode::LineBreak performs Line Breaking Algorithm described in Unicode
  Standards Annex #14 [UAX #14]. East_Asian_Width informative properties
  defined by Annex #11 [UAX #11] will be concerned to determine breaking
  positions.

location_href:
  toplink/packages/perl-Unicode-LineBreak/2017.004/6.el8/x86_64/perl-Unicode-LineBreak-2017.004-6.el8.x86_64.rpm


pkgId: 1971092c7ddea6544002b853cb6b3017e29ed07fc13f1af9445cbf932dcbaf4d
name: perl-Unicode-Normalize
arch: x86_64
version: 1.25
epoch: 0
release: 396.0.1.an8
summary: Unicode Normalization Forms
url: http://search.cpan.org/dist/Unicode-Normalize/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unicode-Normalize-1.25-396.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package provides Perl functions that can convert strings into various
  Unicode normalization forms as defined in Unicode Standard Annex #15.

location_href:
  toplink/packages/perl-Unicode-Normalize/1.25/396.0.1.an8/x86_64/perl-Unicode-Normalize-1.25-396.0.1.an8.x86_64.rpm


pkgId: e6162e6400093db902d7c1014ff6bd0f5d451aa64fc355c1ada7b291ea1baeb1
name: perl-Unicode-UTF8
arch: x86_64
version: 0.62
epoch: 0
release: 5.el8
summary: Encoding and decoding of UTF-8 encoding form
url: http://search.cpan.org/dist/Unicode-UTF8/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unicode-UTF8-0.62-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Unicode-UTF8/0.62/5.el8/x86_64/perl-Unicode-UTF8-0.62-5.el8.x86_64.rpm
checksum_type: sha256
description:
  This module provides functions to encode and decode UTF-8 encoding form as
  specified by Unicode and ISO/IEC 10646:2011.


pkgId: 417931378e74f6dda01045681e2ed1c7266e2c2bf38d0681060b1003c6d8c543
name: perl-Unix-Syslog
arch: x86_64
version: 1.1
epoch: 0
release: 29.0.1.an8
summary: Perl interface to the UNIX syslog(3) calls
url: http://search.cpan.org/dist/Unix-Syslog/
rpm_license: Artistic 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unix-Syslog-1.1-29.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Unix-Syslog/1.1/29.0.1.an8/x86_64/perl-Unix-Syslog-1.1-29.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This module provides an interface to the system logger syslogd(8) via
  Perl's XSUBs. The implementation attempts to resemble the native
  libc-functions of your system, so that anyone being familiar with
  syslog.h should be able to use this module right away.


pkgId: a781e3c01434d4daa77a0e7b37028eb3514e58e7d60c7d235077eda500b6b0d1
name: perl-Unix-Syslog-doc
arch: noarch
version: 1.1
epoch: 0
release: 29.0.1.an8
summary: Documents for perl-Unix-Syslog
description: Doc pages for perl-Unix-Syslog.
url: http://search.cpan.org/dist/Unix-Syslog/
rpm_license: Artistic 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Unix-Syslog-1.1-29.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-Unix-Syslog/1.1/29.0.1.an8/noarch/perl-Unix-Syslog-doc-1.1-29.0.1.an8.noarch.rpm


pkgId: 839343045b149001d77d1a94f3d55b88d74a7453da20418256c48675076bd1bd
name: perl-Variable-Magic
arch: x86_64
version: 0.62
epoch: 0
release: 3.el8
summary: Associate user-defined magic to variables from Perl
url: http://search.cpan.org/dist/Variable-Magic/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Variable-Magic-0.62-3.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Variable-Magic/0.62/3.el8/x86_64/perl-Variable-Magic-0.62-3.el8.x86_64.rpm
checksum_type: sha256
description:
  Magic is Perl way of enhancing objects. This mechanism let the user add
  extra data to any variable and hook syntactical operations (such as access,
  assignation or destruction) that can be applied to it. With this module,
  you can add your own magic to any variable without the pain of the C API.


pkgId: 112b56108ad41f18d7a6715f715165847c99d2b5577209473d50cb09ffaa79b5
name: perl-WWW-RobotRules
arch: noarch
version: 6.02
epoch: 0
release: 18.el8
summary: Database of robots.txt-derived permissions
url: http://search.cpan.org/dist/WWW-RobotRules/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-WWW-RobotRules-6.02-18.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-WWW-RobotRules/6.02/18.el8/noarch/perl-WWW-RobotRules-6.02-18.el8.noarch.rpm
checksum_type: sha256
description:
  This module parses /robots.txt files as specified in "A Standard for Robot
  Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters can
  use the /robots.txt file to forbid conforming robots from accessing parts
  of their web site.


pkgId: 4f09b0845376a0086f5cdb7d6c5c32b2541cfe7718c1fed5ca87a409535ab590
name: perl-XML-Catalog
arch: noarch
version: 1.03
epoch: 0
release: 11.0.1.an8
summary: Resolve public identifiers and remap system identifiers
url: http://search.cpan.org/dist/XML-Catalog/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-XML-Catalog-1.03-11.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module implements draft 0.4 of John Cowan's XML Catalog (formerly
  known as XCatalog) see
  (<https://www.oasis-open.org/committees/entity/specs/cs-entity-xml-catalogs-1.0.html>)
  Catalogs may be written in either SOCAT or XML syntax. XML::Catalog will
  assume SOCAT syntax if the catalog is not in well-formed XML syntax.

location_href:
  toplink/packages/perl-XML-Catalog/1.03/11.0.1.an8/noarch/perl-XML-Catalog-1.03-11.0.1.an8.noarch.rpm


pkgId: 9576cbff0fec7c226f5d6443a3abcd4861079907b1298e3e35ddf0ab435b4e7c
name: perl-XML-Catalog-doc
arch: noarch
version: 1.03
epoch: 0
release: 11.0.1.an8
summary: Documents for perl-XML-Catalog
description: Doc pages for perl-XML-Catalog.
url: http://search.cpan.org/dist/XML-Catalog/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-XML-Catalog-1.03-11.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-XML-Catalog/1.03/11.0.1.an8/noarch/perl-XML-Catalog-doc-1.03-11.0.1.an8.noarch.rpm


pkgId: b1f6239ac59ee398df54a79129dd96436fb0d35511084c71b576ea74b52eb3d0
name: perl-XML-DOM
arch: noarch
version: 1.46
epoch: 0
release: 5.el8
summary: DOM extension to XML::Parser
url: http://search.cpan.org/dist/XML-DOM/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-DOM-1.46-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-DOM/1.46/5.el8/noarch/perl-XML-DOM-1.46-5.el8.noarch.rpm
checksum_type: sha256
description:
  This is a Perl extension to XML::Parser. It adds a new 'Style' to
  XML::Parser, called 'DOM', that allows XML::Parser to build an Object
  Oriented data structure with a DOM Level 1 compliant interface. For a
  description of the DOM (Document Object Model), see
  <http://www.w3.org/DOM/>.


pkgId: 2c0465282ac179e6bac615102c1d140d7797681607cff53e924cad3554bf126b
name: perl-XML-Fast
arch: x86_64
version: 0.17
epoch: 0
release: 4.an8
summary: Simple and very fast XML to hash conversion
url: http://search.cpan.org/dist/XML-Fast/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-Fast-0.17-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-Fast/0.17/4.an8/x86_64/perl-XML-Fast-0.17-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This Perl module implements simple, state machine based, XML parser
  written in C. It could parse and recover some kind of broken XML's.


pkgId: c92d12d887f36ea6b87c719bf4f8fdea8177dd76b5b4a3efafe5c8de3e1ddd2b
name: perl-XML-Filter-BufferText
arch: noarch
version: 1.01
epoch: 0
release: 29.el8
summary: Filter to put all characters() in one event
url: http://search.cpan.org/dist/XML-Filter-BufferText/
rpm_license: GPL+ or Artistic
rpm_vendor: Rocky
rpm_group: Development/Libraries
rpm_buildhost: ord1-prod-a64build004.svc.aws.rockylinux.org
rpm_sourcerpm: perl-XML-Filter-BufferText-1.01-29.el8.src.rpm
rpm_packager: infrastructure@rockylinux.org
location_href: cyrus-imapd-deps/perl-XML-Filter-BufferText-1.01-29.el8.noarch.rpm
location_base: http://build.openanolis.cn/kojifiles/repos/anolis-external/8/x86_64
checksum_type: sha256
description:
  This is a very simple filter. One common cause of grief (and programmer
  error) is that XML parsers aren't required to provide character events in
  one chunk. They can, but are not forced to, and most don't. This filter
  does the trivial but oft-repeated task of putting all characters into a
  single event.


pkgId: 30918f2e136f1c13b1802521e526dbafda6754ff3aae55f692590f2db1fd9ffa
name: perl-XML-LibXML
arch: x86_64
version: 2.0132
epoch: 1
release: 2.0.1.an8
summary: Perl interface to the libxml2 library
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-XML-LibXML-2.0132-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module implements a Perl interface to the GNOME libxml2 library
  which provides interfaces for parsing and manipulating XML files. This
  module allows Perl programmers to make use of the highly capable
  validating XML parser and the high performance DOM implementation.

location_href:
  toplink/packages/perl-XML-LibXML/2.0132/2.0.1.an8/x86_64/perl-XML-LibXML-2.0132-2.0.1.an8.x86_64.rpm


pkgId: b6d881e815a54a8521a333cca4d09df8f12d8181f9456673e3a6bbd97dae330e
name: perl-XML-LibXML-doc
arch: noarch
version: 2.0132
epoch: 1
release: 2.0.1.an8
summary: Documents for perl-XML-LibXML
description: Doc pages for perl-XML-LibXML.
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-XML-LibXML-2.0132-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-XML-LibXML/2.0132/2.0.1.an8/noarch/perl-XML-LibXML-doc-2.0132-2.0.1.an8.noarch.rpm


pkgId: 4516385ae43463030a9ade292339b777331930d0dd030b0239662c4a450c8acd
name: perl-XML-NamespaceSupport
arch: noarch
version: 1.12
epoch: 0
release: 4.0.1.an8
summary: A simple generic name space support class
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module offers a simple to process name-spaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to name space URI map, and provides a number of basic checks.

location_href:
  toplink/packages/perl-XML-NamespaceSupport/1.12/4.0.1.an8/noarch/perl-XML-NamespaceSupport-1.12-4.0.1.an8.noarch.rpm


pkgId: 128d59c35f52119d44605b86b89346871f1f3f3e322cbc97fb0a0670b8a5f461
name: perl-XML-NamespaceSupport-doc
arch: noarch
version: 1.12
epoch: 0
release: 4.0.1.an8
summary: Documents for perl-XML-NamespaceSupport
description: Doc pages for perl-XML-NamespaceSupport.
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-XML-NamespaceSupport-1.12-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-XML-NamespaceSupport/1.12/4.0.1.an8/noarch/perl-XML-NamespaceSupport-doc-1.12-4.0.1.an8.noarch.rpm


pkgId: 3dc66e135fe3b6236583521d71e7ea1d1f56daf88fa53ce2c45d3f238857970c
name: perl-XML-Parser
arch: x86_64
version: 2.44
epoch: 0
release: 11.0.1.an8
summary: Perl module for parsing XML documents
url: http://search.cpan.org/dist/XML-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-Parser-2.44-11.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-Parser/2.44/11.0.1.an8/x86_64/perl-XML-Parser-2.44-11.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This module provides ways to parse XML documents. It is built on top
  of XML::Parser::Expat, which is a lower level interface to James
  Clark's expat library. Each call to one of the parsing methods creates
  a new instance of XML::Parser::Expat which is then used to parse the
  document. Expat options may be provided when the XML::Parser object is
  created. These options are then passed on to the Expat object on each
  parse call. They can also be given as extra arguments to the parse
  methods, in which case they override options given at XML::Parser
  creation time.


pkgId: 447ca1dae34ef9e8a52b51be64ddd0199d72a8344755aeb16525390a7033ccfd
name: perl-XML-Parser-doc
arch: noarch
version: 2.44
epoch: 0
release: 11.0.1.an8
summary: Documents for perl-XML-Parser
description: Doc pages for perl-XML-Parser.
url: http://search.cpan.org/dist/XML-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-Parser-2.44-11.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-XML-Parser/2.44/11.0.1.an8/noarch/perl-XML-Parser-doc-2.44-11.0.1.an8.noarch.rpm


pkgId: ce71f9bb97b4e396e3a9b57dd2ad180c91f55f60575de3d86beb9a17a9f19a1c
name: perl-XML-RegExp
arch: noarch
version: 0.04
epoch: 0
release: 14.el8
summary: Regular expressions for XML tokens
url: http://search.cpan.org/dist/XML-RegExp/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-RegExp-0.04-14.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-RegExp/0.04/14.el8/noarch/perl-XML-RegExp-0.04-14.el8.noarch.rpm
checksum_type: sha256
description:
  This package contains an utility module containing regular expressions
  for the following XML tokens: BaseChar, Ideographic, Letter, Digit,
  Extender, CombiningChar, NameChar, EntityRef, CharRef, Reference,
  Name, NmToken, and AttValue.


pkgId: e507969c94c7cf5258c605c294ce209f8b965171411016fd1f876ba387c27a39
name: perl-XML-SAX
arch: noarch
version: 1.00
epoch: 0
release: 1.0.1.an8
summary: SAX parser access API for Perl
url: http://search.cpan.org/dist/XML-SAX/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-XML-SAX-1.00-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-SAX/1.00/1.0.1.an8/noarch/perl-XML-SAX-1.00-1.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: 675113493447ecf3f5f089f5eebb2f8278f2bfc94e1b3cd9ef85c63205ac5bf7
name: perl-XML-SAX-Base
arch: noarch
version: 1.09
epoch: 0
release: 4.el8
summary: Base class SAX drivers and filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-SAX-Base-1.09-4.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-SAX-Base/1.09/4.el8/noarch/perl-XML-SAX-Base-1.09-4.el8.noarch.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for Perl SAX drivers
  and filters. Its default behavior is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.


pkgId: 3143a98038ea7528fde690eae312b85483749481cdeb57a5b4b99653270e2b95
name: perl-XML-SemanticDiff
arch: noarch
version: 1.0007
epoch: 0
release: 5.el8
summary: Perl extension for comparing XML documents
url: https://metacpan.org/release/XML-SemanticDiff
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-20.phx2.fedoraproject.org
rpm_sourcerpm: perl-XML-SemanticDiff-1.0007-5.el8.src.rpm
rpm_packager: Fedora Project
location_href: cyrus-imapd-deps/perl-XML-SemanticDiff-1.0007-5.el8.noarch.rpm
location_base: http://build.openanolis.cn/kojifiles/repos/anolis-external/8/x86_64
checksum_type: sha256
description:
  XML::SemanticDiff provides a way to compare the contents and structure of two
  XML documents. By default, it returns a list of hashrefs where each hashref
  describes a single difference between the two docs.


pkgId: 778c31c8728bcfb07d30f7dca232452434e0a6751921300b775ff9b729f7f037
name: perl-XML-Simple
arch: noarch
version: 2.25
epoch: 0
release: 1.el8
summary: Easy API to maintain XML in Perl
url: http://search.cpan.org/dist/XML-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-Simple-2.25-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-Simple/2.25/1.el8/noarch/perl-XML-Simple-2.25-1.el8.noarch.rpm
checksum_type: sha256
description:
  The XML::Simple module provides a simple API layer on top of an
  underlying XML parsing module (either XML::Parser or one of the SAX2
  parser modules).


pkgId: dbc27d5888654b860f815fdff3181b43ed4bbb31ab6b8ffaef892130ffa41350
name: perl-XML-Spice
arch: noarch
version: 0.05
epoch: 0
release: 5.an8
summary: Generating XML in Perl way
url: http://search.cpan.org/dist/XML-Spice/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: iZbp1imezrb9a4yu5pa6ubZ
rpm_sourcerpm: perl-XML-Spice-0.05-5.an8.src.rpm
rpm_packager: Koji
location_href: cyrus-imapd-deps/perl-XML-Spice-0.05-5.an8.noarch.rpm
location_base: http://build.openanolis.cn/kojifiles/repos/anolis-external/8/x86_64
checksum_type: sha256
description:
  XML::Spice is yet another XML generation Perl module. It tries to take some of
  the pain out of generating XML by making it more like Perl.


pkgId: 925bd9a1fcd267ab9991756cbd3c9b823edd1cbdf725a57192866d4daaecb24b
name: perl-XML-TokeParser
arch: noarch
version: 0.05
epoch: 0
release: 25.el8
summary: Simplified interface to XML::Parser
url: http://search.cpan.org/dist/XML-TokeParser/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-TokeParser-0.05-25.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-TokeParser/0.05/25.el8/noarch/perl-XML-TokeParser-0.05-25.el8.noarch.rpm
checksum_type: sha256
description:
  XML::TokeParser provides a procedural ("pull mode") interface to
  XML::Parser in much the same way that Gisle Aas' HTML::TokeParser provides
  a procedural interface to HTML::Parser. XML::TokeParser splits its XML
  input up into "tokens," each corresponding to an XML::Parser event.


pkgId: f61c47a1bcbba90075d2b933abd8817b291756631ef6dc3b2cd12e02a7eb2f07
name: perl-XML-Twig
arch: noarch
version: 3.52
epoch: 0
release: 7.el8
summary: Perl module for processing huge XML documents in tree mode
url: http://search.cpan.org/dist/XML-Twig/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-Twig-3.52-7.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-Twig/3.52/7.el8/noarch/perl-XML-Twig-3.52-7.el8.noarch.rpm
checksum_type: sha256
description:
  This module provides a way to process XML documents. It is build on
  top of XML::Parser.  XML::Twig offers a tree interface to the
  document, while allowing you to output the parts of it that have been
  completely processed.  It allows minimal resource (CPU and memory)
  usage by building the tree only for the parts of the documents that
  need actual processing, through the use of the twig_roots and
  twig_print_outside_roots options.


pkgId: 39e552888ab4b7711c543f0b064440ab0b86fbeaa2888204e3c19b50239ae85c
name: perl-XML-XPath
arch: noarch
version: 1.42
epoch: 0
release: 3.el8
summary: XPath parser and evaluator for Perl
url: http://search.cpan.org/dist/XML-XPath/
rpm_license: Artistic 2.0 and (GPL+ or Artistic)
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-XML-XPath-1.42-3.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-XML-XPath/1.42/3.el8/noarch/perl-XML-XPath-1.42-3.el8.noarch.rpm
checksum_type: sha256
description:
  This module aims to comply exactly to the XPath specification at
  http://www.w3.org/TR/xpath and yet allow extensions to be added in the
  form of functions. Modules such as XSLT and XPointer may need to do
  this as they support functionality beyond XPath.


pkgId: d7623bdc27a199c4f81dc5d5fc7ce3c5bb7a89582953a559401cc5ffff98b082
name: perl-YAML-LibYAML
arch: x86_64
version: 0.70
epoch: 1
release: 1.el8
summary: Perl YAML Serialization using XS and libyaml
url: https://metacpan.org/release/YAML-LibYAML
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-YAML-LibYAML-0.70-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-YAML-LibYAML/0.70/1.el8/x86_64/perl-YAML-LibYAML-0.70-1.el8.x86_64.rpm
checksum_type: sha256
description:
  Kirill Siminov's "libyaml" is arguably the best YAML implementation. The C
  library is written precisely to the YAML 1.1 specification. It was originally
  bound to Python and was later bound to Ruby.


pkgId: 7c2c0209778833fb1637c074ff74c6132055fc33cc28f05c705bb2545408b735
name: perl-YAML-Syck
arch: x86_64
version: 1.30
epoch: 0
release: 5.el8
summary: Fast, lightweight YAML loader and dumper
url: http://search.cpan.org/dist/YAML-Syck/
rpm_license: BSD and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-YAML-Syck-1.30-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-YAML-Syck/1.30/5.el8/x86_64/perl-YAML-Syck-1.30-5.el8.x86_64.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the libsyck data serialization
  library. It exports the Dump and Load functions for converting Perl data
  structures to YAML strings, and the other way around.


pkgId: 9538a0c83d611af248e8e0872bf0bf11f1722b82f2f7509ec105f2922a0b8d54
name: perl-YAML-Tiny
arch: noarch
version: 1.73
epoch: 0
release: 2.el8
summary: Read/Write YAML files with as little code as possible
url: http://search.cpan.org/dist/YAML-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-YAML-Tiny-1.73-2.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-YAML-Tiny/1.73/2.el8/noarch/perl-YAML-Tiny-1.73-2.el8.noarch.rpm
checksum_type: sha256
description:
  YAML::Tiny is a Perl class for reading and writing YAML-style files,
  written with as little code as possible, reducing load time and
  memory overhead.


pkgId: 74cb2516c0874b1d414a42c4e8f8122a790824e644d395a0563d4e40b20a73ff
name: perl-autodie
arch: noarch
version: 2.29
epoch: 0
release: 396.0.1.an8
summary: Replace functions with ones that succeed or die
url: http://search.cpan.org/dist/autodie/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-autodie-2.29-396.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-autodie/2.29/396.0.1.an8/noarch/perl-autodie-2.29-396.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  The "autodie" and "Fatal" pragma provides a convenient way to replace
  functions that normally return false on failure with equivalents that throw an
  exception on failure.

  However "Fatal" has been obsoleted by the new autodie pragma. Please use
  autodie in preference to "Fatal".


pkgId: 896fb8ec5e2a65b1389a9b80627d9f3a4c6a759bf7a676b59d8f9a824860285e
name: perl-bignum
arch: noarch
version: 0.49
epoch: 0
release: 2.0.1.an8
summary: Transparent big number support for Perl
url: http://search.cpan.org/dist/bignum/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-bignum-0.49-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-bignum/0.49/2.0.1.an8/noarch/perl-bignum-0.49-2.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This package attempts to make it easier to write scripts that use BigInts and
  BigFloats in a transparent way.


pkgId: 3953dfcc7ffdb156f839cf0df31f0a3539264c2a46b3f9523cf618b140d54509
name: perl-common-sense
arch: x86_64
version: 3.7.4
epoch: 0
release: 8.el8
summary: "Common sense" Perl defaults
url: http://search.cpan.org/dist/common-sense
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-common-sense-3.7.4-8.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-common-sense/3.7.4/8.el8/x86_64/perl-common-sense-3.7.4-8.el8.x86_64.rpm
checksum_type: sha256
description:
  This module implements some sane defaults for Perl programs, as defined
  by two typical (or not so typical - use your common sense) specimens of
  Perl coders:

  It's supposed to be mostly the same, with much lower memory usage, as:

  	use utf8;
  	use strict qw(vars subs);
  	use feature qw(say state switch);
  	use feature qw(unicode_strings unicode_eval current_sub fc evalbytes);
  	no feature qw(array_base);
  	no warnings;
  	use warnings qw(FATAL closed threads internal debugging pack
  			portable prototype inplace io pipe unpack malloc
  			deprecated glob digit printf layer
  			reserved taint closure semicolon);
  	no warnings qw(exec newline unopened);


pkgId: cc7218097bbc8dbfa5753f2562e50e702e4cfcaaa74760c26f2c33216d1b17c8
name: perl-constant
arch: noarch
version: 1.33
epoch: 0
release: 396.0.1.an8
summary: Perl pragma to declare constants
url: http://search.cpan.org/dist/constant/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-constant-1.33-396.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-constant/1.33/396.0.1.an8/noarch/perl-constant-1.33-396.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This pragma allows you to declare constants at compile-time:

  use constant PI => 4 * atan2(1, 1);

  When you declare a constant such as "PI" using the method shown above,
  each machine your script runs upon can have as many digits of accuracy
  as it can use. Also, your program will be easier to read, more likely
  to be maintained (and maintained correctly), and far less likely to
  send a space probe to the wrong planet because nobody noticed the one
  equation in which you wrote 3.14195.

  When a constant is used in an expression, Perl replaces it with its
  value at compile time, and may then optimize the expression further.
  In particular, any code in an "if (CONSTANT)" block will be optimized
  away if the constant is false.


pkgId: aaeabe3ea1c6f1faf707faf3d2dbfbd8687c1993b4d8c6d5b941086ebf32ad68
name: perl-constant-doc
arch: noarch
version: 1.33
epoch: 0
release: 396.0.1.an8
summary: Documents for perl-constant
description: Doc pages for perl-constant.
url: http://search.cpan.org/dist/constant/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-constant-1.33-396.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-constant/1.33/396.0.1.an8/noarch/perl-constant-doc-1.33-396.0.1.an8.noarch.rpm


pkgId: 062d962c895a9e6827e75ded6aedaa6842aefcf4b4b4fd8898520bcfe3e0d1c6
name: perl-devel
arch: x86_64
version: 5.26.3
epoch: 4
release: 422.0.1.an8
summary: Header #files for use in perl development
url: http://www.perl.org/
rpm_license: (GPL+ or Artistic) and UCD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/x86_64/perl-devel-5.26.3-422.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files and development modules.
  Most perl packages will need to install perl-devel to build.


pkgId: 07488a5c5ae9d839ab8482da0e6d7300d58159f525945739121fc293dec9dea9
name: perl-encoding
arch: x86_64
version: 2.22
epoch: 4
release: 3.0.1.an8
summary: Write your Perl script in non-ASCII or non-UTF-8
url: http://search.cpan.org/dist/Encode/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-Encode-2.97-3.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-Encode/2.97/3.0.1.an8/x86_64/perl-encoding-2.22-3.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  With the encoding pragma, you can write your Perl script in any encoding you
  like (so long as the Encode module supports it) and still enjoy Unicode
  support.

  However, this encoding module is deprecated under perl 5.18. It uses
  a mechanism provided by perl that is deprecated under 5.18 and higher, and may
  be removed in a future version.

  The easiest and the best alternative is to write your script in UTF-8.


pkgId: 17ecc07e28b8214c58b0049ef0d3180f8fdad938d54cc54acd839dfbadd7b79f
name: perl-experimental
arch: noarch
version: 0.019
epoch: 0
release: 2.0.1.an8
summary: Experimental features made easy
description:
  This pragma provides an easy and convenient way to enable or disable
  experimental features.

url: http://search.cpan.org/dist/experimental/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-experimental-0.019-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-experimental/0.019/2.0.1.an8/noarch/perl-experimental-0.019-2.0.1.an8.noarch.rpm


pkgId: 24810dd8876f723138a520f1c3ea9833718d557b08e1f2770ea1e3bd8e351c0d
name: perl-experimental-doc
arch: noarch
version: 0.019
epoch: 0
release: 2.0.1.an8
summary: Documents for perl-experimental
description: Doc pages for perl-experimental.
url: http://search.cpan.org/dist/experimental/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-experimental-0.019-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-experimental/0.019/2.0.1.an8/noarch/perl-experimental-doc-0.019-2.0.1.an8.noarch.rpm


pkgId: d90e4582a552083195b080123d1ab335d4de9d96d40c808fff255cb8c6d64150
name: perl-generators
arch: noarch
version: 1.10
epoch: 0
release: 9.0.1.an8
summary: RPM Perl dependencies generators
url: http://jplesnik.fedorapeople.org/generators
rpm_license: GPL+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-generators-1.10-9.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-generators/1.10/9.0.1.an8/noarch/perl-generators-1.10-9.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This package provides RPM Perl dependencies generators which are used for
  getting provides and requires from Perl binaries and modules.


pkgId: daa933b6c561871aa18486c53a3311991b250bbfbc90f294f11dad7f0ce2fec1
name: perl-generators-doc
arch: noarch
version: 1.10
epoch: 0
release: 9.0.1.an8
summary: Documents for perl-generators
description: Doc pages for perl-generators.
url: http://jplesnik.fedorapeople.org/generators
rpm_license: GPL+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-generators-1.10-9.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-generators/1.10/9.0.1.an8/noarch/perl-generators-doc-1.10-9.0.1.an8.noarch.rpm


pkgId: 4978466f97f2e810a5883acb42de4a1e67784bc3a41a0617761a73d8ce1c81b6
name: perl-hivex
arch: x86_64
version: 1.3.18
epoch: 0
release: 23.module+an8.7.0+10987+3885000d
summary: Perl bindings for hivex
description: perl-hivex contains Perl bindings for hivex.
url: http://libguestfs.org/
rpm_license: LGPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: hivex-1.3.18-23.module+an8.7.0+10987+3885000d.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/hivex/1.3.18/23.module+an8.7.0+10987+3885000d/x86_64/perl-hivex-1.3.18-23.module+an8.7.0+10987+3885000d.x86_64.rpm


pkgId: aa213cfeedf1d8deb84b572c94ae660c56b8c0e18f2633a7284789997d3d5e32
name: perl-homedir
arch: noarch
version: 2.000024
epoch: 0
release: 2.0.1.an8
summary: Per-user Perl local::lib setup
url: http://search.cpan.org/dist/local-lib
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-local-lib-2.000024-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  perl-homedir configures the system to automatically create a ~/perl5
  directory in each user's $HOME on user login.  This allows each user to
  install CPAN packages via the CPAN to their $HOME, with no additional
  configuration or privileges, and without installing them system-wide.

  If you want your users to be able to install and use their own Perl modules,
  install this package.

location_href:
  toplink/packages/perl-local-lib/2.000024/2.0.1.an8/noarch/perl-homedir-2.000024-2.0.1.an8.noarch.rpm


pkgId: c9ab03a0c912103a16cb1bb79c56fdb146993d01c38e6337ab27339221a0ef65
name: perl-inc-latest
arch: noarch
version: 0.500
epoch: 2
release: 9.0.1.an8
summary: Use modules bundled in inc/ if they are newer than installed ones
url: http://search.cpan.org/dist/inc-latest/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-inc-latest-0.500-9.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-inc-latest/0.500/9.0.1.an8/noarch/perl-inc-latest-0.500-9.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  The inc::latest module helps bootstrap configure-time dependencies for CPAN
  distributions. These dependencies get bundled into the inc directory within
  a distribution and are used by Makefile.PL or Build.PL.


pkgId: 05178739ebfee455dad974b1d6323481e134d44312d52bc7661030e9e6a20361
name: perl-inc-latest-doc
arch: noarch
version: 0.500
epoch: 2
release: 9.0.1.an8
summary: Documents for perl-inc-latest
description: Doc pages for perl-inc-latest.
url: http://search.cpan.org/dist/inc-latest/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-inc-latest-0.500-9.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-inc-latest/0.500/9.0.1.an8/noarch/perl-inc-latest-doc-0.500-9.0.1.an8.noarch.rpm


pkgId: b7564a9f09aa3179daf3a73af564645e9caa5a0fefe47cded53e74268387dd58
name: perl-interpreter
arch: x86_64
version: 5.26.3
epoch: 4
release: 422.0.1.an8
summary: Standalone executable Perl interpreter
url: http://www.perl.org/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and BSD and Public Domain and UCD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/x86_64/perl-interpreter-5.26.3-422.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This is a Perl interpreter as a standalone executable /usr/bin/perl
  required for handling Perl scripts. It does not provide all the other Perl
  modules or tools.

  Install this package if you want to program in Perl or enable your system to
  handle Perl scripts with /usr/bin/perl interpreter.

