# changelog

author: Peter Jones <pjones@redhat.com> - 0.5-3
changelog:
  - Temporarily don't require shim on i?86 - we've never built it there, and
    libfwup knows how to handle it not being there just fine.


author: Peter Jones <pjones@redhat.com> - 6-1
changelog:
  - Update to fwupdate 6
  - lots of build fixes for newer compilers and such
  - Use libsmbios on some systems to enable firmware updates (Mario Limonciello)
  - Use the correct reset type from the QueryCapsuleInfo data
  - Lots of fixes from auditing
  - Use efivar's error reporting infrastructure


author: Peter Jones <pjones@redhat.com> - 7-1
changelog:
  - Update to fwupdate 7
  - Fix the fix for ae7b85
  - fix one place where a second "rc" varibale is clobbering a result.


author: Peter Jones <pjones@redhat.com> - 8-1
changelog:
  - Update to fwupdate 8
  - Fix some i686 build errors
  - Be less stupid about SONAMEs so in the future we'll only have to rebuild
    dependent things on actual ABI changes.
  - Only depend on libsmbios on x86, for now, because it hasn't been ported to
    Aarch64.


author: Peter Jones <pjones@redhat.com> - 10-0.2
changelog:
  - Update for version 10
  - test release for ux capsule support; to enable UX capsules define
    LIBFWUP_ADD_UX_CAPSULE=1 in your environment.


author: Peter Jones <pjones@redhat.com> - 10-1
changelog:
  - Update to the final released version 10.
  - Make everything under /boot/efi be mode 0700, since that's what FAT will
    show anyway.


author: Charles R. Anderson <cra@wpi.edu> - 2008_10_13-10
changelog:
  - Patch to apply CFLAGS/LDFLAGS to final link so RPM_OPT_FLAGS are picked up (rhbz#1548426)
  - Use CC=gcc explicitly
  - Regenerate fxload-noa3load.patch


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.1.4-7
changelog:
  - Revert previous change of adding 'awk*' symlinks for info pages (bug #1486924)
  - Added patch to correctly fix the info pages issue (bug #1486924)
  - specfile content refactored for better readability
  - Package now provides its ABI version via gawk(abi)
  - Added test for usage of correct gawk(abi) into %check section


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.2.0-1
changelog:
  - Update to latest stable release from upstream [new API version - 2.0]
  - Added latest relevant patches from upstream's gawk-4.2-stable branch


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.2.0-2
changelog:
  - 'noarch' removed from *-devel subpackage
  - added arch requirement for *-devel subpackage
  - updated the build process to use %make_build macro


author: Andrew Price <anprice@redhat.com> - 3.2.0-2
changelog:
  - fsck.gfs2: Don't check fs formats we don't recognise
  - libgfs2: Fix pointer cast byte order issue
    Resolves: rhbz#1622050


author: Andrew Price <anprice@redhat.com> - 3.2.0-9
changelog:
  - gfs2_jadd: Handle out-of-space issues
  - gfs2_jadd: error handling overhaul
    Resolves: rhbz#1833141
  - gfs2.5: Update some mentions of gfs2_tool
    Resolves: rhbz#1818983


author: Andrew Price <anprice@redhat.com> - 3.2.0-11
changelog:
  - gfs2_jadd: Use fallocate to preallocate journals
  - gfs2_jadd: Don't fsync after each block written
    Resolves: rhbz#1942434


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-10
changelog:
  - Fix CVE-2021-27218
    Resolves: #1939072
  - Fix CVE-2021-27219
    Resolves: #1939108
  - Fix CVE-2021-28153
    Resolves: #1939118


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-13
changelog:
  - Rename and consolidate existing patches for better maintainability
  - Refresh CVE-2021-27219 patcheset, using better-targeted fixes
    Resolves: #1939108


author: Siddhesh Poyarekar <siddhesh@redhat.com> - 2.28-164.2
changelog:
  - CVE-2022-23218, CVE-2022-23219: Fix buffer overflows in sunrpc clnt_create
    for "unix" and svcunix_create (#2045062).


author: Carlos O'Donell <carlos@systemhalted.org> - 2.26-1
changelog:
  - Update to released glibc 2.26.
  - Auto-sync with upstream master,
    commit 2aad4b04ad7b17a2e6b0e66d2cb4bc559376617b.
  - getaddrinfo: Release resolver context on error in gethosts (swbz#21885)


author: Florian Weimer <fweimer@redhat.com> - 2.26-2
changelog:
  - Disable multi-arch (IFUNC string functions) on i686 (#1471427)
  - Remove nosegneg 32-bit Xen PV support libraries (#1482027)
  - Adjust spec file to RPM changes


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-3
changelog:
  - Auto-sync with upstream master,
    commit 403143e1df85dadd374f304bd891be0cd7573e3b:
  - x86-64: Align L(SP_RANGE)/L(SP_INF_0) to 8 bytes (swbz#21955)
  - powerpc: Add values from Linux 4.8 to <elf.h>
  - S390: Add new s390 platform z14.
  - Various locale fixes (swbz#14925, swbz#20008, swbz#20482, swbz#12349
    swbz#19982, swbz#20756, swbz#20756, swbz#21836, swbz#17563, swbz#16905,
    swbz#21920, swbz#21854)
  - NSS: Replace exported NSS lookup functions with stubs (swbz#21962)
  - i386: Do not set internal_function
  - assert: Suppress pedantic warning caused by statement expression (swbz#21242)
  - powerpc: Restrict xssqrtqp operands to Vector Registers (swbz#21941)
  - sys/ptrace.h: remove obsolete PTRACE_SEIZE_DEVEL constant (swbz#21928)
  - Remove __qaddr_t, __long_double_t
  - Fix uc_* namespace (swbz#21457)
  - nss: Call __resolv_context_put before early return in get*_r (swbz#21932)
  - aarch64: Optimized memcpy for Qualcomm Falkor processor
  - manual: Document getcontext uc_stack value on Linux (swbz#759)
  - i386: Add <startup.h> (swbz#21913)
  - Don't use IFUNC resolver for longjmp or system in libpthread (swbz#21041)
  - Fix XPG4.2 bits/sigaction.h namespace (swbz#21899)
  - x86-64: Add FMA multiarch functions to libm
  - i386: Support static PIE in start.S
  - Compile tst-prelink.c without PIE (swbz#21815)
  - x86-64: Use _dl_runtime_resolve_opt only with AVX512F (swbz#21871)
  - x86: Remove __memset_zero_constant_len_parameter (swbz#21790)


author: Tomasz Kłoczko <kloczek@fedoraproject.org> - 2.26-4
changelog:
  - Remove 'Buildroot' tag, 'Group' tag, and '%clean' section, and don't
    remove the buildroot in '%install', all per Fedora Packaging Guidelines
    (#1476839)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-5
changelog:
  - Auto-sync with upstream master,
    commit 2585d7b839559e665d5723734862fbe62264b25d:
  - Do not use generic selection in C++ mode
  - Do not use __builtin_types_compatible_p in C++ mode (#1481205)
  - x86-64: Check FMA_Usable in ifunc-mathvec-avx2.h (swbz#21966)
  - Various locale fixes (swbz#21750, swbz#21960, swbz#21959, swbz#19852)
  - Fix sigval namespace (swbz#21944)
  - x86-64: Optimize e_expf with FMA (swbz#21912)
  - Adjust glibc-rh827510.patch.


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-6
changelog:
  - Auto-sync with upstream master,
    commit b5889d25e9bf944a89fdd7bcabf3b6c6f6bb6f7c:
  - assert: Support types without operator== (int) (#1483005)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-8
changelog:
  - Auto-sync with upstream master,
    commit a8410a5fc9305c316633a5a3033f3927b759be35:
  - Obsolete matherr, _LIB_VERSION, libieee.a.


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-10
changelog:
  - Use an architecture-independent system call list (#1484729)
  - Drop glibc-fedora-include-bits-ldbl.patch (#1482105)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-11
changelog:
  - Auto-sync with upstream master,
    commit 3d7b66f66cb223e899a7ebc0f4c20f13e711c9e0:
  - string/stratcliff.c: Replace int with size_t (swbz#21982)
  - Fix tgmath.h handling of complex integers (swbz#21684)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-13
changelog:
  - Drop glibc-rh952799.patch, applied upstream (#952799, swbz#22025)
  - Auto-sync with upstream master,
    commit 5f9409b787c5758fc277f8d1baf7478b752b775d:
  - Various locale fixes (swbz#22022, swbz#22038, swbz#21951, swbz#13805,
    swbz#21971, swbz#21959)
  - MIPS/o32: Fix internal_syscall5/6/7 (swbz#21956)
  - AArch64: Fix procfs.h not to expose stdint.h types
  - iconv_open: Fix heap corruption on gconv_init failure (swbz#22026)
  - iconv: Mangle __btowc_fct even without __init_fct (swbz#22025)
  - Fix bits/math-finite.h _MSUF_ expansion namespace (swbz#22028)
  - Provide a C++ version of iszero that does not use __MATH_TG (swbz#21930)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-14
changelog:
  - Build glibc with -O2 (following the upstream default).
  - Auto-sync with upstream master,
    commit f4a6be2582b8dfe8adfa68da3dd8decf566b3983:
  - malloc: Abort on heap corruption, without a backtrace (swbz#21754)
  - getaddrinfo: Return EAI_NODATA for gethostbyname2_r with NO_DATA (swbz#21922)
  - getaddrinfo: Fix error handling in gethosts (swbz#21915) (swbz#21922)
  - Place $(elf-objpfx)sofini.os last (swbz#22051)
  - Various locale fixes (swbz#15332, swbz#22044)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-15
changelog:
  - Auto-sync with upstream master,
    commit b38042f51430974642616a60afbbf96fd0b98659:
  - Implement tmpfile with O_TMPFILE (swbz#21530)
  - Obsolete pow10 functions
  - math.h: Warn about an already-defined log macro


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-16
changelog:
  - Auto-sync with upstream master,
    commit 1e2bffd05c36a9be30d7092d6593a9e9aa009ada:
  - Add IBM858 charset (#1416405)
  - Update kernel version in syscall-names.list to 4.13
  - Add Linux 4.13 constants to bits/fcntl-linux.h
  - Add fcntl sealing interfaces from Linux 3.17 to bits/fcntl-linux.h
  - math: New generic powf, log2f, logf
  - Fix nearbyint arithmetic moved before feholdexcept (swbz#22225)
  - Mark __dso_handle as hidden (swbz#18822)
  - Skip PT_DYNAMIC segment with p_filesz == 0 (swbz#22101)
  - glob now matches dangling symbolic links (swbz#866, swbz#22183)
  - nscd: Release read lock after resetting timeout (swbz#22161)
  - Avoid __MATH_TG in C++ mode with -Os for fpclassify (swbz#22146)
  - Fix dlclose/exit race (swbz#22180)
  - x86: Add SSE4.1 trunc, truncf (swbz#20142)
  - Fix atexit/exit race (swbz#14333)
  - Use execveat syscall in fexecve (swbz#22134)
  - Enable unwind info in libc-start.c and backtrace.c
  - powerpc: Avoid misaligned stores in memset
  - powerpc: build some IFUNC math functions for libc and libm (swbz#21745)
  - Removed redundant data (LC_TIME and LC_MESSAGES) for niu_NZ (swbz#22023)
  - Fix LC_TELEPHONE for az_AZ (swbz#22112)
  - x86: Add MathVec_Prefer_No_AVX512 to cpu-features (swbz#21967)
  - x86: Add x86_64 to x86-64 HWCAP (swbz#22093)
  - Finish change from “Bengali” to “Bangla” (swbz#14925)
  - posix: fix glob bugs with long login names (swbz#1062)
  - posix: Fix getpwnam_r usage (swbz#1062)
  - posix: accept inode 0 is a valid inode number (swbz#19971)
  - Remove redundant LC_TIME data in om_KE (swbz#22100)
  - Remove remaining _HAVE_STRING_ARCH_* definitions (swbz#18858)
  - resolv: Fix memory leak with OOM during resolv.conf parsing (swbz#22095)
  - Add miq_NI locale for Miskito (swbz#20498)
  - Fix bits/math-finite.h exp10 condition (swbz#22082)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-17
changelog:
  - Move nss_compat to the main glibc package (#1400538)
  - Auto-sync with upstream master,
    commit 11c4f5010c58029e73e656d5df4f8f42c9b8e877:
  - crypt: Use NSPR header files in addition to NSS header files (#1489339)
  - math: Fix yn(n,0) without SVID wrapper (swbz#22244)
  - math: Fix log2(0) and log(10) in downward rounding (swbz#22243)
  - math: Add C++ versions of iscanonical for ldbl-96, ldbl-128ibm (swbz#22235)
  - powerpc: Optimize memrchr for power8
  - Hide various internal functions (swbz#18822)


author: Carlos O'Donell <carlos@systemhalted.org> - 2.26.90-18
changelog:
  - Auto-sync with upstream master,
    commit 1e26d35193efbb29239c710a4c46a64708643320.
  - malloc: Fix tcache leak after thread destruction (swbz#22111)
  - powerpc:  Fix IFUNC for memrchr.
  - aarch64: Optimized implementation of memmove for Qualcomm Falkor
  - Always do locking when iterating over list of streams (swbz#15142)
  - abort: Do not flush stdio streams (swbz#15436)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-19
changelog:
  - Move /var/db/Makefile to nss_db (#1498900)
  - Auto-sync with upstream branch master,
    commit 645ac9aaf89e3311949828546df6334322f48933:
  - openpty: use TIOCGPTPEER to open slave side fd