  If your script requires some Perl modules, you can install them with
  "perl(MODULE)" where "MODULE" is a name of required module. E.g. install
  "perl(Test::More)" to make Test::More Perl module available.

  If you need all the Perl modules that come with upstream Perl sources, so
  called core modules, install perl package.

  If you only need perl run-time as a shared library, i.e. Perl interpreter
  embedded into another application, the only essential package is perl-libs.

  Perl header files can be found in perl-devel package.

  Perl utils like "splain" or "perlbug" can be found in perl-utils package.


pkgId: 14bdd7f6aab58596db81153a7778d4754237308766aad40fd2e0ada4c8244b28
name: perl-libintl-perl
arch: x86_64
version: 1.29
epoch: 0
release: 2.0.1.an8
summary: Internationalization library for Perl, compatible with gettext
url: http://search.cpan.org/dist/libintl-perl/
rpm_license: GPLv3+ and LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-libintl-perl-1.29-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The package libintl-perl is an internationalization library for Perl that
  aims to be compatible with the Uniforum message translations system as
  implemented for example in GNU gettext.

location_href:
  toplink/packages/perl-libintl-perl/1.29/2.0.1.an8/x86_64/perl-libintl-perl-1.29-2.0.1.an8.x86_64.rpm


pkgId: 0af947d41f73d5471472e8162602631e0a1ecb367a1f37d97700204fbda969f1
name: perl-libintl-perl-doc
arch: noarch
version: 1.29
epoch: 0
release: 2.0.1.an8
summary: Documents for perl-libintl-perl
description: Doc pages for perl-libintl-perl.
url: http://search.cpan.org/dist/libintl-perl/
rpm_license: GPLv3+ and LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-libintl-perl-1.29-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-libintl-perl/1.29/2.0.1.an8/noarch/perl-libintl-perl-doc-1.29-2.0.1.an8.noarch.rpm


pkgId: e3ce226e129a1a4c31e3e072f77a886b0607cf39aed49e4aa76ad1e919431600
name: perl-libnet
arch: noarch
version: 3.11
epoch: 0
release: 3.0.1.an8
summary: Perl clients for various network protocols
url: http://search.cpan.org/dist/libnet/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-libnet-3.11-3.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-libnet/3.11/3.0.1.an8/noarch/perl-libnet-3.11-3.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This is a collection of Perl modules which provides a simple and
  consistent programming interface (API) to the client side of various
  protocols used in the internet community.


pkgId: 3c5b7d8e504c6041c1fe224a2dab3a7b7d044243db129d40dd492464a9fa835b
name: perl-libwww-perl
arch: noarch
version: 6.34
epoch: 0
release: 1.el8
summary: A Perl interface to the World-Wide Web
url: https://metacpan.org/release/libwww-perl
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-libwww-perl-6.34-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-libwww-perl/6.34/1.el8/noarch/perl-libwww-perl-6.34-1.el8.noarch.rpm
checksum_type: sha256
description:
  The libwww-perl collection is a set of Perl modules which provides a simple and
  consistent application programming interface to the World-Wide Web.  The main
  focus of the library is to provide classes and functions that allow you to
  write WWW clients. The library also contain modules that are of more general
  use and even classes that help you implement simple HTTP servers.


pkgId: 83893a6ea8c975f82a158333e71dcbdaf04c179b93ac63060b8c2deaa7fd2d89
name: perl-libxml-perl
arch: noarch
version: 0.08
epoch: 0
release: 33.0.1.an8
summary: A collection of Perl modules for working with XML
url: http://search.cpan.org/dist/libxml-perl/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-libxml-perl-0.08-33.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  libxml-perl is a collection of smaller Perl modules, scripts, and
  documents for working with XML in Perl.  libxml-perl software works in
  combination with XML::Parser, PerlSAX, XML::DOM, XML::Grove and
  others.

location_href:
  toplink/packages/perl-libxml-perl/0.08/33.0.1.an8/noarch/perl-libxml-perl-0.08-33.0.1.an8.noarch.rpm


pkgId: 5a25ab85edcd5137732af0fbfbed68151ab565ea57f4e24882f1184db7c15cee
name: perl-libxml-perl-doc
arch: noarch
version: 0.08
epoch: 0
release: 33.0.1.an8
summary: Documents for perl-libxml-perl
description: Doc pages for perl-libxml-perl.
url: http://search.cpan.org/dist/libxml-perl/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-libxml-perl-0.08-33.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-libxml-perl/0.08/33.0.1.an8/noarch/perl-libxml-perl-doc-0.08-33.0.1.an8.noarch.rpm


pkgId: a23d18d1bf2adadbb2fb7fa719fa176a31086f3515b9fbc8b926a120051aee3c
name: perl-local-lib
arch: noarch
version: 2.000024
epoch: 0
release: 2.0.1.an8
summary: Create and use a local lib/ for perl modules
url: http://search.cpan.org/dist/local-lib
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-local-lib-2.000024-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This module provides a quick, convenient way of bootstrapping a user-
  local Perl module library located within the user's home directory. It
  also constructs and prints out for the user the list of environment
  variables using the syntax appropriate for the user's current shell (as
  specified by the 'SHELL' environment variable), suitable for directly
  adding to one's shell configuration file.

  More generally, local::lib allows for the bootstrapping and usage of a
  directory containing Perl modules outside of Perl's '@INC'. This makes
  it easier to ship an application with an app-specific copy of a Perl module,
  or collection of modules. Useful in cases like when an upstream maintainer
  hasn't applied a patch to a module of theirs that you need for your
  application.

location_href:
  toplink/packages/perl-local-lib/2.000024/2.0.1.an8/noarch/perl-local-lib-2.000024-2.0.1.an8.noarch.rpm


pkgId: ab429255bf24df299acc61ef1aa1874150b22c758abb5cba9b254ac92f8fac88
name: perl-local-lib-doc
arch: noarch
version: 2.000024
epoch: 0
release: 2.0.1.an8
summary: Documents for perl-local-lib
description: Doc pages for perl-local-lib.
url: http://search.cpan.org/dist/local-lib
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: perl-local-lib-2.000024-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-local-lib/2.000024/2.0.1.an8/noarch/perl-local-lib-doc-2.000024-2.0.1.an8.noarch.rpm


pkgId: b00d4cee4caba1826e5e2e138437bb920cc60bd350c03e0bfb5cc95a49003db1
name: perl-namespace-autoclean
arch: noarch
version: 0.28
epoch: 0
release: 10.el8
summary: Keep imports out of your namespace
url: http://search.cpan.org/dist/namespace-autoclean
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-namespace-autoclean-0.28-10.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be
  available as a method. The 'namespace::autoclean' pragma will remove all
  imported symbols at the end of the current package's compile cycle. Functions
  called in the package itself will still be bound by their name, but they won't
  show up as methods on your class or instances. This module is very similar to
  namespace::clean, except it will clean all imported functions, no matter if you
  imported them before or after you 'use'd the pragma. It will also not touch
  anything that looks like a method.

location_href:
  toplink/packages/perl-namespace-autoclean/0.28/10.el8/noarch/perl-namespace-autoclean-0.28-10.el8.noarch.rpm


pkgId: 99db34d347630115a25fc4599c227144507722a7b3c3e55092a49b88181ac331
name: perl-namespace-clean
arch: noarch
version: 0.27
epoch: 0
release: 7.el8
summary: Keep your namespace tidy
url: http://search.cpan.org/dist/namespace-clean/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-namespace-clean-0.27-7.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-namespace-clean/0.27/7.el8/noarch/perl-namespace-clean-0.27-7.el8.noarch.rpm
checksum_type: sha256
description:
  When you define a function, or import one, into a Perl package, it will
  naturally also be available as a method. This does not per se cause
  problems, but it can complicate subclassing and, for example, plugin
  classes that are included via multiple inheritance by loading them as
  base classes.

  The 'namespace::clean' pragma will remove all previously declared or
  imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their
  name, but they won't show up as methods on your class or instances.


pkgId: 901d32d17fc419ca1eee773eaa21d9f6174f3110be0ff66ee0964423d82c870c
name: perl-open
arch: noarch
version: 1.11
epoch: 0
release: 422.0.1.an8
summary: Perl pragma to set default PerlIO layers for input and output
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/noarch/perl-open-1.11-422.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  The "open" pragma serves as one of the interfaces to declare default "layers"
  (also known as "disciplines") for all I/O.


pkgId: c27a30116b1577d3d5b7e5d684f630ea0009fe8b7718449517950e14bf14a867
name: perl-parent
arch: noarch
version: 0.237
epoch: 1
release: 1.0.1.an8
summary: Establish an ISA relationship with base classes at compile time
url: https://metacpan.org/release/parent
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-parent-0.237-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-parent/0.237/1.0.1.an8/noarch/perl-parent-0.237-1.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  Allows you to both load one or more modules, while setting up inheritance
  from those modules at the same time. Mostly similar in effect to:

  	package Baz;

  	BEGIN {
  		require Foo;
  		require Bar;

  		push @ISA, qw(Foo Bar);
  	}


pkgId: af7dee2ba5c45f7cfdcd8c37d2bb5dcdded1bbb95e4cec6ca2969881457b8cfd
name: perl-perlfaq
arch: noarch
version: 5.20180605
epoch: 0
release: 1.0.1.an8
summary: Frequently asked questions about Perl
url: https://metacpan.org/release/perlfaq
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-perlfaq-5.20180605-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The perlfaq comprises several documents that answer the most commonly asked
  questions about Perl and Perl programming.

location_href:
  toplink/packages/perl-perlfaq/5.20180605/1.0.1.an8/noarch/perl-perlfaq-5.20180605-1.0.1.an8.noarch.rpm


pkgId: 8ad90058e955d663153d2a01f98d689337330ab17e77383cc056c81c957e7291
name: perl-perlfaq-doc
arch: noarch
version: 5.20180605
epoch: 0
release: 1.0.1.an8
summary: Documents for perl-perlfaq
description: Doc pages for perl-perlfaq.
url: https://metacpan.org/release/perlfaq
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: perl-perlfaq-5.20180605-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-perlfaq/5.20180605/1.0.1.an8/noarch/perl-perlfaq-doc-5.20180605-1.0.1.an8.noarch.rpm


pkgId: 14d6b426f7bdf9725808dd7ce58857d9db02308d14239db247959aa395cb2a0f
name: perl-podlators
arch: noarch
version: 4.11
epoch: 0
release: 1.0.1.an8
summary: Format POD source into various output formats
url: http://search.cpan.org/dist/podlators/
rpm_license: (GPL+ or Artistic) and FSFAP
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-podlators-4.11-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-podlators/4.11/1.0.1.an8/noarch/perl-podlators-4.11-1.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  This package contains Pod::Man and Pod::Text modules which convert POD input
  to *roff source output, suitable for man pages, or plain text.  It also
  includes several sub-classes of Pod::Text for formatted output to terminals
  with various capabilities.


pkgId: d18a8edf46a24bc48260d3adf308bc337e7d0a8325519ab6145b95cf31510de6
name: perl-prefork
arch: noarch
version: 1.04
epoch: 0
release: 26.el8
summary: Optimized module loading for forking or non-forking processes
url: http://search.cpan.org/dist/prefork/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-prefork-1.04-26.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-prefork/1.04/26.el8/noarch/perl-prefork-1.04-26.el8.noarch.rpm
checksum_type: sha256
description:
  Optimized module loading for forking or non-forking processes

  prefork.pm is intended to serve as a central and optional marshalling
  point for state detection (are we running in compile-time or run-time
  mode) and to act as a relatively light-weight module loader.


pkgId: 20834928783c6afbba5ed2db105bee242f9cd0b982b6d0e490776a9e05fce17f
name: perl-srpm-macros
arch: noarch
version: 1
epoch: 0
release: 25.el8
summary: RPM macros for building Perl source package from source repository
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-srpm-macros-1-25.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-srpm-macros/1/25.el8/noarch/perl-srpm-macros-1-25.el8.noarch.rpm
checksum_type: sha256
description:
  These RPM macros are used for building Perl source packages from source
  repositories. They influence build-requires set into the source package.


pkgId: 15e54576f0db475a43c88c4695bdb779f3af4c352bd398d40f2ff24ecf262190
name: perl-tests
arch: x86_64
version: 5.26.3
epoch: 4
release: 422.0.1.an8
summary: The Perl test suite
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/x86_64/perl-tests-5.26.3-422.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the test suite included with Perl 5.26.3.

  Install this if you want to test your Perl installation (binary and core
  modules).


pkgId: 3f4bd0ae5bfac815d0d1865b38ea89f9dfc7e216c36b30736e35960a839756fb
name: perl-threads
arch: x86_64
version: 2.21
epoch: 1
release: 2.0.2.an8
summary: Perl interpreter-based threads
url: http://search.cpan.org/dist/threads/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-threads-2.21-2.0.2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-threads/2.21/2.0.2.an8/x86_64/perl-threads-2.21-2.0.2.an8.x86_64.rpm
checksum_type: sha256
description:
  Since Perl 5.8, thread programming has been available using a model called
  interpreter threads which provides a new Perl interpreter for each thread,
  and, by default, results in no data or state information being shared
  between threads.

  (Prior to Perl 5.8, 5005threads was available through the "Thread.pm" API.
  This threading model has been deprecated, and was removed as of Perl 5.10.0.)


pkgId: d3670e56fd0c1f24982b69344993492a2f8d72a17e4cc8c8b13937614a195a99
name: perl-threads-shared
arch: x86_64
version: 1.58
epoch: 0
release: 2.0.1.an8
summary: Perl extension for sharing data structures between threads
url: http://search.cpan.org/dist/threads-shared/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: perl-threads-shared-1.58-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  By default, variables are private to each thread, and each newly created
  thread gets a private copy of each existing variable. This module allows
  you to share variables across different threads (and pseudo-forks on
  Win32). It is used together with the threads module.

location_href:
  toplink/packages/perl-threads-shared/1.58/2.0.1.an8/x86_64/perl-threads-shared-1.58-2.0.1.an8.x86_64.rpm


pkgId: cf075ec3a5c061c8fe4230e38518c10fd28d3dbf48d1352990af1c7e8e8d2d0b
name: perl-utils
arch: noarch
version: 5.26.3
epoch: 0
release: 422.0.1.an8
summary: Utilities packaged with the Perl distribution
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: perl-5.26.3-422.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl/5.26.3/422.0.1.an8/noarch/perl-utils-5.26.3-422.0.1.an8.noarch.rpm
checksum_type: sha256
description:
  Several utilities which come with Perl distribution like h2ph, perlbug,
  perlthanks, pl2pm, and splain. Some utilities are provided by more specific
  packages like perldoc by perl-Pod-Perldoc.


pkgId: 2a03ebbf09032af3b9118821a4817fca2cb7fb4dade499b7d88218dc9db2607e
name: perl-version
arch: x86_64
version: 0.99.24
epoch: 6
release: 1.0.2.an8
summary: Perl extension for Version Objects
url: http://search.cpan.org/dist/version/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-version-0.99.24-1.0.2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perl-version/0.99.24/1.0.2.an8/x86_64/perl-version-0.99.24-1.0.2.an8.x86_64.rpm
checksum_type: sha256
description:
  Version objects were added to Perl in 5.10. This module implements version
  objects for older version of Perl and provides the version object API for
  all versions of Perl. All previous releases before 0.74 are deprecated and
  should not be used due to incompatible API changes. Version 0.77 introduces
  the new 'parse' and 'declare' methods to standardize usage. You are
  strongly urged to set 0.77 as a minimum in your code.


pkgId: 7f73523ef3ff3e7481020434045dfcc4dbce622c665c6198972e7b76f74dbe20
name: perl-version-doc
arch: noarch
version: 0.99.24
epoch: 6
release: 1.0.2.an8
summary: Documents for perl-version
description: Doc pages for perl-version.
url: http://search.cpan.org/dist/version/
rpm_license: GPL+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perl-version-0.99.24-1.0.2.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/perl-version/0.99.24/1.0.2.an8/noarch/perl-version-doc-0.99.24-1.0.2.an8.noarch.rpm


pkgId: 4c9402b8ca92a1212240b24b176f0751789ad289e02fe8e1236c0dc997ed14ca
name: perltidy
arch: noarch
version: 20180220
epoch: 0
release: 1.el8
summary: Tool for indenting and re-formatting Perl scripts
url: http://perltidy.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: perltidy-20180220-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/perltidy/20180220/1.el8/noarch/perltidy-20180220-1.el8.noarch.rpm
checksum_type: sha256
description:
  Perltidy is a Perl script that indents and re-formats Perl scripts to
  make them easier to read. If you write Perl scripts, or spend much
  time reading them, you will probably find it useful. The formatting
  can be controlled with command line parameters. The default parameter
  settings approximately follow the suggestions in the Perl Style Guide.
  Perltidy can also output HTML of both POD and source code. Besides
  re-formatting scripts, Perltidy can be a great help in tracking down
  errors with missing or extra braces, parentheses, and square brackets
  because it is very good at localizing errors.


pkgId: 38efbdb81fdd00ab1dde91c9689d3b45c4349ba77c9fb4494254f4f2a2c5b12a
name: pesign
arch: x86_64
version: 0.112
epoch: 0
release: 27.0.1.an8
summary: Signing utility for UEFI binaries
url: https://github.com/vathpela/pesign
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pesign-0.112-27.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pesign/0.112/27.0.1.an8/x86_64/pesign-0.112-27.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the pesign utility for signing UEFI binaries as
  well as other associated tools.


pkgId: 71938cba55c3c61030b951dd547b4cec514c86aa5f3d15962ad6adcdcf5aa4fe
name: pidgin
arch: x86_64
version: 2.13.0
epoch: 0
release: 5.el8
summary: A Gtk+ based multiprotocol instant messaging client
url: http://pidgin.im/
rpm_license: BSD and GPLv2+ and GPLv2 and LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Internet
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pidgin-2.13.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pidgin/2.13.0/5.el8/x86_64/pidgin-2.13.0-5.el8.x86_64.rpm
checksum_type: sha256
description:
  Pidgin allows you to talk to anyone using a variety of messaging
  protocols including AIM, MSN, Yahoo!, Jabber, Bonjour, Gadu-Gadu,
  ICQ, IRC, Novell Groupwise, QQ, Lotus Sametime, Simple and Zephyr.
  These protocols are implemented using a modular, easy to use design.
  To use a protocol, just add an account using the account editor.

  Pidgin supports many common features of other clients, as well as many
  unique features, such as perl scripting, TCL scripting and C plugins.

  Pidgin is not affiliated with or endorsed by America Online, Inc.,
  Microsoft Corporation, Yahoo! Inc., or ICQ Inc.


pkgId: 77a0fde689e9ab5e7f38b8c64248a852a22783e0d3128164a3d2615e4e00589b
name: pidgin-devel
arch: x86_64
version: 2.13.0
epoch: 0
release: 5.el8
summary: Development headers and libraries for pidgin
url: http://pidgin.im/
rpm_license: BSD and GPLv2+ and GPLv2 and LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pidgin-2.13.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pidgin/2.13.0/5.el8/x86_64/pidgin-devel-2.13.0-5.el8.x86_64.rpm
checksum_type: sha256
description:
  The pidgin-devel package contains the header files, developer
  documentation, and libraries required for development of Pidgin scripts
  and plugins.


pkgId: 0f6cc60026903ffdfc9c65af5529a4e33403de9f1d0f2e53f60882a67da031be
name: pidgin-perl
arch: x86_64
version: 2.13.0
epoch: 0
release: 5.el8
summary: Perl scripting support for Pidgin
url: http://pidgin.im/
rpm_license: BSD and GPLv2+ and GPLv2 and LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Internet
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pidgin-2.13.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pidgin/2.13.0/5.el8/x86_64/pidgin-perl-2.13.0-5.el8.x86_64.rpm
checksum_type: sha256
description:
  Perl plugin loader for Pidgin. This package will allow you to write or
  use Pidgin plugins written in the Perl programming language.


pkgId: 532a7eb9e5bd0aa3e4ff285e3643c15d3e57df72fdb98d4e27d9e6309c5c5494
name: pidgin-sipe
arch: x86_64
version: 1.23.2
epoch: 0
release: 1.el8
summary: Pidgin protocol plugin to connect to MS Office Communicator
url: http://sipe.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Communications
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pidgin-sipe-1.23.2-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pidgin-sipe/1.23.2/1.el8/x86_64/pidgin-sipe-1.23.2-1.el8.x86_64.rpm
checksum_type: sha256
description:
  A third-party plugin for the Pidgin multi-protocol instant messenger.
  It implements the extended version of SIP/SIMPLE used by various products:

      * Skype for Business
      * Microsoft Office 365
      * Microsoft Business Productivity Online Suite (BPOS)
      * Microsoft Lync Server
      * Microsoft Office Communications Server (OCS 2007/2007 R2)
      * Microsoft Live Communications Server (LCS 2003/2005)

  With this plugin you should be able to replace your Microsoft Office
  Communicator client with Pidgin.

  This package provides the icon set for Pidgin.


pkgId: 929dca545f930d78c4bc49a5ae6e9bbed793d45edf0db9b2579f09b7b9fa9560
name: pigz
arch: x86_64
version: 2.4
epoch: 0
release: 4.el8
summary: Parallel implementation of gzip
url: http://www.zlib.net/pigz/
rpm_license: zlib
rpm_vendor: OpenAnolis Community
rpm_group: Applications/File
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pigz-2.4-4.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pigz/2.4/4.el8/x86_64/pigz-2.4-4.el8.x86_64.rpm
checksum_type: sha256
description:
  pigz, which stands for parallel implementation of gzip,
  is a fully functional replacement for gzip that exploits
  multiple processors and multiple cores to the hilt when compressing data.


pkgId: d5a7bcdac610ff9f9c060bef9fb1bb3dfeab61ecddd03845e35b2945fab861f2
name: pinentry
arch: x86_64
version: 1.1.1
epoch: 0
release: 8.an8
summary: Collection of simple PIN or passphrase entry dialogs
url: https://www.gnupg.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinentry-1.1.1-8.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinentry/1.1.1/8.an8/x86_64/pinentry-1.1.1-8.an8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the curses (text) based version of the PIN entry dialog.


pkgId: 19375b8353d263c030780d6313f7697f95cf6d5175946c70e72d189e9e9fe290
name: pinentry-emacs
arch: x86_64
version: 1.1.1
epoch: 0
release: 8.an8
summary: Passphrase/PIN entry dialog based on emacs
url: https://www.gnupg.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinentry-1.1.1-8.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinentry/1.1.1/8.an8/x86_64/pinentry-emacs-1.1.1-8.an8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the emacs based version of the PIN entry dialog.


pkgId: 377627537f4b9dc7ed474c96596175f419110f8f63d2c3f27d9f214197b55e92
name: pinentry-gnome3
arch: x86_64
version: 1.1.1
epoch: 0
release: 8.an8
summary: Passphrase/PIN entry dialog for GNOME 3
url: https://www.gnupg.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinentry-1.1.1-8.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinentry/1.1.1/8.an8/x86_64/pinentry-gnome3-1.1.1-8.an8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the GNOME 3 version of the PIN entry dialog.


pkgId: eac0bbb6eb2317c4a527810e516e2f5a2d0720800a722c938e05acac71ef1f42
name: pinentry-gtk
arch: x86_64
version: 1.1.1
epoch: 0
release: 8.an8
summary: Passphrase/PIN entry dialog based on GTK+
url: https://www.gnupg.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinentry-1.1.1-8.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinentry/1.1.1/8.an8/x86_64/pinentry-gtk-1.1.1-8.an8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the GTK GUI based version of the PIN entry dialog.


pkgId: 3f6af1a9815c98e20e29fb7f664cb4c9d02417ed241449325ddeed3251d274a9
name: pinentry-qt
arch: x86_64
version: 1.1.1
epoch: 0
release: 8.an8
summary: Passphrase/PIN entry dialog based on Qt5
url: https://www.gnupg.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinentry-1.1.1-8.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinentry/1.1.1/8.an8/x86_64/pinentry-qt-1.1.1-8.an8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the Qt4 GUI based version of the PIN entry dialog.


pkgId: 52dd35ab062f22082f7c8ddfaf73a912d8f252916137cb50086508121ced901a
name: pinentry-tty
arch: x86_64
version: 1.1.1
epoch: 0
release: 8.an8
summary: Passphrase/PIN entry dialog in tty
url: https://www.gnupg.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinentry-1.1.1-8.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinentry/1.1.1/8.an8/x86_64/pinentry-tty-1.1.1-8.an8.x86_64.rpm
checksum_type: sha256
description:
  Pinentry is a collection of simple PIN or passphrase entry dialogs which
  utilize the Assuan protocol as described by the aegypten project; see
  http://www.gnupg.org/aegypten/ for details.
  This package contains the tty version of the PIN entry dialog.


pkgId: 7dd73053370f770223e9ae338aa5c287c75c63b852adad03c093d773b938407e
name: pinfo
arch: x86_64
version: 0.6.10
epoch: 0
release: 18.el8
summary: An info file viewer
url: http://pinfo.alioth.debian.org
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pinfo-0.6.10-18.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pinfo/0.6.10/18.el8/x86_64/pinfo-0.6.10-18.el8.x86_64.rpm
checksum_type: sha256
description:
  Pinfo is an info file (or man page) viewer with a user interface
  similar to the Lynx Web browser's interface.  Pinfo supports searching
  using regular expressions, and is based on the ncurses library.


pkgId: 258167539a8dae0d38f11d9f1c54a440782f8975822cff3fb028781afff39a4e
name: pipewire-devel
arch: x86_64
version: 0.3.47
epoch: 0
release: 4.0.1.an8
summary: Headers and libraries for PipeWire client development
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pipewire-0.3.47-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pipewire/0.3.47/4.0.1.an8/x86_64/pipewire-devel-0.3.47-4.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Headers and libraries for developing applications that can communicate with
  a PipeWire media server.


pkgId: e01b88ee1e06793bc0f74ffed1d845b947a4fe9bed6661ffe939ff6fbcb3ac81
name: pipewire-libs
arch: x86_64
version: 0.3.47
epoch: 0
release: 4.0.1.an8
summary: Libraries for PipeWire clients
url: https://pipewire.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pipewire-0.3.47-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pipewire/0.3.47/4.0.1.an8/x86_64/pipewire-libs-0.3.47-4.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the runtime libraries for any application that wishes
  to interface with a PipeWire media server.


pkgId: e2d6147acbc982bc42ea9ec2c58857b97b9c4ad32c04ed40431aee4c95363eec
name: pkgconf
arch: x86_64
version: 1.4.2
epoch: 0
release: 1.el8
summary: Package compiler and linker metadata toolkit
url: http://pkgconf.org/
rpm_license: ISC
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pkgconf-1.4.2-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pkgconf/1.4.2/1.el8/x86_64/pkgconf-1.4.2-1.el8.x86_64.rpm
checksum_type: sha256
description:
  pkgconf is a program which helps to configure compiler and linker flags
  for development frameworks. It is similar to pkg-config from freedesktop.org
  and handles .pc files in a similar manner as pkg-config.


pkgId: c3cbf36c71faec70b82b55f93e3ac21afa176cd6a8d115ad268ab913a8d5e244
name: pkgconf-m4
arch: noarch
version: 1.4.2
epoch: 0
release: 1.el8
summary: m4 macros for pkgconf
url: http://pkgconf.org/
rpm_license: GPLv2+ with exceptions
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pkgconf-1.4.2-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pkgconf/1.4.2/1.el8/noarch/pkgconf-m4-1.4.2-1.el8.noarch.rpm
checksum_type: sha256
description:
  This package includes m4 macros used to support PKG_CHECK_MODULES
  when using pkgconf with autotools.


pkgId: eb7b74089c2b58dcbb297bf3f936e173f5abbf84d3b463897e8daf484ca7b2ec
name: pkgconf-pkg-config
arch: x86_64
version: 1.4.2
epoch: 0
release: 1.el8
summary: pkgconf shim to provide /usr/bin/pkg-config
url: http://pkgconf.org/
rpm_license: ISC
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pkgconf-1.4.2-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pkgconf/1.4.2/1.el8/x86_64/pkgconf-pkg-config-1.4.2-1.el8.x86_64.rpm
checksum_type: sha256
description:
  This package provides the shim links for pkgconf to be automatically
  used in place of pkgconfig. This ensures that pkgconf is used as
  the system provider of pkg-config.


pkgId: 3cfba8d7e116b7c09032e6b7ee717a068c2329d38f3dfa7b9fb7afa3955c8721
name: platform-python
arch: x86_64
version: 3.6.8
epoch: 0
release: 51.0.1.an8.1
summary: Internal interpreter of the Python programming language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python3-3.6.8-51.0.1.an8.1.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python3/3.6.8/51.0.1.an8.1/x86_64/platform-python-3.6.8-51.0.1.an8.1.x86_64.rpm
checksum_type: sha256
description:
  This is the internal interpreter of the Python language for the system.
  To use Python yourself, please install one of the available Python 3 packages,
  for example python36.


pkgId: 2676b658f7f71cee4407e81661dc780c38414ebef7baa7943218b9b970936f27
name: platform-python-coverage
arch: x86_64
version: 4.5.1
epoch: 0
release: 9.an8
summary: Code coverage testing module for Python 3
url: http://nedbatchelder.com/code/modules/coverage.html
rpm_license: ASL 2.0 and MIT and (MIT or GPL)
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-coverage-4.5.1-9.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-coverage/4.5.1/9.an8/x86_64/platform-python-coverage-4.5.1-9.an8.x86_64.rpm
checksum_type: sha256
description:
  Coverage.py is a Python 3 module that measures code coverage during Python
  execution. It uses the code analysis tools and tracing hooks provided in the
  Python standard library to determine which lines are executable, and which
  have been executed.


pkgId: 8315f5fb9ebf9d233f8080cabacd0d77e5fdceb1e74e4eb0c7512ba579721b31
name: platform-python-debug
arch: x86_64
version: 3.6.8
epoch: 0
release: 51.0.1.an8.1
summary: Debug version of the Python runtime
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python3-3.6.8-51.0.1.an8.1.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  python3-debug provides a version of the Python runtime with numerous debugging
  features enabled, aimed at advanced Python users such as developers of Python
  extension modules.

  This version uses more memory and will be slower than the regular Python build,
  but is useful for tracking down reference-counting issues and other bugs.

  The bytecode format is unchanged, so that .pyc files are compatible between
  this and the standard version of Python, but the debugging features mean that
  C/C++ extension modules are ABI-incompatible and must be built for each version
  separately.

  The debug build shares installation directories with the standard Python
  runtime, so that .py and .pyc files can be shared.
  Compiled extension modules use a special ABI flag ("d") in the filename,
  so extensions for both versions can co-exist in the same directory.

location_href:
  toplink/packages/python3/3.6.8/51.0.1.an8.1/x86_64/platform-python-debug-3.6.8-51.0.1.an8.1.x86_64.rpm


pkgId: c11730a2c248248cd35b6e5425f3f0faf7d0a0bcc3eeee804d6d75c2c5fea917
name: platform-python-devel
arch: x86_64
version: 3.6.8
epoch: 0
release: 51.0.1.an8.1
summary: Libraries and header files needed for Python development
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python3-3.6.8-51.0.1.an8.1.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the header files and configuration needed to compile
  Python extension modules (typically written in C or C++), to embed Python
  into other programs, and to make binary distributions for Python libraries.

  It also contains the necessary macros to build RPM packages with Python modules
  and 2to3 tool, an automatic source converter from Python 2.X.

location_href:
  toplink/packages/python3/3.6.8/51.0.1.an8.1/x86_64/platform-python-devel-3.6.8-51.0.1.an8.1.x86_64.rpm


pkgId: fdd0feda39f5533f5e836ea84b5e5e2f1cea381f27827ec83ece26c4d1879c1c
name: platform-python-pip
arch: noarch
version: 9.0.3
epoch: 0
release: 22.an8
summary: A tool for installing and managing Python3 packages
url: http://www.pip-installer.org
rpm_license: MIT and Python and ASL 2.0 and BSD and ISC and LGPLv2 and MPLv2.0 and (ASL 2.0 or BSD)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-pip-9.0.3-22.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-pip/9.0.3/22.an8/noarch/platform-python-pip-9.0.3-22.an8.noarch.rpm
checksum_type: sha256
description:
  pip is a package management system used to install and manage software packages
  written in Python. Many packages can be found in the Python Package Index
  (PyPI). pip is a recursive acronym that can stand for either "Pip Installs
  Packages" or "Pip Installs Python".


pkgId: 849bae782d25cc54d9efeb17dde6fa933119687d5376fc96b7ffa072f9024cd1
name: platform-python-setuptools
arch: noarch
version: 39.2.0
epoch: 0
release: 7.an8
summary: Easily build and distribute Python 3 packages
url: https://pypi.python.org/pypi/setuptools
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: python-setuptools-39.2.0-7.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Setuptools is a collection of enhancements to the Python distutils that allow
  you to more easily build and distribute Python packages, especially ones that
  have dependencies on other packages.

  This package also contains the runtime components of setuptools, necessary to
  execute the software that requires pkg_resources.py.

location_href:
  toplink/packages/python-setuptools/39.2.0/7.an8/noarch/platform-python-setuptools-39.2.0-7.an8.noarch.rpm


pkgId: bd0fcb388441ed5caeacdb827c7126dca3f36626e94b00cfdb91294176a09aa5
name: plexus-ant-factory
arch: noarch
version: 1.0
epoch: 0
release: 0.20.a2.2.module+el8.2.0+10048+55533a4a
summary: Plexus Ant component factory
description: Ant component class creator for Plexus.
url: http://plexus.codehaus.org/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Tools
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-ant-factory-1.0-0.20.a2.2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-ant-factory/1.0/0.20.a2.2.module+el8.2.0+10048+55533a4a/noarch/plexus-ant-factory-1.0-0.20.a2.2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 883d4278c6db101cf9bfacd8c6b173623bf8578b3dff97268e6900eb68c0eac7
name: plexus-ant-factory-javadoc
arch: noarch
version: 1.0
epoch: 0
release: 0.20.a2.2.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-ant-factory
description: Javadoc for plexus-ant-factory.
url: http://plexus.codehaus.org/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Documentation
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-ant-factory-1.0-0.20.a2.2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-ant-factory/1.0/0.20.a2.2.module+el8.2.0+10048+55533a4a/noarch/plexus-ant-factory-javadoc-1.0-0.20.a2.2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 6b855e8daa46cd7aed70ec4aa2785d7ef75bf1adc8690ef332d39597146a0b48
name: plexus-archiver
arch: noarch
version: 3.6.0
epoch: 0
release: 1.module+el8.2.0+10048+55533a4a
summary: Plexus Archiver Component
url: http://codehaus-plexus.github.io/plexus-archiver
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-archiver-3.6.0-1.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Plexus project seeks to create end-to-end developer tools for
  writing applications. At the core is the container, which can be
  embedded or for a full scale application server. There are many
  reusable components for hibernate, form processing, jndi, i18n,
  velocity, etc. Plexus also includes an application server which
  is like a J2EE application server, without all the baggage.

location_href:
  toplink/packages/plexus-archiver/3.6.0/1.module+el8.2.0+10048+55533a4a/noarch/plexus-archiver-3.6.0-1.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: d0201044b9021e19af96f6f063bddbe6ec51e1384855d544c45f52fac16a82e2
name: plexus-archiver-javadoc
arch: noarch
version: 3.6.0
epoch: 0
release: 1.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-archiver
description: Javadoc for plexus-archiver.
url: http://codehaus-plexus.github.io/plexus-archiver
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-archiver-3.6.0-1.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-archiver/3.6.0/1.module+el8.2.0+10048+55533a4a/noarch/plexus-archiver-javadoc-3.6.0-1.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: be6fe0a3519641d4c44f1525a92cac601d700c48ac3e74de44d65e94854a2a77
name: plexus-bsh-factory
arch: noarch
version: 1.0
epoch: 0
release: 0.19.a7.module+el8.2.0+10048+55533a4a
summary: Plexus Bsh component factory
description: Bsh component class creator for Plexus.
url: http://plexus.codehaus.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-bsh-factory-1.0-0.19.a7.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-bsh-factory/1.0/0.19.a7.module+el8.2.0+10048+55533a4a/noarch/plexus-bsh-factory-1.0-0.19.a7.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 173dcfbbf2f558ca16d8cac61001273461c498b802290370e9da4d11e5e69430
name: plexus-bsh-factory-javadoc
arch: noarch
version: 1.0
epoch: 0
release: 0.19.a7.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-bsh-factory
description: Javadoc for plexus-bsh-factory.
url: http://plexus.codehaus.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-bsh-factory-1.0-0.19.a7.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-bsh-factory/1.0/0.19.a7.module+el8.2.0+10048+55533a4a/noarch/plexus-bsh-factory-javadoc-1.0-0.19.a7.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: de887a38efd50ae1df700db76c4179f686f2a5b8ad6c84a776bc1587a618bb90
name: plexus-build-api
arch: noarch
version: 0.0.7
epoch: 0
release: 20.module+el8.2.0+10048+55533a4a
summary: Plexus Build API
description: Plexus Build API
url: https://github.com/sonatype/sisu-build-api
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-build-api-0.0.7-20.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-build-api/0.0.7/20.module+el8.2.0+10048+55533a4a/noarch/plexus-build-api-0.0.7-20.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 8a33c9c5f814b68914f72aba4356574a3ec03db4be9dc57e13efee0721cae345
name: plexus-build-api-javadoc
arch: noarch
version: 0.0.7
epoch: 0
release: 20.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-build-api
description: API documentation for plexus-build-api.
url: https://github.com/sonatype/sisu-build-api
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-build-api-0.0.7-20.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-build-api/0.0.7/20.module+el8.2.0+10048+55533a4a/noarch/plexus-build-api-javadoc-0.0.7-20.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 937b98418d2777f87aed3f839e3b46ef9633f84338b6e6068b60b7e7334a8b58
name: plexus-cipher
arch: noarch
version: 1.7
epoch: 0
release: 14.module+an8.7.0+10868+2860c6e5
summary: Plexus Cipher: encryption/decryption Component
description: Plexus Cipher: encryption/decryption Component
url: https://github.com/codehaus-plexus/plexus-cipher
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-cipher-1.7-14.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-cipher/1.7/14.module+an8.7.0+10868+2860c6e5/noarch/plexus-cipher-1.7-14.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 77f67954db676ae0cf8dab8aa478a0b073c87474a7117578afca5a47766412c4
name: plexus-cipher-javadoc
arch: noarch
version: 1.7
epoch: 0
release: 14.module+an8.7.0+10868+2860c6e5
summary: Javadoc for plexus-cipher
description: API documentation for plexus-cipher.
url: https://github.com/codehaus-plexus/plexus-cipher
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-cipher-1.7-14.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-cipher/1.7/14.module+an8.7.0+10868+2860c6e5/noarch/plexus-cipher-javadoc-1.7-14.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: b08f85704e8f7cf6645afab773118e4e015f7452c7a69dc66921ce6d7d6b42e0
name: plexus-classworlds
arch: noarch
version: 2.5.2
epoch: 0
release: 9.module+an8.7.0+10868+2860c6e5
summary: Plexus Classworlds Classloader Framework
url: https://github.com/codehaus-plexus/plexus-classworlds
rpm_license: ASL 2.0 and Plexus
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: plexus-classworlds-2.5.2-9.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Classworlds is a framework for container developers
  who require complex manipulation of Java's ClassLoaders.
  Java's native ClassLoader mechanisms and classes can cause
  much headache and confusion for certain types of
  application developers. Projects which involve dynamic
  loading of components or otherwise represent a 'container'
  can benefit from the classloading control provided by
  classworlds.

location_href:
  toplink/packages/plexus-classworlds/2.5.2/9.module+an8.7.0+10868+2860c6e5/noarch/plexus-classworlds-2.5.2-9.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: f78f69b5d19be93db92454bf83e05968fc918cdfe32a65139d1f1d2075754b56
name: plexus-classworlds-javadoc
arch: noarch
version: 2.5.2
epoch: 0
release: 9.module+an8.7.0+10868+2860c6e5
summary: Javadoc for plexus-classworlds
description: API documentation for plexus-classworlds.
url: https://github.com/codehaus-plexus/plexus-classworlds
rpm_license: ASL 2.0 and Plexus
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: plexus-classworlds-2.5.2-9.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-classworlds/2.5.2/9.module+an8.7.0+10868+2860c6e5/noarch/plexus-classworlds-javadoc-2.5.2-9.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: b05fb396a0beb7db368dc7ad7feba01248783ea7df89e2bd5c72c86ec93bfbac
name: plexus-cli
arch: noarch
version: 1.6
epoch: 0
release: 6.module+el8.2.0+10048+55533a4a
summary: Command Line Interface facilitator for Plexus
url: https://github.com/codehaus-plexus/plexus-cli
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-cli-1.6-6.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Plexus project seeks to create end-to-end developer tools for
  writing applications. At the core is the container, which can be
  embedded or for a full scale application server. There are many
  reusable components for hibernate, form processing, jndi, i18n,
  velocity, etc. Plexus also includes an application server which
  is like a J2EE application server, without all the baggage.

location_href:
  toplink/packages/plexus-cli/1.6/6.module+el8.2.0+10048+55533a4a/noarch/plexus-cli-1.6-6.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 2e9a532e1915e6a5041869a1e639901061981c745f01a2ac7efdd0b55085c923
name: plexus-cli-javadoc
arch: noarch
version: 1.6
epoch: 0
release: 6.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-cli
description: Javadoc for plexus-cli.
url: https://github.com/codehaus-plexus/plexus-cli
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-cli-1.6-6.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-cli/1.6/6.module+el8.2.0+10048+55533a4a/noarch/plexus-cli-javadoc-1.6-6.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 369e8f46a5a47361a480ebb0896693e6ab52ff9748ee08c9ab53e613f10f86ed
name: plexus-compiler
arch: noarch
version: 2.8.2
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Compiler call initiators for Plexus
url: https://github.com/codehaus-plexus/plexus-compiler
rpm_license: MIT and ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-compiler-2.8.2-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Plexus Compiler adds support for using various compilers from a
  unified api. Support for javac is available in main package. For
  additional compilers see plexus-compiler-extras package.

location_href:
  toplink/packages/plexus-compiler/2.8.2/2.module+el8.2.0+10048+55533a4a/noarch/plexus-compiler-2.8.2-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: ff564f01cc41b26d396ab21d8224e266212abe4d84aae879a5a373b8e60a3782
name: plexus-compiler-extras
arch: noarch
version: 2.8.2
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Extra compiler support for plexus-compiler
description: Additional support for csharp, eclipse and jikes compilers
url: https://github.com/codehaus-plexus/plexus-compiler
rpm_license: MIT and ASL 2.0 and ASL 1.1
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-compiler-2.8.2-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-compiler/2.8.2/2.module+el8.2.0+10048+55533a4a/noarch/plexus-compiler-extras-2.8.2-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 467c05acbd7d3d8bbd3b189ced598773020b9ec37a4c9eeea73ff067c142e32d
name: plexus-compiler-javadoc
arch: noarch
version: 2.8.2
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-compiler
description: API documentation for plexus-compiler.
url: https://github.com/codehaus-plexus/plexus-compiler
rpm_license: MIT and ASL 2.0 and ASL 1.1
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-compiler-2.8.2-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-compiler/2.8.2/2.module+el8.2.0+10048+55533a4a/noarch/plexus-compiler-javadoc-2.8.2-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 8dffa0c10ec9fbfc3ffc211dd11cb9a52b5626d1fa4af56b00bf605553c0b08b
name: plexus-compiler-pom
arch: noarch
version: 2.8.2
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Maven POM files for plexus-compiler
description: This package provides Maven POM files for plexus-compiler.
url: https://github.com/codehaus-plexus/plexus-compiler
rpm_license: MIT and ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-compiler-2.8.2-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-compiler/2.8.2/2.module+el8.2.0+10048+55533a4a/noarch/plexus-compiler-pom-2.8.2-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: abe3062b9c6620b67f12e5b282a8a916027d2a5964fbcd021a858413947fc946
name: plexus-component-api
arch: noarch
version: 1.0
epoch: 0
release: 0.24.alpha15.module+el8.2.0+10048+55533a4a
summary: Plexus Component API
description: Plexus Component API
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-component-api-1.0-0.24.alpha15.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
url:
  http://svn.codehaus.org/plexus/plexus-containers/tags/plexus-containers-1.0-alpha-15/plexus-component-api/

location_href:
  toplink/packages/plexus-component-api/1.0/0.24.alpha15.module+el8.2.0+10048+55533a4a/noarch/plexus-component-api-1.0-0.24.alpha15.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 123e777f371d7c5d8d3adbb4df2bb34c8bbf59dea3515e02c09166f4cb86e1f6
name: plexus-component-api-javadoc
arch: noarch
version: 1.0
epoch: 0
release: 0.24.alpha15.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-component-api
description: API documentation for plexus-component-api.
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-component-api-1.0-0.24.alpha15.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
url:
  http://svn.codehaus.org/plexus/plexus-containers/tags/plexus-containers-1.0-alpha-15/plexus-component-api/

location_href:
  toplink/packages/plexus-component-api/1.0/0.24.alpha15.module+el8.2.0+10048+55533a4a/noarch/plexus-component-api-javadoc-1.0-0.24.alpha15.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 09033863b8765d9a935d77f0e5175ab7e6fa8abffe8af43a9a0836f0ff4f0809
name: plexus-component-factories-pom
arch: noarch
version: 1.0
epoch: 0
release: 0.15.alpha11.module+el8.2.0+10048+55533a4a
summary: Plexus Component Factories POM
description:
  This package provides Plexus Component Factories parent POM used by different
  Plexus packages.

url: https://github.com/codehaus-plexus/plexus-component-factories
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-component-factories-pom-1.0-0.15.alpha11.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-component-factories-pom/1.0/0.15.alpha11.module+el8.2.0+10048+55533a4a/noarch/plexus-component-factories-pom-1.0-0.15.alpha11.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 0a7d4ed9e08a746b2536b271788fb507864d557ad377f50a8ad393e08b4c23cb
name: plexus-components-pom
arch: noarch
version: 1.3.1
epoch: 0
release: 10.module+el8.2.0+10048+55533a4a
summary: Plexus Components POM
description:
  This package provides Plexus Components parent POM used by different
  Plexus packages.

url: https://github.com/codehaus-plexus/plexus-components
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-components-pom-1.3.1-10.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-components-pom/1.3.1/10.module+el8.2.0+10048+55533a4a/noarch/plexus-components-pom-1.3.1-10.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 7923069156cc91f486c1dcd29600d25112b5f01814c64d481c22d3785e47546d
name: plexus-containers
arch: noarch
version: 1.7.1
epoch: 0
release: 8.module+an8.7.0+10868+2860c6e5
summary: Containers for Plexus
url: https://github.com/codehaus-plexus/plexus-containers
rpm_license: ASL 2.0 and MIT and xpp
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Plexus project seeks to create end-to-end developer tools for
  writing applications. At the core is the container, which can be
  embedded or for a full scale application server. There are many
  reusable components for hibernate, form processing, jndi, i18n,
  velocity, etc. Plexus also includes an application server which
  is like a J2EE application server, without all the baggage.

location_href:
  toplink/packages/plexus-containers/1.7.1/8.module+an8.7.0+10868+2860c6e5/noarch/plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: d9dd6da09a42954223aae4e5c8d2bc00d951d5eda4dcd3f8018326f0de0dc7fd
name: plexus-containers-component-annotations
arch: noarch
version: 1.7.1
epoch: 0
release: 8.module+an8.7.0+10868+2860c6e5
summary: Component API from plexus-containers
description: Component API from plexus-containers.
url: https://github.com/codehaus-plexus/plexus-containers
rpm_license: ASL 2.0 and MIT and xpp
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-containers/1.7.1/8.module+an8.7.0+10868+2860c6e5/noarch/plexus-containers-component-annotations-1.7.1-8.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: c27198a959b7081ef34c1f5501f418c2e249b20b6dea679bc55d9213d367c5d8
name: plexus-containers-component-javadoc
arch: noarch
version: 1.7.1
epoch: 0
release: 8.module+an8.7.0+10868+2860c6e5
summary: Javadoc component from plexus-containers
description: Javadoc component from plexus-containers.
url: https://github.com/codehaus-plexus/plexus-containers
rpm_license: ASL 2.0 and MIT and xpp
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-containers/1.7.1/8.module+an8.7.0+10868+2860c6e5/noarch/plexus-containers-component-javadoc-1.7.1-8.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 0f43da0dfec62713e4017fed808b11275c588e1d5b48f8b7ab10f6c5b9faf8cd
name: plexus-containers-component-metadata
arch: noarch
version: 1.7.1
epoch: 0
release: 8.module+an8.7.0+10868+2860c6e5
summary: Component metadata from plexus-containers
description: Component metadata from plexus-containers.
url: https://github.com/codehaus-plexus/plexus-containers
rpm_license: ASL 2.0 and MIT and xpp
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-containers/1.7.1/8.module+an8.7.0+10868+2860c6e5/noarch/plexus-containers-component-metadata-1.7.1-8.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: fd6997b13957c830d9d2d51fabc0004095a8b5b6237daf618476dd48b33f8d5e
name: plexus-containers-container-default
arch: noarch
version: 1.7.1
epoch: 0
release: 8.module+an8.7.0+10868+2860c6e5
summary: Default Container from plexus-containers
description: Default Container from plexus-containers.
url: https://github.com/codehaus-plexus/plexus-containers
rpm_license: ASL 2.0 and MIT and xpp
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-containers/1.7.1/8.module+an8.7.0+10868+2860c6e5/noarch/plexus-containers-container-default-1.7.1-8.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 019b3e5ba1da056d787c30947b864f1bbb9bb6c010c5421cdea5dc9880c0d38c
name: plexus-containers-javadoc
arch: noarch
version: 1.7.1
epoch: 0
release: 8.module+an8.7.0+10868+2860c6e5
summary: API documentation for all plexus-containers packages
description: API documentation for all plexus-containers packages.
url: https://github.com/codehaus-plexus/plexus-containers
rpm_license: ASL 2.0 and MIT and xpp
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-containers-1.7.1-8.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-containers/1.7.1/8.module+an8.7.0+10868+2860c6e5/noarch/plexus-containers-javadoc-1.7.1-8.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 9a926efd109ccb2cf11952845bc084df9b32e657a3f38974c8ab84df191b7691
name: plexus-i18n
arch: noarch
version: 1.0
epoch: 0
release: 0.11.b10.4.module+el8.2.0+10048+55533a4a
summary: Plexus I18N Component
url: https://github.com/codehaus-plexus/plexus-i18n
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Java
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-i18n-1.0-0.11.b10.4.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
[cell repeats an earlier one in this file: 382 characters]

location_href:
  toplink/packages/plexus-i18n/1.0/0.11.b10.4.module+el8.2.0+10048+55533a4a/noarch/plexus-i18n-1.0-0.11.b10.4.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 519e7339a60dbbde68497cb78f4134201b91fd090908cc94be374d4811fc87bb
name: plexus-i18n-javadoc
arch: noarch
version: 1.0
epoch: 0
release: 0.11.b10.4.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-i18n
description: Javadoc for plexus-i18n.
url: https://github.com/codehaus-plexus/plexus-i18n
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Java
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-i18n-1.0-0.11.b10.4.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-i18n/1.0/0.11.b10.4.module+el8.2.0+10048+55533a4a/noarch/plexus-i18n-javadoc-1.0-0.11.b10.4.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 2c94a3f4d964ee04afd5ef2b8b4317cd467e70d2dacbce896ab9418f60c41f17
name: plexus-interactivity
arch: noarch
version: 1.0
epoch: 0
release: 0.27.alpha6.module+el8.2.0+10048+55533a4a
summary: Plexus Interactivity Handler Component
url: https://github.com/codehaus-plexus/plexus-interactivity
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-interactivity-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
[cell repeats an earlier one in this file: 382 characters]

location_href:
  toplink/packages/plexus-interactivity/1.0/0.27.alpha6.module+el8.2.0+10048+55533a4a/noarch/plexus-interactivity-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 4b8f3e4687ad4f08831696429c0763cb2d79d2e08714d5c9411ef27ef78b1665
name: plexus-interactivity-api
arch: noarch
version: 1.0
epoch: 0
release: 0.27.alpha6.module+el8.2.0+10048+55533a4a
summary: API for plexus-interactivity
description: API module for plexus-interactivity.
url: https://github.com/codehaus-plexus/plexus-interactivity
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-interactivity-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-interactivity/1.0/0.27.alpha6.module+el8.2.0+10048+55533a4a/noarch/plexus-interactivity-api-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 716baae7bf936fc2f6369168e15e85fb0608154bf16c10ae3451fc070ddd4885
name: plexus-interactivity-javadoc
arch: noarch
version: 1.0
epoch: 0
release: 0.27.alpha6.module+el8.2.0+10048+55533a4a
summary: API documentation for plexus-interactivity
description: This package provides API documentation for plexus-interactivity.
url: https://github.com/codehaus-plexus/plexus-interactivity
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-interactivity-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-interactivity/1.0/0.27.alpha6.module+el8.2.0+10048+55533a4a/noarch/plexus-interactivity-javadoc-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 6ac6d551ff2f530cbec18483cc9e500e6bd6f18ada9ae183d55559cde11a53c6
name: plexus-interactivity-jline
arch: noarch
version: 1.0
epoch: 0
release: 0.27.alpha6.module+el8.2.0+10048+55533a4a
summary: jline module for plexus-interactivity
description: jline module for plexus-interactivity.
url: https://github.com/codehaus-plexus/plexus-interactivity
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-interactivity-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-interactivity/1.0/0.27.alpha6.module+el8.2.0+10048+55533a4a/noarch/plexus-interactivity-jline-1.0-0.27.alpha6.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 0b426cd7a3f63bf9164e6f8bb466de521ab8785cb9df0f73710e3b1b2a3ac54f
name: plexus-interpolation
arch: noarch
version: 1.22
epoch: 0
release: 9.module+an8.7.0+10868+2860c6e5
summary: Plexus Interpolation API
url: https://github.com/codehaus-plexus/plexus-interpolation
rpm_license: ASL 2.0 and ASL 1.1 and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-interpolation-1.22-9.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Plexus interpolator is the outgrowth of multiple iterations of development
  focused on providing a more modular, flexible interpolation framework for
  the expression language style commonly seen in Maven, Plexus, and other
  related projects.

location_href:
  toplink/packages/plexus-interpolation/1.22/9.module+an8.7.0+10868+2860c6e5/noarch/plexus-interpolation-1.22-9.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 79522045d280b53d1473dc75b49be07f0bf6385e6b0378af953154b5ed5f4237
name: plexus-interpolation-javadoc
arch: noarch
version: 1.22
epoch: 0
release: 9.module+an8.7.0+10868+2860c6e5
summary: Javadoc for plexus-interpolation
description: API documentation for plexus-interpolation.
url: https://github.com/codehaus-plexus/plexus-interpolation
rpm_license: ASL 2.0 and ASL 1.1 and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-interpolation-1.22-9.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-interpolation/1.22/9.module+an8.7.0+10868+2860c6e5/noarch/plexus-interpolation-javadoc-1.22-9.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: bbff34a515dc71790d67d71a39b38c6ea9306dead03c380e8bd67d06b5e1f13f
name: plexus-io
arch: noarch
version: 3.0.0
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Plexus IO Components
description:
  Plexus IO is a set of plexus components, which are designed for use
  in I/O operations.

url: https://github.com/codehaus-plexus/plexus-io
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-io-3.0.0-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-io/3.0.0/2.module+el8.2.0+10048+55533a4a/noarch/plexus-io-3.0.0-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 3c0b445c4aff46b9a36b3a35969114fef83797c476bdce54cfa1de38f17c4a00
name: plexus-io-javadoc
arch: noarch
version: 3.0.0
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-io
description: API documentation for plexus-io.
url: https://github.com/codehaus-plexus/plexus-io
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-io-3.0.0-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-io/3.0.0/2.module+el8.2.0+10048+55533a4a/noarch/plexus-io-javadoc-3.0.0-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: a63e01f75c09ed5bfaa9af002447a1b333bca9531c1363775b17df4ce928ec53
name: plexus-languages
arch: noarch
version: 0.9.10
epoch: 0
release: 3.module+el8.2.0+10048+55533a4a
summary: Plexus Languages
description:
  Plexus Languages is a set of Plexus components that maintain shared
  language features.

url: https://github.com/codehaus-plexus/plexus-languages
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-languages-0.9.10-3.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-languages/0.9.10/3.module+el8.2.0+10048+55533a4a/noarch/plexus-languages-0.9.10-3.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: e906e9e0f9245883251b2f63175fcc6672db0e13a051b53134509d23c33cb497
name: plexus-languages-javadoc
arch: noarch
version: 0.9.10
epoch: 0
release: 3.module+el8.2.0+10048+55533a4a
summary: API documentation for plexus-languages
description: API documentation for plexus-languages.
url: https://github.com/codehaus-plexus/plexus-languages
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-languages-0.9.10-3.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-languages/0.9.10/3.module+el8.2.0+10048+55533a4a/noarch/plexus-languages-javadoc-0.9.10-3.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: cd8be823ac0c3059273def19b70ab3f5b3bcd4a59038699ac48ac2e73a16f5a4
name: plexus-pom
arch: noarch
version: 5.0
epoch: 0
release: 2.module+el8.2.0+10048+55533a4a
summary: Root Plexus Projects POM
url: https://github.com/codehaus-plexus/plexus-pom
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-pom-5.0-2.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Plexus project provides a full software stack for creating and
  executing software projects.  This package provides parent POM for
  Plexus packages.

location_href:
  toplink/packages/plexus-pom/5.0/2.module+el8.2.0+10048+55533a4a/noarch/plexus-pom-5.0-2.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: ce6be2430f7f51b8236906273c154d6fb4a3bca3b4456b9d636e1bccd920aadb
name: plexus-resources
arch: noarch
version: 1.0
epoch: 0
release: 0.23.a7.module+el8.2.0+10048+55533a4a
summary: Plexus Resource Manager
url: https://github.com/codehaus-plexus/plexus-resources
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-resources-1.0-0.23.a7.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
[cell repeats an earlier one in this file: 382 characters]

location_href:
  toplink/packages/plexus-resources/1.0/0.23.a7.module+el8.2.0+10048+55533a4a/noarch/plexus-resources-1.0-0.23.a7.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: efa1c73587d2e4d329907c844e4ed7ef659a62a234c0e853686b1171389012f6
name: plexus-resources-javadoc
arch: noarch
version: 1.0
epoch: 0
release: 0.23.a7.module+el8.2.0+10048+55533a4a
summary: Javadoc for plexus-resources
description: API documentation for plexus-resources.
url: https://github.com/codehaus-plexus/plexus-resources
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-resources-1.0-0.23.a7.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-resources/1.0/0.23.a7.module+el8.2.0+10048+55533a4a/noarch/plexus-resources-javadoc-1.0-0.23.a7.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: ac852b014832037b782fa12055d86ddea81d03d3af47af16e4a15edb1dbf495b
name: plexus-sec-dispatcher
arch: noarch
version: 1.4
epoch: 0
release: 26.module+an8.7.0+10868+2860c6e5
summary: Plexus Security Dispatcher Component
description: Plexus Security Dispatcher Component
url: https://github.com/codehaus-plexus/plexus-sec-dispatcher
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-sec-dispatcher-1.4-26.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-sec-dispatcher/1.4/26.module+an8.7.0+10868+2860c6e5/noarch/plexus-sec-dispatcher-1.4-26.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 684d49bddce107ab76800159a9954e83206aef4fdf9f63e200c0d563cf7f7813
name: plexus-sec-dispatcher-javadoc
arch: noarch
version: 1.4
epoch: 0
release: 26.module+an8.7.0+10868+2860c6e5
summary: Javadoc for plexus-sec-dispatcher
description: API documentation for plexus-sec-dispatcher.
url: https://github.com/codehaus-plexus/plexus-sec-dispatcher
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-sec-dispatcher-1.4-26.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-sec-dispatcher/1.4/26.module+an8.7.0+10868+2860c6e5/noarch/plexus-sec-dispatcher-javadoc-1.4-26.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: 072ebacf606952d9409c3982a88c1fa7c09719152dca18ce590e5dd40376dfac
name: plexus-utils
arch: noarch
version: 3.1.0
epoch: 0
release: 3.module+an8.7.0+10868+2860c6e5
summary: Plexus Common Utilities
url: https://codehaus-plexus.github.io/plexus-utils/
rpm_license: ASL 1.1 and ASL 2.0 and xpp and BSD and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-utils-3.1.0-3.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
[cell repeats an earlier one in this file: 382 characters]

location_href:
  toplink/packages/plexus-utils/3.1.0/3.module+an8.7.0+10868+2860c6e5/noarch/plexus-utils-3.1.0-3.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: fa67724a719ab017a7f46bb335516b2798ccf6e3ef6e615d93c8f5083206355a
name: plexus-utils-javadoc
arch: noarch
version: 3.1.0
epoch: 0
release: 3.module+an8.7.0+10868+2860c6e5
summary: Javadoc for plexus-utils
description: Javadoc for plexus-utils.
url: https://codehaus-plexus.github.io/plexus-utils/
rpm_license: ASL 1.1 and ASL 2.0 and xpp and BSD and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plexus-utils-3.1.0-3.module+an8.7.0+10868+2860c6e5.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-utils/3.1.0/3.module+an8.7.0+10868+2860c6e5/noarch/plexus-utils-javadoc-3.1.0-3.module+an8.7.0+10868+2860c6e5.noarch.rpm


pkgId: d37db134f375499e1fa0cd0f03a9bd04a81d6c67c8c3244a9c8c8492acd2f53c
name: plexus-velocity
arch: noarch
version: 1.2
epoch: 0
release: 4.module+el8.2.0+10048+55533a4a
summary: Plexus Velocity Component
url: https://codehaus-plexus.github.io/plexus-velocity/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-velocity-1.2-4.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package provides Plexus Velocity component - a wrapper for
  Apache Velocity template engine, which allows easy use of Velocity
  by applications built on top of Plexus container.