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-20
changelog:
  - Auto-sync with upstream branch master,
    commit d8425e116cdd954fea0c04c0f406179b5daebbb3:
  - nss_files performance issue in multi mode (swbz#22078)
  - Ensure C99 and C11 interfaces are available for C++ (swbz#21326)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-21
changelog:
  - Auto-sync with upstream branch master,
    commit 596f70134a8f11967c65c1d55a94a3a2718c731d:
  - Silence -O3 -Wall warning in malloc/hooks.c with GCC 7 (swbz#22052)
  - locale: No warning for non-symbolic character (swbz#22295)
  - locale: Allow "" int_curr_Symbol (swbz#22294)
  - locale: Fix localedef exit code (swbz#22292)
  - nptl: Preserve error in setxid thread broadcast in coredumps (swbz#22153)
  - powerpc: Avoid putting floating point values in memory (swbz#22189)
  - powerpc: Fix the carry bit on mpn_[add|sub]_n on POWER7 (swbz#22142)
  - Support profiling PIE (swbz#22284)


author: Florian Weimer <fweimer@redhat.com> - 2.26.90-22
changelog:
  - Auto-sync with upstream branch master,
    commit c38a4bfd596db2be2b9c1f96715bdc833eab760a:
  - malloc: Use compat_symbol_reference in libmcheck (swbz#22050)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-24
changelog:
  - Use make -O to serialize make output
  - Auto-sync with upstream branch master,
    commit 63b4baa44e8d22501c433c4093aa3310f91b6aa2:
  - sysconf: Fix missing definition of UIO_MAXIOV on Linux (#1504165)
  - Install correct bits/long-double.h for MIPS64 (swbz#22322)
  - malloc: Fix deadlock in _int_free consistency check
  - x86-64: Don't set GLRO(dl_platform) to NULL (swbz#22299)
  - math: Add _Float128 function aliases
  - locale: Add new locale mjw_IN (swbz#13994)
  - aarch64: Rewrite elf_machine_load_address using _DYNAMIC symbol
  - powerpc: fix check-before-set in SET_RESTORE_ROUND
  - locale: Use U+202F as thousands separators in pl_PL locale (swbz#16777)
  - math: Use __f128 to define FLT128_* constants in include/float.h for old GCC
  - malloc: Improve malloc initialization sequence (swbz#22159)
  - malloc: Use relaxed atomics for malloc have_fastchunks
  - locale: New locale ca_ES@valencia (swbz#2522)
  - math: Let signbit use the builtin in C++ mode with gcc < 6.x (swbz#22296)
  - locale: Place monetary symbol in el_GR, el_CY after the amount (swbz#22019)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-25
changelog:
  - Auto-sync with upstream branch master,
    commit 797ba44ba27521261f94cc521f1c2ca74f650147:
  - math: Add bits/floatn.h defines for more _FloatN / _FloatNx types
  - posix: Fix improper assert in Linux posix_spawn (swbz#22273)
  - x86-64: Use fxsave/xsave/xsavec in _dl_runtime_resolve (swbz#21265)
  - CVE-2017-15670: glob: Fix one-byte overflow (#1504807)
  - malloc: Add single-threaded path to _int_free
  - locale: Add new locale kab_DZ (swbz#18812)
  - locale: Add new locale shn_MM (swbz#13605)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-26
changelog:
  - Auto-sync with upstream branch master,
    commit 6b86036452b9ac47b4ee7789a50f2f37df7ecc4f:
  - CVE-2017-15804: glob: Fix buffer overflow during GLOB_TILDE unescaping
  - powerpc: Use latest string function optimization for internal function calls
  - math: No _Float128 support for ppc64le -mlong-double-64 (swbz#22402)
  - tpi_PG locale: Fix wrong d_fmt
  - aarch64: Disable lazy symbol binding of TLSDESC
  - tpi_PG locale: fix syntax error (swbz#22382)
  - i586: Use conditional branches in strcpy.S (swbz#22353)
  - ffsl, ffsll: Declare under __USE_MISC, not just __USE_GNU
  - csb_PL locale: Fix abmon/mon for March (swbz#19485)
  - locale: Various yesstr/nostr/yesexpr/noexpr fixes (swbz#15260, swbz#15261)
  - localedef: Add --no-warnings/--warnings option
  - powerpc: Replace lxvd2x/stxvd2x with lvx/stvx in P7's memcpy/memmove
  - locale: Use ASCII as much as possible in LC_MESSAGES
  - Add new locale yuw_PG (swbz#20952)
  - malloc: Add single-threaded path to malloc/realloc/calloc/memalloc
  - i386: Replace assembly versions of e_powf with generic e_powf.c
  - i386: Replace assembly versions of e_log2f with generic e_log2f.c
  - x86-64: Add powf with FMA
  - x86-64: Add logf with FMA
  - i386: Replace assembly versions of e_logf with generic e_logf.c
  - i386: Replace assembly versions of e_exp2f with generic e_exp2f.c
  - x86-64: Add exp2f with FMA
  - i386: Replace assembly versions of e_expf with generic e_expf.c


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-27
changelog:
  - Auto-sync with upstream branch master,
    commit f6e965ee94b37289f64ecd3253021541f7c214c3:
  - powerpc: AT_HWCAP2 bit PPC_FEATURE2_HTM_NO_SUSPEND
  - aarch64: Add HWCAP_DCPOP bit
  - ttyname, ttyname_r: Don't bail prematurely (swbz#22145)
  - signal: Optimize sigrelse implementation
  - inet: Check length of ifname in if_nametoindex (swbz#22442)
  - malloc: Account for all heaps in an arena in malloc_info (swbz#22439)
  - malloc: Add missing arena lock in malloc_info (swbz#22408)
  - malloc: Use __builtin_tgmath in tgmath.h with GCC 8 (swbz#21660)
  - locale: Replaced unicode sequences in the ASCII printable range
  - resolv: More precise checks in res_hnok, res_dnok (swbz#22409, swbz#22412)
  - resolv: ns_name_pton should report trailing \ as error (swbz#22413)
  - locale: mfe_MU, miq_NI, an_ES, kab_DZ, om_ET: Escape / in d_fmt (swbz#22403)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-28
changelog:
  - Auto-sync with upstream branch master,
    commit cccb6d4e87053ed63c74aee063fa84eb63ebf7b8:
  - sigwait can fail with EINTR (#1516394)
  - Add memfd_create function
  - resolv: Fix p_secstodate overflow handling (swbz#22463)
  - resolv: Obsolete p_secstodate
  - Avoid use of strlen in getlogin_r (swbz#22447)
  - lv_LV locale: fix collation (swbz#15537)
  - S390: Add cfi information for start routines in order to stop unwinding
  - aarch64: Optimized memset for falkor


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-29
changelog:
  - Enable -fstack-clash-protection (#1512531)
  - Auto-sync with upstream branch master,
    commit a55430cb0e261834ce7a4e118dd9e0f2b7fb14bc:
  - elf: Properly compute offsets of note descriptor and next note (swbz#22370)
  - cs_CZ locale: Base collation on iso14651_t1 (swbz#22336)
  - Implement the mlock2 function
  - Add _Float64x function aliases
  - elf: Consolidate link map sorting
  - pl_PL locale: Base collation on iso14651_t1 (swbz#22469)
  - nss: Export nscd hash function as __nss_hash (swbz#22459)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-30
changelog:
  - Add build dependency on bison
  - Auto-sync with upstream branch master,
    commit 7863a7118112fe502e8020a0db0fa74fef281f29:
  - math: New generic sinf (swbz#5997)
  - is_IS locale: Base collation on iso14651_t1 (swbz#22519)
  - intl: Improve reproducibility by using bison (swbz#22432)
  - sr_RS, bs_BA locales: make collation rules the same as for hr_HR (wbz#22534)
  - hr_HR locale: various updates (swbz#10580)
  - x86: Make a space in jmpbuf for shadow stack pointer
  - CVE-2017-17426: malloc: Fix integer overflow in tcache (swbz#22375)
  - locale: make forward accent sorting the default in collating (swbz#17750)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-31
changelog:
  - Add elision tunables.  Drop related configure flag.  (#1383986)
  - Auto-sync with upstream branch master,
    commit 37ac8e635a29810318f6d79902102e2e96b2b5bf:
  - Linux: Implement interfaces for memory protection keys
  - math: Add _Float64, _Float32x function aliases
  - math: Use sign as double for reduced case in sinf
  - math: fix sinf(NAN)
  - math: s_sinf.c: Replace floor with simple casts
  - et_EE locale: Base collation on iso14651_t1 (swbz#22517)
  - tr_TR locale: Base collation on iso14651_t1 (swbz#22527)
  - hr_HR locale: Avoid single code points for digraphs in LC_TIME (swbz#10580)
  - S390: Fix backtrace in vdso functions


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-32
changelog:
  - Obsolete the libcrypt-nss subpackage (#1525396)
  - armhfp: Disable -fstack-clash-protection due to GCC bug (#1522678)
  - ppc64: Disable power6 multilib due to GCC bug (#1522675)
  - Auto-sync with upstream branch master,
    commit 243b63337c2c02f30ec3a988ecc44bc0f6ffa0ad:
  - libio: Free backup area when it not required (swbz#22415)
  - math: Fix nextafter and nexttoward declaration (swbz#22593)
  - math: New generic cosf
  - powerpc: POWER8 memcpy optimization for cached memory
  - x86-64: Add sinf with FMA
  - x86-64: Remove sysdeps/x86_64/fpu/s_sinf.S
  - math: Fix ctanh (0 + i NaN), ctanh (0 + i Inf) (swbz#22568)
  - lt_LT locale: Base collation on copy "iso14651_t1" (swbz#22524)
  - math: Add _Float32 function aliases
  - math: Make cacosh (0 + iNaN) return NaN + i pi/2 (swbz#22561)
  - hsb_DE locale: Base collation on copy "iso14651_t1" (swbz#22515)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-34
changelog:
  - Auto-sync with upstream branch master,
    commit bad7a0c81f501fbbcc79af9eaa4b8254441c4a1f:
  - copy_file_range: New function to copy file data
  - nptl: Consolidate pthread_{timed,try}join{_np}
  - nptl: Implement pthread_self in libc.so (swbz#22635)
  - math: Provide a C++ version of iseqsig (swbz#22377)
  - elf: remove redundant __libc_enable_secure check from fillin_rpath
  - math: Avoid signed shift overflow in pow (swbz#21309)
  - x86: Add feature_1 to tcbhead_t (swbz#22563)
  - x86: Update cancel_jmp_buf to match __jmp_buf_tag (swbz#22563)
  - ld.so: Examine GLRO to detect inactive loader (swbz#20204)
  - nscd: Fix nscd readlink argument aliasing (swbz#22446)
  - elf: do not substitute dst in $LD_LIBRARY_PATH twice (swbz#22627)
  - ldconfig: set LC_COLLATE to C (swbz#22505)
  - math: New generic sincosf
  - powerpc: st{r,p}cpy optimization for aligned strings
  - CVE-2017-1000409: Count in expanded path in _dl_init_path (#1524867)
  - CVE-2017-1000408: Compute correct array size in _dl_init_paths (#1524867)
  - x86-64: Remove sysdeps/x86_64/fpu/s_cosf.S
  - aarch64: Improve strcmp unaligned performance


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-35
changelog:
  - Remove sln (#1531546)
  - Remove Sun RPC interfaces (#1531540)
  - Rebuild with newer GCC to fix pthread_exit stack unwinding issue (#1529549)
  - Auto-sync with upstream branch master,
    commit f1a844ac6389ea4e111afc019323ca982b5b027d:
  - CVE-2017-16997: elf: Check for empty tokens before DST expansion (#1526866)
  - i386: In makecontext, align the stack before calling exit (swbz#22667)
  - x86, armhfp: sync sys/ptrace.h with Linux 4.15 (swbz#22433)
  - elf: check for rpath emptiness before making a copy of it
  - elf: remove redundant is_path argument
  - elf: remove redundant code from is_dst
  - elf: remove redundant code from _dl_dst_substitute
  - scandir: fix wrong assumption about errno (swbz#17804)
  - Deprecate external use of libio.h and _G_config.h


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-36
changelog:
  - Auto-sync with upstream branch master,
    commit 579396ee082565ab5f42ff166a264891223b7b82:
  - nptl: Add test for callee-saved register restore in pthread_exit
  - getrlimit64: fix for 32-bit configurations with default version >= 2.2
  - elf: Add linux-4.15 VDSO hash for RISC-V
  - elf: Add RISC-V dynamic relocations to elf.h
  - powerpc: Fix error message during relocation overflow
  - prlimit: Replace old_rlimit RLIM64_INFINITY with RLIM_INFINITY (swbz#22678)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-38
changelog:
  - nptl: Fix stack guard size accounting (#1527887)
  - Remove invalid Obsoletes: on glibc-header provides
  - Require python3 instead of python during builds
  - Auto-sync with upstream branch master,
    commit 09085ede12fb9650f286bdcd805609ae69f80618:
  - math: ldbl-128ibm lrintl/lroundl missing "invalid" exceptions (swbz#22690)
  - x86-64: Add sincosf with vector FMA


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-39
changelog:
  - nptl: Open libgcc.so with RTLD_NOW during pthread_cancel (#1527887)
  - Introduce libnsl subpackage and remove NIS headers (#1531540)
  - Use versioned Obsoletes: for libcrypt-nss.
  - Auto-sync with upstream branch master,
    commit 08c6e95234c60a5c2f37532d1111acf084f39345:
  - nptl: Add tst-minstack-cancel, tst-minstack-exit (swbz#22636)
  - math: ldbl-128ibm log1pl (-qNaN) spurious "invalid" exception (swbz#22693)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-40
changelog:
  - libnsl: Do not install libnsl.so, libnsl.a (#1531540)
  - Use unversioned Supplements: for langpacks (#1490725)
  - Auto-sync with upstream branch master,
    commit 9a08a366a7e7ddffe62113a9ffe5e50605ea0924:
  - hu_HU locale: Avoid double space (swbz#22657)
  - math: Make default libc_feholdsetround_noex_ctx use __feholdexcept
    (swbz#22702)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-41
changelog:
  - CVE-2018-1000001: Make getcwd fail if it cannot obtain an absolute path
    (#1533837)
  - elf: Synchronize DF_1_* flags with binutils (#1439328)
  - Auto-sync with upstream branch master,
    commit 860b0240a5645edd6490161de3f8d1d1f2786025:
  - aarch64: fix static pie enabled libc when main is in a shared library
  - malloc: Ensure that the consolidated fast chunk has a sane size


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-43
changelog:
  - Enable static PIE support on i386, x86_64 (#1247050)
  - Remove add-on support (already gone upstream)
  - Rework test suite status reporting
  - Auto-sync with upstream branch master,
    commit 64f63cb4583ecc1ba16c7253aacc192b6d088511:
  - malloc: Fix integer overflows in memalign and malloc functions (swbz#22343)
  - x86-64: Properly align La_x86_64_retval to VEC_SIZE (swbz#22715)
  - aarch64: Update bits/hwcap.h for Linux 4.15
  - Add NT_ARM_SVE to elf.h