location_href:
  toplink/packages/plexus-velocity/1.2/4.module+el8.2.0+10048+55533a4a/noarch/plexus-velocity-1.2-4.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 94e4e5531173729c1f8388b64d7b639b58f0bff8f93f5fc9fa2fcc24dcfe5fb5
name: plexus-velocity-javadoc
arch: noarch
version: 1.2
epoch: 0
release: 4.module+el8.2.0+10048+55533a4a
summary: API documentation for plexus-velocity
description: This package provides API documentation for plexus-velocity.
url: https://codehaus-plexus.github.io/plexus-velocity/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plexus-velocity-1.2-4.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plexus-velocity/1.2/4.module+el8.2.0+10048+55533a4a/noarch/plexus-velocity-javadoc-1.2-4.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 79229e069a2016dd5d7ff8c33bb6cfb95a8c7f7308c2637429d0c051d6cb015a
name: plotutils
arch: x86_64
version: 2.6
epoch: 0
release: 20.el8
summary: GNU vector and raster graphics utilities and libraries
url: http://www.gnu.org/software/plotutils/
rpm_license: GPLv2+ and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: plotutils-2.6-20.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/plotutils/2.6/20.el8/x86_64/plotutils-2.6-20.el8.x86_64.rpm
checksum_type: sha256
description:
  The GNU plotutils package contains software for both programmers and
  technical users. Its centerpiece is libplot, a powerful C/C++ function
  library for exporting 2-D vector graphics in many file formats, both
  vector and raster. It can also do vector graphics animations. Besides
  libplot, the package contains command-line programs for plotting
  scientific data. Many of them use libplot to export graphics


pkgId: 08fb8446e4079f9fd20ea8b2df16819c7168cda13c9c3ef145490fcdc1922fcf
name: plymouth
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Graphical Boot Animation and Logger
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Plymouth provides an attractive graphical boot animation in
  place of the text messages that normally get shown.  Text
  messages are instead redirected to a log file for viewing
  after boot.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: a92047db11aefad5565487dd0cb4cc9299d79887c303d5d34d3f623ae1e0d281
name: plymouth-core-libs
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth core libraries
description:
  This package contains the libply and libply-splash-core libraries
  used by Plymouth.

url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-core-libs-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: f59429bfdd9bacee26626cdd2e423584bfffde5b18207f2a98c724811e7d6f86
name: plymouth-devel
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Libraries and headers for writing Plymouth splash plugins
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the libply and libplybootsplash libraries
  and headers needed to develop 3rd party splash plugins for Plymouth.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-devel-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: dacbb9b6776c4ea68d0ff09f3dbc262df5737e957b869f6cc5c73dc3e4c5e40d
name: plymouth-graphics-libs
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth graphics libraries
description:
  This package contains the libply-splash-graphics library
  used by graphical Plymouth splashes.

url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-graphics-libs-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 26439b272d49268370e9d060818b48119539b4f33765f066c0e9212573875d0d
name: plymouth-plugin-fade-throbber
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Fade-Throbber" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "Fade-In" boot splash plugin for
  Plymouth. It features a centered image that fades in and out
  while other images pulsate around during system boot up.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-plugin-fade-throbber-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 47c065eb7b526302aa8fb5a565615c8ec5909ab3bb00f4b684aa1bde51273870
name: plymouth-plugin-label
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth label plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the label control plugin for
  Plymouth. It provides the ability to render text on
  graphical boot splashes using pango and cairo.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-plugin-label-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 2696d564ac44a1db58b923d86f7a77d982ce099231d76c8618da77f6cc5c2a97
name: plymouth-plugin-script
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "script" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "script" boot splash plugin for
  Plymouth. It features an extensible, scriptable boot splash
  language that simplifies the process of designing custom
  boot splash themes.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-plugin-script-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 956633df847238efb5c2f70ed56d9f7852b143c9a5428bc03ab7f302e4afc203
name: plymouth-plugin-space-flares
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "space-flares" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "space-flares" boot splash plugin for
  Plymouth. It features a corner image with animated flares.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-plugin-space-flares-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 0ba2bf2c06ddfa09d629e41571d9157b08e4810ea9919068614b1f9593679ab0
name: plymouth-plugin-throbgress
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Throbgress" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "throbgress" boot splash plugin for
  Plymouth. It features a centered logo and animated spinner that
  spins repeatedly while a progress bar advances at the bottom of
  the screen.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-plugin-throbgress-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 89b1265a32e465b266ccd2ed6169a0b90fa5259fd7df01692fe3fa8fc753842a
name: plymouth-plugin-two-step
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "two-step" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "two-step" boot splash plugin for
  Plymouth. It features a two phased boot process that starts with
  a progressing animation synced to boot time and finishes with a
  short, fast one-shot animation.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-plugin-two-step-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: d1254477f2cf9dd1179f9bf43fbd055dcb748c595ce23c47d4abc122f37c54d8
name: plymouth-scripts
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth related scripts
description:
  This package contains scripts that help integrate Plymouth with
  the system.

url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-scripts-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 947ced3ea61b2290985193cbe88fbb27bb7c4d58471d35ff3592dac006e4e050
name: plymouth-system-theme
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth default theme
description: This metapackage tracks the current distribution default theme.
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-system-theme-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: ce49c9f9688908d139ef6f7de724e48580f970cd793258267aa807c7a7a0e6f4
name: plymouth-theme-charge
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Charge" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "charge" boot splash theme for
  Plymouth. It is the default theme for Anolis OS.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-theme-charge-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 8425913c49a3d1d2b56199bceced8a313304c0b1df5237d386f4963af9c22fe1
name: plymouth-theme-fade-in
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Fade-In" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "Fade-In" boot splash theme for
  Plymouth. It features a centered logo that fades in and out
  while stars twinkle around the logo during system boot up.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-theme-fade-in-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: f8f709b6ada4fd38c8da78e7d87295427402631223cf26164109945536adabc3
name: plymouth-theme-script
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Script" plugin
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "script" boot splash theme for
  Plymouth. It it is a simple example theme the uses the "script"
  plugin.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-theme-script-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: fe92c7bf4ddf0292ee15b53455ae77f0c2d4709dc4a536b583b2600e9f0618ee
name: plymouth-theme-solar
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Solar" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "Solar" boot splash theme for
  Plymouth. It features a blue flamed sun with animated solar flares.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-theme-solar-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 7048eddd10bf4b538864e6ef0686b4f3c5ec8499b1b071eaa05c51a894192ffa
name: plymouth-theme-spinfinity
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Spinfinity" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "Spinfinity" boot splash theme for
  Plymouth. It features a centered logo and animated spinner that
  spins in the shape of an infinity sign.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-theme-spinfinity-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: 808c709b4d3cd52b100fa56490b5b78b81187806b1636f141e522f91e01a4925
name: plymouth-theme-spinner
arch: x86_64
version: 0.9.4
epoch: 0
release: 11.20200615git1e36e30.0.1.an8
summary: Plymouth "Spinner" theme
url: http://www.freedesktop.org/wiki/Software/Plymouth
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: plymouth-0.9.4-11.20200615git1e36e30.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains the "spinner" boot splash theme for
  Plymouth. It features a small spinner on a dark background.

location_href:
  toplink/packages/plymouth/0.9.4/11.20200615git1e36e30.0.1.an8/x86_64/plymouth-theme-spinner-0.9.4-11.20200615git1e36e30.0.1.an8.x86_64.rpm


pkgId: d0ae6ff58e7cb2982aa44beabc6c81d4dc8d5142452be50a77e71899a1a42b31
name: pmdk-convert
arch: x86_64
version: 1.7
epoch: 0
release: 1.el8
summary: Conversion tool for PMDK pools
url: https://github.com/pmem/pmdk-convert
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pmdk-convert-1.7-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmdk-convert/1.7/1.el8/x86_64/pmdk-convert-1.7-1.el8.x86_64.rpm
checksum_type: sha256
description:
  pmdk-convert is a tool for conversion of PMDK pools from any version
  to any consecutive version. Currently only libpmemobj pools require
  conversion and this tool supports only those kind of pools.


pkgId: 386a70f508ad965302b2be7cf29827e3336990d181bf2bdd1062403e1db57d6f
name: pmempool
arch: x86_64
version: 1.6.1
epoch: 0
release: 1.el8
summary: Utilities for Persistent Memory
url: http://pmem.io/pmdk
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Base
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pmdk-1.6.1-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmdk/1.6.1/1.el8/x86_64/pmempool-1.6.1-1.el8.x86_64.rpm
checksum_type: sha256
description:
  The pmempool is a standalone utility for management and off-line analysis
  of Persistent Memory pools created by PMDK libraries. It provides a set
  of utilities for administration and diagnostics of Persistent Memory pools.
  The pmempool may be useful for troubleshooting by system administrators
  and users of the applications based on PMDK libraries.


pkgId: d4fd962d69af2336c8647add2aa5fc4c2b0f8f496db912c56924f0a6fbc63feb
name: pmix
arch: x86_64
version: 3.2.3
epoch: 0
release: 3.an8
summary: Process Management Interface Exascale (PMIx)
url: https://pmix.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pmix-3.2.3-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmix/3.2.3/3.an8/x86_64/pmix-3.2.3-3.an8.x86_64.rpm
checksum_type: sha256
description:
  The Process Management Interface (PMI) has been used for quite some time as
  a means of exchanging wireup information needed for interprocess
  communication. Two versions (PMI-1 and PMI-2) have been released as part of
  the MPICH effort. While PMI-2 demonstrates better scaling properties than its
  PMI-1 predecessor, attaining rapid launch and wireup of the roughly 1M
  processes executing across 100k nodes expected for exascale operations remains
  challenging.

  PMI Exascale (PMIx) represents an attempt to resolve these questions by
  providing an extended version of the PMI standard specifically designed to
  support clusters up to and including exascale sizes. The overall objective of
  the project is not to branch the existing pseudo-standard definitions - in
  fact, PMIx fully supports both of the existing PMI-1 and PMI-2 APIs - but
  rather to (a) augment and extend those APIs to eliminate some current
  restrictions that impact scalability, and (b) provide a reference
  implementation of the PMI-server that demonstrates the desired level of
  scalability.


pkgId: 6f38acdbefa81cf730d56734ac6cefe1b0a52dee18093aa3b94dff92c1efc310
name: pmix-devel
arch: x86_64
version: 3.2.3
epoch: 0
release: 3.an8
summary: Development files for pmix
url: https://pmix.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pmix-3.2.3-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmix/3.2.3/3.an8/x86_64/pmix-devel-3.2.3-3.an8.x86_64.rpm
checksum_type: sha256
description:
  The pmix-devel package contains libraries and header files for
  developing applications that use pmix.


pkgId: cb98a0089ee0c99db320a30a30294c3068aa3644e161508cf7dc1e6728cd5fdb
name: pmix-pmi
arch: x86_64
version: 3.2.3
epoch: 0
release: 3.an8
summary: The pmix implementation of libpmi and libpmi2
url: https://pmix.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pmix-3.2.3-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmix/3.2.3/3.an8/x86_64/pmix-pmi-3.2.3-3.an8.x86_64.rpm
checksum_type: sha256
description:
  The pmix-pmi package contains the pmix implementation of
  the libpmi and libpmi2 backward-compatibility libraries.


pkgId: 9282e03b0e18291f918e318caa564c81af31ae96dbf91e12b8775d2ef3754100
name: pmix-pmi-devel
arch: x86_64
version: 3.2.3
epoch: 0
release: 3.an8
summary: Development files for pmix-pmi
url: https://pmix.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pmix-3.2.3-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmix/3.2.3/3.an8/x86_64/pmix-pmi-devel-3.2.3-3.an8.x86_64.rpm
checksum_type: sha256
description:
  The pmix-pmi-devel package contains the development files for
  the libpmi and libpmi2 backward-compatibility libraries.


pkgId: 915673fdda7f284a37f3a89399077a4b8f5fbfb0f1a93d008d4994b2ff5fccaf
name: pmix-tools
arch: x86_64
version: 3.2.3
epoch: 0
release: 3.an8
summary: Tools for pmix
url: https://pmix.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pmix-3.2.3-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmix/3.2.3/3.an8/x86_64/pmix-tools-3.2.3-3.an8.x86_64.rpm
checksum_type: sha256
description:
  The pmix-tools package contains for use with PMIx-based RMs and language-
  based starters (e.g., mpirun).

  * pinfo - show MCA params, build info, etc.
  * pps - get list of active nspaces, retrieve status of jobs/nodes/procs
  * pevent - inject an event into the system


pkgId: ec50cd91b628f697f2162e8bbc30fe5191df7c9437738db9166e6bea34adf11d
name: pmreorder
arch: x86_64
version: 1.6.1
epoch: 0
release: 1.el8
summary: Consistency Checker for Persistent Memory
url: http://pmem.io/pmdk
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: __GROUP_SYS_BASE__
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pmdk-1.6.1-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pmdk/1.6.1/1.el8/x86_64/pmreorder-1.6.1-1.el8.x86_64.rpm
checksum_type: sha256
description:
  The pmreorder tool is a collection of python scripts designed to parse
  and replay operations logged by pmemcheck - a persistent memory checking tool.
  Pmreorder performs the store reordering between persistent memory barriers -
  a sequence of flush-fence operations. It uses a consistency checking routine
  provided in the command line options to check whether files are in a consistent state.


pkgId: d57c0fdfada260833b92417b69fb71b86f8e044b81c86ce9e447de8a7769738b
name: pnm2ppa
arch: x86_64
version: 1.04
epoch: 1
release: 40.el8
summary: Drivers for printing to HP PPA printers
url: http://sourceforge.net/projects/pnm2ppa
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pnm2ppa-1.04-40.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pnm2ppa/1.04/40.el8/x86_64/pnm2ppa-1.04-40.el8.x86_64.rpm
checksum_type: sha256
description:
  Pnm2ppa is a color driver for HP PPA host-based printers such as the
  HP710C, 712C, 720C, 722C, 820Cse, 820Cxi, 1000Cse, and 1000Cxi.
  Pnm2ppa accepts Ghostscript output in PPM format and sends it to the
  printer in PPA format.

  Install pnm2ppa if you need to print to a PPA printer.


pkgId: 776b5b64657ff51be71ce645e8006af121836bb9661365782b38df28391d2f40
name: po4a
arch: noarch
version: 0.63
epoch: 0
release: 1.an8
summary: A tool maintaining translations anywhere
url: https://po4a.org/
rpm_license: GPL+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: po4a-0.63-1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/po4a/0.63/1.an8/noarch/po4a-0.63-1.an8.noarch.rpm
checksum_type: sha256
description:
  The po4a (po for anything) project goal is to ease translations (and
  more interestingly, the maintenance of translations) using gettext
  tools on areas where they were not expected like documentation.


pkgId: 215dd27986dceda3c1b87094e45960da6d2952c71ff7f0b863f2d863975642e2
name: podman
arch: x86_64
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: Manage Pods, Containers and Container Images
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  podman (Pod Manager) is a fully featured container engine that is a simple
  daemonless tool.  podman provides a Docker-CLI comparable command line that
  eases the transition from other container engines and allows the management of
  pods, containers and images.  Simply put: alias docker=podman.
  Most podman commands can be run as a regular user, without requiring
  additional privileges.

  podman uses Buildah(1) internally to create container images.
  Both tools share image (not container) storage, hence each can use or
  manipulate images (but not containers) created by the other.

  Manage Pods, Containers and Container Images
  podman Simple management tool for pods, containers and images

location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/x86_64/podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.x86_64.rpm


pkgId: 42fc4ae796abb79cfe77ea05b0133d0e3e246fc823014acf72b7fb7b3ba84779
name: podman-catatonit
arch: x86_64
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: A signal-forwarding process manager for containers
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Catatonit is a /sbin/init program for use within containers. It
  forwards (almost) all signals to the spawned child, tears down
  the container when the spawned child exits, and otherwise
  cleans up other exited processes (zombies).

  This is a reimplementation of other container init programs (such as
  "tini" or "dumb-init"), but uses modern Linux facilities (such as
  signalfd(2)) and has no additional features.

location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/x86_64/podman-catatonit-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.x86_64.rpm


pkgId: 6f384a881ee1ecefbcfc43e522b627389ac11b1cb63579f1c1acc1bc562e25b4
name: podman-docker
arch: noarch
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: Emulate Docker CLI using podman
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package installs a script named docker that emulates the Docker CLI by
  executes podman commands, it also creates links between all Docker CLI man
  pages and podman.

location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/noarch/podman-docker-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.noarch.rpm


pkgId: 333093270d34d02e9621c50881d31a231dd89f344481859549b909c6968beb7c
name: podman-gvproxy
arch: x86_64
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: Go replacement for libslirp and VPNKit
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  A replacement for libslirp and VPNKit, written in pure Go.
  It is based on the network stack of gVisor. Compared to libslirp,
  gvisor-tap-vsock brings a configurable DNS server and
  dynamic port forwarding.

location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/x86_64/podman-gvproxy-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.x86_64.rpm


pkgId: 4d3eff594a00410803ced2bfe25fe514ccec8d09eb4b059e61e9834bfaeb3279
name: podman-plugins
arch: x86_64
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: Plugins for podman
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This plugin sets up the use of dnsmasq on a given CNI network so
  that Pods can resolve each other by name.  When configured,
  the pod and its IP address are added to a network specific hosts file
  that dnsmasq will read in.  Similarly, when a pod
  is removed from the network, it will remove the entry from the hosts
  file.  Each CNI network will have its own dnsmasq instance.

location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/x86_64/podman-plugins-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.x86_64.rpm


pkgId: 46580b906a8178bad1f9515dcb802099c65a655448eaf0920e692dd48a715081
name: podman-remote
arch: x86_64
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: A remote CLI for Podman: A Simple management tool for pods, containers and images
url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  podman-remote provides a local client interacting with a Podman backend
  node through a RESTful API tunneled through a ssh connection. In this context,
  a podman node is a Linux system with Podman installed on it and the API
  service activated.

  Credentials for this session can be passed in using flags, environment
  variables, or in containers.conf.

location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/x86_64/podman-remote-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.x86_64.rpm


pkgId: 8eb1d8a547b537822e02dfe57af82e69728a880a3f422d4de4895a98f872dc77
name: podman-tests
arch: x86_64
version: 4.4.1
epoch: 3
release: 12.0.1.module+an8.8.0+11084+6fc06be3
summary: Tests for podman
description:
  Tests for podman

  This package contains system tests for podman

url: https://podman.io/
rpm_license: ASL 2.0 and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: podman-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/podman/4.4.1/12.0.1.module+an8.8.0+11084+6fc06be3/x86_64/podman-tests-4.4.1-12.0.1.module+an8.8.0+11084+6fc06be3.x86_64.rpm


pkgId: f35c934abbf11f9e36eb6ced79fac6e00856192b7ef8c1fc78462536ad58b513
name: policycoreutils
arch: x86_64
version: 2.9
epoch: 0
release: 24.an8
summary: SELinux policy core utilities
url: https://github.com/SELinuxProject/selinux
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: policycoreutils-2.9-24.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/policycoreutils/2.9/24.an8/x86_64/policycoreutils-2.9-24.an8.x86_64.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  policycoreutils contains the policy core utilities that are required
  for basic operation of a SELinux system.  These utilities include
  load_policy to load policies, setfiles to label filesystems, newrole
  to switch roles.


pkgId: e353fb6bf648f620f4273159c9e498550dd451f378910e4fe2b4841b17f90350
name: policycoreutils-dbus
arch: noarch
version: 2.9
epoch: 0
release: 24.an8
summary: SELinux policy core DBUS api
url: https://github.com/SELinuxProject/selinux
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: policycoreutils-2.9-24.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/policycoreutils/2.9/24.an8/noarch/policycoreutils-dbus-2.9-24.an8.noarch.rpm
checksum_type: sha256
description:
  The policycoreutils-dbus package contains the management DBUS API use to manage
  an SELinux environment.


pkgId: 020985f38f0cb3a50d953b739a17fe870b4d150533f68243783ec799d60d8237
name: policycoreutils-devel
arch: x86_64
version: 2.9
epoch: 0
release: 24.an8
summary: SELinux policy core policy devel utilities
url: https://github.com/SELinuxProject/selinux
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: policycoreutils-2.9-24.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/policycoreutils/2.9/24.an8/x86_64/policycoreutils-devel-2.9-24.an8.x86_64.rpm
checksum_type: sha256
description:
  The policycoreutils-devel package contains the management tools use to develop policy in an SELinux environment.


pkgId: dc913f5213d80792e250a1e511849114b4d6195aeee3134fb5253bc761b0d1f3
name: policycoreutils-newrole
arch: x86_64
version: 2.9
epoch: 0
release: 24.an8
summary: The newrole application for RBAC/MLS
url: https://github.com/SELinuxProject/selinux
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: policycoreutils-2.9-24.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/policycoreutils/2.9/24.an8/x86_64/policycoreutils-newrole-2.9-24.an8.x86_64.rpm
checksum_type: sha256
description:
  RBAC/MLS policy machines require newrole as a way of changing the role
  or level of a logged in user.


pkgId: 74b2ffe7924f402d31dbde0698ed271cb86a0d1a681f4349004652b06ac8731e
name: policycoreutils-python-utils
arch: noarch
version: 2.9
epoch: 0
release: 24.an8
summary: SELinux policy core python utilities
url: https://github.com/SELinuxProject/selinux
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: policycoreutils-2.9-24.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The policycoreutils-python-utils package contains the management tools use to manage
  an SELinux environment.

location_href:
  toplink/packages/policycoreutils/2.9/24.an8/noarch/policycoreutils-python-utils-2.9-24.an8.noarch.rpm


pkgId: b8a50f7b970bd0168e8e07bd4a688d4bf651c7802719151d6420e4ad04bcee35
name: policycoreutils-restorecond
arch: x86_64
version: 2.9
epoch: 0
release: 24.an8
summary: SELinux restorecond utilities
description: The policycoreutils-restorecond package contains the restorecond service.
url: https://github.com/SELinuxProject/selinux
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: policycoreutils-2.9-24.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/policycoreutils/2.9/24.an8/x86_64/policycoreutils-restorecond-2.9-24.an8.x86_64.rpm


pkgId: d860e81734383056e2d9e2c9350677810b773740f79bc0a0981b7a909f416711
name: polkit
arch: x86_64
version: 0.115
epoch: 0
release: 15.an8
summary: An authorization framework
url: http://www.freedesktop.org/wiki/Software/polkit
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Libraries
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: polkit-0.115-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/polkit/0.115/15.an8/x86_64/polkit-0.115-15.an8.x86_64.rpm
checksum_type: sha256
description:
  polkit is a toolkit for defining and handling authorizations.  It is
  used for allowing unprivileged processes to speak to privileged
  processes.


pkgId: 45fd6c7f598b8c2b8a6b27bbf7cb8f6cfa44103cf5cdcb0ed279df7d2c4bb190
name: polkit-gnome
arch: x86_64
version: 0.106
epoch: 0
release: 0.2.20170423gita0763a2.an8
summary: PolicyKit integration for the GNOME desktop
url: http://www.freedesktop.org/wiki/Software/PolicyKit
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: polkit-gnome-0.106-0.2.20170423gita0763a2.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  polkit-gnome provides an authentication agent for PolicyKit
  that matches the look and feel of the GNOME desktop.

location_href:
  toplink/packages/polkit-gnome/0.106/0.2.20170423gita0763a2.an8/x86_64/polkit-gnome-0.106-0.2.20170423gita0763a2.an8.x86_64.rpm


pkgId: a87d76e757b42ee9bd67c68191ed791e5856d2e58facaa43dd68d6167d8ba007
name: polkit-pkla-compat
arch: x86_64
version: 0.1
epoch: 0
release: 12.el8
summary: Rules for polkit to add compatibility with pklocalauthority
url: https://pagure.io/polkit-pkla-compat
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: polkit-pkla-compat-0.1-12.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/polkit-pkla-compat/0.1/12.el8/x86_64/polkit-pkla-compat-0.1-12.el8.x86_64.rpm
checksum_type: sha256
description:
  A polkit JavaScript rule and associated helpers that mostly provide
  compatibility with the .pkla file format supported in polkit <= 0.105 for users
  of later polkit releases.


pkgId: 105c47dc877ed9a775a224f1522f4d135aed1a819d80a3f69f14d852c1e4be42
name: poppler-data
arch: noarch
version: 0.4.9
epoch: 0
release: 1.el8
summary: Encoding files for use with poppler
url: https://poppler.freedesktop.org/
rpm_license: BSD and GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: poppler-data-0.4.9-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/poppler-data/0.4.9/1.el8/noarch/poppler-data-0.4.9-1.el8.noarch.rpm
checksum_type: sha256
description:
  This package consists of encoding files for use with poppler. The encoding
  files are optional and poppler will automatically read them if they are present.

  When installed, the encoding files enables poppler to correctly render both CJK
  and Cyrrilic characters properly.


pkgId: 6151b0111be22fc5d2abcac232ea92799302d902acff225053a1b70dbdaae2a2
name: poppler-data-devel
arch: noarch
version: 0.4.9
epoch: 0
release: 1.el8
summary: Devel files for poppler-data
url: https://poppler.freedesktop.org/
rpm_license: BSD and GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: poppler-data-0.4.9-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/poppler-data/0.4.9/1.el8/noarch/poppler-data-devel-0.4.9-1.el8.noarch.rpm
checksum_type: sha256
description:
  This sub-package currently contains only pkgconfig file, which can be used with
  pkgconfig utility allowing your software to be build with poppler-data.


pkgId: 13d4ec228ea1696291497e26e65a0868c772bccd42b8d14102dac69bbb76510a
name: poppler-devel
arch: x86_64
version: 20.11.0
epoch: 0
release: 6.0.1.an8
summary: Libraries and headers for poppler
url: http://poppler.freedesktop.org/
rpm_license: (GPLv2 or GPLv3) and GPLv2+ and LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: poppler-20.11.0-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/poppler/20.11.0/6.0.1.an8/x86_64/poppler-devel-20.11.0-6.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  You should install the poppler-devel package if you would like to
  compile applications based on poppler.


pkgId: 1ca2d33edde956c98fec4bb2e04dab32eefd372d9ba936a5a8876431896c073b
name: popt
arch: x86_64
version: 1.18
epoch: 0
release: 1.0.1.an8
summary: C library for parsing command line parameters
url: https://github.com/rpm-software-management/popt/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: popt-1.18-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/popt/1.18/1.0.1.an8/x86_64/popt-1.18-1.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Popt is a C library for parsing command line parameters. Popt was
  heavily influenced by the getopt() and getopt_long() functions, but
  it improves on them by allowing more powerful argument expansion.
  Popt can parse arbitrary argv[] style arrays and automatically set
  variables based on command line arguments. Popt allows command line
  arguments to be aliased via configuration files and includes utility
  functions for parsing arbitrary strings into argv[] arrays using
  shell-like rules.


pkgId: 4eca9f3bc6df7213fa8c8e86c502128ac263ce9eb44351d43752bda16bebf9b0
name: popt-devel
arch: x86_64
version: 1.18
epoch: 0
release: 1.0.1.an8
summary: Development files for the popt library
url: https://github.com/rpm-software-management/popt/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: popt-1.18-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/popt/1.18/1.0.1.an8/x86_64/popt-devel-1.18-1.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The popt-devel package includes header files and libraries necessary
  for developing programs which use the popt C library. It contains the
  API documentation of the popt library, too.


pkgId: e7763908dea293fb7ee6854665582d584b52e23fce9586adb7a2adc62f3397dd
name: popt-static
arch: x86_64
version: 1.18
epoch: 0
release: 1.0.1.an8
summary: Static library for parsing command line parameters
url: https://github.com/rpm-software-management/popt/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: popt-1.18-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/popt/1.18/1.0.1.an8/x86_64/popt-static-1.18-1.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The popt-static package includes static libraries of the popt library.
  Install it if you need to link statically with libpopt.


pkgId: df9a7ff28e55bde93459a417e359cfc1b66750e545c70e9537d35932d95ad8e3
name: portreserve
arch: x86_64
version: 0.0.5
epoch: 0
release: 19.0.1.an8
summary: TCP port reservation utility
url: http://cyberelk.net/tim/portreserve/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: portreserve-0.0.5-19.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/portreserve/0.0.5/19.0.1.an8/x86_64/portreserve-0.0.5-19.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The portreserve program aims to help services with well-known ports that
  lie in the portmap range.  It prevents portmap from a real service's port
  by occupying it itself, until the real service tells it to release the
  port (generally in the init script).


pkgId: 8b71023a42071e9e7bdb104468fb866a10190afebf9da623d2291e55398287d5
name: postfix-cdb
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix CDB map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-cdb-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for CDB maps in Postfix. If you plan to use CDB
  maps with Postfix, you need this.


pkgId: 851f595f537521701e92b72782fddb41ff40fd58ddd2af84a461dacaaae495bf
name: postfix-ldap
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix LDAP map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-ldap-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for LDAP maps in Postfix. If you plan to use LDAP
  maps with Postfix, you need this.


pkgId: 737015ecd3bc4d9aecdf8063fc03ea8a3f0b30d1a6bc615386d3d577b034d959
name: postfix-lmdb
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix LDMB map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-lmdb-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for LMDB maps in Postfix. If you plan to use LMDB
  maps with Postfix, you need this.


pkgId: 9924d52ab2fa7b7b43dfa06100ff583d5fab18a097937515b9afee718e182dea
name: postfix-mysql
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix MySQL map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-mysql-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for MySQL maps in Postfix. If you plan to use MySQL
  maps with Postfix, you need this.


pkgId: 4a9b9a606fc14c652a6d78f5b4329dffdfa21e4863b1e953c3b2e9e8b98c8a76
name: postfix-pcre
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix PCRE map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-pcre-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for PCRE maps in Postfix. If you plan to use PCRE
  maps with Postfix, you need this.


pkgId: 25d718ab7bc3204eeacb4e391da916ee03890cb9b9bdb3b20a73f6351927ce76
name: postfix-perl-scripts
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix utilities written in perl
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-perl-scripts-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains perl scripts pflogsumm and qshape.