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-44
changelog:
  - Correct the list of static PIE architectures (#1247050)
  - glibc_post_upgrade: Remove process restart logic
  - glibc_post_upgrade: Integrate into the build process
  - glibc_post_upgrade: Do not clean up tls subdirectories
  - glibc_post_upgrade: Drop ia64 support
  - Remove architecture-specific symbolic link for iconvconfig
  - Auto-sync with upstream branch master,
    commit 4612268a0ad8e3409d8ce2314dd2dd8ee0af5269:
  - powerpc: Fix syscalls during early process initialization (swbz#22685)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-45
changelog:
  - Drop static PIE support on aarch64.  It leads to crashes at run time.
  - Remove glibc-rpcgen subpackage.  See rpcsvc-proto.  (#1531540)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-48
changelog:
  - Auto-sync with upstream branch master,
    commit 21c0696cdef617517de6e25711958c40455c554f:
  - locale: Implement alternative month names (swbz#10871)
  - locale: Change month names for pl_PL (swbz#10871)


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-50
changelog:
  - Auto-sync with upstream branch master,
    commit cdd14619a713ab41e26ba700add4880604324dbb:
  - libnsl: Turn remaining symbols into compat symbols (swbz#22701)
  - be_BY, be_BY@latin, lt_LT, el_CY, el_GR, ru_RU, ru_UA, uk_UA:
    Add alternative month names (swbz#10871)
  - x86: Revert Intel CET changes to __jmp_buf_tag (swbz#22743)
  - aarch64: Revert the change of the __reserved member of mcontext_t


author: Florian Weimer <fweimer@redhat.com> - 2.26.9000-51
changelog:
  - Explicitly run ldconfig in the buildroot
  - Do not run ldconfig from scriptlets
  - Put triggers into the glibc-common package, do not pass arguments to ldconfig


author: Richard W.M. Jones <rjones@redhat.com> - 2.26.9000-52
changelog:
  - Disable -fstack-clash-protection on riscv64:
    not supported even by GCC 7.3.1 on this architecture.


author: Carlos O'Donell <carlos@redhat.com> - 2.27-1
changelog:
  - Update to released glibc 2.27.
  - Auto-sync with upstream branch master,
    commit 23158b08a0908f381459f273a984c6fd328363cb.


author: Florian Weimer <fweimer@redhat.com> - 2.27-2.1
changelog:
  - Linux: use reserved name __key in pkey_get (#1542643)
  - Auto-sync with upstream branch release/2.27/master,
    commit 56170e064e2b21ce204f0817733e92f1730541ea.


author: Florian Weimer <fweimer@redhat.com> - 2.27-3
changelog:
  - Spec file cleanups:
    - Remove %defattr(-,root,root)
    - Use shell to run ldconfig %transfiletrigger
    - Move %transfiletrigger* to the glibc-common subpackage
    - Trim changelog
    - Include ChangeLog.old in the source RPM


author: Richard W.M. Jones <rjones@redhat.com> - 2.27-4
changelog:
  - riscv64: Add symlink from /usr/lib64/lp64d -> /usr/lib64 for ABI compat.
  - riscv64: Disable valgrind smoke test on this architecture.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-6
changelog:
  - Switch back to upstream master branch
  - Drop glibc-rh1013801.patch, applied upstream.
  - Drop glibc-fedora-nptl-linklibc.patch, no longer needed.
  - Auto-sync with upstream branch master,
    commit bd60ce86520b781ca24b99b2555e2ad389bbfeaa.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-7
changelog:
  - Auto-sync with upstream branch master,
    commit 1a2f44a848663036c8a14671fe0faa3fed0b2a25:
  - Remove spurios reference to libpthread_nonshared.a


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-13
changelog:
  - Auto-sync with upstream branch master,
    commit d39c0a459ef32a41daac4840859bf304d931adab:
  - CVE-2017-18269: memory corruption in i386 memmove (#1580934)


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-17
changelog:
  - Avoid exporting some Sun RPC symbols with default versions (#1577210)
  - Inherit the -mstackrealign flag if it is set
  - Inherit compiler flags in the original order
  - Auto-sync with upstream branch master,
    commit 89aacb513eb77549a29df2638913a0f8178cf3f5:
  - CVE-2018-11236: realpath: Fix path length overflow (#1581270, swbz#22786)


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-18
changelog:
  - Do not run telinit u on upgrades (#1579225)
  - Auto-sync with upstream branch master,
    commit 632a6cbe44cdd41dba7242887992cdca7b42922a.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-20
changelog:
  - Auto-sync with upstream branch master,
    commit 7f9f1ecb710eac4d65bb02785ddf288cac098323:
  - CVE-2018-11237: Buffer overflow in __mempcpy_avx512_no_vzeroupper (#1581275)
  - Drop glibc-rh1452750-allocate_once.patch,
    glibc-rh1452750-libidn2.patch.  Applied upstream.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-22
changelog:
  - Modernise nsswitch.conf defaults (#1581809)
  - Adjust build flags inheritence from redhat-rpm-config
  - Auto-sync with upstream branch master,
    commit 104502102c6fa322515ba0bb3c95c05c3185da7a.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-24
changelog:
  - Auto-sync with upstream branch master,
    commit 14beef7575099f6373f9a45b4656f1e3675f7372:
  - iconv: Make IBM273 equivalent to ISO-8859-1 (#1592270)


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-28
changelog:
  - Drop glibc-rh1315108.patch.  extend_alloca was removed upstream. (#1315108)
  - Auto-sync with upstream branch master,
    commit c49e18222e4c40f21586dabced8a49732d946917.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-29
changelog:
  - Drop glibc-deprecate_libcrypt.patch.  Variant applied upstream. (#1566464)
  - Drop glibc-linux-timespec-header-compat.patch.  Upstreamed.
  - Auto-sync with upstream branch master,
    commit e69d994a63afc2d367f286a2a7df28cbf710f0fe.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-30
changelog:
  - Auto-sync with upstream branch master,
    commit b7b88cea4151d85eafd7ababc2e4b7ae1daeedf5:
  - New locale: dsb_DE (Lower Sorbian)


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-36
changelog:
  - Auto-sync with upstream branch master,
    commit fd70af45528d59a00eb3190ef6706cb299488fcd:
  - Add the statx function
  - regexec: Fix off-by-one bug in weight comparison (#1582229)
  - nss_files: Fix re-reading of long lines (swbz#18991)
  - aarch64: add HWCAP_ATOMICS to HWCAP_IMPORTANT
  - aarch64: Remove HWCAP_CPUID from HWCAP_IMPORTANT
  - conform/conformtest.pl: Escape literal braces in regular expressions
  - x86: Use AVX_Fast_Unaligned_Load from Zen onwards.


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-38
changelog:
  - Auto-sync with upstream branch master,
    commit 93304f5f7a32f73b551266c5a181db51d97a71e4:
  - Install <bits/statx.h> header
  - Put the correct Unicode version number 11.0.0 into the generated files


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-41
changelog:
  - Build with --enable-cet on x86_64, i686
  - Auto-sync with upstream branch master,
    commit cfba5dbb10cc3abde632b46c60c10b2843917035:
  - Keep expected behaviour for [a-z] and [A-z] (#1607286)
  - Additional ucontext tests
  - Intel CET enhancements
  - ISO C11 threads support
  - Fix out-of-bounds access in IBM-1390 converter (swbz#23448)
  - New locale Yakut (Sakha) for Russia (sah_RU) (swbz#22241)
  - os_RU: Add alternative month names (swbz#23140)
  - powerpc64: Always restore TOC on longjmp (swbz#21895)
  - dsb_DE locale: Fix syntax error and add tests (swbz#23208)
  - Improve performance of the generic strstr implementation
  - regcomp: Fix off-by-one bug in build_equiv_class (swbz#23396)
  - Fix out of bounds access in findidxwc (swbz#23442)


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-42
changelog:
  - Auto-sync with upstream branch master,
    commit af86087f02a5522d8801a11d8381e04f95e33162:
  - x86/CET: Don't parse beyond the note end
  - Fix Linux fcntl OFD locks tests on unsupported kernels
  - x86: Populate COMMON_CPUID_INDEX_80000001 for Intel CPUs (swbz#23459)
  - x86: Correct index_cpu_LZCNT (swbz#23456)
  - Fix string/tst-xbzero-opt if build with gcc head


author: Florian Weimer <fweimer@redhat.com> - 2.27.9000-43
changelog:
  - Update to glibc 2.28 release tarball:
  - Translation updates
  - x86/CET: Fix property note parser (swbz#23467)
  - x86: Add tst-get-cpu-features-static to $(tests) (swbz#23458)


author: Patsy Griffin Franklin <patsy@redhat.com> - 2.28-48
changelog:
  - Add compiler barriers around modifications of the robust mutex list
    for pthread_mutex_trylock. (#1672773)


author: Florian Weimer <fweimer@redhat.com> - 2.28-65
changelog:
  - glibc-all-langpacks: Do not delete locale archive during update (#1717347)
  - Do not mark /usr/lib/locale/locale-archive as a configuration file
    because it is always automatically overwritten by build-locale-archive.


author: Arjun Shankar <arjun@redhat.com> - 2.28-79
changelog:
  - Remove unwanted whitespace from size lines and account for top chunk in
    malloc_info output (#1735747)


author: Arjun Shankar <arjun@redhat.com> - 2.28-80
changelog:
  - Fix race condition in tst-clone3 and add a new ldconfig test,
    tst-ldconfig-bad-aux-cache (#1764226)


author: Patsy Griffin <patsy@redhat.com> - 2.28-114
changelog:
  - CVE-2020-10029: Prevent stack corruption from crafted input in cosl, sinl,
    sincosl, and tanl function. (#1811796)


author: Patsy Griffin <patsy@redhat.com> - 2.28-130
changelog:
  - Fix avx2 strncmp offset compare condition check (#1871394)
  - Add strncmp and strcmp testcases for page boundary


author: Carlos O'Donell <carlos@redhat.com> - 2.28-153
changelog:
  - Support SEM_STAT_ANY via semctl. Return EINVAL for unknown commands to semctl,
    msgctl, and shmctl. (#1912670)


author: Milind Changire <mchangir@redhat.com> - 6.0-1
changelog:
  - rebase to upstream glusterfs at v6.0
  - fixes bugs bz#1493284 bz#1578703 bz#1600918 bz#1670415 bz#1691620 
    bz#1693935 bz#1695057


author: Milind Changire <mchangir@redhat.com> - 6.0-2
changelog:
  - fixes bugs bz#1471742 bz#1652461 bz#1671862 bz#1676495 bz#1691620 
    bz#1696334 bz#1696903 bz#1697820 bz#1698436 bz#1698728 bz#1699709 bz#1699835 
    bz#1702240


author: Rinku Kothiya <rkothiya@redhat.com> - 6.0-3
changelog:
  - fixes bugs bz#1583585 bz#1671862 bz#1702686 bz#1703434 bz#1703753 
    bz#1703897 bz#1704562 bz#1704769 bz#1704851 bz#1706683 bz#1706776 bz#1706893


author: Rinku Kothiya <rkothiya@redhat.com> - 6.0-4
changelog:
  - fixes bugs bz#1480907 bz#1702298 bz#1703455 bz#1704181 bz#1707246
    bz#1708067 bz#1708116 bz#1708121 bz#1709087 bz#1711249 bz#1711296 
    bz#1714078 bz#1714124 bz#1716385 bz#1716626 bz#1716821 bz#1716865 bz#1717927


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-5
changelog:
  - fixes bugs bz#1573077 bz#1694595 bz#1703434 bz#1714536 bz#1714588 
    bz#1715407 bz#1715438 bz#1705018


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-6
changelog:
  - fixes bugs bz#1668001 bz#1708043 bz#1708183 bz#1710701 
    bz#1719640 bz#1720079 bz#1720248 bz#1720318 bz#1720461


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-7
changelog:
  - fixes bugs bz#1573077 bz#1600918 bz#1703423 bz#1704207 bz#1708064
    bz#1709301 bz#1713664 bz#1716760 bz#1717784 bz#1720163 bz#1720192
    bz#1720551 bz#1721351 bz#1721357 bz#1721477 bz#1722131 bz#1722331
    bz#1722509 bz#1722801 bz#1720248


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-8
changelog:
  - fixes bugs bz#1698435 bz#1712591 bz#1715447 bz#1720488 bz#1722209
    bz#1722512 bz#1724089 bz#1726991 bz#1727785 bz#1729108


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-12
changelog:
  - fixes bugs bz#1730914 bz#1731448 bz#1732770 bz#1732792 bz#1733531 
    bz#1734305 bz#1734534 bz#1734734 bz#1735514 bz#1737705 bz#1732774
    bz#1732793


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-14
changelog:
  - fixes bugs bz#1719171 bz#1728673 bz#1731896 bz#1732443 bz#1733970 
    bz#1745107 bz#1746027 bz#1748688 bz#1750241 bz#1572163


author: Rinku Kothiya <rkothiya@redhat.com> - 6.0-23
changelog:
  - fixes bugs bz#1344758 bz#1599802 bz#1685406 bz#1686800 bz#1724021 
    bz#1726058 bz#1727755 bz#1731513 bz#1741193 bz#1758923 bz#1761326 bz#1761486 
    bz#1762180 bz#1764095 bz#1766640


author: Rinku Kothiya <rkothiya@redhat.com> - 6.0-38
changelog:
  - fixes bugs bz#1234220 bz#1286171 bz#1487177 bz#1524457 bz#1640573 
    bz#1663557 bz#1667954 bz#1683602 bz#1686897 bz#1721355 bz#1748865 bz#1750211 
    bz#1754391 bz#1759875 bz#1761531 bz#1761932 bz#1763124 bz#1763129 bz#1764091 
    bz#1775637 bz#1776901 bz#1781550 bz#1781649 bz#1781710 bz#1783232 bz#1784211 
    bz#1784415 bz#1786516 bz#1786681 bz#1787294 bz#1787310 bz#1787331 bz#1787994 
    bz#1790336 bz#1792873 bz#1794663 bz#1796814 bz#1804164 bz#1810924 bz#1815434 
    bz#1836099 bz#1837467 bz#1837926 bz#1838479 bz#1839137 bz#1844359


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-50
changelog:
  - fixes bugs bz#1224906 bz#1412494 bz#1612973 bz#1663821 bz#1691320 
    bz#1726673 bz#1749304 bz#1752739 bz#1779238 bz#1813866 bz#1814744 bz#1821599 
    bz#1832306 bz#1835229 bz#1842449 bz#1865796 bz#1878077 bz#1882923 bz#1885966 
    bz#1890506 bz#1896425 bz#1898776 bz#1898777 bz#1898778 bz#1898781 bz#1898784 
    bz#1903468


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-57
changelog:
  - fixes bugs bz#1600379 bz#1689375 bz#1782428 bz#1798897 bz#1815462 
    bz#1889966 bz#1891403 bz#1901468 bz#1903911 bz#1908635 bz#1917488 bz#1918018 
    bz#1919132 bz#1925425 bz#1927411 bz#1927640 bz#1928676 bz#1942816 bz#1943467 
    bz#1945143 bz#1946171 bz#1957191 bz#1957641


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-60
changelog:
  - fixes bugs bz#1668303 bz#1853631 bz#1901468 bz#1904137 bz#1911665 
    bz#1962972 bz#1973566 bz#1994593 bz#1995029 bz#1997447 bz#2006205


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 1:6.1.2-3
changelog:
  - Build process updated to correctly build .debug_info for i386
    and to correctly use hardening flags


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 1:6.1.2-8
changelog:
  - Missing fipschecks added into build process (bug #1553679)
  - --enable-fat option added to %configure (bug #1493218)


author: Jakub Martisko <jamartis@redhat.com> - 1:6.1.2-9
changelog:
  - Add support for intel CET and -fcf-protection
  - Add missing compiler/linker flags
  Related: #1630567


author: Daiki Ueno <dueno@redhat.com> - 3.6.14-7
changelog:
  - Increase DH key bits to >= 2048 in self-tests (#1879506)
  - Implement self-tests for KDF and CMAC (#1890870)
  - Fix CVE-2020-24659: heap buffer-overflow when "no_renegotiation" alert is received (#1873959)


author: Daiki Ueno <dueno@redhat.com> - 3.6.16-1
changelog:
  - Update to upstream 3.6.16 release (#1956783)
  - Fix potential use-after-free in key_share handling (#1927597)
  - Fix potential use-after-free in pre_shared_key handling (#1927593)
  - Stop gnutls-serv relying on AI_ADDRCONFIG to decide listening address (#1908334)
  - Fix cert expiration issue in tests (#1908110)


author: Kalev Lember <klember@redhat.com> - 1.55.2-1
changelog:
  - Update to 1.55.2
  - Drop /usr/bin/env shebang patch as the brp scripts now handle this correctly
  - Remove ldconfig scriptlets


author: Jiri Kucera <jkucera@redhat.com> - 1.13.1-8
changelog:
  - Add LICENSES file into the tarball, update License field
    Add pkgconfig files to gpgme-devel
    Resolves: #1882423, #1953905


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-98
changelog:
  - Fix another batch of CVEs
    Resolves: CVE-2020-14372
    Resolves: CVE-2020-25632
    Resolves: CVE-2020-25647
    Resolves: CVE-2020-27749
    Resolves: CVE-2020-27779
    Resolves: CVE-2021-20225
    Resolves: CVE-2021-20233


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-99
changelog:
  - Fix bug of grub2-install not checking for the SBAT option
    Resolves: CVE-2020-14372
    Resolves: CVE-2020-25632
    Resolves: CVE-2020-25647
    Resolves: CVE-2020-27749
    Resolves: CVE-2020-27779
    Resolves: CVE-2021-20225
    Resolves: CVE-2021-20233


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-37
changelog:
  - grubby-bls: unset default entry if is the one being removed
    Resolves: rhbz#1668329
  - grubby-bls: error if args or remove-args is used without update-kernel
    Related: rhbz#1690765
  - grubby-bls: make --update-kernel ALL to update kernelopts var in grubenv
    Resolves: rhbz#1690765
  - grubby-bls: fix --add-kernel not working when using the --args option
    Related: rhbz#1690765


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-38
changelog:
  - grubby-bls: don't print rpm-sort error messages
    Resolves: rhbz#1731924
  - grubby-bls: remove -o option and support -c for ppc64le grub config
    Resolves: rhbz#1758598
  - grubby-bls: fix logic to check if the kernelopts var is defined in a BLS
    Resolves: rhbz#1726514
  - grubby-bls: don't update grubenv when generating grub.cfg for ppc64le
    Related: rhbz#1726514


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-39
changelog:
  - grubby-bls: strip only /boot from paths
    Resolves: rhbz#1738238
  - Make grubby to also update GRUB_CMDLINE_LINUX in /etc/default/grub
    Resolves: rhbz#1152027
  - grubby-bls: fix corner case when a kernel param value contains a '='
    Resolves: rhbz#1787584
  - grubby-bls: update man page to match options in current wrapper script
    Resolves: rhbz#1812065
  - grubby-bls: always escape the delimiter character used in sed commands
    Related: rhbz#1787584
  - grubby-bls: add a --no-etc-grub-update option
    Related: rhbz#1152027


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added /usr/bin/gzip and /usr/bin/gunzip symlinks as some programs are too
    brain dead to figure out they should be at least trying to use $PATH
  - added BuildRoot


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - adopt patch from Paul Eggert to fix detection of the improper tables in
    inflate.c(huft_build)
  - the latest released version 1.2.4a, which provides documentation updates
    only. But it lets us use small revision numbers again
  - add an dirinfo entry for gzip.info so we can get rid of the ugly --entry
    args to install-info


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Build system handles stripping
  - Don't do thing the system does, like creating directories
  - use --bindir /bin
  - Added URL
  - skip unnecesarry sed step
  - Include THANKS, AUTHORS, ChangeLog, TODO


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add HAVE_LSTAT define, to avoid it doing weird things to symlinks
    instead of ignoring them as the docs say it should (#22045)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed buzilla bug #26680. Wrong skip value after mktemp patch and forced
    overwrite for output file during decompression.


author: Trond Eivind Glomsrød <teg@redhat.com> 1.3.0-16
changelog:
  - replace tempfile patches with improved ones solar@openwall.com
  - Add less to the dependency chain - zless needs it


author: Jeff Johnson <jbj@redhat.com> 1.3.3-9
changelog:
  - enlarge window buffer to avoid accessing beyond end-of-buffer (#78413,#83095).
  - re-enable rsync ready patch.


author: Tomas Mraz <tmraz@redhat.com> 1.3.5-2
changelog:
  - upstream 1.3.5
  - dropped long ago obsolete dirinfo patch
  - escape file names in zgrep (#123012)
  - make stack in match.S nonexecutable


author: Tomas Mraz <tmraz@redhat.com> 1.3.5-3
changelog:
  - don't use the asm code again as it's slower than the gcc compiled one
  - convert the .spec to UTF-8


author: Ivana Varekova <varekova@redhat.com> 1.3.5-8
changelog:
  - fix bug 204676 (patches by Tavis Ormandy)
    - cve-2006-4334 - null dereference problem
    - cve-2006-4335 - buffer overflow problem
    - cve-2006-4336 - buffer underflow problem
    - cve-2006-4338 - infinite loop problem
    - cve-2006-4337 - buffer overflow problem


author: Karel Klic <kklic@redhat.com> - 1.3.13-1
changelog:
  - New upstream version
  - Updated license from GPLv2 to GPLv3+
  - Removed gzip-1.3.12-futimens.patch, as it is fixed in the new version
  - Updated rsync patch to the new upstream version
  - Updated cve-2006-4337 patch to use gzip_error instead of error


author: Karel Klic <kklic@redhat.com> - 1.4-1
changelog:
  - New upstream release
  - Use XZ upstream source archive
  - Removed cve-2010-0001 patch as it's fixed in this release
  - Removed zdiff patch as it's fixed in this release


author: Karel Klic <kklic@redhat.com> - 1.4-2
changelog:
  - Removed the dependency on less (rhbz#629580)
  - Removed the BuildRoot tag
  - Removed the %clean section


author: Michal Luscon <mluscon@redhat.com> 1.5-1
changelog:
  - New upstream version
  - Removed gzip-1.3.9-stderr.patch
  - Removed gzip-1.3.10-zgreppipe.patch
  - Removed gzip-1.3.13-noemptysuffix.patch


author: Petr Stodulka <pstodulk@redhat.com> - 1.6-6
changelog:
  - changed spec file - build section
    obey compiler macros %__cc, %__cpp, %__cxx (#667144)
  - zgrep inherits color setup from grep (#1034839)


author: Petr Stodulka <pstodulk@redhat.com> - 1.7-1
changelog:
  - rebase to new upstream version 1.7
  - dropped all patches (almost all issues are fixed in new upstream version,
    sometimes in different way)
    - only patch gzip-1.3.12-openbsd-owl-tmp.patch is untested - code is changed
      significantly and patch is undocumented from archaic time, so I drop it too
    Resolves: #1321560


author: Jakub Martisko <jamartis@redhat.com> - 1.9-5
changelog:
  - Fix wrong skip size in gzexe
  - Add new test dealing with the ^^ (needs autoreconf)
  - Enable make check (needs less)
    Resolves: 1705413

   * Tue Aug 07 2018 Jakub Martisko <jamartis@redhat.com> - 1.9-4
   - Fix FTBFS bug (gnulib problems)
   - more details: https://lists.gnu.org/r/bug-gnulib/2018-03/msg00000.html
     Resolves 1611722


author: Francisco Javier Tsao Santín <tsao@gpul.org> - 1:1.3-1
changelog:
  - Patch by Todd Lewis that adds option -x to exclude files with pcre lib 
  - This patch solves RH Bugzilla ID's 955246 1322198


author: Tomasz Kłoczko <kloczek@fedoraproject.org> - 1:1.3-4
changelog:
  - remove manually added pcre2 requires (this is autogenerated)
  - removed BuildRoot, %defattr() and Group (new Fedora Packaging Guildline)
  - do not use straight gcc and add use %{__global_ldflags}
  - use %_licensedir is no longer needed
  - minor cleanups:
  -- reformat %description to 80 col
  -- added full URLs in Source fields
  -- more macros
  -- a bit simpler %prep


author: Michal Grzedzicki <mge@fb.com> - 9.54-4
changelog:
  - backport fix for --dco-identify real max sectors calculation from upstream version 9.62 (#1959918)


author: Mike A. Harris <mharris@redhat.com> 0.30-1
changelog:
  - Reconfigured Cards database to default to XFree86 4.x for ALL video
    hardware, since 3.3.6 support is being removed.  Video cards not
    supported natively by 4.x will be changed to use the vesa or vga
    driver, or completely removed as unsupported.


author: Mike A. Harris <mharris@redhat.com> 0.31-1
changelog:
  - Modified ATI entries in pcitable to be able to autodetect the FireGL 8700
    and FireGL 8800 which both have the same ID, but different subdevice ID's.
    Added entries to Cards database for the 8700/8800 as well.


author: Bill Nottingham <notting@redhat.com> 0.33-1
changelog:
  - Eizo monitor updates (#56080, <triad@df.lth.se>)
  - pci.ids updates, corresponding pcitable updates
  - pcilint for pcitable


author: Mike A. Harris <mharris@redhat.com> 0.35-1
changelog:
  - Updated Cards db for CT69000
  - Various ATI cleanups and additions to Cards and pcitable
  - Updated S3 Trio3D to default to "vesa" driver (#59956)


author: Mike A. Harris <mharris@redhat.com> 0.37-1
changelog:
  - Changed Matrox G450 driver default options to fix bug (#66697)
  - Corrected S3 Trio64V2 bug in Cards file (#66492)


author: Bill Nottingham <notting@redhat.com> 0.44-1
changelog:
  - fix some of the Dell entries
  - add cardbus controller id (#71198)
  - add audigy mapping
  - add NEC monitor (#71320)


author: Bill Nottingham <notting@redhat.com> 0.61-1
changelog:
  - move pcmcia config file here
  - sort MonitorsDB, add some entries, remove dups
  - switch some network driver mappings


author: Mike A. Harris <mharris@redhat.com>
changelog:
  - Complete reconstruction of all Neomagic hardware entries in Cards
    database to reflect current XFree86, as well as pcitable update,
    and submitted cleaned up entries to sourceforge


author: Mike A. Harris <mharris@redhat.com> 0.65-1
changelog:
  - Added Card:S3 Trio64V2 (Unsupported RAMDAC) entry to pcitable, pci.ids, and
    Cards database to default this particular variant to "vesa" driver (#81659)


author: Mike A. Harris <mharris@redhat.com> 0.68-1
changelog:
  - Massive update of all ATI video hardware PCI IDs in pcitable and a fair
    number of additions and corrections to the Cards database as well


author: Mike A. Harris <mharris@redhat.com> 0.73-1
changelog:
  - Updated pcitable and Cards database to fix Savage entries up a bit, and
    change default Savage/MX driver to 'vesa' as it is hosed and with no sign
    of working in time for 4.3.0.  Fixes (#72476,80278,80346,80423,82394)


author: Mike A. Harris <mharris@redhat.com> 0.88-1
changelog:
  - Update MonitorsDB for new IBM monitors from upstream XFree86 bugzilla:
    http://bugs.xfree86.org/cgi-bin/bugzilla/show_bug.cgi?id=459


author: Mike A. Harris <mharris@redhat.com> 0.99-1
changelog:
  - Added entries for Radeon 9600/9600Pro/9800Pro to Cards
  - Fixed minor glitch in pcitable for Radeon 9500 Pro


author: Bill Nottingham <notting@redhat.com> 0.105-1
changelog:
  - many monitor updates (#114260, #114216, #113993, #113932, #113782,
    - add some PCMCIA cards (#113006, #112505)


author: Mike A. Harris <mharris@redhat.com> 0.110-1
changelog:
  - Added 3Dfx Voodoo Graphics and Voodoo II entries to the Cards database, both
    pointing to Alan Cox's new "voodoo" driver which is now included in XFree86
    4.3.0-62 and later builds in Fedora development.  Mapped their PCI IDs to
    the new Cards entry in pcitable.
  - Updated the entries for 3Dfx Banshee


author: Bill Nottingham <notting@redhat.com> 0.116-1
changelog:
  - move updfstab.conf here
  - add wireless card (#116865)
  - add laptop display panel (#117385)
  - add clipdrive (#119928)
  - add travelling disk (#119143)
  - add NEXDISK (#106782)


author: Bill Nottingham <notting@redhat.com> - 0.120-1
changelog:
  - mainly:
    fix upgradelist module for CMPci cards (#123647)
  - also:
    add another wireless card (#122676)
    add wireless card (#122625)
    add 1280x800 (#121548)
    add 1680x1050 (#121148)
    add IntelligentStick (#124313)


author: Mike A. Harris <mharris@redhat.com> 0.151-1
changelog:
  - Added one hundred billion new nvidia PCI IDs to pcitable and Cards to
    synchronize it with X.Org X11 6.8.2.  (#140601)


author: Bill Nottingham <notting@redhat.com> 0.152-1
changelog:
  - fix qlogic driver mappings, add upgradelist mappings for the modules
    that changed names (#150621)


author: Bill Nottingham <notting@redhat.com> - 0.159-1
changelog:
  - pcitable: make branding happy (#160047)
  - Cards: add required blank line (#157972)
  - add some monitors
  - add JVC CD-ROM (#160907, <richard@rsk.demon.co.uk>)
  - add hisax stuff to blacklist (#154799, #159068)


author: Bill Nottingham <notting@redhat.com> - 0.160-1
changelog:
  - move blacklist to /etc/modprobe.d, require new module-init-tools
  - add LG monitors (#162466, #161734)
  - add orinoco card (#161696)
  - more mptfusion stuff (#107088)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - migrate mpt module names (#161420)
  - remove pcitable entries for drivers in modules.pcimap
  - switch lone remaining 'Server' entry - that can't work right


author: Jeremy Katz <katzj@redhat.com> - 0.171-1
changelog:
  - r128 -> ati.  should fix the unresolved symbol and kem says its more 
    generally the "right" thing to do


author: Adam Jackson <ajackson@redhat.com> - 0.181-1
changelog:
  - Updated videodrivers to mention i945
  - New monitors: Sony CPD-G420 (#145902), Compaq P1110 (#155120).