  Pflogsumm is a log analyzer/summarizer for the Postfix MTA. It is
  designed to provide an over-view of Postfix activity. Pflogsumm
  generates summaries and, in some cases, detailed reports of mail
  server traffic volumes, rejected and bounced email, and server
  warnings, errors and panics.

  qshape prints Postfix queue domain and age distribution.


pkgId: 74e74c33385fcee93e272bf6b4729d45ca5e3dc35d83bf63ee59eecf353766c5
name: postfix-pgsql
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix PostgreSQL map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-pgsql-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for PostgreSQL  maps in Postfix. If you plan to use
  PostgreSQL maps with Postfix, you need this.


pkgId: 9bc774de5a58fa66b626801e6d648327134214b1003b3db8f357d824a07e6f59
name: postfix-sqlite
arch: x86_64
version: 3.5.8
epoch: 2
release: 4.an8
summary: Postfix SQLite map support
url: http://www.postfix.org
rpm_license: (IBM and GPLv2+) or (EPL-2.0 and GPLv2+)
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: postfix-3.5.8-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postfix/3.5.8/4.an8/x86_64/postfix-sqlite-3.5.8-4.an8.x86_64.rpm
checksum_type: sha256
description:
  This provides support for SQLite maps in Postfix. If you plan to use SQLite
  maps with Postfix, you need this.


pkgId: df1835cc64ba66f8212f7d8368cc848a72055ac355efc7e008e11dd783cdc292
name: postgresql
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: PostgreSQL client programs
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management system (DBMS).
  The base postgresql package contains the client programs that you'll need to
  access a PostgreSQL DBMS server, as well as HTML documentation for the whole
  system.  These client programs can be located on the same machine as the
  PostgreSQL server, or on a remote machine that accesses a PostgreSQL server
  over a network connection.  The PostgreSQL server can be found in the
  postgresql-server sub-package.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: b9c2f9171e649abd1c4265a26180b635d72d9f4f05ff81dbb87f37b0ca605e6b
name: postgresql-contrib
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: Extension modules distributed with PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-contrib package contains various extension modules that are
  included in the PostgreSQL distribution.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-contrib-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: fcbfb26aae2948d96a344281f21ba296d743c569adb39bc89c96cc12093a6174
name: postgresql-docs
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: Extra documentation for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-docs package contains some additional documentation for
  PostgreSQL.  Currently, this includes the main documentation in PDF format
  and source files for the PostgreSQL tutorial.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-docs-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: fd81dfb86251ccab5ac6871194bfb61e2fbbc10abc18e459ec6298ba79644283
name: postgresql-jdbc
arch: noarch
version: 42.2.14
epoch: 0
release: 2.an8
summary: JDBC driver for PostgreSQL
url: http://jdbc.postgresql.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: postgresql-jdbc-42.2.14-2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/postgresql-jdbc/42.2.14/2.an8/noarch/postgresql-jdbc-42.2.14-2.an8.noarch.rpm
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management
  system. The postgresql-jdbc package includes the .jar files needed for
  Java programs to access a PostgreSQL database.


pkgId: 65cbcefc9a10baa3f98486e317eb0a79677226bf19c80042df2eb713a3022dfa
name: postgresql-jdbc-javadoc
arch: noarch
version: 42.2.14
epoch: 0
release: 2.an8
summary: API docs for postgresql-jdbc
description: This package contains the API Documentation for postgresql-jdbc.
url: http://jdbc.postgresql.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: postgresql-jdbc-42.2.14-2.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/postgresql-jdbc/42.2.14/2.an8/noarch/postgresql-jdbc-javadoc-42.2.14-2.an8.noarch.rpm


pkgId: 23e3e24ca5ec001880148db9085ff3c455ba1eae54151d5661d4547085fdff71
name: postgresql-odbc
arch: x86_64
version: 10.03.0000
epoch: 0
release: 3.0.1.an8_6
summary: PostgreSQL ODBC driver
url: https://odbc.postgresql.org/
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Databases
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: postgresql-odbc-10.03.0000-3.0.1.an8_6.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package includes the driver needed for applications to access a
  PostgreSQL system via ODBC (Open Database Connectivity).

location_href:
  toplink/packages/postgresql-odbc/10.03.0000/3.0.1.an8_6/x86_64/postgresql-odbc-10.03.0000-3.0.1.an8_6.x86_64.rpm


pkgId: e9da4617901bf588948da5cc83943b01b913341c5065243a836e07443af19335
name: postgresql-odbc-tests
arch: x86_64
version: 10.03.0000
epoch: 0
release: 3.0.1.an8_6
summary: Testsuite files for psqlodbc
url: https://odbc.postgresql.org/
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Databases
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: postgresql-odbc-10.03.0000-3.0.1.an8_6.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-odbc-tests package contains files needed for various tests for
  the PostgreSQL unixODBC driver.

location_href:
  toplink/packages/postgresql-odbc/10.03.0000/3.0.1.an8_6/x86_64/postgresql-odbc-tests-10.03.0000-3.0.1.an8_6.x86_64.rpm


pkgId: 6a997a0d91e21b7772fa3a148d3b6c18f9d5d1f8305746205e88b383702b14c7
name: postgresql-plperl
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: The Perl procedural language for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-plperl package contains the PL/Perl procedural language,
  which is an extension to the PostgreSQL database server.
  Install this if you want to write database functions in Perl.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-plperl-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: 1d7faea9d02ab34981e1c04b829d5d9a539401cab8d20171c50ae33e153a4bc9
name: postgresql-plpython3
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: The Python3 procedural language for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-plpython3 package contains the PL/Python3 procedural language,
  which is an extension to the PostgreSQL database server.
  Install this if you want to write database functions in Python 3.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-plpython3-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: 28887a7d2d0441e328455019a5b8df1f1dfdc6ba84ed67f285e966309041887f
name: postgresql-pltcl
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: The Tcl procedural language for PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-pltcl package contains the PL/Tcl procedural language,
  which is an extension to the PostgreSQL database server.
  Install this if you want to write database functions in Tcl.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-pltcl-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: 7a6dc487e3d8560398601557ca46a7747361e06b9c11797dd1a512a19967685b
name: postgresql-private-devel
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: PostgreSQL development header files for this build of PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-private-devel package contains the header files and libraries
  needed to compile C or C++ applications which will directly interact
  with a PostgreSQL database management server.
  You need to install this package if you want to develop applications which
  will interact with a PostgreSQL server.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-private-devel-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: 0ac51751e11989b0a469345d08f1327a078a221a82d45e656a2ecfe23ebb47cf
name: postgresql-private-libs
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: The shared libraries required only for this build of PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Databases
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-private-libs package provides the shared libraries for this
  build of PostgreSQL server and plugins build with this version of server.
  For shared libraries used by client packages that need to connect to a
  PostgreSQL server, install libpq package instead.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-private-libs-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: de707df21485847b7284b9a588a3a12544db2600b3eb0bae3f1b8ccefb62b709
name: postgresql-server
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: The programs needed to create and run a PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PostgreSQL is an advanced Object-Relational database management system (DBMS).
  The postgresql-server package contains the programs needed to create
  and run a PostgreSQL server, which will in turn allow you to create
  and maintain PostgreSQL databases.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-server-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: 83309350d18bdb3f63c409946f4a9244bcc7df36150cb7d29c0e18bdc927b8c1
name: postgresql-server-devel
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: PostgreSQL development header files and libraries
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-server-devel package contains the header files and configuration
  needed to compile PostgreSQL server extension.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-server-devel-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: fb195e88bf4ffe02eb8773c797991bc7aec499d28e66a1fa18ec1585ffb833d0
name: postgresql-static
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: Statically linked PostgreSQL libraries
description:
  Statically linked PostgreSQL libraries that do not have dynamically linked
  counterparts.

url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-static-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: 16d4dcbdb8a38b38cc2842f61c75188b7457b2c4646f9f9b78301d8fcbc11cb7
name: postgresql-test
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: The test suite distributed with PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-test package contains files needed for various tests for the
  PostgreSQL database management system, including regression tests and
  benchmarks.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-test-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: ef9743d81fc38c66c2ef4951e52ed5fee708c81cc9d1f8813465244bb83ee738
name: postgresql-test-rpm-macros
arch: noarch
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: Convenience RPM macros for build-time testing against PostgreSQL server
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package is meant to be added as BuildRequires: dependency of other packages
  that want to run build-time testsuite against running PostgreSQL server.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/noarch/postgresql-test-rpm-macros-15.5-1.0.1.module+an8.8.0+11153+48efe976.noarch.rpm


pkgId: 434ef9a1d7ed9180792379a905a2a8e7ca5d8a2cbd257b26df467480a73b0b23
name: postgresql-upgrade
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: Support for upgrading from the previous major release of PostgreSQL
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-upgrade package contains the pg_upgrade utility and supporting
  files needed for upgrading a PostgreSQL database from the previous major
  version of PostgreSQL.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-upgrade-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: d240b06a3e67dbc9c4a5e5cde7326afdd50c849a7787f547f9bcea35c1fbf4e3
name: postgresql-upgrade-devel
arch: x86_64
version: 15.5
epoch: 0
release: 1.0.1.module+an8.8.0+11153+48efe976
summary: Support for build of extensions required for upgrade process
url: http://www.postgresql.org/
rpm_license: PostgreSQL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: postgresql-15.5-1.0.1.module+an8.8.0+11153+48efe976.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The postgresql-devel package contains the header files and libraries
  needed to compile C or C++ applications which are necessary in upgrade
  process.

location_href:
  toplink/packages/postgresql/15.5/1.0.1.module+an8.8.0+11153+48efe976/x86_64/postgresql-upgrade-devel-15.5-1.0.1.module+an8.8.0+11153+48efe976.x86_64.rpm


pkgId: cf3d85b050fd6580ea8da4603e0cd4464d890e956292ff0fa1c38c7f8598324b
name: potrace
arch: x86_64
version: 1.15
epoch: 0
release: 3.an8
summary: Transform bitmaps into vector graphics
url: http://potrace.sourceforge.net
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Multimedia
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: potrace-1.15-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/potrace/1.15/3.an8/x86_64/potrace-1.15-3.an8.x86_64.rpm
checksum_type: sha256
description:
  Potrace is a utility for tracing a bitmap, which means, transforming a bitmap
  into a smooth, scalable image. The input is a bitmap (PBM, PGM, PPM, or BMP
  format), and the default output is an encapsulated PostScript file (EPS).
  A typical use is to create EPS files from scanned data, such as company or
  university logos, handwritten notes, etc. The resulting image is not "jaggy"
  like a bitmap, but smooth. It can then be rendered at any resolution.

  Potrace can currently produce the following output formats: EPS, PostScript,
  PDF, SVG (scalable vector graphics), Xfig, Gimppath, and PGM (for easy
  antialiasing). Additional backends might be added in the future.

  Mkbitmap is a program distributed with Potrace which can be used to pre-process
  the input for better tracing behavior on greyscale and color images.


pkgId: ce2f597a278ed987fae6826209f4424ff8f835a0ee8d53b09eb7ec212310ae0e
name: power-profiles-daemon
arch: x86_64
version: 0.11.1
epoch: 0
release: 1.an8
summary: Makes power profiles handling available over D-Bus
description: Makes power profiles handling available over D-Bus.
url: https://gitlab.freedesktop.org/hadess/power-profiles-daemon
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: power-profiles-daemon-0.11.1-1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/power-profiles-daemon/0.11.1/1.an8/x86_64/power-profiles-daemon-0.11.1-1.an8.x86_64.rpm


pkgId: 515378a44acdfe8affc0985d812fccbcb13345cf51d7da9c49f2b11637aef8e1
name: power-profiles-daemon-docs
arch: noarch
version: 0.11.1
epoch: 0
release: 1.an8
summary: Documentation for power-profiles-daemon
description: This package contains the documentation for power-profiles-daemon.
url: https://gitlab.freedesktop.org/hadess/power-profiles-daemon
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: power-profiles-daemon-0.11.1-1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/power-profiles-daemon/0.11.1/1.an8/noarch/power-profiles-daemon-docs-0.11.1-1.an8.noarch.rpm


pkgId: f5b310f73856e092c898f7ada00e5f4833875faf9161771b98d44b9ed1856d54
name: powermock-api-easymock
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: PowerMock EasyMock API module
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the PowerMock EasyMock API extension.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-api-easymock-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 2a76c501372bc8d51495dac4f6cae62f8e9afba52bc3ecbdb78287b76ff62dbd
name: powermock-api-mockito
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: PowerMock Mockito API module
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0 and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the PowerMock Mockito API extension.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-api-mockito-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: c316a6a51b1b215de495e01794e5f919c6f7e4b157847ee2b4cd6c213b348415
name: powermock-api-support
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: PowerMock API support module
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains support code for the PowerMock API extensions.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-api-support-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 6b335403d06e902dabe7949f205122e7dd860f3e5e0691747f180521d1a78316
name: powermock-common
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: Common files for PowerMock
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains common files for all PowerMock modules.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-common-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: e52b01236d32a9f527aecad667644502850e7f9745f246a30cebfad2518a976e
name: powermock-core
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: Core module of PowerMock
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the core module of PowerMock.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-core-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: e2dd1d79cd896a04ab2e0823d915b8ccdb0d3c754ef7c9e35312111073f4c4ff
name: powermock-javadoc
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: JavaDocs for powermock
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the API documentation for powermock.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-javadoc-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: d59b3e9016bda78e7212d0bcbb1de9949054fa9e676d4cdb4e36f20752f148a1
name: powermock-junit4
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: JUnit4 common module of PowerMock
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the JUnit4 module of PowerMock.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-junit4-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: b0e6e62c5740db0af2f086eed7db750cb41a449fa4df8f42f7371b1bc8eab99e
name: powermock-reflect
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: Reflection module of PowerMock
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the reflection module of PowerMock.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-reflect-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: 7d54a303ec99277a6d4e1d43cc3f59e551bf002902365bc4ed830e5c1eee9d86
name: powermock-testng
arch: noarch
version: 1.6.5
epoch: 0
release: 9.module+el8.2.0+10048+55533a4a
summary: PowerMock module for TestNG.
url: https://github.com/jayway/powermock
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: powermock-1.6.5-9.module+el8.2.0+10048+55533a4a.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  PowerMock is a framework that extend other mock libraries
  such as EasyMock with more powerful capabilities. PowerMock uses a
  custom classloader and bytecode manipulation to enable mocking of
  static methods, constructors, final classes and methods, private
  methods, removal of static initializers and more.

  This package contains the PowerMock TestNG extension.

location_href:
  toplink/packages/powermock/1.6.5/9.module+el8.2.0+10048+55533a4a/noarch/powermock-testng-1.6.5-9.module+el8.2.0+10048+55533a4a.noarch.rpm


pkgId: b3e6cd594ff7f4a62dc43067b7ed8b2bf793ac20612d2c675460c09c0179cfe6
name: powertop
arch: x86_64
version: 2.15
epoch: 0
release: 1.0.1.an8
summary: Power consumption monitor
url: http://01.org/powertop/
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: powertop-2.15-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/powertop/2.15/1.0.1.an8/x86_64/powertop-2.15-1.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  PowerTOP is a tool that finds the software component(s) that make your
  computer use more power than necessary while it is idle.


pkgId: 796940c3c3d1f174e51ccb358b29ad1ecc40a4e93dd6c5ac7cf147f62cc02478
name: ppp
arch: x86_64
version: 2.4.7
epoch: 0
release: 26.0.2.an8
summary: The Point-to-Point Protocol daemon
url: http://www.samba.org/ppp
rpm_license: BSD and LGPLv2+ and GPLv2+ and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Daemons
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: ppp-2.4.7-26.0.2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/ppp/2.4.7/26.0.2.an8/x86_64/ppp-2.4.7-26.0.2.an8.x86_64.rpm
checksum_type: sha256
description:
  The ppp package contains the PPP (Point-to-Point Protocol) daemon and
  documentation for PPP support. The PPP protocol provides a method for
  transmitting datagrams over serial point-to-point links. PPP is
  usually used to dial in to an ISP (Internet Service Provider) or other
  organization over a modem and phone line.


pkgId: a40369f020d99b4af389161914aec93a03ef42c3dfb61655297ba61d2c1163f3
name: pptp
arch: x86_64
version: 1.10.0
epoch: 0
release: 4.0.1.an8
summary: Point-to-Point Tunneling Protocol (PPTP) Client
url: http://pptpclient.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Internet
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pptp-1.10.0-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pptp/1.10.0/4.0.1.an8/x86_64/pptp-1.10.0-4.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Client for the proprietary Microsoft Point-to-Point Tunneling
  Protocol, PPTP. Allows connection to a PPTP based VPN as used
  by employers and some cable and ADSL service providers.


pkgId: 9cdabc4f043ce2e6c06a80cbdfca86eb3ad9d7cf7a271b1ff3d6d6161bdefbc7
name: prefixdevname
arch: x86_64
version: 0.1.0
epoch: 0
release: 6.0.1.an8
summary: Udev helper utility that provides network interface naming using user defined prefix
url: https://www.github.com/msekletar/prefixdevname
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: prefixdevname-0.1.0-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/prefixdevname/0.1.0/6.0.1.an8/x86_64/prefixdevname-0.1.0-6.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package provides udev helper utility that tries to consistently name all ethernet NICs using
  user defined prefix (e.g. net.ifnames.prefix=net produces NIC names net0, net1, ...). Utility is
  called from udev rule and it determines NIC name and writes out configuration file for udev's
  net_setup_link built-in (e.g. /etc/systemd/network/71-net-ifnames-prefix-net0.link).


pkgId: 22920971b4646d4121e2b3e836505426b7c9447d0432bc14eb641738284620ef
name: procmail
arch: x86_64
version: 3.22
epoch: 0
release: 47.0.1.an8
summary: Mail processing program
url: http://www.procmail.org
rpm_license: GPLv2+ or Artistic
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Internet
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: procmail-3.22-47.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/procmail/3.22/47.0.1.an8/x86_64/procmail-3.22-47.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Procmail can be used to create mail-servers, mailing lists, sort your
  incoming mail into separate folders/files (real convenient when subscribing
  to one or more mailing lists or for prioritising your mail), preprocess
  your mail, start any programs upon mail arrival (e.g. to generate different
  chimes on your workstation for different types of mail) or selectively
  forward certain incoming mail automatically to someone.


pkgId: ef03c6fbc071d6490f1e654072e9eb630850b682a0da1b64868cebcec0eb7fee
name: procps-ng
arch: x86_64
version: 3.3.15
epoch: 0
release: 9.0.1.an8
summary: System and process monitoring utilities
url: https://sourceforge.net/projects/procps-ng/
rpm_license: GPL+ and GPLv2 and GPLv2+ and GPLv3+ and LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: procps-ng-3.3.15-9.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/procps-ng/3.3.15/9.0.1.an8/x86_64/procps-ng-3.3.15-9.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The procps package contains a set of system utilities that provide
  system information. Procps includes ps, free, skill, pkill, pgrep,
  snice, tload, top, uptime, vmstat, pidof, pmap, slabtop, w, watch
  and pwdx.
  The ps command displays a snapshot of running processes. The top command
  provides a repetitive update of the statuses of running processes.
  The free command displays the amounts of free and used memory on your
  system. The skill command sends a terminate command (or another
  specified signal) to a specified set of processes. The snice
  command is used to change the scheduling priority of specified
  processes. The tload command prints a graph of the current system
  load average to a specified tty. The uptime command displays the
  current time, how long the system has been running, how many users
  are logged on, and system load averages for the past one, five,
  and fifteen minutes. The w command displays a list of the users
  who are currently logged on and what they are running. The watch
  program watches a running program. The vmstat command displays
  virtual memory statistics about processes, memory, paging, block
  I/O, traps, and CPU activity. The pwdx command reports the current
  working directory of a process or processes.


pkgId: 78cb0ffb7d65f515b427a28b7b1b7f29415ca79e8f4778c378a74dde18939271
name: prometheus-jmx-exporter
arch: noarch
version: 0.12.0
epoch: 0
release: 9.an8
summary: Prometheus JMX Exporter
url: https://github.com/prometheus/jmx_exporter/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: prometheus-jmx-exporter-0.12.0-9.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  JMX to Prometheus exporter: a collector that can be configured to scrape
  and expose MBeans of a JMX target. This exporter is intended to be run as
  a Java Agent, exposing a HTTP server and serving metrics of the local JVM.

location_href:
  toplink/packages/prometheus-jmx-exporter/0.12.0/9.an8/noarch/prometheus-jmx-exporter-0.12.0-9.an8.noarch.rpm


pkgId: ae4450cc36863dbd106d89ccf901bcbdf62f3da516128f5e06554485daac16fd
name: prometheus-jmx-exporter-openjdk11
arch: noarch
version: 0.12.0
epoch: 0
release: 9.an8
summary: OpenJDK 11 binding for prometheus-jmx-exporter
description: OpenJDK 11 binding package for prometheus-jmx-exporter
url: https://github.com/prometheus/jmx_exporter/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: prometheus-jmx-exporter-0.12.0-9.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/prometheus-jmx-exporter/0.12.0/9.an8/noarch/prometheus-jmx-exporter-openjdk11-0.12.0-9.an8.noarch.rpm


pkgId: 3e33c0ff8e79d15dc0247cb2ab0df97c960b793c29c6bc81272ee916654f6da2
name: prometheus-jmx-exporter-openjdk17
arch: noarch
version: 0.12.0
epoch: 0
release: 9.an8
summary: OpenJDK 17 binding for prometheus-jmx-exporter
description: OpenJDK 17 binding package for prometheus-jmx-exporter
url: https://github.com/prometheus/jmx_exporter/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: prometheus-jmx-exporter-0.12.0-9.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/prometheus-jmx-exporter/0.12.0/9.an8/noarch/prometheus-jmx-exporter-openjdk17-0.12.0-9.an8.noarch.rpm


pkgId: e0c2685900683414a0d7fd4e1016ceaa37fbb4fd8ddb2fb6f9ccc209322d271c
name: prometheus-jmx-exporter-openjdk8
arch: noarch
version: 0.12.0
epoch: 0
release: 9.an8
summary: OpenJDK 1.8.0 binding for prometheus-jmx-exporter
description: OpenJDK 1.8.0 binding package for prometheus-jmx-exporter
url: https://github.com/prometheus/jmx_exporter/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: prometheus-jmx-exporter-0.12.0-9.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/prometheus-jmx-exporter/0.12.0/9.an8/noarch/prometheus-jmx-exporter-openjdk8-0.12.0-9.an8.noarch.rpm


pkgId: 9fb01e0236b1704e97c8b1470fe5d4e949173de70cf400306b58233531d1f4bf
name: prometheus-simpleclient-java
arch: noarch
version: 0.6.0
epoch: 0
release: 5.el8
summary: Prometheus JVM Client
description: Prometheus instrumentation library for JVM applications.
url: https://github.com/prometheus/client_java/
rpm_license: ASL 2.0 and CC0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: prometheus-simpleclient-java-0.6.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/prometheus-simpleclient-java/0.6.0/5.el8/noarch/prometheus-simpleclient-java-0.6.0-5.el8.noarch.rpm


pkgId: d12ad95e3ab88916f969eba2df38f92205aa008cd464db9765ac33bfcb634233
name: prometheus-simpleclient-java-tests
arch: noarch
version: 0.6.0
epoch: 0
release: 5.el8
summary: Tests jar for prometheus-simpleclient-java
description: This package contains Tests jar for prometheus-simpleclient-java.
url: https://github.com/prometheus/client_java/
rpm_license: ASL 2.0 and CC0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: prometheus-simpleclient-java-0.6.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/prometheus-simpleclient-java/0.6.0/5.el8/noarch/prometheus-simpleclient-java-tests-0.6.0-5.el8.noarch.rpm


pkgId: f855a36041f7678620cd2581ddc0efac327b091838b3410896bbdf5d680db381
name: properties-maven-plugin
arch: noarch
version: 1.0.0
epoch: 0
release: 5.el8
summary: Properties Maven Plugin
url: http://www.mojohaus.org/properties-maven-plugin/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: properties-maven-plugin-1.0.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Properties Maven Plugin is here to make life a little easier when dealing
  with properties. It provides goals to read and write properties from files.

location_href:
  toplink/packages/properties-maven-plugin/1.0.0/5.el8/noarch/properties-maven-plugin-1.0.0-5.el8.noarch.rpm


pkgId: aa8d9c1b7fa525754e75823ddb2df0933dbdd4673d565fac96461cfeed230054
name: properties-maven-plugin-javadoc
arch: noarch
version: 1.0.0
epoch: 0
release: 5.el8
summary: Javadoc for properties-maven-plugin
description: This package contains javadoc for properties-maven-plugin.
url: http://www.mojohaus.org/properties-maven-plugin/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: properties-maven-plugin-1.0.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/properties-maven-plugin/1.0.0/5.el8/noarch/properties-maven-plugin-javadoc-1.0.0-5.el8.noarch.rpm


pkgId: 0ca5d6073f003a9afb1e241f946f5ddbe811b47f7e69085f239f882fac50a435
name: protobuf
arch: x86_64
version: 3.5.0
epoch: 0
release: 15.an8
summary: Protocol Buffers - Google's data interchange format
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: protobuf-3.5.0-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf/3.5.0/15.an8/x86_64/protobuf-3.5.0-15.an8.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient
  yet extensible format. Google uses Protocol Buffers for almost all of
  its internal RPC protocols and file formats.

  Protocol buffers are a flexible, efficient, automated mechanism for
  serializing structured data – think XML, but smaller, faster, and
  simpler. You define how you want your data to be structured once, then
  you can use special generated source code to easily write and read
  your structured data to and from a variety of data streams and using a
  variety of languages. You can even update your data structure without
  breaking deployed programs that are compiled against the "old" format.


pkgId: 15bd06f8fb84c661da8271bf39574ac2d66d3ebf5e0a9ddef3fad68641e18f9b
name: protobuf-c
arch: x86_64
version: 1.3.0
epoch: 0
release: 6.an8
summary: C bindings for Google's Protocol Buffers
url: https://github.com/protobuf-c/protobuf-c
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: protobuf-c-1.3.0-6.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf-c/1.3.0/6.an8/x86_64/protobuf-c-1.3.0-6.an8.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient yet
  extensible format. This package provides a code generator and run-time
  libraries to use Protocol Buffers from pure C (not C++).

  It uses a modified version of protoc called protoc-c.


pkgId: a90050d06909453bc1d651e97e445a676d8f74856b2fb4064dc06b4256e1bc7d
name: protobuf-c-compiler
arch: x86_64
version: 1.3.0
epoch: 0
release: 6.an8
summary: Protocol Buffers C compiler
url: https://github.com/protobuf-c/protobuf-c
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: protobuf-c-1.3.0-6.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf-c/1.3.0/6.an8/x86_64/protobuf-c-compiler-1.3.0-6.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains a modified version of the Protocol Buffers
  compiler for the C programming language called protoc-c.


pkgId: a760baf1ca43e3ad23af0fd637596f04a308c2abbef871b60eb20d40483c4214
name: protobuf-emacs
arch: noarch
version: 3.5.0
epoch: 0
release: 15.an8
summary: Emacs mode for Google Protocol Buffers descriptions
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: protobuf-3.5.0-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf/3.5.0/15.an8/noarch/protobuf-emacs-3.5.0-15.an8.noarch.rpm
checksum_type: sha256
description:
  This package contains syntax highlighting for Google Protocol Buffers
  descriptions in the Emacs editor.


pkgId: 347bc96df07c02a5413e799513d4154c048dada56b80c769fb9e3856ef3e0d93
name: protobuf-emacs-el
arch: noarch
version: 3.5.0
epoch: 0
release: 15.an8
summary: Elisp source files for Google protobuf Emacs mode
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: protobuf-3.5.0-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf/3.5.0/15.an8/noarch/protobuf-emacs-el-3.5.0-15.an8.noarch.rpm
checksum_type: sha256
description:
  This package contains the elisp source files for protobuf-emacs
  under GNU Emacs. You do not need to install this package to use
  protobuf-emacs.


pkgId: f264ad29210faa90a8a13e3aa1f1f792de9c5044849c5d368dc2911eb943710b
name: protobuf-lite
arch: x86_64
version: 3.5.0
epoch: 0
release: 15.an8
summary: Protocol Buffers LITE_RUNTIME libraries
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: protobuf-3.5.0-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf/3.5.0/15.an8/x86_64/protobuf-lite-3.5.0-15.an8.x86_64.rpm
checksum_type: sha256
description:
  Protocol Buffers built with optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 56af346ab5f54139432670a9737cdeceb3a7774f78517a6f3ed9926e667372df
name: protobuf-lite-devel
arch: x86_64
version: 3.5.0
epoch: 0
release: 15.an8
summary: Protocol Buffers LITE_RUNTIME development libraries
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: protobuf-3.5.0-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf/3.5.0/15.an8/x86_64/protobuf-lite-devel-3.5.0-15.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: ba9ad3bd0c134c44c286375f38f1cc407d24051e88f351a0668281bb5388e791
name: protobuf-lite-static
arch: x86_64
version: 3.5.0
epoch: 0
release: 15.an8
summary: Static development files for protobuf-lite
url: https://github.com/google/protobuf
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: protobuf-3.5.0-15.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/protobuf/3.5.0/15.an8/x86_64/protobuf-lite-static-3.5.0-15.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains static development libraries built with
  optimize_for = LITE_RUNTIME.