author: Adam Jackson <ajackson@redhat.com> - 0.182-1
changelog:
  - Added ast driver description to videodrivers
  - Numerous Dell monitor additions (#196734)
  - Numerous Belinea monitor additions (#198087)


author: Phil Knirsch <pknirsch@redhat.com> - 0.183-1
changelog:
  - Updated pci.ids before FC6 final (#198994)
  - Added several missing Samsung monitors (#197463)
  - Included a new inf2mondb.py from Matt Domsch (#158723)


author: Karsten Hopp <karsten@redhat.com> 0.194-1
changelog:
  - Update to latest pci.ids/usb.ids for RHEL5
  - Resolves: #220182
    Add some Dell monitors to MonitorDB


author: Karsten Hopp <karsten@redhat.com> 0.205-1
changelog:
  - really update pci.ids, update-pciids downloaded an old file
  - disable iwl4965 blacklist as it is not approved yet (#245379)


author: Karsten Hopp <karsten@redhat.com> 0.207-1
changelog:
  - pull new upstream pci.ids and rebuild
  - Resolves: bz #251732
  - Resolves: bz #251734
  - Resolves: bz #252195
  - Resolves: bz #252196
  - Resolves: bz #241274


author: Karsten Hopp <karsten@redhat.com> 0.212-1
changelog:
  - pull new upstream pci.ids, usb.ids
  - Resolves: #300831
  - added HP TFT5600 LCD Monitor
  - Resolves: #250569
  - added Acer AL1916W, Eizo L568/L568D, Samsung 795DF
  - Resolves: #250582
  - Add Samsung 205BW/206BW/225BW/226BW
  - Resolves: #250584
  - Add Samsung 931BF
  - Resolves: #250587


author: Karsten Hopp <karsten@redhat.com> 0.217-1
changelog:
  - update pci.ids, oui.txt
  - update usb.ids, fixes #439963
  - add HP w1907 LCD monitor, fixes #431359
  - fix many monitor entries (Stanislav Ievlev, #430276)


author: Karsten Hopp <karsten@redhat.com> 0.220-1
changelog:
  - update pci.ids, usb.ids, oui.txt
  - MonitorsDB: add some Samsung monitors (Ronald Warsow)
  - MonitorsDB: add Dell E1609W (Matt Domsch)
  - MonitorsDB: add 7 Dell monitors (Matt Domsch)
  - MonitorsDB: add a bunch of Hyundai and ImageQuest monitors


author: Karsten Hopp <karsten@redhat.com> 0.220-1
changelog:
  - add new monitor entries from Mandriva hardware database (Thierry Vignaud)
  - make generic entries have properly formated frequencies (Thierry Vignaud)
  - remove duplicate Dell monitor entries (Thierry Vignaud)
  - more vendor name fixes
  - fix extra field in 'Compudyne KD-1500N' definition (Thierry Vignaud)
  - make Dell monitors case consistent (Thierry Vignaud)
  - make all GoldStar monitors have the same vendor name (Thierry Vignaud)
  - add URL of git repository
  - fix spacing (Thierry Vignaud)
  - sort MonitorDB file with LANG=C sort -f -t ";" -k1,2
  - add Samsung SyncMaster 2443BWX (Marc van den Dikkenberg)
  - add some Lenovo monitors (Im Sza)


author: Karsten Hopp <karsten@redhat.com> 0.223-1
changelog:
  - update usb.ids pci.ids oui.txt
  - rename /etc/modprobe.d/blacklist to /etc/modprobe.d/blacklist.conf


author: Karsten Hopp <karsten@redhat.com> 0.232-1
changelog:
  - update usb.ids, out.txt and pci.ids (#550020, #611860)
  - fix incorrect syntax doc/comment in blacklist.conf (Ville Skyttä, #532802)
  - add Acer B243HL and BenQ G2420HDBL (Ville Skyttä, #590787)
  - add HP LP2475w and Samsung 2494HM (Ville Skyttä, #595059)


author: Karsten Hopp <karsten@redhat.com> 0.233-7
changelog:
  - bump release
  - update oui.txt URL
  - fix tarball name in spec file
  - update usb.ids, out.txt and pci.ids


author: Michal Minar <miminar@redhat.com> 0.247-1
changelog:
  - Moved blacklist.conf from /etc/modprobe.d to /usr/lib/modprobe.d.
  - Renamed it to dist-blacklist.conf.
  - Data files update


author: Honggang Li <honli@redhat.com> - 29.0-2
changelog:
  - Suppress ibdev2netdev warning messgae
  - Unversioned documentation directory
  - Resolves: bz1794904, bz1824853


author: Honggang Li <honli@redhat.com> - 32.0-1
changelog:
  - Update to upstream v32 release for features and fixes
  - Support Amazon Elastic Fabric Adapter
  - Enable pyverbs
  - Add a check for udevadm in the specfile
  - Resolves: bz1851721, bz1856076, bz1887396, bz1868804


author: Honggang Li <honli@redhat.com> - 32.0-4
changelog:
  - Update to upstream stable release v32.1
  - Fix mlx5 pyverbs CQ test
  - Resolves: bz1915745, bz1907377


author: Mike FABIAN <mfabian@redhat.com> - 60.2-4
changelog:
  - Add negative-daylight-savings.patch from upstream.
    (see http://bugs.icu-project.org/trac/ticket/13566 and
    http://bugs.icu-project.org/trac/changeset/40954)


author: Parag Nemade <pnemade AT redhat DOT com> - 60.2-7
changelog:
  - Resolves:rh#1602551 - Fix specfile by adding compile options
  - also add BuildRequires for gcc and gcc-c++
  - Correct the upstream URL


author: Mike FABIAN <mfabian@redhat.com> - 60.3-1
changelog:
  - Update to 60.3 maintenance release including support for new Japanese era Reiwa (令和).
  - Resolves: rhbz#1677093


author: Mike FABIAN <mfabian@redhat.com> - 60.3-2
changelog:
  - Apply ICU-13634-Adding-integer-overflow-logic-to-ICU4C-num.patch
  - Apply ICU-20958-Prevent-SEGV_MAPERR-in-append.patch
  - Resolves: rhbz#1808238


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.4-2
changelog:
  - Fix broken reference following when the reference is split to
    more than one line
  - Fix possible incorrect selection of already loaded file when
    following cross reference
    Resolves: #1383057


author: Petr Pisar <ppisar@redhat.com> - 6.4-3
changelog:
  - perl dependency renamed to perl-interpreter
    <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>


author: Jan Macku <jamacku@redhat.com> - 10.00.7-1
changelog:
  - Wait for scope link addresses as well as for scope global addresses
  - Remove deprecated option -m of pidof


author: Jan Macku <jamacku@redhat.com> - 10.00.8-1
changelog:
  - rwtab: Add support for chrony
  - ifup-eth: Switch to bc utility, which supports floating point computations.
  - Replace grep -EL with subshell since -L changed behaviour


author: Jan Macku <jamacku@redhat.com> - 10.00.10-1
changelog:
  - Allow updating rfkill switch status while in readonly root mode
  - service: Prevent variables from globbing
  - Allow updating mlocate.db while in readonly root mode


author: Charalampos Stratakis <cstratak@redhat.com> - 0.6-10
changelog:
  - SPEC file cleanup
  - Added licence tag
  - Removal of old and unneeded macros
  - Use of newest python macros
  - Removed Python 2 dependency
  - Added patch for Python 3 build


author: Andrea Claudi <aclaudi@redhat.com> [5.3.0-5.el8]
changelog:
  - man: tc-ct.8: Add manual page for ct tc action (Andrea Claudi) [1844637]
  - tc: flower: Add matching on conntrack info (Andrea Claudi) [1844637]
  - tc: Introduce tc ct action (Andrea Claudi) [1844637]
  - tc: add NLA_F_NESTED flag to all actions options nested block (Andrea Claudi) [1844637]
  - Import tc_act/tc_ct.h uapi file (Andrea Claudi) [1844637]
  - ss: allow dumping kTLS info (Andrea Claudi) [1812207]
  - devlink: Add health error recovery status monitoring (Andrea Claudi) [1821039]


author: Andrea Claudi <aclaudi@redhat.com> [5.9.0-2.el8]
changelog:
  - tc: flower: fix json output with mpls lse (Andrea Claudi) [1885770]
  - tc-mpls: fix manpage example and help message string (Andrea Claudi) [1885770]
  - tc-vlan: fix help and error message strings (Andrea Claudi) [1885770]
  - m_mpls: test the 'mac_push' action after 'modify' (Andrea Claudi) [1885770]
  - m_mpls: add mac_push action (Andrea Claudi) [1885770]
  - m_vlan: add pop_eth and push_eth actions (Andrea Claudi) [1885770]
  - Update kernel headers (Andrea Claudi) [1885770]


author: Andrea Claudi <aclaudi@redhat.com> [5.12.0-1.el8]
changelog:
  - tc: f_flower: Add missing ct_state flags to usage description (Andrea Claudi) [1957243]
  - tc: f_flower: Add option to match on related ct state (Andrea Claudi) [1957243]


author: Andrea Claudi <aclaudi@redhat.com> [5.12.0-3.el8]
changelog:
  - tc: htb: improve burst error messages (Andrea Claudi) [1910745]
  - tc: u32: Fix key folding in sample option (Andrea Claudi) [1979425]
  - police: Fix normal output back to what it was (Andrea Claudi) [1981393]
  - police: Add support for json output (Andrea Claudi) [1981393]
  - police: add support for packet-per-second rate limiting (Andrea Claudi) [1981393]
  - Update kernel headers (Andrea Claudi) [1981393]
  - mptcp: add support for port based endpoint (Andrea Claudi) [1984733]


author: Stefano Brivio <sbrivio@redhat.com> - 6.38-3
changelog:
  - Fix loading of sets with dependencies on other sets (RHBZ#1647096), and
    hardcode 6.38-1.el7 for ipset-service upgrade and downgrade triggers, so that
    we don't run into issues with z-stream updates


author: Stefano Brivio <sbrivio@redhat.com> - 7.1-1
changelog:
  - Rebase to 7.1 (RHBZ#1649090):
    - Add compatibility support for strscpy()
    - Correct the manpage about the sort option
    - Add missing functions to libipset.map
    - configure.ac: Fix build regression on RHEL/CentOS/SL (Serhey Popovych)
    - Implement sorting for hash types in the ipset tool
    - Fix to list/save into file specified by option (reported by Isaac Good)
    - Introduction of new commands and protocol version 7, updated kernel include files
    - Add compatibility support for async in pernet_operations
    - Use more robust awk patterns to check for backward compatibility
    - Prepare the ipset tool to handle multiple protocol version
    - Fix warning message handlin
    - Correct to test null valued entry in hash:net6,port,net6 test
    - Library reworked to support embedding ipset completely
    - Add compatibility to support kvcalloc()
    - Validate string type attributes in attr2data() (Stefano Brivio)
    - manpage: Add comment about matching on destination MAC address (Stefano Brivio)
      (RHBZ#1649079)
    - Add compatibility to support is_zero_ether_addr()
    - Fix use-after-free in ipset_parse_name_compat() (Stefano Brivio) (RHBZ#1649085)
    - Fix leak in build_argv() on line parsing error (Stefano Brivio) (RHBZ#1649085)
    - Simplify return statement in ipset_mnl_query() (Stefano Brivio) (RHBZ#1649085)
    - tests/check_klog.sh: Try dmesg too, don't let shell terminate script (Stefano Brivio) 
  - Fixes:
    - Fix all shellcheck warnings in init script (RHBZ#1649085)
    - Make error reporting consistent, introduce different severities (RHBZ#1683711)
    - While restoring, on invalid entries, remove them and retry (RHBZ#1683713)
    - Fix covscan SC2166 warning in init script (RHBZ#1649085)


author: Phil Sutter <psutter@redhat.com> - 1.8.4-16
changelog:
  - tests/shell: Add test for bitwise avoidance fixes
  - ebtables: Optimize masked MAC address matches
  - nft: Optimize class-based IP prefix matches
  - nft: Fix for broken address mask match detection
  - nft: cache: Make nft_rebuild_cache() respect fake cache
  - tests: shell: Improve concurrent noflush restore test a bit
  - nft: Fix for concurrent noflush restore calls
  - nft: Fix error reporting for refreshed transactions
  - nft: Make batch_add_chain() return the added batch object


author: Phil Sutter <psutter@redhat.com> - 1.8.4-17
changelog:
  - extensions: dccp: Fix for DCCP type 'INVALID'
  - tests: shell: Merge and extend return codes test
  - nft: Fix command name in ip6tables error message
  - extensions: libxt_CT: add translation for NOTRACK
  - extensions: libipt_icmp: Fix translation of type 'any'
  - tests/shell: Test for fixed extension registration
  - libxtables: Register multiple extensions in ascending order
  - libxtables: Simplify pending extension registration
  - libxtables: Make sure extensions register in revision order