  The "optimize_for = LITE_RUNTIME" option causes the compiler to generate code
  which only depends libprotobuf-lite, which is much smaller than libprotobuf but
  lacks descriptors, reflection, and some other features.


pkgId: 2a15a61d0284bda09410ef3c35388b096a70ac7ebbaec83492643a039c92221b
name: ps_mem
arch: noarch
version: 3.6
epoch: 0
release: 9.an8
summary: Memory profiling tool
url: https://github.com/pixelb/ps_mem
rpm_license: LGPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: ps_mem-3.6-9.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/ps_mem/3.6/9.an8/noarch/ps_mem-3.6-9.an8.noarch.rpm
checksum_type: sha256
description:
  The ps_mem tool reports how much core memory is used per program
  (not per process). In detail it reports:
  sum(private RAM for program processes) + sum(Shared RAM for program processes)
  The shared RAM is problematic to calculate, and the tool automatically
  selects the most accurate method available for the running kernel.


pkgId: 72cab783634042115465a08aacd2bc5ec8802652ef42298dc8a9c9eb0b4818b9
name: psacct
arch: x86_64
version: 6.6.3
epoch: 0
release: 4.0.1.an8
summary: Utilities for monitoring process activities
url: http://www.gnu.org/software/acct/
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: psacct-6.6.3-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/psacct/6.6.3/4.0.1.an8/x86_64/psacct-6.6.3-4.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The psacct package contains several utilities for monitoring process
  activities, including ac, lastcomm, accton and sa. The ac command
  displays statistics about how long users have been logged on. The
  lastcomm command displays information about previous executed
  commands. The accton command turns process accounting on or off. The
  sa command summarizes information about previously executed
  commands.


pkgId: d9b45960f917b7b11b8ec23cff59441b9e006b76af21e519f2c49fb5c21bbc4e
name: psl
arch: x86_64
version: 0.20.2
epoch: 0
release: 6.an8
summary: Commandline utility to explore the Public Suffix List
url: https://rockdaboot.github.io/libpsl
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: libpsl-0.20.2-6.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/libpsl/0.20.2/6.an8/x86_64/psl-0.20.2-6.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains a commandline utility to explore the Public Suffix List,
  for example it checks if domains are public suffixes, checks if cookie-domain
  is acceptable for domains and so on.


pkgId: 6af00b0ae68f7e79b84424ecbf7ad0262a040104fa9e9d0557414d0fdbf4e15a
name: psl-make-dafsa
arch: x86_64
version: 0.20.2
epoch: 0
release: 6.an8
summary: Compiles the Public Suffix List into DAFSA form
url: https://rockdaboot.github.io/libpsl
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: libpsl-0.20.2-6.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/libpsl/0.20.2/6.an8/x86_64/psl-make-dafsa-0.20.2-6.an8.x86_64.rpm
checksum_type: sha256
description:
  This script produces C/C++ code or an architecture-independent binary object
  which represents a Deterministic Acyclic Finite State Automaton (DAFSA)
  from a plain text Public Suffix List.


pkgId: c630d255066ce031c2f94ec5bdc8cf17747f143d55afbc11ffad1a0f121711f0
name: psmisc
arch: x86_64
version: 23.1
epoch: 0
release: 5.0.1.an8
summary: Utilities for managing processes on your system
url: https://gitlab.com/psmisc/psmisc
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: psmisc-23.1-5.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/psmisc/23.1/5.0.1.an8/x86_64/psmisc-23.1-5.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall, fuser and pslog.  The pstree command displays
  a tree structure of all of the running processes on your system.  The
  killall command sends a specified signal (SIGTERM if nothing is specified)
  to processes identified by name.  The fuser command identifies the PIDs
  of processes that are using specified files or filesystems. The pslog
  command shows the path of log files owned by a given process.


pkgId: c8cc458458c44f3a72e336632b4e680a060c5f45d61fbf5403b646750c6a1cbb
name: pstoedit
arch: x86_64
version: 3.70
epoch: 0
release: 9.0.1.an8
summary: Translates PostScript and PDF graphics into other vector formats
url: http://www.pstoedit.net/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Productivity
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pstoedit-3.70-9.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pstoedit/3.70/9.0.1.an8/x86_64/pstoedit-3.70-9.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Pstoedit converts PostScript and PDF files to various vector graphic
  formats. The resulting files can be edited or imported into various
  drawing packages. Pstoedit comes with a large set of integrated format
  drivers


pkgId: 8a3194e4ce46d0ef7071cc3a8e9f3e906033f2a10e0bc812ab97c0b4a54092b5
name: ptscotch-mpich
arch: x86_64
version: 6.0.5
epoch: 0
release: 3.an8
summary: PT-Scotch libraries compiled against mpich
url: https://gforge.inria.fr/projects/scotch/
rpm_license: CeCILL-C
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: scotch-6.0.5-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/scotch/6.0.5/3.an8/x86_64/ptscotch-mpich-6.0.5-3.an8.x86_64.rpm
checksum_type: sha256
description:
  Scotch is a software package for graph and mesh/hypergraph partitioning and
  sparse matrix ordering. This sub-package provides parallelized scotch libraries
  compiled with mpich.


pkgId: 16d128e79da8b4a34606a92c0eb41e8cc6d76c44a85939aabac8fd51e703c988
name: ptscotch-openmpi
arch: x86_64
version: 6.0.5
epoch: 0
release: 3.an8
summary: PT-Scotch libraries compiled against openmpi
url: https://gforge.inria.fr/projects/scotch/
rpm_license: CeCILL-C
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: scotch-6.0.5-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/scotch/6.0.5/3.an8/x86_64/ptscotch-openmpi-6.0.5-3.an8.x86_64.rpm
checksum_type: sha256
description:
  Scotch is a software package for graph and mesh/hypergraph partitioning and
  sparse matrix ordering. This sub-package provides parallelized scotch libraries
  compiled with openmpi.


pkgId: 54741fc932b373e2d168832a6d1e5f05d8810660c5f7e435c317a74d8e5b7d86
name: publicsuffix-list
arch: noarch
version: 20180723
epoch: 0
release: 1.el8
summary: Cross-vendor public domain suffix database
url: https://publicsuffix.org/
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: publicsuffix-list-20180723-1.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Public Suffix List is a cross-vendor initiative to provide
  an accurate list of domain name suffixes, maintained by the hard work
  of Mozilla volunteers and by submissions from registries.
  Software using the Public Suffix List will be able to determine where
  cookies may and may not be set, protecting the user from being
  tracked across sites.

location_href:
  toplink/packages/publicsuffix-list/20180723/1.el8/noarch/publicsuffix-list-20180723-1.el8.noarch.rpm


pkgId: 3561eb1c3299f74f6eeb7823cbbc615c7a53bad9ae040f45ca8da597bb978bd8
name: publicsuffix-list-dafsa
arch: noarch
version: 20180723
epoch: 0
release: 1.el8
summary: Cross-vendor public domain suffix database in DAFSA form
url: https://publicsuffix.org/
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: publicsuffix-list-20180723-1.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Public Suffix List is a cross-vendor initiative to provide
  an accurate list of domain name suffixes, maintained by the hard work
  of Mozilla volunteers and by submissions from registries.
  Software using the Public Suffix List will be able to determine where
  cookies may and may not be set, protecting the user from being
  tracked across sites.

  This package includes a DAFSA representation of the Public Suffix List
  for runtime loading.

location_href:
  toplink/packages/publicsuffix-list/20180723/1.el8/noarch/publicsuffix-list-dafsa-20180723-1.el8.noarch.rpm


pkgId: 6d3e665039a3bcd4a4b7ae7a77d74db1a74b57d48187cd4320367ce11d069a5e
name: pulseaudio
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: Improved Linux Sound Server
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-15.0-2.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  PulseAudio is a sound server for Linux and other Unix like operating
  systems. It is intended to be an improved drop-in replacement for the
  Enlightened Sound Daemon (ESOUND).


pkgId: 82328e2ec50c8dd7f06f8bb187ec70918c22db2b385a46bf4c49cd49586b128e
name: pulseaudio-libs
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: Libraries for PulseAudio clients
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-libs-15.0-2.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains the runtime libraries for any application that wishes
  to interface with a PulseAudio sound server.


pkgId: a1cc09ac66e404cd88b26910a7e35c7bea6ebed5a4afe3663c9d15815caffc8e
name: pulseaudio-libs-devel
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: Headers and libraries for PulseAudio client development
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-libs-devel-15.0-2.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Headers and libraries for developing applications that can communicate with
  a PulseAudio sound server.


pkgId: 8472df51df8d4e1c9cfd05474f768f2e5d880a124f2738b2a404bcfb6533784f
name: pulseaudio-libs-glib2
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: GLIB 2.x bindings for PulseAudio clients
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-libs-glib2-15.0-2.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains bindings to integrate the PulseAudio client library with
  a GLIB 2.x based application.


pkgId: 00eaf4148dcf205453292fe6a6601061b8b8578cf5bdfcb2a430d6b695ef9913
name: pulseaudio-module-bluetooth
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: Bluetooth support for the PulseAudio sound server
description: Contains Bluetooth audio (A2DP/HSP/HFP) support for the PulseAudio sound server.
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-module-bluetooth-15.0-2.0.1.an8.x86_64.rpm


pkgId: 6bb6b90bdc2f303f1558b017eefc29a62f1d50a27f5c52fe0a5de45205d2e7b7
name: pulseaudio-module-gsettings
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: Gsettings support for the PulseAudio sound server
description: GSettings configuration backend for the PulseAudio sound server.
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-module-gsettings-15.0-2.0.1.an8.x86_64.rpm


pkgId: 2d82c741a734d0899954f59027225cff17fb6cd82e2efc108ee292f03f98d18f
name: pulseaudio-module-zeroconf
arch: x86_64
version: 15.0
epoch: 0
release: 2.0.1.an8
summary: Zeroconf support for the PulseAudio sound server
description: Zeroconf publishing module for the PulseAudio sound server.
url: http://www.freedesktop.org/wiki/Software/PulseAudio
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: pulseaudio-15.0-2.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/pulseaudio/15.0/2.0.1.an8/x86_64/pulseaudio-module-zeroconf-15.0-2.0.1.an8.x86_64.rpm


pkgId: 75e4ee2699d485b2fe2790c2c9d2fb16a7d71f9fc39a85cd63e385889732d9dd
name: purple-sipe
arch: x86_64
version: 1.23.2
epoch: 0
release: 1.el8
summary: Libpurple protocol plugin to connect to MS Office Communicator
url: http://sipe.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Applications/Communications
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pidgin-sipe-1.23.2-1.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pidgin-sipe/1.23.2/1.el8/x86_64/purple-sipe-1.23.2-1.el8.x86_64.rpm
checksum_type: sha256
description:
  A third-party plugin for the Pidgin multi-protocol instant messenger.
  It implements the extended version of SIP/SIMPLE used by various products:

      * Skype for Business
      * Microsoft Office 365
      * Microsoft Business Productivity Online Suite (BPOS)
      * Microsoft Lync Server
      * Microsoft Office Communications Server (OCS 2007/2007 R2)
      * Microsoft Live Communications Server (LCS 2003/2005)

  This package provides the protocol plugin for libpurple clients.


pkgId: 19b43c33ee2d59360d1f5f4712bb54e4ba66a33b782face22a2eb2b6b4f706b5
name: py3c-devel
arch: x86_64
version: 1.2
epoch: 0
release: 4.an8
summary: Header files for py3c
url: http://py3c.readthedocs.io/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: py3c-1.2-4.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/py3c/1.2/4.an8/x86_64/py3c-devel-1.2-4.an8.x86_64.rpm
checksum_type: sha256
description:
  py3c-devel is only required for building software that uses py3c.
  Because py3c is a header-only library, there is no matching run-time package.


pkgId: 78ac56a5e09b344f7e62da953c8e6e97e04dcb3549fce7c5ed86453f5e864cd3
name: pykickstart
arch: noarch
version: 3.16.15
epoch: 0
release: 1.an8
summary: Python utilities for manipulating kickstart files.
url: https://github.com/pykickstart/pykickstart
rpm_license: GPLv2 and MIT
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pykickstart-3.16.15-1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pykickstart/3.16.15/1.an8/noarch/pykickstart-3.16.15-1.an8.noarch.rpm
checksum_type: sha256
description:
  Python utilities for manipulating kickstart files.  The Python 2 and 3 libraries
  can be found in the packages python-kickstart and python3-kickstart
  respectively.


pkgId: 6486c0e25bca7efe5ad6b1852a806ffd24841cbd1a2d59e30e79433ed2d075e7
name: pyproject-rpm-macros
arch: noarch
version: 1.6.2
epoch: 0
release: 1.an8
summary: RPM macros for PEP 517 Python packages
url: https://src.fedoraproject.org/rpms/pyproject-rpm-macros
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pyproject-rpm-macros-1.6.2-1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  These macros allow projects that follow the Python packaging specifications
  to be packaged as RPMs.

  They work for:

  * traditional Setuptools-based projects that use the setup.py file,
  * newer Setuptools-based projects that have a setup.cfg file,
  * general Python projects that use the PEP 517 pyproject.toml file
    (which allows using any build system, such as setuptools, flit or poetry).

  These macros replace %py3_build and %py3_install,
  which only work with setup.py.

location_href:
  toplink/packages/pyproject-rpm-macros/1.6.2/1.an8/noarch/pyproject-rpm-macros-1.6.2-1.an8.noarch.rpm


pkgId: 2abb74ad7c0741da5938d659bd8682c29cc2a7d14a674bfc279effc0981624ee
name: pyproject-srpm-macros
arch: noarch
version: 1.6.2
epoch: 0
release: 1.an8
summary: Minimal implementation of %pyproject_buildrequires
url: https://src.fedoraproject.org/rpms/pyproject-rpm-macros
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pyproject-rpm-macros-1.6.2-1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains a minimal implementation of %pyproject_buildrequires.
  When used in %generate_buildrequires, it will generate BuildRequires
  for pyproject-rpm-macros. When both packages are installed, the full version
  takes precedence.

location_href:
  toplink/packages/pyproject-rpm-macros/1.6.2/1.an8/noarch/pyproject-srpm-macros-1.6.2-1.an8.noarch.rpm


pkgId: 39172ee88779e8f3a5ffd080fa173fdd7ab862f340f1e6a5198219dbe3cbad06
name: python-ldb-devel-common
arch: x86_64
version: 2.6.1
epoch: 0
release: 1.0.1.an8
summary: Common development files for the Python bindings for the LDB library
url: http://ldb.samba.org/
rpm_license: LGPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: libldb-2.6.1-1.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/libldb/2.6.1/1.0.1.an8/x86_64/python-ldb-devel-common-2.6.1-1.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  Development files for the Python bindings for the LDB library.
  This package includes files that aren't specific to a Python version.


pkgId: 06d4af809062ab7282eea9fee16143c0ee0896393fd3df2efeb2481de0e0e32a
name: python-mako-doc
arch: noarch
version: 1.0.6
epoch: 0
release: 14.an8
summary: Documentation for the Mako template library for Python
url: http://www.makotemplates.org/
rpm_license: (MIT and Python) and (BSD or GPLv2)
rpm_vendor: OpenAnolis Community
rpm_group: Documentation
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: python-mako-1.0.6-14.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-mako/1.0.6/14.an8/noarch/python-mako-doc-1.0.6-14.an8.noarch.rpm
checksum_type: sha256
description:
  Mako is a template library written in Python. It provides a familiar, non-XML
  syntax which compiles into Python modules for maximum performance. Mako's
  syntax and API borrows from the best ideas of many others, including Django
  templates, Cheetah, Myghty, and Genshi. Conceptually, Mako is an embedded
  Python (i.e. Python Server Page) language, which refines the familiar ideas of
  componentized layout and inheritance to produce one of the most straightforward
  and flexible models available, while also maintaining close ties to Python
  calling and scoping semantics.

  This package contains documentation in text and HTML formats.


pkgId: dd6ecfe8fc8e85c38fe5fc8220305dafbb1ce63c16a3a68fc0500da744de7c98
name: python-nose-docs
arch: noarch
version: 1.3.7
epoch: 0
release: 31.module+an8.7.0+10991+5846f372
summary: Nose Documentation
description: Documentation for Nose.
url: https://nose.readthedocs.org/en/latest/
rpm_license: LGPLv2+ and Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-nose-1.3.7-31.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-nose/1.3.7/31.module+an8.7.0+10991+5846f372/noarch/python-nose-docs-1.3.7-31.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: 4225328f46251f1aa5a73f0b51089f547aba9a1da4391fcf3e7b525e1ad8ab24
name: python-psycopg2-doc
arch: x86_64
version: 2.7.5
epoch: 0
release: 7.0.1.an8
summary: Documentation for psycopg python PostgreSQL database adapter
description:
  Documentation and example files for the psycopg python PostgreSQL
  database adapter.

url: http://www.psycopg.org/psycopg/
rpm_license: LGPLv3+ with exceptions
rpm_vendor: OpenAnolis Community
rpm_group: Documentation
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-psycopg2-2.7.5-7.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-psycopg2/2.7.5/7.0.1.an8/x86_64/python-psycopg2-doc-2.7.5-7.0.1.an8.x86_64.rpm


pkgId: 9962a44b767ca590e96d0dee18cf472f7bc3159ea1a0739ccacc94ff95c19955
name: python-pymongo-doc
arch: noarch
version: 3.7.0
epoch: 0
release: 1.0.1.module+an8.7.0+10991+5846f372
summary: Documentation for python-pymongo
description: Documentation for python-pymongo.
url: http://api.mongodb.org/python
rpm_license: ASL 2.0 and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: python-pymongo-3.7.0-1.0.1.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-pymongo/3.7.0/1.0.1.module+an8.7.0+10991+5846f372/noarch/python-pymongo-doc-3.7.0-1.0.1.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: 8478b788e970fae00fecb45769a8a9f5b25611c7db10dc8e5d12d59c7ac42681
name: python-reportlab-doc
arch: noarch
version: 3.4.0
epoch: 0
release: 8.0.1.an8.1
summary: Documentation for python-reportlab
description: Contains the documentation for ReportLab.
url: http://www.reportlab.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python-reportlab-3.4.0-8.0.1.an8.1.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-reportlab/3.4.0/8.0.1.an8.1/noarch/python-reportlab-doc-3.4.0-8.0.1.an8.1.noarch.rpm


pkgId: 8827a7918ef700956a9c1852e83ef4c8e074f79e376bdc9da919687124d7faa4
name: python-rpm-macros
arch: noarch
version: 3
epoch: 0
release: 45.an8
summary: The unversioned Python RPM macros
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: python-rpm-macros-3-45.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-rpm-macros/3/45.an8/noarch/python-rpm-macros-3-45.an8.noarch.rpm
checksum_type: sha256
description:
  This package contains the unversioned Python RPM macros, that most
  implementations should rely on.

  You should not need to install this package manually as the various
  python?-devel packages require it. So install a python-devel package instead.


pkgId: 4c8904ba8ca74ca336e70241e2687c3b7a571abf0b54bfe9a56a4b859f50b33e
name: python-semantic_version-doc
arch: noarch
version: 2.6.0
epoch: 0
release: 5.el8
summary: Documentation for python-semantic_version
description: Documentation for python-semantic_version.
url: https://github.com/rbarrois/python-semanticversion
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-semantic_version-2.6.0-5.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-semantic_version/2.6.0/5.el8/noarch/python-semantic_version-doc-2.6.0-5.el8.noarch.rpm


pkgId: 390af12ddcc96b7d4b82510bb779505ec9b5682ec7a98b267ef1451138fd1ef8
name: python-sphinx-doc
arch: noarch
version: 1.7.6
epoch: 1
release: 3.an8
summary: Documentation for python-sphinx
url: http://sphinx-doc.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Documentation
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-sphinx-1.7.6-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-sphinx/1.7.6/3.an8/noarch/python-sphinx-doc-1.7.6-3.an8.noarch.rpm
checksum_type: sha256
description:
  Sphinx is a tool that makes it easy to create intelligent and
  beautiful documentation for Python projects (or other documents
  consisting of multiple reStructuredText sources), written by Georg
  Brandl. It was originally created to translate the new Python
  documentation, but has now been cleaned up in the hope that it will be
  useful to many other projects.

  This package contains documentation in reST and HTML formats.


pkgId: e4bcd7e715135ef335418a373738c2b97acd0eb64aa66d3d4fb0b297de7872f5
name: python-sphinx-latex
arch: noarch
version: 1.7.6
epoch: 1
release: 3.an8
summary: LaTeX builder dependencies for python-sphinx
url: http://sphinx-doc.org/
rpm_license: BSD and Public Domain and Python and (MIT or GPLv2)
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-sphinx-1.7.6-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-sphinx/1.7.6/3.an8/noarch/python-sphinx-latex-1.7.6-3.an8.noarch.rpm
checksum_type: sha256
description:
  Sphinx is a tool that makes it easy to create intelligent and
  beautiful documentation for Python projects (or other documents
  consisting of multiple reStructuredText sources), written by Georg
  Brandl. It was originally created to translate the new Python
  documentation, but has now been cleaned up in the hope that it will be
  useful to many other projects.

  This package pulls in the TeX dependencies needed by Sphinx's LaTeX
  builder.


pkgId: 6ea1fa35ceb689d58a1ccaf3cc33524991ce965e8d4d4aeb2fe7da7cdcad92c9
name: python-sphinx-locale
arch: noarch
version: 1.7.6
epoch: 1
release: 3.an8
summary: Locale files for python-sphinx
url: http://sphinx-doc.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Development/Tools
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-sphinx-1.7.6-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-sphinx/1.7.6/3.an8/noarch/python-sphinx-locale-1.7.6-3.an8.noarch.rpm
checksum_type: sha256
description:
  Sphinx is a tool that makes it easy to create intelligent and
  beautiful documentation for Python projects (or other documents
  consisting of multiple reStructuredText sources), written by Georg
  Brandl. It was originally created to translate the new Python
  documentation, but has now been cleaned up in the hope that it will be
  useful to many other projects.

  This package contains locale files for Sphinx


pkgId: 39265e190e0a623c14fe7d522c85d5fafb7609d04be5467e05fe86e3491400d8
name: python-sqlalchemy-doc
arch: noarch
version: 1.3.2
epoch: 0
release: 2.module+an8.7.0+10991+5846f372
summary: Documentation for SQLAlchemy
description: Documentation for SQLAlchemy
url: http://www.sqlalchemy.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: python-sqlalchemy-1.3.2-2.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-sqlalchemy/1.3.2/2.module+an8.7.0+10991+5846f372/noarch/python-sqlalchemy-doc-1.3.2-2.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: 38a33059d9a947020f7d87bedb9d3e4c80cc25bc7efd537d7925abe99dd5c227
name: python-virtualenv-doc
arch: noarch
version: 15.1.0
epoch: 0
release: 22.module+an8.8.0+11079+1f0a86ec
summary: Documentation for python virtualenv
description: Documentation for python virtualenv.
url: http://pypi.python.org/pypi/virtualenv
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: python-virtualenv-15.1.0-22.module+an8.8.0+11079+1f0a86ec.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-virtualenv/15.1.0/22.module+an8.8.0+11079+1f0a86ec/noarch/python-virtualenv-doc-15.1.0-22.module+an8.8.0+11079+1f0a86ec.noarch.rpm


pkgId: 8cff5e86cdf330a959e0c4fb179fe13f123895ad61390a26cd1822374f6dd409
name: python-webencodings-doc
arch: noarch
version: 0.5.1
epoch: 0
release: 6.el8
summary: Documentation for python-webencodings
description: Documentation for python-webencodings.
url: https://github.com/gsnedders/python-webencodings
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-webencodings-0.5.1-6.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-webencodings/0.5.1/6.el8/noarch/python-webencodings-doc-0.5.1-6.el8.noarch.rpm


pkgId: 0c49f2ffba837275e28e68616fc254c12bf6e3ea3446e31d1e1ea7e9dc276637
name: python2
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: An interpreted, interactive, object-oriented programming language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Python 2 is an old version of the language that is incompatible with the 3.x
  line of releases. The language is mostly the same, but many details, especially
  how built-in objects like dictionaries and strings work, have changed
  considerably, and a lot of deprecated features have finally been removed in the
  3.x line.

  Note that documentation for Python 2 is provided in the python2-docs
  package.

  This package provides the "python2" executable; most of the actual
  implementation is within the "python2-libs" package.
  For the unversioned "python" executable, see manual page "unversioned-python".

location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: 2731e40540954dc161e78becc623984f4f2da8fc077690b55d05b936f187103b
name: python2-backports
arch: x86_64
version: 1.0
epoch: 0
release: 16.module+an8.7.0+10860+d772453f
summary: Namespace for backported Python features
url: https://pypi.python.org/pypi/backports
rpm_license: Public Domain
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-backports-1.0-16.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The backports namespace is a namespace reserved for features backported from
  the Python standard library to older versions of Python 2.

  Packages that exist in the backports namespace in Fedora should not provide
  their own backports/__init__.py, but instead require this package.

  Backports to earlier versions of Python 3, if they exist, do not need this
  package because of changes made in Python 3.3 in PEP 420
  (http://www.python.org/dev/peps/pep-0420/).

location_href:
  toplink/packages/python-backports/1.0/16.module+an8.7.0+10860+d772453f/x86_64/python2-backports-1.0-16.module+an8.7.0+10860+d772453f.x86_64.rpm


pkgId: 01c0e061b41b16d25eb9ab6b7bd8b1d2e44a4c2747b0da952b04a45aeb75e24b
name: python2-backports-ssl_match_hostname
arch: noarch
version: 3.5.0.1
epoch: 0
release: 12.module+an8.7.0+10860+d772453f
summary: The ssl.match_hostname() function from Python 3
url: https://bitbucket.org/brandon/backports.ssl_match_hostname
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-backports-ssl_match_hostname-3.5.0.1-12.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Secure Sockets layer is only actually secure if you check the hostname in
  the certificate returned by the server to which you are connecting, and verify
  that it matches to hostname that you are trying to reach.

  But the matching logic, defined in RFC2818, can be a bit tricky to implement on
  your own. So the ssl package in the Standard Library of Python 3.2 now includes
  a match_hostname() function for performing this check instead of requiring
  every application to implement the check separately.

  This backport brings match_hostname() to users of earlier versions of Python.
  The actual code is only slightly modified from Python 3.5.

location_href:
  toplink/packages/python-backports-ssl_match_hostname/3.5.0.1/12.module+an8.7.0+10860+d772453f/noarch/python2-backports-ssl_match_hostname-3.5.0.1-12.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: bc26abd7a967c1eb3868e52cdf6af79bbbf1e008a17bb400f4210f1ce2bef81c
name: python2-debug
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: Debug version of the Python 2 runtime
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  python2-debug provides a version of the Python 2 runtime with numerous debugging
  features enabled, aimed at advanced Python users, such as developers of Python
  extension modules.

  This version uses more memory and will be slower than the regular Python 2 build,
  but is useful for tracking down reference-counting issues, and other bugs.

  The bytecodes are unchanged, so that .pyc files are compatible between the two
  version of Python 2, but the debugging features mean that C/C++ extension modules
  are ABI-incompatible with those built for the standard runtime.

  It shares installation directories with the standard Python 2 runtime, so that
  .py and .pyc files can be shared.  All compiled extension modules gain a "_d"
  suffix ("foo_d.so" rather than "foo.so") so that each Python 2 implementation can
  load its own extensions.

location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-debug-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: 4dfa37614ae6194148e9d18c668f93aef69aa649fc3cfb1539a597dfd5fab076
name: python2-devel
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: Libraries and header files needed for Python 2 development
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains libraries and header files used to build applications
  with and native libraries for Python 2

location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-devel-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: 1027db7fb24f9f6c06cbe234b25303900fc576ca92bee6e712f79813ad8b3fbe
name: python2-funcsigs
arch: noarch
version: 1.0.2
epoch: 0
release: 13.module+an8.7.0+10860+d772453f
summary: Python function signatures from PEP362 for Python 2.6, 2.7 and 3.2+
url: https://github.com/testing-cabal/funcsigs?
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-funcsigs-1.0.2-13.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  funcsigs is a backport of the PEP 362 function signature features from
  Python 3.3's inspect module. The backport is compatible with Python 2.6, 2.7
  as well as 3.2 and up.

location_href:
  toplink/packages/python-funcsigs/1.0.2/13.module+an8.7.0+10860+d772453f/noarch/python2-funcsigs-1.0.2-13.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 3192dbe7c57d7f80ec2a3776568eaed69954fef889b83c8761a7aab4ac0e58b1
name: python2-ipaddress
arch: noarch
version: 1.0.18
epoch: 0
release: 6.module+an8.7.0+10860+d772453f
summary: Port of the python 3.3+ ipaddress module to 2.6+
url: https://pypi.python.org/pypi/ipaddress/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: python-ipaddress-1.0.18-6.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  ipaddress provides the capabilities to create, manipulate and operate
  on IPv4 and IPv6 addresses and networks.

  The functions and classes in this module make it straightforward to
  handle various tasks related to IP addresses, including checking
  whether or not two hosts are on the same subnet, iterating over all
  hosts in a particular subnet, checking whether or not a string
  represents a valid IP address or network definition, and so on.

location_href:
  toplink/packages/python-ipaddress/1.0.18/6.module+an8.7.0+10860+d772453f/noarch/python2-ipaddress-1.0.18-6.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 3edc7f062ee9d0a0ada8d6af5fc74d53edeb49f3517ec27c77540c5a8f499c52
name: python2-iso8601
arch: noarch
version: 0.1.11
epoch: 0
release: 12.an8
summary: Simple module to parse ISO 8601 dates
url: http://pypi.python.org/pypi/iso8601/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-iso8601-0.1.11-12.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-iso8601/0.1.11/12.an8/noarch/python2-iso8601-0.1.11-12.an8.noarch.rpm
checksum_type: sha256
description:
  This module parses the most common forms of ISO 8601 date strings
  (e.g. 2007-01-14T20:34:22+00:00) into datetime objects.


pkgId: d2e034e59539215fbb9d2ab4f645900c1cad17b5a36dfc21e503f3bdf48dc365
name: python2-libs
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: Runtime libraries for Python 2
description: This package contains files used to embed Python 2 into applications.
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-libs-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: 542b34a3718e40169552aedcc6dd073ea9b3291717e09484f85086c175b6267a
name: python2-pip
arch: noarch
version: 9.0.3
epoch: 0
release: 19.0.1.module+an8.7.0+10860+d772453f
summary: A tool for installing and managing Python 2 packages
url: http://www.pip-installer.org
rpm_license: MIT and Python and ASL 2.0 and BSD and ISC and LGPLv2 and MPLv2.0 and (ASL 2.0 or BSD)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python2-pip-9.0.3-19.0.1.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  pip is a package management system used to install and manage software packages
  written in Python. Many packages can be found in the Python Package Index
  (PyPI). pip is a recursive acronym that can stand for either "Pip Installs
  Packages" or "Pip Installs Python".

location_href:
  toplink/packages/python2-pip/9.0.3/19.0.1.module+an8.7.0+10860+d772453f/noarch/python2-pip-9.0.3-19.0.1.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 1fab3e0bfca264540899e972ecf6e5f0977d06a6468f20da056f87694d8fe871
name: python2-pip-wheel
arch: noarch
version: 9.0.3
epoch: 0
release: 19.0.1.module+an8.7.0+10860+d772453f
summary: The pip wheel
description: A Python wheel of pip to use with venv.
url: http://www.pip-installer.org
rpm_license: MIT and Python and ASL 2.0 and BSD and ISC and LGPLv2 and MPLv2.0 and (ASL 2.0 or BSD)
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python2-pip-9.0.3-19.0.1.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python2-pip/9.0.3/19.0.1.module+an8.7.0+10860+d772453f/noarch/python2-pip-wheel-9.0.3-19.0.1.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 4d22f1799fd6cc494b7139655bfe48de5d3a03c48e2d07f18d3b515d9aeddaac
name: python2-pyqt4-sip
arch: x86_64
version: 4.19.25
epoch: 0
release: 1.an8
summary: Files needed to generate Python bindings for any C++ class library
url: https://riverbankcomputing.com/software/sip/intro
rpm_license: GPLv2 or GPLv3 and (GPLv3+ with exceptions)
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: sip-4.19.25-1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/sip/4.19.25/1.an8/x86_64/python2-pyqt4-sip-4.19.25-1.an8.x86_64.rpm
checksum_type: sha256
description:
  SIP is a tool for generating bindings for C++ classes so that they can be
  accessed as normal Python classes. SIP takes many of its ideas from SWIG but,
  because it is specifically designed for C++ and Python, is able to generate
  tighter bindings. SIP is so called because it is a small SWIG.

  SIP was originally designed to generate Python bindings for KDE and so has
  explicit support for the signal slot mechanism used by the Qt/KDE class
  libraries. However, SIP can be used to generate Python bindings for any C++
  class library.


pkgId: 7ed64b3a07dc2cb6245bf8c51f7353ab21b1f176389439a2d0242717a60348b2
name: python2-pytest-mock
arch: noarch
version: 1.9.0
epoch: 0
release: 4.module+an8.7.0+10860+d772453f
summary: Thin-wrapper around the mock package for easier use with py.test
url: https://pypi.python.org/pypi/pytest-mock
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-pytest-mock-1.9.0-4.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This plugin installs a mocker fixture which is a thin-wrapper around the
  patching API provided by the mock package, but with the benefit of not having
  to worry about undoing patches at the end of a test.

location_href:
  toplink/packages/python-pytest-mock/1.9.0/4.module+an8.7.0+10860+d772453f/noarch/python2-pytest-mock-1.9.0-4.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 0835f15ff67d96efa908da31ae44620239f32feb9b1c8e03bd004e8bee810a99
name: python2-rpm-macros
arch: noarch
version: 3
epoch: 0
release: 38.module+an8.7.0+10860+d772453f
summary: RPM macros for building Python 2 packages
description: RPM macros for building Python 2 packages.
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python2-rpm-macros-3-38.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python2-rpm-macros/3/38.module+an8.7.0+10860+d772453f/noarch/python2-rpm-macros-3-38.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 9b02951fc248f5de25c73e858c05237fda6102ce53cea5c88b7723a5994ad5bd
name: python2-setuptools
arch: noarch
version: 39.0.1
epoch: 0
release: 13.module+an8.7.0+10860+d772453f
summary: Easily build and distribute Python packages
url: https://pypi.python.org/pypi/setuptools
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python2-setuptools-39.0.1-13.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Setuptools is a collection of enhancements to the Python distutils that allow
  you to more easily build and distribute Python packages, especially ones that
  have dependencies on other packages.