author: Phil Sutter <psutter@redhat.com> - 1.8.4-18
changelog:
  - xtables-translate: Fix translation of odd netmasks
  - nft: Fix bitwise expression avoidance detection
  - xtables-monitor: 'LL=0x304' is not very convenient, print LOOPBACK instead.
  - xtables-monitor: print packet first
  - xtables-monitor: fix packet family protocol
  - xtables-monitor: fix rule printing
  - xtables-monitor: Fix ip6tables rule printing


author: Phil Sutter <psutter@redhat.com> - 1.8.4-20
changelog:
  - extensions: SECMARK: Use a better context in test case
  - extensions: sctp: Translate --chunk-types option
  - extensions: sctp: Fix nftables translation
  - extensions: SECMARK: Implement revision 1
  - nft: cache: Retry if kernel returns EINTR


author: Phil Cameron <pcameron@redhat.com> - 1.1.4-16
changelog:
  - Moved upstream from https://fedorahosted.org/iptraf-ng/ to 
    https://github.com/iptraf-ng/iptraf-ng/ with release v1.1.4
    Fixes error in patch Patch03 - this fixes 1283773


author: Thomas Woerner <twoerner@redhat.com> 2.2.6-1
changelog:
  - New upstream version 2.2.6
    - Located at github
    - Fixes (RHBZ#1294913 and RHBZ#1375395)
  - Additional upstream patch (no_debug) to drop some debugging remains
  - Additional proposed patch to fix segmentation fault with -1 -C (RHBZ#599181)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-2
changelog:
  - Fix several memleak problems found by covscan (bz1606969)
  - Fix an possible overflow error (bz1606969)
  - Don't leak socket fd on connection error (bz1606969)
  - Check xen-dyn-event more flexible (bz1576164)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-3
changelog:
  - Update document and remove dead options to fix manpage scan warning (bz1612706)
  - Fix gating test error (bz1680619)


author: Chris Leech - 6.2.0.878-5.gitd791ce0
changelog:
  - 1849931, 1869438 go back to MD5 CHAP only by default
    new CHAP modes can cause issue with some targets,
    so SHA1/SHA256/SHA3-256 modes must be configured to enable now


author: Chris Leech <cleech@redhat.com> - 0.94-1
changelog:
  - new upstream location, update to 0.94
  - new devel package, upstream open-iscsi is dropping it's internal copy


author: Herton R. Krzesinski <herton@redhat.com> - 20190516-94.git711d3297
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update iwlwifi firmware to support the Cyclone Peak Dual Band 2x2 802.11ax (rhbz 1622442)
  - Pull new version of Netronome firmware (rhbz 1663989)
  - Update firmware for Chelsio T4/T5/T6 adapters (rhbz 1664678)
  - Update Netronome firmware that include bug fixes (rhbz 1673890)
  - Include firmware support for Intel Bluetooth 22261 (rhbz 1678095)


author: Bruno Meneguele <bmeneg@redhat.com> - 20191202-95.gite8a0f4c9
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update qed zipped/unzipped firmware to latest upstream (rhbz 1720394)
  - Update bnx2x firmware to latest upstream (rhbz 1720395)
  - AX200(Cyclone Peak 2 or CcP2) Bluetooth support (rhbz 1722693)
  - Firmware for Chelsio T4/T5/T6 adapters (rhbz 1725821)
  - Include to support Intel AX201 Harrison Peak(CNVi) on CML-U (rhbz 1725873)
  - Icelake Bluetooth firmware update (AX201, Harrison Peak, or HrP2) (rhbz 1726182)
  - DDP Package to support Columbiaville NIC (rhbz 1726454)
  - Add iwlwifi-cc-a0-48.ucode to linux-firmware (rhbz 1753962)
  - Change install section to use usptream installation process


author: Frantisek Hrbata <fhrbata@redhat.com> - 20200512-98.gitb2cad6a2
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update qed zipped/unzipped firmware to latest upstream (rhbz 1791030)
  - Update bnx2x firmware to latest upstream (rhbz 1791031)
  - Firmware - nvidia: add TU102/TU104/TU106 / TU116/117 signed firmware (rhbz 1801025)
  - Update latest Signed FW for AMD NAVI 10 Graphic (rhbz 1809846)


author: Jan Stancek <jstancek@redhat.com> - 20201022-100.gitdae4b4cd
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - ice: Pull Comms Market Segment Package (rhbz 1861491)
  - ice: Update to the Default OS DDP Package for ice driver (rhbz 1879278)


author: Jan Stancek <jstancek@redhat.com> - 20201118-101.git7455a360
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include to support Intel AX210 Typhoon Peak - Bluetooth firmware support (rhbz 1897069)
  - Include support for the Qualcomm AX500-DBS (QCA6390) 802.11ax Wireless - firmware support (rhbz 1725913)


author: Bruno Meneguele <bmeneg@redhat.com> - 20210702-103.gitd79c2677
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include support for the Qualcomm AX500-DBS (QCA6390) 802.11ax Wireless (rhbz 1725913)
  - Firmware for Chelsio T4/T5/T6 adapters (rhbz 1961398)
  - Incorrect NVIDIA GPU firmware used for TU102 and TU104 GPUs (rhbz 1965312)
  - Package the new iwl7260 ucode files and also the new binary format PNVM


author: Xin Long <lxin@redhat.com> - 2.11-3
changelog:
  - Deal with warnings under gcc 8
  - Call va_end after va_copy in json_vsprintf
  - Fix bogus date in jansson.spec


author: Anna Khaitovich <akhaitov@redhat.com> - 0.13.1-0.3
changelog:
  - Don't package empty /usr/share/doc/json-c
  - Resolves: rhbz#1741076
  - Do not use --enable-rdrand
  - Resolves: rhbz#1806532


author: Jeff Moyer <jmoyer@redhat.com> - 1.101-4
changelog:
  - Build for x86_64 as well.  Kdump support doesn't work there, but users
    should be able to use kexec.


author: Jeff Moyer <jmoyer@redhat.com> - 1.101-8
changelog:
  - Fix the service stop case.  It was previously unloading the wrong kernel.
  - Implement the "restart" function.
  - Add the "irqpoll" option as a default kdump kernel commandline parameter.
  - Create a default kernel command line in the sysconfig file upon rpm install.


author: Thomas Graf <tgraf@redhat.com> - 1.101-10
changelog:
  - kdump7.patch
     o Remove elf32 core headers support for x86_64
     o Fix x86 prepare elf core header routine
     o Fix ppc64 kexec -p failure for gcc 4.10
     o Fix few warnings for gcc 4.10
     o Add the missing --initrd option for ppc64
     o Fix ppc64 persistent root device bug
  - Remove --elf32-core-headers from default configuration, users
    may re-add it via KEXEC_ARGS.
  - Remove obsolete KEXEC_HEADERS


author: Thomas Graf <tgraf@redhat.com> - 1.101-15
changelog:
  - Don't add kdump service by default, let the user manually add it to
    avoid everyone seeing a warning.


author: Neil Horman <nhorman@redhat.com> - 1.101-45
changelog:
  - fixed typo in mkdumprd for bz 202983
  - fixed typo in mkdumprd for bz 203053
  - clarified docs in kdump.conf with examples per bz 203015


author: Jarod Wilson <jwilson@redhat.com> - 1.101-46
changelog:
  - ppc64 fixups:
    - actually build ppc64 binaries (bug 203407)
    - correct usage output
    - avoid segfault in command-line parsing
  - install kexec man page
  - use regulation Fedora BuildRoot


author: Neil Horman <nhorman@redhat.com> - 1.101-58
changelog:
  - Updating kdump.init and mkdumprd with most recent RHEL5 fixes
  - Fixing BuildReq to require elfutils-devel-static


author: Neil Horman <nhorman@redhat.com> - 1.102pre-1
changelog:
  - Bumping kexec version to latest horms tree (bz 257201)
  - Adding trigger to remove initrds when a kernel is removed


author: Neil Horman <nhorman@redhat.com> - 1.102pre-3
changelog:
  - Fix ARCH placement in kdump init script (bz 427201)
  - Fix BuildRequires
  - Fix Makedumpfile to build with new libelf


author: Neil Horman <nhorman@redhat.com> - 1.102pre-6
changelog:
  - Bringing rawhide up to date with bugfixes from RHEL5
  - Adding patch to prevent kexec buffer overflow on ppc (bz 428684)


author: Neil Horman <nhorman@redhat.com> 2.0.0-18
changelog:
  - Updated initscript to use mkdumprd2 if manifest is present
  - Updated spec to require dash
  - Updated sample manifest to point to correct initscript
  - Updated populate_std_files helper to fix sh symlink


author: CAI Qian <caiqian@redhat.com> - 2.0.0-34
changelog:
  - Massive forward-port from RHEL6
  - Update kexec-kdump-howto.txt
  - Update docs to reflect use of ext4
  - Update mkdumprd to pull in all modules needed
  - Fix mkdumprd typo
  - Removed universal add of ata_piix from mkdumprd
  - Fix infinite loop from modprobe changes
  - Fixed kexec-kdump-howto.doc for RHEL6
  - Update makedumpfile to 1.3.5
  - Improved mkdumprd run time
  - Cai's fix for broken regex
  - Fixing crashkernel syntax parsing
  - Fix initscript to return proper LSB return codes
  - Fixed bad call to resolve_dm_name
  - Added poweroff option to mkdumprd
  - Fixed readlink issue
  - Fixed x86_64 page_offset specifictaion
  - Fixed lvm setup loop to not hang
  - Added utsname support to makedumpfile for 2.6.32
  - Fix critical_disks list to exclude cciss/md
  - Add help info for -b option
  - Add ability to handle firmware hotplug events
  - Update mkdumprd to deal with changes in busybox fsck
  - Vitaly's fix to detect need for 64 bit elf
  - Fix major/minor numbers on /dev/rtc
  - Fix ssh id propogation w/ selinux
  - Add blacklist feature to kdump.conf
  - Removed rhpl code from firstboot
  - Fixed firstboot enable sense
  - Remove bogus debug comment from mkdumprd.
  - Handle SPARSEMEM properly
  - Fix scp monitoring script
  - Fix firstboot to find grub on EFI systems
  - Fixed mkdumprd to remove dup insmod
  - Fixed kdump fsck pause
  - Fixed kdump option handling
  - fixed raid5 module detection


author: Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-42
changelog:
  - get ip addr with getent
  - spec: depends on dracut-network
  - Handle net option for nfs in kdump.conf correctly


author: Dave Young <dyoung@redhat.com> - 2.0.3-44
changelog:
  - update ppc64 sysconfig, resolve bug 811449
  - deal with nic rename issue, resolve bug 810107
  - update x86_64 sysconfig, resolve bug 813711


author: Dave Young <ruyang@redhat.com> - 2.0.3-46
changelog:
  - mkdumprd: Start using --hostonly and --add kdumpbase while calling dracut
  - get_mp function cleanup
  - move kdump script order to the end of pre pivot
  - port raw dump from rhel6
  - remove multi dump


author: Dave Young <ruyang@redhat.com> - 2.0.3-48
changelog:
  - do_default_action cleanup, Resolves: bz805773
  - add rhcrashkernel-param for anaconda use, Resolves: bz707441
  - Basic iscsi target dump support (software initiator), Resolves bz822701
  - Static ip configuratio support, Resolves: bz822739
  - udev rules fix, Resolves: bz808817


author: Dave Young <ruyang@redhat.com> - 2.0.3-49
changelog:
  - cleanup DUMP_INSTRUCTION handling
  - final reboot behavior fix
  - dump_rootfs for default target fix
  - add vlan support
  - fix and refactor bond handling code
  - fix and refactor bridge handling code
  - core_collector doc basic fix
  - omit plymouth module, Resolves: bz821997
  - mkdumprd manpage cleanup manpage
  - mkdumprd: remove --debug
  - mkdumprd: remove noconf
  - makedumprd: remove -d
  - kdump.conf add sshkey
  - kdump.conf remove disk_timeout
  - kdump.conf make path uncommented
  - kdump.conf.5 add default poweroff
  - kdump.conf default shell fix
  - kdump.conf default default action fix
  - kdump.conf.5 remove module option
  - kdump.conf remove kdump_pre/kdump_post
  - kdump.conf: remove link_delay


author: Dave Young <ruyang@redhat.com> - 2.0.3-50
changelog:
  - add blacklist option, Resolves: bz805774
  - Add kdump_post and kdump_pre support, Resolves: bz805773
  - Port check_config from rhel6, Resolves: bz805778
  - raw core_collector fix
  - ssh core_collector fix
  - drcut-kdump.sh: cleanup kdump.conf check


author: Dave Young <ruyang@redhat.com> - 2.0.3-51
changelog:
  - add s390x netdev setup
  - Add s390x support
  - Cleanup temp file leaved at /tmp/
  - add check_size function for fs dump
  - add ssh check_size
  - blacklist patch apply fix
  - Respect bonding mode
  - Support dump over vlan tagged bonding


author: Dave Young <ruyang@redhat.com> - 2.0.3-53
changelog:
  - refactor net option
  - use fstab-sys to mount nfs
  - rename function dump_localfs
  - dump_localfs error path fix
  - update kexec-kdump-howto.txt about systemctl commands
  - ssh propagate alert message fix
  - remove useless dracut cmdline '-c /dev/null'
  - remove useless dracut cmdline for kernel-modules and kdumpbase
  - install core_collector in module-setup.sh
  - install extra_bins in module-setup.sh
  - remove busybox dependency
  - improve warning message of space checking
  - do not mount root twice
  - do not add fstab-sys module in dracut cmdline
  - omit dash module
  - network dns config fix
  - shell exit value fix


author: Dave Young <ruyang@redhat.com> - 2.0.3-54
changelog:
  - pass raw device as dracut argument
  - iscsi setup fix
  - firstboot: add automatic and manual memory reservation for rhel
  - firstboot: remove unnecessary underline shortkey
  - firstboot: fix gtk warning about non-zero page size
  - firstboot: update all kernels config in grubbyCmd
  - firstboot: add actual reserved memory widget
  - firstboot code cleanup
  - rhcrashkernel-param: echo crashkernel=auto for rhel7
  - Remove the kernel-kdump handling
  - s390x firstboot fix
  - remove elilo support
  - grub2 fix in firstboot
  - Take closing the reboot dialog as no
  - Handle new crashkernel= syntax in firstboot
  - Fix a localized string in firstboot
  - Configure kdump in firstboot
  - fix firstboot to ensure kdump svc is disabled properly
  - firstboot text domain fix
  - Update to use systemctl instead of sysv chkconfig
  - port force_rebuild kdump.conf option
  - Change return value to indicate the result of dump_raw() correctly.
  - call dracut function for default shell


author: Dave Young <ruyang@redhat.com> - 2.0.3-56
changelog:
  - Pull vmcore-dmesg patches from vivek
  - ppc/ppc64: compile purgatory with gcc option msoft-float
  - Update to support f18 grub2 efi config file
  - pass persistent name to dracut --device
  - pass persistent name to dracut --mount
  - use persistent name in kdump.conf of initramfs
  - mkdumprd: add function get_persistent_dev
  - remove useless uuid and label handling


author: Dave Young <ruyang@redhat.com> - 2.0.3-59
changelog:
  - Enable kdump service after installation
  - get MEM_RESERVED from sysfs attribute
  - get_ssh_size: use -n to redirect stdin from /dev/null
  - add random feeding code for ssh dump
  - kdump option space checking improvement
  - kdumpctl: multi dump target checking fix


author: Dave Young <ruyang@redhat.com> - 2.0.3-60
changelog:
  - makedumpfile 1.5.1
  - Update po tar.gz
  - Add a notes for zanata process
  - Add two xmls file for po zanata translation
  - Cleanup and recreate po files


author: Dave Young <ruyang@redhat.com> - 2.0.3-62
changelog:
  - Pull translated po files from zanata
  - Optimize redundent code fetching server of network dump
  - change the dump dir format to be more readable


author: Dave Young <ruyang@redhat.com> - 2.0.3-63
changelog:
  - revert explictly handling of PIPESTATUS
  - enable pipefail bash option
  - wrong ssh key fix
  - build fix: Update 3 po files: po/gu.po po/or.po po/zh_CN.po


author: Dave Young <ruyang@redhat.com> - 2.0.3-65
changelog:
  - Add support for team devices
  - Update translation file po/it.po
  - remove wait for net ok function
  - add bootdev cmdline param
  - kdumpnic cmdline file name cleanup


author: Dave Young <ruyang@redhat.com> - 2.0.3-66
changelog:
  - Spec: remove kdump image when a corresponding kernel is removed
  - Merge an upstream patch for fix a ppc64 makedumpfile bug


author: Baoquan He <bhe@redhat.com> - 2.0.3-67
changelog:
  - Remove comma which is redundant
  - Modify codes related to dump dir to make it clearer
  - Rectify the get_host_ip implementation
  - Revert: Merge an upstream patch for fix a ppc64 makedumpfile bug with with CONFIG_SPARSEMEM_EXTREME
  - pull makedumpfile 1.5.3


author: Baoquan He <bhe@redhat.com> - 2.0.3-68
changelog:
  - tune sysconfig to save memory usage
  - Remove useless codes related to LOGGER in kdumpctl
  - kdumpctl:print out the service status
  - Return to start() function when check_ssh_target failed
  - use findmnt instead of blkid in mkdumprd
  - check dump target mounting earlier
  - kdumpctl: rename function name check_config
  - add function to check kdump config file
  - dracut-module-setup.sh: remove UUID/LABEL quotes before using it
  - Change dump_to_rootfs to be a default option and reboot to be default action
  - Remove "-F" in CORE_COLLECTOR when dump_to_rootfs


author: Baoquan He <bhe@redhat.com> - 2.0.4-1
changelog:
  - Delete several patches which have been merged into kexec-tools-2.0.4
  - Revert: Release 2.0.3-72
  - Release 2.0.3-72
  - Pull kexec-tools-2.0.4
  - Check if block device as dump target is resettable
  - mkdumprd: add function perror_exit
  - Deprecate blacklist option


author: Baoquan He <bhe@redhat.com> - 2.0.4-2
changelog:
  - kdump: Save vmcore-dmesg.txt before saving vmcore
  - Remove "ip=" overwrite to 40ip.conf
  - Add support for bridge over bond/team/vlan.
  - Fix bonding options syntax and get all specified options from ifcfg file.
  - add dracut_args option to kdump.conf
  - kexec-tools.spec: Add ethtool to dependency.
  - error out if dump target is encrypted


author: Baoquan He <bhe@redhat.com> - 2.0.4-3
changelog:
  - mkdumprd: remove -M option for dracut
  - kdumpctl: add selinux relabel when service startup
  - depends on dracut selinux module
  - dracut-kdump.sh: umount rootfs after dump_to_rootfs
  - kdump.sysconfig: append "panic=10" to kdump cmdline
  - kexec-kdump-howto: grubby is suggested modifing kernel cmdline
  - kexec-tools.spec: removes kexec udev rules for s390
  - kdump.sysconfig: Add option action_on_fail and set its default as continue
  - Add tab key as delimiter for core_collector in kdump.conf
  - redirect stdout to stderr


author: Baoquan He <bhe@redhat.com> - 2.0.4-4
changelog:
  - dracut-module-setup.sh: improve the approach to get a bridged interface list
  - dracut-module-setup.sh: cleanup - use kdump_get_mac_addr() function
  - dracut-module-setup.sh: use kernel exported mac address in kdump_get_mac_addr()
  - dracut-module-setup.sh: use perm addr of slaves to setup bonding network
  - kdump: Do not output debug messages by default
  - dracut-module-setup.sh: kdump module depends on drm module
  - mkdumprd: return error if no write permission on save path of server for ssh


author: Baoquan He <bhe@redhat.com> - 2.0.4-5
changelog:
  - monitor-dd-progress fix
  - rawdump: only show dd progress bar when core_collector is not makedumpfile
  - kexec-tools.spec: replaces scriptlets with new systemd macros
  - dracut-kdump.sh: umount fs right before kdump exit
  - dracut-kdump.sh: recursively umount fs and its submounts
  - dracut-kdump.sh: cleanup - using local variable names instead of $1/$2 in functions
  - dracut-kdump.sh: name the invalid vmcore to vmcore-incomplete
  - dracut-kdump.sh: Output top level information about the kdump progress.
  - kexec-kdump-howto: Add a section for debugging tips


author: Baoquan He <bhe@redhat.com> - 2.0.4-6
changelog:
  - add snappy build
  - add lzo build
  - pull makedumpfile-1.5.4
  - mkdumprd: check return value of subshell
  - mkdumprd: get_persistent_dev() return original dev if no persistent dev exists.
  - dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs()
  - dracut-kdump.sh: explicitly sync after each dump
  - Correct wrong weekday of changelog
  - kexec-tools.spec: Remove incorrect description in changelog


author: Baoquan He <bhe@redhat.com> - 2.0.4-7
changelog:
  - dracut-kdump.sh: add do_dump() and error out if dump vmcore fails
  - dracut-module-setup.sh: setup correct system time and time zone in 2nd kernel.
  - kernel cmdline: Remove hugepage allocations
  - Use /lib/dracut/no-emergency-shell to control action on fail
  - Revert: kdump.sysconfig: Add option action_on_fail and set its default as continue
  - dracut-kdump.sh: Redirect kdump script stdout/stderr to /dev/console
  - makedumpfile: Add vmap_area_list definition for ppc/ppc64.


author: Baoquan He <bhe@redhat.com> - 2.0.4-9
changelog:
  - Strip inline comments from the kdump config file before use
  - kdump-lib.sh: add common function strip_comments
  - Introduce kdump-lib.sh for kdump shared functions
  - kdump.service: Start kdump after network is online and remote fs is mounted
  - dracut-module-setup: _dev to be a local variable
  - kdumpctl: Run multiple kdumpctl instances one by one in serial order


author: WANG Chao <chaowang@redhat.com> - 2.0.4-12
changelog:
  - fix sadump format phys_base calculating error
  - kdump, x86: Process multiple Crash kernel in /proc/iomem
  - makedumpfile: wrong cyclic buffer size recalculation causes bitmap data corruption
  - Fix max_mapnr issue on system has over 44-bit addressing.


author: WANG Chao <chaowang@redhat.com> - 2.0.4-14
changelog:
  - Add rd.memdebug in kdump module
  - kdumpctl: Avoid leaking fd to subshell
  - makedumpfile: Understand >= v3.11-rc4 dmesg
  - makedumpfile, ppc: Support to filter dump for kernels that use CONFIG_SPARSEMEM_VMEMMAP.


author: WANG Chao <chaowang@redhat.com> - 2.0.4-18
changelog:
  - update translation files
  - makedumpfile: default to lzo compression
  - makedumpfile: add makedumpfile.conf.sample and its manpage


author: WANG Chao <chaowang@redhat.com> - 2.0.4-20
changelog:
  - vmcore-dmesg: fix timestamp error in vmcore-dmesg.txt
  - makedumpfile: re-enable mmap() and introduce --non-mmap
  - kdump.conf uncomment default core_collector line
  - fix an issue when 'ssh' directive appearing in kdump.conf, the rest part of
    lines in this file are ignored


author: WANG Chao <chaowang@redhat.com> - 2.0.4-21
changelog:
  - makedumpfile: Improve progress information for huge memory system
  - s390: use nr_cpus=1 instead of maxcpus=1


author: WANG Chao <chaowang@redhat.com> - 2.0.4-23
changelog:
  - ssh dump: create random-seed manually
  - makedumpfile: memset() in cyclic bitmap initialization introduce segment fault.
  - Add acpi_no_memhotplug to kdump kernel
  - Add fence kdump support


author: WANG Chao <chaowang@redhat.com> - 2.0.4-24
changelog:
  - add kdump-in-cluster-environment.txt to rpm pkg
  - Secure Boot status check warning
  - Some watchdog driver support


author: WANG Chao <chaowang@redhat.com> - 2.0.4-25
changelog:
  - Pass disable_cpu_apicid to kexec of capture kernel
  - Relax restriction of dumping on encrypted target
  - regression fix on wdt kernel drivers instal


author: WANG Chao <chaowang@redhat.com> - 2.0.6-1
changelog:
  - Rebase kexec-tools-2.0.6
  - fix an issue when dump path is mounted on nfs
  - vmcore-dmesg: stack smashing fix
  - get_ssh_size fix for localized df output


author: WANG Chao <chaowang@redhat.com> - 2.0.6-4
changelog:
  - generate kdump service dependencies on the fly
  - kdump.conf: a standalone path directive becomes a relative path to it's backed disk.


author: WANG Chao <chaowang@redhat.com> - 2.0.7-5
changelog:
  - rework of kdump error handling
  - add fadump support
  - add static route support
  - systemd will take care of shutdown and umount filesystems


author: WANG Chao <chaowang@redhat.com> - 2.0.7-8
changelog:
  - use absolute path for executable in systemd service
  - update to kdump-anaconda-addon-003
  - remove dead kdump firstboot module and po files


author: Baoquan He <bhe@redhat.com> - 2.0.7-9
changelog:
  - kdumpctl: Use kexec file based syscall for secureboot enabled machines
  - kdumpctl: Use kexec file based mode to unload kdump kernel
  - kdumpctl: Do not redirect error messages to /dev/null
  - kexec: Provide an option to use new kexec system call


author: WANG Chao <chaowang@redhat.com> - 2.0.7-10
changelog:
  - Enable ppc64le arch.
  - Rebase makedumpfile-1.5.7
  - add sample eppic scripts to kexec-tools-eppic package
  - Restart kdump service on cpu ADD/REMOVE events


author: WANG Chao <chaowang@redhat.com> - 2.0.8-5
changelog:
  - remove panic_on_warn kernel param in 2nd kernel
  - remove sysctl.conf to restore sysctl default values in 2nd kernel
  - fix a core_collector issue in ssh and raw dump case
  - update to kdump-anaconda-addon-005-2-g86366ae.tar.gz
  - some cleanups


author: WANG Chao <chaowang@redhat.com> - 2.0.8-6
changelog:
  - mount fail if its mount point doesn't exist in /sysroot
  - rebuild initrd dependency during kdump restart
  - fix a dump path issue


author: Dave Young <dyoung@redhat.com> - 2.0.8-8
changelog:
  - execute kdump_post after do_default_action
  - update kdump anaconda addon (translations/help text issus)


author: Baoquan He <bhe@redhat.com> -2.0.8-9
changelog:
  - Revert "execute kdump_post after do_default_action"
  - dracut-module-setup.sh: change the insecure use of /tmp/*$$* filenames
  - make kdump saving directory name consistent with RHEL6


author: Baoquan He <bhe@redhat.com> -2.0.8-10
changelog:
  - add fPIC to makefumpfile CFLAGS to support hardening
  - dracut-module-setup: Enhance kdump to support the bind mounted feature in Atomic
  - Fix the warning if the target path is bind mount in Atomic
  - Get the mount point correctly, if the device has several mount point
  - kdump-lib: Add new function to judge the system is Atomic or not
  - kdump-lib: Add the new function to enhance bind mounted judgement
  - Remove duplicate slash in save path


author: Baoquan He <bhe@redhat.com> -2.0.8-11
changelog:
  - make kdump work when kernel crash after shutdown
  - Disable transparent hugepages in second kernel
  - Filtered out "noauto" options in 2nd kernel fstab


author: Dave Young <dyoung@redhat.com> - 2.0.9-1
changelog:
  - Rebase kexec-tools 2.0.9
  - Rebase makedumpfile 1.5.8
  - revert 6347630 since ipv6 patches has not been reviewed.


author: Dave Young <dyoung@redhat.com> - 2.0.9-2
changelog:
  - Resolve bug 1236456, kexec load fail because koji add extra gcc flags.
  - Remove -FPIC for makedumpfile since it is not necessary without harden build


author: Dave Young <dyoung@redhat.com> - 2.0.10-1
changelog:
  - Rebase kexec-tools 2.0.10
  - Rebase eppic git tree 050615
  - Enhance kdump.conf "default" parameters check


author: Dave Young <dyoung@redhat.com> - 2.0.10-3
changelog:
  - Update kdump addon icon
  - Revert static route corner case patches per bhe. He discussed with Marc
    it is just a corner case.