  This package also contains the runtime components of setuptools, necessary to
  execute the software that requires pkg_resources.py.

location_href:
  toplink/packages/python2-setuptools/39.0.1/13.module+an8.7.0+10860+d772453f/noarch/python2-setuptools-39.0.1-13.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: b9d8385ede9b974d95d0489ce443f6c51c2e31996d7d5b7c27e677ef0972edfc
name: python2-setuptools-wheel
arch: noarch
version: 39.0.1
epoch: 0
release: 13.module+an8.7.0+10860+d772453f
summary: The setuptools wheel
description: A Python wheel of setuptools to use with venv.
url: https://pypi.python.org/pypi/setuptools
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Applications/System
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python2-setuptools-39.0.1-13.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python2-setuptools/39.0.1/13.module+an8.7.0+10860+d772453f/noarch/python2-setuptools-wheel-39.0.1-13.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: a0879bee5d2f14594af327423da29494bf25b12fe15ab7b4bc93f26750fd945a
name: python2-six
arch: noarch
version: 1.11.0
epoch: 0
release: 6.module+an8.7.0+10860+d772453f
summary: Python 2 and 3 compatibility utilities
description:
  python2-six provides simple utilities for wrapping over differences between
  Python 2 and Python 3.

url: https://pypi.python.org/pypi/six
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python2-six-1.11.0-6.module+an8.7.0+10860+d772453f.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python2-six/1.11.0/6.module+an8.7.0+10860+d772453f/noarch/python2-six-1.11.0-6.module+an8.7.0+10860+d772453f.noarch.rpm


pkgId: 0138e572d979d24513159a1f4963933fc7c26b522e3311228a2e15ecaff6f9a4
name: python2-test
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: The test modules from the main python2 package
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The test modules from the main python2 package: python2
  These have been removed to save space, as they are never or almost
  never used in production.

  You might want to install the python2-test package if you're developing python 2
  code that uses more than just unittest and/or test.support.

location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-test-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: d9bf6f5beab34899fc5568bcf8de643912ed6f1baa2b3e9f5b7c460541be5975
name: python2-tkinter
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: A graphical user interface for the Python 2 scripting language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Tkinter (Tk interface) program is an graphical user interface for
  the Python 2 scripting language.

  You should install the python2tkinter package if you'd like to use a graphical
  user interface for Python 2 programming.

location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-tkinter-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: 33c49807f619485c3cd8a0954e8ac1c6a9eefed9adef90b871262604707e0e77
name: python2-tools
arch: x86_64
version: 2.7.18
epoch: 0
release: 13.module+an8.8.0+11057+0674a702
summary: A collection of development tools included with Python 2
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Development/Tools
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python2-2.7.18-13.module+an8.8.0+11057+0674a702.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package includes several tools to help with the development of Python 2
  programs, including IDLE (an IDE with editing and debugging facilities), a
  color editor (pynche), and a python gettext program (pygettext.py).

location_href:
  toplink/packages/python2/2.7.18/13.module+an8.8.0+11057+0674a702/x86_64/python2-tools-2.7.18-13.module+an8.8.0+11057+0674a702.x86_64.rpm


pkgId: fdc41a99a72139d2a32129382b6d702bbd6db51b0e16e9c27e8ff5b38427d8b5
name: python3-Cython
arch: x86_64
version: 0.28.1
epoch: 0
release: 3.0.1.an8
summary: Language for writing Python extension modules
url: http://www.cython.org
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: Cython-0.28.1-3.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/Cython/0.28.1/3.0.1.an8/x86_64/python3-Cython-0.28.1-3.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This is a development version of Pyrex, a language
  for writing Python extension modules.

  Python 3 version.


pkgId: ec4182f1b2e606aceeb43a200e30f49e24fcf373bc4a4a8e7b82df5c36503bd0
name: python3-PyMySQL
arch: noarch
version: 0.10.1
epoch: 0
release: 2.module+an8.7.0+10991+5846f372
summary: Pure-Python MySQL client library
url: https://pypi.python.org/pypi/PyMySQL/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-PyMySQL-0.10.1-2.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains a pure-Python MySQL client library. The goal of PyMySQL is
  to be a drop-in replacement for MySQLdb and work on CPython, PyPy, IronPython
  and Jython.

location_href:
  toplink/packages/python-PyMySQL/0.10.1/2.module+an8.7.0+10991+5846f372/noarch/python3-PyMySQL-0.10.1-2.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: c5730c05dc3658ae0ae534ebd3ab824a394f24c23001e23176c45bdf3ed43354
name: python3-abrt-addon
arch: x86_64
version: 2.10.9
epoch: 0
release: 24.0.1.an8
summary: abrt's addon for catching and analyzing Python 3 exceptions
url: https://abrt.readthedocs.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: abrt-2.10.9-24.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/abrt/2.10.9/24.0.1.an8/x86_64/python3-abrt-addon-2.10.9-24.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains python 3 hook and python analyzer plugin for handling
  uncaught exception in python 3 programs.


pkgId: 1183023a010364f59d6670c442525eee1e1303fc5889f544b897285493ab0f49
name: python3-abrt-container-addon
arch: x86_64
version: 2.10.9
epoch: 0
release: 24.0.1.an8
summary: abrt's container addon for catching Python 3 exceptions
url: https://abrt.readthedocs.org/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: abrt-2.10.9-24.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains python 3 hook and handling uncaught exception in python 3
  programs in container.

location_href:
  toplink/packages/abrt/2.10.9/24.0.1.an8/x86_64/python3-abrt-container-addon-2.10.9-24.0.1.an8.x86_64.rpm


pkgId: 7d43ac807c5d73ab153eb60680a8ce3623f38aad7d2a03c39cab19a650484fa5
name: python3-argcomplete
arch: noarch
version: 1.9.3
epoch: 0
release: 6.el8
summary: Bash tab completion for argparse
url: https://github.com/kislyuk/argcomplete
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-argcomplete-1.9.3-6.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-argcomplete/1.9.3/6.el8/noarch/python3-argcomplete-1.9.3-6.el8.noarch.rpm
checksum_type: sha256
description:
  Argcomplete provides easy, extensible command line tab completion of
  arguments for your Python script.

  It makes two assumptions:

   * You are using bash as your shell
   * You are using argparse to manage your command line arguments/options

  Argcomplete is particularly useful if your program has lots of
  options or subparsers, and if your program can dynamically suggest
  completions for your argument/option values (for example, if the user
  is browsing resources over the network).

  Python 3 version.


pkgId: 2ddb883af60dc7ba9e78917c50d635776327942a11736b2eb3304599df1c3db8
name: python3-argh
arch: noarch
version: 0.26.1
epoch: 0
release: 8.el8
summary: Unobtrusive argparse wrapper with natural syntax
url: https://pypi.python.org/pypi/argh
rpm_license: LGPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-argh-0.26.1-8.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-argh/0.26.1/8.el8/noarch/python3-argh-0.26.1-8.el8.noarch.rpm
checksum_type: sha256
description:
  Building a command-line interface?  Found yourself uttering “argh!”
  while struggling with the API of argparse?  Don’t want to lose its
  power but don’t need the complexity?

  python-argh provides a wrapper for argparse.  Argparse is a very powerful
  tool;  python-argh just makes it easy to use.


pkgId: 6afcb35cabb9129a8d84c5d9c735272ef46ec4ce47482c89f587b6b7387d7f61
name: python3-argparse-manpage
arch: noarch
version: 1.5
epoch: 0
release: 1.el8
summary: Build manual page from Python 3 ArgumentParser object
url: https://github.com/praiskup/argparse-manpage
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-a64-19.iad2.fedoraproject.org
rpm_sourcerpm: argparse-manpage-1.5-1.el8.src.rpm
rpm_packager: Fedora Project
location_href: epel/python3-argparse-manpage-1.5-1.el8.noarch.rpm
location_base: http://build.openanolis.cn/kojifiles/repos/anolis-external/8/x86_64
checksum_type: sha256
description:
  Generate manual page an automatic way from ArgumentParser object, so the
  manpage 1:1 corresponds to the automatically generated --help output.  The
  manpage generator needs to known the location of the object, user can
  specify that by (a) the module name or corresponding python filename and
  (b) the object name or the function name which returns the object.
  There is a limited support for (deprecated) optparse objects, too.


pkgId: 1b80d8fe29c14f26a8cf4590fa47483d084ac2c6e944f26df5ac0cf305cc4f27
name: python3-asn1crypto
arch: noarch
version: 0.24.0
epoch: 0
release: 3.el8
summary: Fast Python ASN.1 parser and serializer
url: https://github.com/wbond/asn1crypto
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-asn1crypto-0.24.0-3.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-asn1crypto/0.24.0/3.el8/noarch/python3-asn1crypto-0.24.0-3.el8.noarch.rpm
checksum_type: sha256
description:
  Fast ASN.1 parser and serializer with definitions for private keys,
  public keys, certificates, CRL, OCSP, CMS, PKCS#3, PKCS#7, PKCS#8,
  PKCS#12, PKCS#5, X.509 and TSP.


pkgId: a24eea66bdb88cdc179e431d387b2d9365f716f0bd05d5ea8d278d9478b696f5
name: python3-attrs
arch: noarch
version: 17.4.0
epoch: 0
release: 6.el8
summary: Python attributes without boilerplate
url: http://www.attrs.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-attrs-17.4.0-6.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-attrs/17.4.0/6.el8/noarch/python3-attrs-17.4.0-6.el8.noarch.rpm
checksum_type: sha256
description:
  attrs is an MIT-licensed Python package with class decorators that
  ease the chores of implementing the most common attribute-related
  object protocols.


pkgId: 92b4515cca4a50162bf3f47c08d68011d9f9b4fabb575c3bc7b8d5d4d9c6a60c
name: python3-audit
arch: x86_64
version: 3.0.7
epoch: 0
release: 4.0.1.an8
summary: Python3 bindings for libaudit
url: http://people.redhat.com/sgrubb/audit/
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: audit-3.0.7-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/audit/3.0.7/4.0.1.an8/x86_64/python3-audit-3.0.7-4.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The python3-audit package contains the bindings so that libaudit
  and libauparse can be used by python3.


pkgId: e0a8c83709a006f0070682475eacefc20549547563578527ab29a6563836a148
name: python3-bind
arch: noarch
version: 9.11.36
epoch: 32
release: 8.an8.2
summary: A module allowing rndc commands to be sent from Python programs
url: https://www.isc.org/downloads/bind/
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: bind-9.11.36-8.an8.2.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/bind/9.11.36/8.an8.2/noarch/python3-bind-9.11.36-8.an8.2.noarch.rpm
checksum_type: sha256
description:
  This package provides a module which allows commands to be sent to rndc directly from Python programs.


pkgId: 104903efed96507372b86036ec6953008ce6da61e969d6341a1be38fed6970b1
name: python3-blockdev
arch: x86_64
version: 2.28
epoch: 0
release: 2.an8
summary: Python3 gobject-introspection bindings for libblockdev
url: https://github.com/storaged-project/libblockdev
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: libblockdev-2.28-2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/libblockdev/2.28/2.an8/x86_64/python3-blockdev-2.28-2.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains enhancements to the gobject-introspection bindings for
  libblockdev in Python3.


pkgId: 6d72b78a895e19f0b2f7708ba06a58fb3b92c5185a79e988e0cc8563d40d3c5b
name: python3-boom
arch: noarch
version: 1.3
epoch: 0
release: 2.0.2.an8
summary: A set of libraries and tools for managing boot loader entries
url: https://github.com/snapshotmanager/boom
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: boom-boot-1.3-2.0.2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/boom-boot/1.3/2.0.2.an8/noarch/python3-boom-1.3-2.0.2.an8.noarch.rpm
checksum_type: sha256
description:
  Boom is a boot manager for Linux systems using boot loaders that support
  the BootLoader Specification for boot entry configuration.

  Boom requires a BLS compatible boot loader to function: either the
  systemd-boot project, or Grub2 with the BLS patch.

  This package provides python3 boom module.


pkgId: 6b9f24650db0f7503566a044f597736451c8ea51461346cd06a9f398e82505af
name: python3-boto3
arch: noarch
version: 1.6.1
epoch: 0
release: 2.an8
summary: The AWS SDK for Python
url: https://github.com/boto/boto3
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-boto3-1.6.1-2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-boto3/1.6.1/2.an8/noarch/python3-boto3-1.6.1-2.an8.noarch.rpm
checksum_type: sha256
description:
  Boto3 is the Amazon Web Services (AWS) Software Development
  Kit (SDK) for Python, which allows Python developers to
  write software that makes use of services like Amazon S3
  and Amazon EC2.


pkgId: 0bf8ed50be9910fb6298d8ec9b3b1587b0648bc7a6f1c15d60ea3deac11a2253
name: python3-botocore
arch: noarch
version: 1.9.1
epoch: 0
release: 2.an8
summary: Low-level, data-driven core of boto 3
url: https://github.com/boto/botocore
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-botocore-1.9.1-2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-botocore/1.9.1/2.an8/noarch/python3-botocore-1.9.1-2.an8.noarch.rpm
checksum_type: sha256
description:
  A low-level interface to a growing number of Amazon Web Services. The
  botocore package is the foundation for the AWS CLI as well as boto3.


pkgId: e16c6549e41d4592607c52c46dae8ff5510f462beabda48feb4e8f2d5e3239ad
name: python3-bottle
arch: noarch
version: 0.12.18
epoch: 0
release: 5.an8
summary: Fast and simple WSGI-framework for small web-applications
url: http://bottlepy.org
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-bottle-0.12.18-5.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-bottle/0.12.18/5.an8/noarch/python3-bottle-0.12.18-5.an8.noarch.rpm
checksum_type: sha256
description:
  Bottle is a fast and simple micro-framework for small web-applications.
  It offers request dispatching (Routes) with URL parameter support, Templates,
  a built-in HTTP Server and adapters for many third party WSGI/HTTP-server and
  template engines. All in a single file and with no dependencies other than the
  Python Standard Library.


pkgId: c8a4c2da1443462d16d86efff12719187e4b9cb2ba4ee363b899dbd5cb5884b9
name: python3-brotli
arch: x86_64
version: 1.0.6
epoch: 0
release: 3.an8
summary: Lossless compression algorithm (python 3)
url: https://github.com/google/brotli
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: brotli-1.0.6-3.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/brotli/1.0.6/3.an8/x86_64/python3-brotli-1.0.6-3.an8.x86_64.rpm
checksum_type: sha256
description:
  Brotli is a generic-purpose lossless compression algorithm that compresses
  data using a combination of a modern variant of the LZ77 algorithm, Huffman
  coding and 2nd order context modeling, with a compression ratio comparable
  to the best currently available general-purpose compression methods.
  It is similar in speed with deflate but offers more dense compression.
  This package installs a Python 3 module.


pkgId: 50aeae0176a5bda34e3b1e54020fadd507dfbfdacb688fc259e7b1e107def407
name: python3-bson
arch: x86_64
version: 3.7.0
epoch: 0
release: 1.0.1.module+an8.7.0+10991+5846f372
summary: Python bson library
url: http://api.mongodb.org/python
rpm_license: ASL 2.0 and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-pymongo-3.7.0-1.0.1.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  BSON is a binary-encoded serialization of JSON-like documents. BSON is designed
  to be lightweight, traversable, and efficient. BSON, like JSON, supports the
  embedding of objects and arrays within other objects and arrays.  This package
  contains the python3 version of this module.

location_href:
  toplink/packages/python-pymongo/3.7.0/1.0.1.module+an8.7.0+10991+5846f372/x86_64/python3-bson-3.7.0-1.0.1.module+an8.7.0+10991+5846f372.x86_64.rpm


pkgId: dd138edc4a9b84f093b7c0000b6ce08dc49868687fb052365574f453c35e743e
name: python3-bytesize
arch: x86_64
version: 2.5
epoch: 0
release: 3.0.1.an8
summary: Python 3 bindings for libbytesize
url: https://github.com/storaged-project/libbytesize
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: libbytesize-2.5-3.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/libbytesize/2.5/3.0.1.an8/x86_64/python3-bytesize-2.5-3.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package contains Python 3 bindings for libbytesize making the use of
  the library from Python 3 easier and more convenient.


pkgId: 84c62ab5e62260041670eddd0b410710b20aae751a3d468c66ac75dd9ab7c6b0
name: python3-cairo-devel
arch: x86_64
version: 1.16.3
epoch: 0
release: 6.el8
summary: Libraries and headers for py3cairo
url: http://cairographics.org/pycairo
rpm_license: MPLv1.1 or LGPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: pycairo-1.16.3-6.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pycairo/1.16.3/6.el8/x86_64/python3-cairo-devel-1.16.3-6.el8.x86_64.rpm
checksum_type: sha256
description:
  This package contains files required to build wrappers for cairo add-on
  libraries so that they interoperate with py3cairo.


pkgId: 2134151f2abc5c1cb9993add7b9eb314ab29c27117729e4aa24638be6f6936e6
name: python3-cffi
arch: x86_64
version: 1.11.5
epoch: 0
release: 5.0.2.an8
summary: Foreign Function Interface for Python 3 to call C code
url: http://cffi.readthedocs.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-cffi-1.11.5-5.0.2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-cffi/1.11.5/5.0.2.an8/x86_64/python3-cffi-1.11.5-5.0.2.an8.x86_64.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python, providing a convenient and
  reliable way of calling existing C code from Python. The interface is
  based on LuaJIT’s FFI.


pkgId: 67ff1b02b5f1d8bf5b2eb191b2b2ec85f8aca201d88e68713731709c3e14ef85
name: python3-chardet
arch: noarch
version: 3.0.4
epoch: 0
release: 7.el8
summary: Character encoding auto-detection in Python 3
url: https://github.com/chardet/chardet
rpm_license: LGPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-chardet-3.0.4-7.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-chardet/3.0.4/7.el8/noarch/python3-chardet-3.0.4-7.el8.noarch.rpm
checksum_type: sha256
description:
  Character encoding auto-detection in Python. As
  smart as your browser. Open source.

  Python 3 version.


pkgId: 9bfa8c7519adefd478d15243b7c610bcd5a39d1e322ada37aff35cd33860040a
name: python3-clang
arch: x86_64
version: 15.0.7
epoch: 0
release: 1.0.3.module+an8.8.0+11135+e398acfc
summary: Python3 bindings for clang
description: Python3 bindings for clang.
url: http://llvm.org
rpm_license: NCSA
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: clang-15.0.7-1.0.3.module+an8.8.0+11135+e398acfc.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/clang/15.0.7/1.0.3.module+an8.8.0+11135+e398acfc/x86_64/python3-clang-15.0.7-1.0.3.module+an8.8.0+11135+e398acfc.x86_64.rpm


pkgId: 24565cf3db21651630d0a292dcd069b9f64eb71036c0dcd93f0b134309e60e66
name: python3-click
arch: noarch
version: 6.7
epoch: 0
release: 8.el8
summary: Simple wrapper around optparse for powerful command line utilities
url: https://github.com/mitsuhiko/click
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-click-6.7-8.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-click/6.7/8.el8/noarch/python3-click-6.7-8.el8.noarch.rpm
checksum_type: sha256
description:
  click is a Python package for creating beautiful command line
  interfaces in a composable way with as little amount of code as necessary.
  It's the "Command Line Interface Creation Kit".  It's highly configurable but
  comes with good defaults out of the box.

  Python 3 version.


pkgId: 770ad7f3ecf439ec62be4fc9fab76898bcad1c55e859d30c7d11e24c7303753c
name: python3-clufter
arch: noarch
version: 0.77.1
epoch: 0
release: 5.an8
summary: Library for transforming/analyzing cluster configuration formats
url: https://pagure.io/clufter
rpm_license: GPLv2+ and GFDL
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: clufter-0.77.1-5.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/clufter/0.77.1/5.an8/noarch/python3-clufter-0.77.1-5.an8.noarch.rpm
checksum_type: sha256
description:
  While primarily aimed at (CMAN,rgmanager)->(Corosync/CMAN,Pacemaker) cluster
  stacks configuration conversion (as per RHEL trend), the command-filter-format
  framework (capable of XSLT) offers also other uses through its plugin library.

  This package contains clufter library including built-in plugins.


pkgId: 6defd208b84041cef63073f711edbe169c3e93b45b0b63a385a3874fae9f6ade
name: python3-configobj
arch: noarch
version: 5.0.6
epoch: 0
release: 11.el8
summary: Config file reading, writing, and validation for Python 3
url: http://configobj.readthedocs.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-configobj-5.0.6-11.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-configobj/5.0.6/11.el8/noarch/python3-configobj-5.0.6-11.el8.noarch.rpm
checksum_type: sha256
description:
  ConfigObj is a simple but powerful configuration file reader and writer: an ini
  file round tripper. Its main feature is that it is very easy to use, with a
  straightforward programmer's interface and a simple syntax for config files.


pkgId: 01baea352ce90803bd9d9316d0d02bf131a09bf2a13aa5c304ba9942f6320992
name: python3-criu
arch: x86_64
version: 3.15
epoch: 0
release: 3.0.1.module+an8.7.0+11008+881d4b66
summary: Python bindings for criu
description: python3-criu contains Python bindings for criu.
url: http://criu.org/
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: criu-3.15-3.0.1.module+an8.7.0+11008+881d4b66.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/criu/3.15/3.0.1.module+an8.7.0+11008+881d4b66/x86_64/python3-criu-3.15-3.0.1.module+an8.7.0+11008+881d4b66.x86_64.rpm


pkgId: 79d1a5d593b2664c440f34db098e9c9083cda1a4dc7dfe5c4040a5e90c566f18
name: python3-cryptography
arch: x86_64
version: 3.2.1
epoch: 0
release: 5.an8
summary: PyCA's cryptography library
url: https://cryptography.io/en/latest/
rpm_license: ASL 2.0 or BSD
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-cryptography-3.2.1-5.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-cryptography/3.2.1/5.an8/x86_64/python3-cryptography-3.2.1-5.an8.x86_64.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: 0fc610cbb2d8009900d348bf1bd2e2eed0164eb29205ac21f700e37a0b55e015
name: python3-cryptography-vectors
arch: noarch
version: 3.2.1
epoch: 0
release: 1.an8
summary: Test vectors for the cryptography package
url: https://pypi.python.org/pypi/cryptography-vectors
rpm_license: ASL 2.0 or BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-cryptography-vectors-3.2.1-1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Test vectors for the cryptography package.

  The only purpose of this package is to be a building requirement for
  python-cryptography, otherwise it has no use. Don’t install it unless
  you really know what you are doing.

location_href:
  toplink/packages/python-cryptography-vectors/3.2.1/1.an8/noarch/python3-cryptography-vectors-3.2.1-1.an8.noarch.rpm


pkgId: c19dc5c12b15298a18c8ecb47e5d4c445b7be12db8f4c851eecfc09a3330bb67
name: python3-cups
arch: x86_64
version: 1.9.72
epoch: 0
release: 21.0.1.an8
summary: Python3 bindings for CUPS API, known as pycups.
url: http://cyberelk.net/tim/software/pycups/
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-cups-1.9.72-21.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-cups/1.9.72/21.0.1.an8/x86_64/python3-cups-1.9.72-21.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  This package provides Python 3 bindings for CUPS API,
  known as pycups. It was written for use with
  system-config-printer, but can be put to other uses as well.


pkgId: ff2bd0a00e3032a135df54da15efbe8134bda3ecf21fb270ff3e63d0837a8f8a
name: python3-custodia
arch: noarch
version: 0.6.0
epoch: 0
release: 3.module+an8.8.0+11063+69aa3411
summary: Sub-package with python3 custodia modules
url: https://github.com/latchset/custodia
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: custodia-0.6.0-3.module+an8.8.0+11063+69aa3411.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Sub-package with python custodia modules


  Custodia is a Secrets Service Provider, it stores or proxies access to
  keys, password, and secret material in general. Custodia is built to
  use the HTTP protocol and a RESTful API as an IPC mechanism over a local
  Unix Socket. It can also be exposed to a network via a Reverse Proxy
  service assuming proper authentication and header validation is
  implemented in the Proxy.

  Custodia is modular, the configuration file controls how authentication,
  authorization, storage and API plugins are combined and exposed.

location_href:
  toplink/packages/custodia/0.6.0/3.module+an8.8.0+11063+69aa3411/noarch/python3-custodia-0.6.0-3.module+an8.8.0+11063+69aa3411.noarch.rpm


pkgId: b4b40e93138886936049a3f79a7048c2d10b5c212bb0ab880c5309f845c06554
name: python3-dasbus
arch: noarch
version: 1.2
epoch: 0
release: 2.an8
summary: DBus library in Python 3
url: https://pypi.python.org/pypi/dasbus
rpm_license: LGPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-dasbus-1.2-2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-dasbus/1.2/2.an8/noarch/python3-dasbus-1.2-2.an8.noarch.rpm
checksum_type: sha256
description:
  Dasbus is a DBus library written in Python 3, based on
  GLib and inspired by pydbus. It is designed to be easy
  to use and extend.


pkgId: d35aaff3cb93db15bd92eddd9cac2cd2a5aa0d3805729d2e61b28486aad04ff0
name: python3-dateutil
arch: noarch
version: 2.6.1
epoch: 1
release: 6.el8
summary: Powerful extensions to the standard datetime module
url: https://github.com/dateutil/dateutil
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-dateutil-2.6.1-6.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-dateutil/2.6.1/6.el8/noarch/python3-dateutil-2.6.1-6.el8.noarch.rpm
checksum_type: sha256
description:
  The dateutil module provides powerful extensions to the standard datetime
  module available in Python.

  This is the version for Python 3.


pkgId: 587935b88c62e7d3b38bea51d42fc090b25a749b4d98316982d117ee0c34bf23
name: python3-dbus-client-gen
arch: noarch
version: 0.4
epoch: 0
release: 1.el8
summary: Library for Generating D-Bus Client Code
url: https://github.com/stratis-storage/dbus-client-gen
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-dbus-client-gen-0.4-1.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This library contains a few methods that consume an XML specification
  of a D-Bus interface and return classes or functions that may be useful
  in constructing a python D-Bus client. The XML specification has the format
  of the data returned by the Introspect() method
  of the Introspectable interface.

  Python 3 version.

location_href:
  toplink/packages/python-dbus-client-gen/0.4/1.el8/noarch/python3-dbus-client-gen-0.4-1.el8.noarch.rpm


pkgId: a13fd639b908867533a4284ef9f3c689c0ea31702fc2c2aecee81436744f8f62
name: python3-dbus-python-client-gen
arch: noarch
version: 0.7
epoch: 0
release: 3.el8
summary: Python Library for Generating dbus-python Client Code
description:
  Python Library for Generating dbus-python Client Code.

  Python 3 version.

url: https://github.com/stratis-storage/dbus-python-client-gen
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-dbus-python-client-gen-0.7-3.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-dbus-python-client-gen/0.7/3.el8/noarch/python3-dbus-python-client-gen-0.7-3.el8.noarch.rpm


pkgId: 08798479bc2bd4e4b8eb71b09e6110792db5bb2288556f12c19dac1cd902a9da
name: python3-dbus-signature-pyparsing
arch: noarch
version: 0.03
epoch: 0
release: 2.el8
summary: Parser for a D-Bus Signature
description:
  Parser for a D-Bus Signature.

  Python 3 version.

url: https://github.com/stratis-storage/dbus-signature-pyparsing
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-dbus-signature-pyparsing-0.03-2.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-dbus-signature-pyparsing/0.03/2.el8/noarch/python3-dbus-signature-pyparsing-0.03-2.el8.noarch.rpm


pkgId: 79f5d8765f1465abc3e84fc666bc5875cbcf345714f51c3a01412498f60543bf
name: python3-decorator
arch: noarch
version: 4.2.1
epoch: 0
release: 2.el8
summary: Module to simplify usage of decorators in python3
url: https://github.com/micheles/decorator
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-decorator-4.2.1-2.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-decorator/4.2.1/2.el8/noarch/python3-decorator-4.2.1-2.el8.noarch.rpm
checksum_type: sha256
description:
  The aim of the decorator module is to simplify the usage of decorators for
  the average programmer, and to popularize decorators usage giving examples
  of useful decorators, such as memoize, tracing, redirecting_stdout, locked,
  etc.  The core of this module is a decorator factory called decorator.


pkgId: d1a18200c720af5fecded61ccea88a01db42f4c258732392cdabdc6c797c4db5
name: python3-devel
arch: x86_64
version: 3.6.8
epoch: 0
release: 51.0.1.an8.1
summary: Libraries and header files needed for Python development
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python3-3.6.8-51.0.1.an8.1.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python3/3.6.8/51.0.1.an8.1/x86_64/python3-devel-3.6.8-51.0.1.an8.1.x86_64.rpm
checksum_type: sha256
description:
  This package contains the header files and configuration needed to compile
  Python extension modules (typically written in C or C++), to embed Python
  into other programs, and to make binary distributions for Python libraries.

  It also contains the necessary macros to build RPM packages with Python modules
  and 2to3 tool, an automatic source converter from Python 2.X.

  It also makes the "python3" and "python3-config" commands available
  for compatibility with some build systems.
  When building packages, prefer requiring platform-python-devel and using
  the %{__python3} macro instead, if possible.


pkgId: d6770453dd0dd269ee7228242ee9b65b9a1b165ff5e4795c925be53e424c358f
name: python3-distro
arch: noarch
version: 1.4.0
epoch: 0
release: 2.module+an8.7.0+10991+5846f372
summary: Linux Distribution - a Linux OS platform information API
url: https://github.com/nir0s/distro
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-distro-1.4.0-2.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The distro (for: Linux Distribution) package provides information about the
  Linux distribution it runs on, such as a reliable machine-readable ID, or
  version information.

  It is a renewed alternative implementation for Python's original
  platform.linux_distribution function, but it also provides much more
  functionality. An alternative implementation became necessary because
  Python 3.5 deprecated this function, and Python 3.7 is expected to remove it
  altogether. Its predecessor function platform.dist was already deprecated since
  Python 2.6 and is also expected to be removed in Python 3.7. Still, there are
  many cases in which access to that information is needed. See Python issue 1322
  for more information.

  Python 3 version.

location_href:
  toplink/packages/python-distro/1.4.0/2.module+an8.7.0+10991+5846f372/noarch/python3-distro-1.4.0-2.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: c2c8a5a5d06a8be89b9ef1398f491080d8b5071e948337ac8d246fa8091415f7
name: python3-dmidecode
arch: x86_64
version: 3.12.3
epoch: 0
release: 2.an8
summary: Python 3 module to access DMI data
url: https://github.com/nima/python-dmidecode
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: System Environment/Libraries
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python-dmidecode-3.12.3-2.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-dmidecode/3.12.3/2.an8/x86_64/python3-dmidecode-3.12.3-2.an8.x86_64.rpm
checksum_type: sha256
description:
  python3-dmidecode is a Python 3 extension module that uses the
  code-base of the 'dmidecode' utility, and presents the data
  as Python 3 data structures or as XML data using libxml2.


pkgId: 0d107db0a0f1a228514021dcc62dd0e3b3c288fdefc5a03d646e1660eeca6331
name: python3-dnf-plugin-modulesync
arch: noarch
version: 4.0.21
epoch: 0
release: 19.an8
summary: Download module metadata and packages and create repository
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: dnf-plugins-core-4.0.21-19.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Download module metadata from all enabled repositories, module artifacts and profiles of matching modules and create
  repository.

location_href:
  toplink/packages/dnf-plugins-core/4.0.21/19.an8/noarch/python3-dnf-plugin-modulesync-4.0.21-19.an8.noarch.rpm


pkgId: 2736de5d2b8c8b9083555742ef544971260aab99837b53708fa1f0b1cf633601
name: python3-dnf-plugin-post-transaction-actions
arch: noarch
version: 4.0.21
epoch: 0
release: 19.an8
summary: Post transaction actions Plugin for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: dnf-plugins-core-4.0.21-19.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Post transaction actions Plugin for DNF, Python 3 version. Plugin runs actions
  (shell commands) after transaction is completed. Actions are defined in action
  files.

location_href:
  toplink/packages/dnf-plugins-core/4.0.21/19.an8/noarch/python3-dnf-plugin-post-transaction-actions-4.0.21-19.an8.noarch.rpm


pkgId: acbe48f9c444f7ed0c74ff7c1228b954c0d515e478c35c4e11a88a77fe32a58b
name: python3-dnf-plugin-versionlock
arch: noarch
version: 4.0.21
epoch: 0
release: 19.an8
summary: Version Lock Plugin for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: dnf-plugins-core-4.0.21-19.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Version lock plugin takes a set of name/versions for packages and excludes all other
  versions of those packages. This allows you to e.g. protect packages from being
  updated by newer versions.

location_href:
  toplink/packages/dnf-plugins-core/4.0.21/19.an8/noarch/python3-dnf-plugin-versionlock-4.0.21-19.an8.noarch.rpm


pkgId: 8dd6e4c9b19531be15358a1c5ab080200008e8a34b7085e5fec03149efe539fe
name: python3-dnf-plugins-core
arch: noarch
version: 4.0.21
epoch: 0
release: 19.an8
summary: Core Plugins for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: dnf-plugins-core-4.0.21-19.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Core Plugins for DNF, Python 3 interface. This package enhances DNF with builddep,
  config-manager, copr, debug, debuginfo-install, download, needs-restarting,
  groups-manager, repoclosure, repograph, repomanage, reposync, changelog,
  repodiff, system-upgrade, offline-upgrade and offline-distrosync commands.
  Additionally provides generate_completion_cache passive plugin.

location_href:
  toplink/packages/dnf-plugins-core/4.0.21/19.an8/noarch/python3-dnf-plugins-core-4.0.21-19.an8.noarch.rpm


pkgId: c82d50cad8406c6ba0290972079a860fec9841ab2d7cf8a1c96165bbee3a1b4d
name: python3-dns
arch: noarch
version: 1.15.0
epoch: 0
release: 11.an8
summary: DNS toolkit for Python 3
url: http://www.dnspython.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: python-dns-1.15.0-11.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-dns/1.15.0/11.an8/noarch/python3-dns-1.15.0-11.an8.noarch.rpm
checksum_type: sha256
description:
  dnspython3 is a DNS toolkit for Python 3. It supports almost all
  record types. It can be used for queries, zone transfers, and dynamic
  updates. It supports TSIG authenticated messages and EDNS0.

  dnspython3 provides both high and low level access to DNS. The high
  level classes perform queries for data of a given name, type, and
  class, and return an answer set. The low level classes allow direct
  manipulation of DNS zones, messages, names, and records.


pkgId: dd5450fe9ea1d765219db2a31b94d2c23c5a5dca66bb2ea34611c0ccb94fce60
name: python3-docs
arch: noarch
version: 3.6.7
epoch: 0
release: 2.module+an8.7.0+10991+5846f372
summary: Documentation for the Python 3 programming language
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Documentation
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: python-docs-3.6.7-2.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The python3-docs package contains documentation on the Python 3
  programming language and interpreter.

  Install the python3-docs package if you'd like to use the documentation
  for the Python 3 language.

location_href:
  toplink/packages/python-docs/3.6.7/2.module+an8.7.0+10991+5846f372/noarch/python3-docs-3.6.7-2.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: 26937e6a6950d1ae14ef31d6cd223fcabffbf547dac81395f65be914c8e65101
name: python3-docutils
arch: noarch
version: 0.14
epoch: 0
release: 12.module+an8.7.0+10991+5846f372
summary: System for processing plaintext documentation for python3
url: http://docutils.sourceforge.net
rpm_license: Public Domain and BSD and Python and GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: iZ2zedi3462lmk3h9qy0noZ
rpm_sourcerpm: python-docutils-0.14-12.module+an8.7.0+10991+5846f372.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The Docutils project specifies a plaintext markup language, reStructuredText,
  which is easy to read and quick to write.  The project includes a python
  library to parse rST files and transform them into other useful formats such
  as HTML, XML, and TeX as well as commandline tools that give the enduser
  access to this functionality.

  Currently, the library supports parsing rST that is in standalone files and
  PEPs (Python Enhancement Proposals).  Work is underway to parse rST from
  Python inline documentation modules and packages.

  This package contains the module, ported to run under python3.

location_href:
  toplink/packages/python-docutils/0.14/12.module+an8.7.0+10991+5846f372/noarch/python3-docutils-0.14-12.module+an8.7.0+10991+5846f372.noarch.rpm


pkgId: 210a7940067d2e2ac16eda9a1d2ea90b4195bad4012497392ef0302659781d7c
name: python3-ethtool
arch: x86_64
version: 0.14
epoch: 0
release: 5.an8
summary: Python module to interface with ethtool
url: https://github.com/fedora-python/python-ethtool
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: python-ethtool-0.14-5.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-ethtool/0.14/5.an8/x86_64/python3-ethtool-0.14-5.an8.x86_64.rpm
checksum_type: sha256
description:
  Python 3 bindings for the ethtool kernel interface, that allows querying and
  changing of Ethernet card settings, such as speed, port, auto-negotiation, and
  PCI locations.


pkgId: 277b5562243ff1bdbbb39ca8a1eb32e43f029b8701a1f8793b3565a26ec31e7d
name: python3-evdev
arch: x86_64
version: 1.1.2
epoch: 0
release: 3.el8
summary: Python bindings for the Linux input handling subsystem
url: https://python-evdev.readthedocs.io
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-evdev-1.1.2-3.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-evdev/1.1.2/3.el8/x86_64/python3-evdev-1.1.2-3.el8.x86_64.rpm
checksum_type: sha256
description:
  This package provides python bindings to the generic input event interface in
  Linux. The evdev interface serves the purpose of passing events generated in
  the kernel directly to userspace through character devices that are typically
  located in /dev/input/.

  This package also comes with bindings to uinput, the userspace input subsystem.
  Uinput allows userspace programs to create and handle input devices that can
  inject events directly into the input subsystem.

  In other words, python-evdev allows you to read and write input events on Linux.
  An event can be a key or button press, a mouse movement or a tap on a
  touchscreen.


pkgId: aec6d0d62fb30b03bbbafdf2acd2c313ac635088cf8e316ee5707ad97ea21901
name: python3-flask
arch: noarch
version: 0.12.2
epoch: 1
release: 4.el8
summary: A micro-framework for Python based on Werkzeug, Jinja 2 and good intentions
url: http://flask.pocoo.org/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-flask-0.12.2-4.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-flask/0.12.2/4.el8/noarch/python3-flask-0.12.2-4.el8.noarch.rpm
checksum_type: sha256
description:
  Flask is called a “micro-framework” because the idea to keep the core
  simple but extensible. There is no database abstraction layer, no form
  validation or anything else where different libraries already exist
  that can handle that. However Flask knows the concept of extensions
  that can add this functionality into your application as if it was
  implemented in Flask itself. There are currently extensions for object
  relational mappers, form validation, upload handling, various open
  authentication technologies and more.

  Python 3 version.


pkgId: 2e36080a8dbc86aa941e0215a08d652d3f2c2b24ceba413545a7467f0048ba23
name: python3-gevent
arch: x86_64
version: 1.2.2
epoch: 0
release: 4.el8
summary: A coroutine-based Python networking library
url: http://www.gevent.org/
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-gevent-1.2.2-4.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-gevent/1.2.2/4.el8/x86_64/python3-gevent-1.2.2-4.el8.x86_64.rpm
checksum_type: sha256
description:
  gevent is a coroutine-based Python networking library that uses greenlet to
  provide a high-level synchronous API on top of libevent event loop.

  Features include:

    * convenient API around greenlets
    * familiar synchronization primitives (gevent.event, gevent.queue)
    * socket module that cooperates
    * WSGI server on top of libevent-http
    * DNS requests done through libevent-dns
    * monkey patching utility to get pure Python modules to cooperate

  Python 3 version.


pkgId: 0ff11497c496be16a47c8789a3b2d1219109d2f35aa8c6ea47cd69a8bb5a270d
name: python3-gflags
arch: noarch
version: 2.0
epoch: 0
release: 13.an8
summary: Commandline flags module for Python 3
url: https://github.com/gflags/python-gflags
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-gflags-2.0-13.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-gflags/2.0/13.an8/noarch/python3-gflags-2.0-13.an8.noarch.rpm
checksum_type: sha256
description:
  This project is the python equivalent of google-gflags, a Google commandline
  flag implementation for C++. It is intended to be used in situations where a
  project wants to mimic the command-line flag handling of a C++ app that uses
  google-gflags, or for a Python app that, via swig or some other means, is
  linked with a C++ app that uses google-gflags.

  The gflags package contains a library that implements commandline flags
  processing. As such it's a replacement for getopt(). It has increased
  flexibility, including built-in support for Python types, and the ability to
  define flags in the source file in which they're used. (This last is its major
  difference from OptParse.)


pkgId: 24295ab51e76f240f3c8d9cca13e5ec9c399290d8831a799e3adf21c4c728c8f
name: python3-gluster
arch: x86_64
version: 6.0
epoch: 0
release: 61.3.0.1.an8
summary: GlusterFS python library
url: http://docs.gluster.org/
rpm_license: GPLv2 or LGPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-02.openanolis.cn
rpm_sourcerpm: glusterfs-6.0-61.3.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/glusterfs/6.0/61.3.0.1.an8/x86_64/python3-gluster-6.0-61.3.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  GlusterFS is a distributed file-system capable of scaling to several
  petabytes. It aggregates various storage bricks over Infiniband RDMA
  or TCP/IP interconnect into one large parallel network file
  system. GlusterFS is one of the most sophisticated file systems in
  terms of features and extensibility.  It borrows a powerful concept
  called Translators from GNU Hurd kernel. Much of the code in GlusterFS
  is in user space and easily manageable.

  This package contains the python modules of GlusterFS and own gluster
  namespace.


pkgId: 40bfb9b2bf534bc1346e738aa8f5fb487121318402db483749881e383658f8a5
name: python3-gobject
arch: x86_64
version: 3.40.1
epoch: 0
release: 6.0.1.an8
summary: Python 3 bindings for GObject Introspection
url: https://wiki.gnome.org/Projects/PyGObject
rpm_license: LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pygobject3-3.40.1-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/pygobject3/3.40.1/6.0.1.an8/x86_64/python3-gobject-3.40.1-6.0.1.an8.x86_64.rpm
checksum_type: sha256
description:
  The python3-gobject package provides a convenient wrapper for the GObject
  library and and other libraries that are compatible with GObject Introspection,
  for use in Python 3 programs.


pkgId: a8fad59e00fd9fa4643925c509c3f28fe42a53d598a9b4572ee46353219c422a
name: python3-gobject-base
arch: x86_64
version: 3.40.1
epoch: 0
release: 6.0.1.an8
summary: Python 3 bindings for GObject Introspection base package
url: https://wiki.gnome.org/Projects/PyGObject
rpm_license: LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pygobject3-3.40.1-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package provides the non-cairo specific bits of the GObject Introspection
  library that are architecture specific.

location_href:
  toplink/packages/pygobject3/3.40.1/6.0.1.an8/x86_64/python3-gobject-base-3.40.1-6.0.1.an8.x86_64.rpm


pkgId: b77d6091b94192c972765c219a94ac7c59cedc79e9dc4d657357b78873d44a54
name: python3-gobject-base-noarch
arch: noarch
version: 3.40.1
epoch: 0
release: 6.0.1.an8
summary: Python 3 bindings for GObject Introspection base (not architecture dependent)
url: https://wiki.gnome.org/Projects/PyGObject
rpm_license: LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pygobject3-3.40.1-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package provides the non-cairo specific bits of the GObject Introspection
  library that are not architecture specific.

location_href:
  toplink/packages/pygobject3/3.40.1/6.0.1.an8/noarch/python3-gobject-base-noarch-3.40.1-6.0.1.an8.noarch.rpm


pkgId: dd8ce8258590cfe660432ad832e4b50305b1387d8a11a3ee6ec09151fc73c7da
name: python3-gobject-devel
arch: x86_64
version: 3.40.1
epoch: 0
release: 6.0.1.an8
summary: Development files for embedding PyGObject introspection support
description: This package contains files required to embed PyGObject
url: https://wiki.gnome.org/Projects/PyGObject
rpm_license: LGPLv2+ and MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: pygobject3-3.40.1-6.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/pygobject3/3.40.1/6.0.1.an8/x86_64/python3-gobject-devel-3.40.1-6.0.1.an8.x86_64.rpm


pkgId: 1d61c56a623794781089d5808c2ef2b10997c5a50060ffa86a591617caac64ff
name: python3-google-api-client
arch: noarch
version: 1.6.5
epoch: 0
release: 3.an8
summary: Google APIs Client Library for Python
url: http://github.com/google/google-api-python-client/
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: google-api-python-client-1.6.5-3.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Written by Google, this library provides a small, flexible, and powerful
  Python 3 client library for accessing Google APIs.

location_href:
  toplink/packages/google-api-python-client/1.6.5/3.an8/noarch/python3-google-api-client-1.6.5-3.an8.noarch.rpm


pkgId: 28d6a0e527854ded9ab6b8f4cac200a4b6b625d5db0db3c725915d56d449abbb
name: python3-greenlet
arch: x86_64
version: 0.4.13
epoch: 0
release: 4.0.1.an8
summary: Lightweight in-process concurrent programming
url: https://github.com/python-greenlet/greenlet
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-greenlet-0.4.13-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The greenlet package is a spin-off of Stackless, a version of CPython
  that supports micro-threads called "tasklets". Tasklets run
  pseudo-concurrently (typically in a single or a few OS-level threads)
  and are synchronized with data exchanges on "channels".

  Python 3 version.

location_href:
  toplink/packages/python-greenlet/0.4.13/4.0.1.an8/x86_64/python3-greenlet-0.4.13-4.0.1.an8.x86_64.rpm


pkgId: 4a5bb96394fdead1810646f3e9d03b448a28eb228102dc75ec278f319205570a
name: python3-greenlet-devel
arch: x86_64
version: 0.4.13
epoch: 0
release: 4.0.1.an8
summary: C development headers for python3-greenlet
description:
  C development headers for python3-greenlet.

  Python 3 version.

url: https://github.com/python-greenlet/greenlet
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-greenlet-0.4.13-4.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/python-greenlet/0.4.13/4.0.1.an8/x86_64/python3-greenlet-devel-0.4.13-4.0.1.an8.x86_64.rpm


pkgId: fc09eef4de997a07d9d185d1c0ad0f9c84ce9e3826d57792936cbd2a8e9d2857
name: python3-gssapi
arch: x86_64
version: 1.5.1
epoch: 0
release: 5.el8
summary: Python 3 Bindings for GSSAPI (RFC 2743/2744 and extensions)
url: https://github.com/pythongssapi/python-gssapi
rpm_license: ISC
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-gssapi-1.5.1-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-gssapi/1.5.1/5.el8/x86_64/python3-gssapi-1.5.1-5.el8.x86_64.rpm
checksum_type: sha256
description:
  A set of Python bindings to the GSSAPI C library providing both
  a high-level pythonic interfaces and a low-level interfaces
  which more closely matches RFC 2743.  Includes support for
  RFC 2743, as well as multiple extensions.


pkgId: 2f52bf05a2887577b261e47e7d965fd58225aa5a653a8372f49e338e685a9f84
name: python3-hivex
arch: x86_64
version: 1.3.18
epoch: 0
release: 23.module+an8.7.0+10987+3885000d
summary: Python 3 bindings for hivex
description: python3-hivex contains Python 3 bindings for hivex.
url: http://libguestfs.org/
rpm_license: LGPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: hivex-1.3.18-23.module+an8.7.0+10987+3885000d.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
location_href:
  toplink/packages/hivex/1.3.18/23.module+an8.7.0+10987+3885000d/x86_64/python3-hivex-1.3.18-23.module+an8.7.0+10987+3885000d.x86_64.rpm


pkgId: 6577a88d32d753e52a4508bd7684e1b5f32cda87fe8d02d6e913ad5c3c55385e
name: python3-hs-dbus-signature
arch: noarch
version: 0.06
epoch: 0
release: 3.el8
summary: Hypothesis Strategy for Generating Arbitrary DBus Signatures
url: https://github.com/stratis-storage/hs-dbus-signature
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-hs-dbus-signature-0.06-3.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  This package contains a Hypothesis strategy for generating DBus signatures.

  The strategy is intended to be both sound and complete. That is, it should
  never generate an invalid DBus signature and it should be capable,
  modulo size constraints, of generating any valid DBus signature.

  Python 3 version.

location_href:
  toplink/packages/python-hs-dbus-signature/0.06/3.el8/noarch/python3-hs-dbus-signature-0.06-3.el8.noarch.rpm


pkgId: 38e91e9f58b9a6e7e4fe901761271fbf770a6834beb901d132f3cc15346c68d9
name: python3-html5lib
arch: noarch
version: 0.999999999
epoch: 1
release: 6.el8
summary: A python based HTML parser/tokenizer
url: https://pypi.python.org/pypi/html5lib
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-html5lib-0.999999999-6.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  A python based HTML parser/tokenizer based on the WHATWG HTML5
  specification for maximum compatibility with major desktop web browsers.

location_href:
  toplink/packages/python-html5lib/0.999999999/6.el8/noarch/python3-html5lib-0.999999999-6.el8.noarch.rpm


pkgId: 9c4d6162b8f9d48957cfa06ed90b49b5564d690e9be60c63056a2220fe1c442a
name: python3-humanize
arch: noarch
version: 0.5.1
epoch: 0
release: 13.el8
summary: Turns dates in to human readable format, e.g '3 minutes ago'
url: https://github.com/jmoiron/humanize
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-humanize-0.5.1-13.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-humanize/0.5.1/13.el8/noarch/python3-humanize-0.5.1-13.el8.noarch.rpm
checksum_type: sha256
description:
  This modest package contains various common humanization utilities, like turning
  a number into a fuzzy human readable duration ('3 minutes ago') or into a human
  readable size or throughput.


pkgId: b78064b016331b3f687357894aeb153622ef8329a4f740f1d2f3747b84cfca9a
name: python3-hwdata
arch: noarch
version: 2.3.6
epoch: 0
release: 3.el8
summary: Python bindings to hwdata package
url: https://github.com/xsuchy/python-hwdata
rpm_license: GPLv2
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-hwdata-2.3.6-3.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-hwdata/2.3.6/3.el8/noarch/python3-hwdata-2.3.6-3.el8.noarch.rpm
checksum_type: sha256
description:
  Provide python interface to database stored in hwdata package.
  It allows you to get human readable description of USB and PCI devices.

  This is the Python 3 build of the module.


pkgId: 3875936b162e5e3793db742b4a2fef672e6a7569a29b445ae0e74818e4767a28
name: python3-hypothesis
arch: noarch
version: 3.44.24
epoch: 0
release: 6.el8
summary: Library for property based testing
url: https://github.com/HypothesisWorks/hypothesis-python
rpm_license: MPLv2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-hypothesis-3.44.24-6.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-hypothesis/3.44.24/6.el8/noarch/python3-hypothesis-3.44.24-6.el8.noarch.rpm
checksum_type: sha256
description:
  Hypothesis is a library for testing your Python code against a much
  larger range of examples than you would ever want to write by
  hand. It’s based on the Haskell library, Quickcheck, and is designed
  to integrate seamlessly into your existing Python unit testing work
  flow.


pkgId: 8e3eaf622a46bce8441a687365c85318cc5bf9f957b3f3df937c4bb8c84bb1a5
name: python3-idle
arch: x86_64
version: 3.6.8
epoch: 0
release: 51.0.1.an8.1
summary: A basic graphical development environment for Python
url: https://www.python.org/
rpm_license: Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: python3-3.6.8-51.0.1.an8.1.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python3/3.6.8/51.0.1.an8.1/x86_64/python3-idle-3.6.8-51.0.1.an8.1.x86_64.rpm
checksum_type: sha256
description:
  IDLE is Python’s Integrated Development and Learning Environment.

  IDLE has the following features: Python shell window (interactive
  interpreter) with colorizing of code input, output, and error messages;
  multi-window text editor with multiple undo, Python colorizing,
  smart indent, call tips, auto completion, and other features;
  search within any window, replace within editor windows, and
  search through multiple files (grep); debugger with persistent
  breakpoints, stepping, and viewing of global and local namespaces;
  configuration, browsers, and other dialogs.


pkgId: 19bf106caf4d80bcdf2c22e704c220ea1b3c4761be4f4801c72ced9fc352e2c8
name: python3-idna
arch: noarch
version: 2.5
epoch: 0
release: 5.el8
summary: Internationalized Domain Names in Applications (IDNA)
url: https://github.com/kjd/idna
rpm_license: BSD and Python and Unicode
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-idna-2.5-5.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-idna/2.5/5.el8/noarch/python3-idna-2.5-5.el8.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in Applications (IDNA)
  protocol as specified in RFC 5891 <http://tools.ietf.org/html/rfc5891>.  This
  version of the protocol is often referred to as "IDNA2008" and can produce
  different results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement for the
  "encodings.idna" module that comes with the Python standard library but
  currently only supports the older 2003 specification.


pkgId: 03226a3a7da0acd4a8576eb2a45731caaa43993a5bf1f757ddbe2fecd304e16b
name: python3-imagesize
arch: noarch
version: 1.0.0
epoch: 0
release: 2.el8
summary: Python module for analyzing image file headers and returning image sizes
url: https://github.com/shibukawa/imagesize_py
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-imagesize-1.0.0-2.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-imagesize/1.0.0/2.el8/noarch/python3-imagesize-1.0.0-2.el8.noarch.rpm
checksum_type: sha256
description:
  The imagesize package parses image file headers and returns the image sizes.

  * PNG
  * JPEG
  * JPEG2000
  * GIF

  This is a pure Python library.


pkgId: f087455f30248e41c08d52109a4d9d434c89e356f5b4b05f67d96cd40d6ac025
name: python3-iniparse
arch: noarch
version: 0.4
epoch: 0
release: 31.el8
summary: Python Module for Accessing and Modifying Configuration Data in INI files
url: http://code.google.com/p/iniparse/
rpm_license: MIT and Python
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-iniparse-0.4-31.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-iniparse/0.4/31.el8/noarch/python3-iniparse-0.4-31.el8.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible
  with the standard library's ConfigParser, preserves structure of INI
  files (order of sections & options, indentation, comments, and blank
  lines are preserved when data is updated), and is more convenient to
  use.


pkgId: fb0259816a50c5174291e286d466c3a219cfb85cc339c623189b9c1f2baf90ed
name: python3-inotify
arch: noarch
version: 0.9.6
epoch: 0
release: 13.el8
summary: Monitor filesystem events with Python under Linux
url: https://github.com/seb-m/pyinotify
rpm_license: MIT
rpm_vendor: OpenAnolis Community
rpm_group: Development/Languages
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-inotify-0.9.6-13.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-inotify/0.9.6/13.el8/noarch/python3-inotify-0.9.6-13.el8.noarch.rpm
checksum_type: sha256
description:
  This is a Python 3 module for watching filesystems changes. pyinotify
  can be used for various kind of fs monitoring. pyinotify relies on a
  recent Linux Kernel feature (merged in kernel 2.6.13) called
  inotify. inotify is an event-driven notifier, its notifications are
  exported from kernel space to user space.


pkgId: e8c57a9bc94f1efe216bd811f0b797cb71fc764b8cd79a4ae36e27348a3e8286
name: python3-into-dbus-python
arch: noarch
version: 0.06
epoch: 0
release: 2.el8
summary: Transformer to dbus-python types
url: https://github.com/stratis-storage/into-dbus-python
rpm_license: ASL 2.0
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: python-into-dbus-python-0.06-2.el8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  Facilities for converting an object that inhabits core Python types, e.g.,
  lists, ints, dicts, to an object that inhabits dbus-python types, e.g.,
  dbus.Array, dbus.UInt32, dbus.Dictionary based on a specified dbus signature.

  Python 3 version.

location_href:
  toplink/packages/python-into-dbus-python/0.06/2.el8/noarch/python3-into-dbus-python-0.06-2.el8.noarch.rpm


pkgId: 8bfed8a7d9e11e748da92e0649c873a40465391f3bb3971f808ff62d870d4602
name: python3-ipaclient
arch: noarch
version: 4.9.11
epoch: 0
release: 5.0.1.module+an8.8.0+11063+69aa3411
summary: Python libraries used by IPA client
url: http://www.freeipa.org/
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: ipa-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  IPA is an integrated solution to provide centrally managed Identity (users,
  hosts, services), Authentication (SSO, 2FA), and Authorization
  (host access control, SELinux user roles, services). The solution provides
  features for further integration with Linux based clients (SUDO, automount)
  and integration with Active Directory based infrastructures (Trusts).
  If your network uses IPA for authentication, this package should be
  installed on every client machine.

location_href:
  toplink/packages/ipa/4.9.11/5.0.1.module+an8.8.0+11063+69aa3411/noarch/python3-ipaclient-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.noarch.rpm


pkgId: 30ee2dc2f31196e8f5d9d819093fa479956e14fa630c836d780ab7ab2c60fbb0
name: python3-ipalib
arch: noarch
version: 4.9.11
epoch: 0
release: 5.0.1.module+an8.8.0+11063+69aa3411
summary: Python3 libraries used by IPA
url: http://www.freeipa.org/
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: ipa-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  IPA is an integrated solution to provide centrally managed Identity (users,
  hosts, services), Authentication (SSO, 2FA), and Authorization
  (host access control, SELinux user roles, services). The solution provides
  features for further integration with Linux based clients (SUDO, automount)
  and integration with Active Directory based infrastructures (Trusts).
  If you are using IPA with Python 3, you need to install this package.

location_href:
  toplink/packages/ipa/4.9.11/5.0.1.module+an8.8.0+11063+69aa3411/noarch/python3-ipalib-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.noarch.rpm


pkgId: b629bdd4b28f5e72cbe287b81243f5e53aec7d9b8aee896fa75cf872dcfaa07b
name: python3-ipaserver
arch: noarch
version: 4.9.11
epoch: 0
release: 5.0.1.module+an8.8.0+11063+69aa3411
summary: Python libraries used by IPA server
url: http://www.freeipa.org/
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: ipa-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  IPA is an integrated solution to provide centrally managed Identity (users,
  hosts, services), Authentication (SSO, 2FA), and Authorization
  (host access control, SELinux user roles, services). The solution provides
  features for further integration with Linux based clients (SUDO, automount)
  and integration with Active Directory based infrastructures (Trusts).
  If you are installing an IPA server, you need to install this package.

location_href:
  toplink/packages/ipa/4.9.11/5.0.1.module+an8.8.0+11063+69aa3411/noarch/python3-ipaserver-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.noarch.rpm


pkgId: aafe7ec5b8929ae81b351e4fbfa39f68ee058d8d4699135672856021b5152605
name: python3-ipatests
arch: noarch
version: 4.9.11
epoch: 0
release: 5.0.1.module+an8.8.0+11063+69aa3411
summary: IPA tests and test tools
url: http://www.freeipa.org/
rpm_license: GPLv3+
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: iZ2ze7dcak6kcy6zqdazjgZ
rpm_sourcerpm: ipa-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  IPA is an integrated solution to provide centrally managed Identity (users,
  hosts, services), Authentication (SSO, 2FA), and Authorization
  (host access control, SELinux user roles, services). The solution provides
  features for further integration with Linux based clients (SUDO, automount)
  and integration with Active Directory based infrastructures (Trusts).
  This package contains tests that verify IPA functionality under Python 3.

location_href:
  toplink/packages/ipa/4.9.11/5.0.1.module+an8.8.0+11063+69aa3411/noarch/python3-ipatests-4.9.11-5.0.1.module+an8.8.0+11063+69aa3411.noarch.rpm


pkgId: 9b85de0c57151b7be0814c34fef563f4741c7453f1f8e289f67cb9737b93706a
name: python3-iscsi-initiator-utils
arch: x86_64
version: 6.2.1.4
epoch: 0
release: 8.git095f59c.0.1.an8
summary: Python 3.6 bindings to iscsi-initiator-utils
url: http://www.open-iscsi.org
rpm_license: GPLv2+
rpm_vendor: OpenAnolis Community
rpm_group: Development/Libraries
rpm_buildhost: iZ2ze8vdmdyl66lfybi1hzZ
rpm_sourcerpm: iscsi-initiator-utils-6.2.1.4-8.git095f59c.0.1.an8.src.rpm
rpm_packager: OpenAnolis Community
checksum_type: sha256
description:
  The iscsi-initiator-utils-python3 package contains Python 3.6 bindings to the
  libiscsi interface for interacting with iscsi-initiator-utils

location_href:
  toplink/packages/iscsi-initiator-utils/6.2.1.4/8.git095f59c.0.1.an8/x86_64/python3-iscsi-initiator-utils-6.2.1.4-8.git095f59c.0.1.an8.x86_64.rpm


pkgId: 88684fcc049eab57edac57c78a5f95f7455cbb17ed8d48673fef891dd2569817
name: python3-itsdangerous
arch: noarch
version: 0.24
epoch: 0
release: 14.el8
summary: Python 3 library for passing trusted data to untrusted environments
url: http://pythonhosted.org/itsdangerous/
rpm_license: BSD
rpm_vendor: OpenAnolis Community
rpm_group: Unspecified
rpm_buildhost: anolis-build-01.openanolis.cn
rpm_sourcerpm: python-itsdangerous-0.24-14.el8.src.rpm
rpm_packager: OpenAnolis Community
location_href: toplink/packages/python-itsdangerous/0.24/14.el8/noarch/python3-itsdangerous-0.24-14.el8.noarch.rpm
checksum_type: sha256
description:
  Itsdangerous is a Python 3 library for passing data through untrusted
  environments (for example, HTTP cookies) while ensuring the data is not
  tampered with.

  Internally itsdangerous uses HMAC and SHA1 for signing by default and bases the
  implementation on the Django signing module. It also however supports JSON Web
  Signatures (JWS).