author: Dave Young <dyoung@redhat.com> - 2.0.10-4
changelog:
  - ipv6 support (except for link scope addresses)
  - Apply the manual DNS to the 2nd kernel
  - load iTCO_wdt early in cmdline hook


author: Baoquan He <bhe@redhat.com> - 2.0.10-6
changelog:
  - mkdumprd: Remove ifcfg from dracut's modules
  - module-setup: Choose the first matched gateway in kdump_static_ip
  - module-setup: Add permanent option to detect static ip address or not


author: Dave Young <dyoung@redhat.com> - 2.0.11-3
changelog:
  - use "systemctl reboot -f" for reboot action
  - Remove kernel param "quiet" from kdump kernel cmdline
  - kdump.sysconfig: add KDUMP_COMMANDLINE_REMOVE
  - Add missing prefixes in default sysconfig file
  - fix bogus date in changelog


author: Dave Young <dyoung@redhat.com> - 2.0.12-4
changelog:
  - update kdump anaconda addon to add mem range in tui 
  - .gitignore: Update to make it more generic
  - kdumpctl: check_rebuild improvement 
  - kdumpctl: Do not rebuild initramfs when $KDUMP_BOOTDIR is read only


author: Dave Young <dyoung@redhat.com> - 2.0.12-5
changelog:
  - kdump-lib: Add get_ifcfg_filename() to get the proper ifcfg file
  - module-setup: Use get_ifcfg_filename() to get the proper ifcfg file


author: Dave Young <dyoung@redhat.com> - 2.0.12-9
changelog:
  - Update kdump anaconda addon
  - makedumpfile: Support _count -> _refcount rename in struct page
  - module-setup: Don't handle iBFT in kdump


author: Dave Young <dyoung@redhat.com> - 2.0.13-5
changelog:
  - Fix bug 1373958 for system boot without initrd
  - Do not depend on /etc/fstab in kdumpctl in case it does not exist


author: Dave Young <dyoung@redhat.com> - 2.0.13-8
changelog:
  - kexec/arch/i386: Add support for KASLR memory randomization
  - Update kdump anaconda addon
  - fadump: restore default initrd when fadump mode is disabled
  - kdump/fadump: fix network interface name when switching from fadump to kdump
  - kdumpctl: filter 'root' kernel parameter when running in live images
  - Documentation: step by step guide on confiuring kdump in live images


author: Dave Young <dyoung@redhat.com> - 2.0.13-9
changelog:
  - rename function kdump_to_udev_name
  - Raw dump: use by-id as persistent policy in 2nd kernel
  - drop dracut duplicate functions
  - dracut-kdump: use POSIX shell syntax
  - Correct two typos in kdumpctl and kdump.conf


author: Dave Young <dyoung@redhat.com> - 2.0.14-4
changelog:
  - drop kdump script rhcrashkernel-param in kexec-tools repo
  - kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors
  - kdumpctl: change prepare_cmdline() to operate KDUMP_COMMANDLINE directly
  - use --hostonly-i18n for dracut


author: Dave Young <dyoung@redhat.com> - 2.0.14-5
changelog:
  - kdump-lib.sh: fix incorrect usage with pipe as input for grep -q in is_pcs_fence_kdump()
  - Document: fix incorrect link in fadump-how.txt


author: Dave Young <dyoung@redhat.com> - 2.0.14-7
changelog:
  - kdump-emergency: fix "Transaction is destructive" emergency failure
  - mkdumprd: reduce lvm2 memory under kdump


author: Dave Young <dyoung@redhat.com> - 2.0.14-8
changelog:
  - kdumpctl: fix status check when CONFIG_CRASH_DUMP is not enabled in kernel
  - kdumpctl: fix a bug in remove_cmdline_param()
  - kdumpctl: remove "root=X" for kdump boot
  - Revert "kdumpctl: filter 'root' kernel parameter when running in live images"


author: Dave Young <dyoung@redhat.com> - 2.0.14-9
changelog:
  - kdump: Introduce 'force_no_rebuild' option
  - kdump-lib-initramfs.sh: ignore the failure of echo
  - kdump.sysconfig/x86_64: Add nokaslr to kdump kernel cmdline


author: Dave Young <dyoung@redhat.com> - 2.0.14-10
changelog:
  - kdumpctl: improve "while read" time for /etc/kdump.conf
  - kdumpctl: update check_dump_fs_modified() to use "lsinitrd -f"
  - kdumpctl: improve check_wdt_modified()
  - kdumpctl: remove is_mode_switched()
  - kdumpctl: bail out earlier in case of no reserved memory


author: Dave Young <dyoung@redhat.com> - 2.0.14-11
changelog:
  - kdumpctl: change the shebang header to use /bin/bash
  - kdumpctl: call strip_comments only when necessary to speedup
  - Revert "kdumpctl: improve "while read" time for /etc/kdump.conf" (rhbz1449801)


author: Dave Young <dyoung@redhat.com> - 2.0.14-13
changelog:
  - kexec-tools.spec: Fix whitespace errors
  - dracut-module-setup: Fix test for inclusion of DRM modules
  - kdump.conf.5: clarify the fence_kdump_nodes option


author: Dave Young <dyoung@redhat.com> - 2.0.15-3
changelog:
  - module-setup: fix 99kdumpbase network dependency
  - mkdumprd: omit dracut modules in case of network dumping
  - mkdumprd: omit dracut modules in case of no dm target
  - mkdumprd: omit crypt when there is no crypt kdump target
  - kdumpctl: use generated rd.lvm.lv=X
  - mkdumprd: change for_each_block_target() to use get_kdump_targets()
  - kdump-lib.sh: introduce get_kdump_targets()
  - kdump-lib.sh: fix improper get_block_dump_target()
  - kdumpctl: fix infinite loop caused by running under bash


author: Dave Young <dyoung@redhat.com> - 2.0.15-10
changelog:
  - Improve 'cpu add' udev rules
  - module-setup: suppress the early iscsi error messages
  - mkdumprd: use 300s as the default systemd unit timeout for kdump mount


author: Dave Young <dyoung@redhat.com> - 2.0.15-13
changelog:
  - dracut-module-setup.sh: eliminate redundant kdump_get_mac_addr call
  - mkdumprd: use --quiet dracut argument to speedup initramfs build
  - mkdumprd: fix patterns to modify mount options
  - fadump: rebuild default initrd with dump capture capability
  - module-setup: remove software iscsi cmdline generated by dracut
  - kdumpctl: remove some cmdline inheritage from 1st kernel
  - mkdumprd: apply dracut "--hostonly-cmdline" and "--no-hostonly-default-device"
  - Change dump_to_rootfs to use "--mount" instead of "root=X"
  - kdumpctl: move is_fadump_capable() to kdump-lib.sh
  - Revert "kdumpctl: use generated rd.lvm.lv=X"
  - Revert "mkdumprd: omit crypt when there is no crypt kdump target"
  - Revert "mkdumprd: omit dracut modules in case of no dm target"
  - Revert "mkdumprd: omit dracut modules in case of network dumping"
  - update bogus date in rpm spec


author: Dave Young <dyoung@redhat.com> - 2.0.16-2
changelog:
  - dracut-module-setup.sh: check whether to include multipath-hostonly or not
  - Revert "kdumpctl: sanity check of nr_cpus for x86_64 in case running out of vectors"
  - kdumpctl: skip selinux-relabel for dracut_args --mount dump target


author: Dave Young <dyoung@redhat.com> - 2.0.16-6
changelog:
  - kdump.sysconfig.ppc64(le): remove "root=" param from ppc64(le) 2nd kernel
  - kdumpctl: Check the modification time of core_collector
  - dracut-module-setup.sh: pass correct ip= param for ipv6


author: Kairui Song <kasong@redhat.com> - 2.0.17-14
changelog:
  - Add support to supply 'kaslr-seed' to secondary kernel
  - kexec-tools.spec: Drop kexec-tools-2.0.3-disable-kexec-test.patch


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-16
changelog:
  - dracut-module-setup: Enable dracut squash module
  - dracut-module-setup: Fix DRM module inclusion test for hyper-v


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-17
changelog:
  - Update help text to indicate --mem-usage is supported on archs other than x86_64
  - Fix 'makedumpfile --split' error ("Can't read the buffer of struct page") on x86_64


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-19
changelog:
  - Add aarch64 specific kdump.sysconfig and use 'nr_cpus' instead of 'maxcpus'
  - Add missing usage info
  - Throttle kdump reload request triggered by udev event
  - Rewrite kdump's udev rules
  - kdumpctl: Add reload support


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-20
changelog:
  - makedumpfile: Fix failure of detection of SPARSEMEM EXTREME in case of -x VMLINUX
  - makedumpfile: ppc64: increase MAX_PHYSMEM_BITS to 128TB
  - kdumpctl: Rebuild initramfs if loaded kernel modules changed


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-21
changelog:
  - makedumpfile: Support newer kernels
  - kdump-lib-initramfs.sh: using -force option when poweroff
  - kexec-tools/vmcore-dmesg: fix infinite loop if log buffer wraps around
  - makedumpfile: sadump: fix failure of reading 640 KB backup region if at over 4GB location
  - Make udev reload rules quiet during bootup


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-24
changelog:
  - makedumpfile/arm64: Fix 'info->page_offset' calculation for both KASLR and non-KASLR cases
  - makedumpfile: Prepare paddr_to_vaddr() for arch-specific p2v conversion


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-26
changelog:
  - earlykdump: fix kexec fails to load the early kdump kernel
  - makedumpfile/x86_64: fix an unnecessary message with --mem-usage option


author: Pingfan Liu <piliu@redhat.com> - 2.0.17-27
changelog:
  - Revert "kdumpctl, earlykdump: Don't use kexec_file_load when secure boot is enabled"
  - mkdumprd: refine regex on dropping mount options


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-1
changelog:
  - kexec-tools: rebasing to 2.0.19
  - makedumpfile: upgrade to 1.6.5
  - kexec-tools: x86: Introduce a new option --reuse-video-type
  - makedumpfile: exclude pages that are logically offline
  - earlykdump: Fix failure when earlykdump is included by dracut
  - Update man page for new kdumpctl command: reload / rebuild
  - kdumpctl: add rebuild support
  - rhel-only/kexec.rules: create dedicated udev rules for ppc64


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-2
changelog:
  - kdumpctl: Detect block device driver change for initramfs rebuild
  - Revert "kdumpctl: Rebuild initramfs if loaded kernel modules changed"
  - mkdumprd: allow spaces after 'path' config phrase with network dump setting
  - kexec.rules: create dedicated udev rules for ppc64
  - Revert "rhel-only/kexec.rules: create dedicated udev rules for ppc64"
  - rh-only makedumpfile/arm64: Add support for ARMv8.2-LVA (52-bit user-space VA support)


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-3
changelog:
  - earlykdump: Add a note of final_action option to avoid crash loop
  - Add final_action option to kdump.conf
  - Add failure_action as alias of default and make default obsolete
  - earlykdump: warn when installed kernel version differs from dracut target
  - earlykdump: add more sanity check when generating initramfs
  - fadump: use the original initrd to rebuild fadump initrdfrom


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-4
changelog:
  - kexec-kdump-howto.txt: Add document about encrypted targets
  - kexec-kdump-howto.txt: Add document about initramfs rebiuld
  - kexec-kdump-howto: Add note on setting correct value of kptr_restrict
  - doc: fix dead links in the file kexec-kdump-howto.txt
  - earlykdump: provide a prompt message after the rebuilding of kdump initramfs.
  - Get rid of duplicated strip_comments when reading config
  - mkdumprd: Improve the config reading logic
  - kdumpctl: don't always rebuild when extra_modules is set
  - kdumpctl: follow symlink when checking for modified files
  - fadump: leverage kernel support to re-regisgter FADump


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-5
changelog:
  - kdumpctl: check for ssh path availability when rebuild
  - kdumpctl: Check kdump.conf for error when rebuild is called
  - makedumpfile: x86_64: Add support for AMD Secure Memory Encryption
  - aarch64/kdump.sysconfig: Make config options similar to x86_64


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-9
changelog:
  - kexec/arm64: Add support for handling zlib compressed (Image.gz) image
  - kexec/kexec-zlib.h: Add 'is_zlib_file()' helper function
  - kexec-uImage-arm64.c: Fix return value of uImage_arm64_probe()
  - kexec/kexec.c: Add the missing close() for fd used for kexec_file_load()


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-12.3
changelog:
  - Limit the size of vmcore-dmesg.txt to 2G
  - makedumpfile: x86_64: Fix incorrect exclusion by -e option with KASLR
  - mkdumprd: ensure ssh path exists before check size


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-12.4
changelog:
  - dracut-module-setup.sh: Don't use squash module for fadump
  - Don't mount the dump target unless needed
  - dracut-module-setup: fix bond ifcfg processing
  - Doc: amend the man page of kdump.conf


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-5
changelog:
  - Don't execute final_action if failure_action terminates the system
  - module-setup: re-fix 99kdumpbase network dependency
  - kdumpctl: bail out immediately if host key verification failed
  - kdumpctl: echo msg when waiting for connection
  - kdumpctl: distinguish the failed reason of ssh
  - kdumpctl: wait a while for network ready if dump target is ssh
  - dracut-module-setup: filter out localhost for generic_fence_kdump
  - dracut-module-setup: get localhost alias by manual


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-6
changelog:
  -rhel-8.2.0, origin/rhel-8.2.0) Increase SECTION_MAP_LAST_BIT to 4
  - spec: move binaries from /sbin to /usr/sbin
  - As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify
  - kdumpctl: make reload fail proof


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-10
changelog:
  - arm64: kdump: deal with a lot of resource entries in /proc/iomem
  - arm64: kexec: allocate memory space avoiding reserved regions
  - kexec: add variant helper functions for handling memory regions


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-19
changelog:
  - dracut-module-setup.sh: improve get_alias()
  - fadump: update fadump-howto.txt with some troubleshooting help
  - Append both nofail and x-systemd.before to kdump mount target
  - Partially Revert "Don't mount the dump target unless needed"
  - Don't unmount the dump target just after saving vmcore


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-20
changelog:
  - Update docs for the new noauto dump target support
  - kexec-kdump-howto.txt: Add some format to the document
  - mkdumprd: generate usable kdump initramfs even target is not mounted
  - Use get_mount_info to replace findmnt calls
  - kdump-lib.sh: add fstab failback helper for getting mount info
  - Allow calling mkdumprd from kdumpctl even if targat not mounted
  - Add a is_mounted helper
  - Introduce get_kdump_mntpoint_from_target and fix duplicated /
  - Doc: Improves the early-kdump-howto.txt document in several points
  - Doc: Add --force option to step 2 in early-kdump-howto.txt
  - Doc: Fix typo in early-kdump-howto.txt
  - Remove adjust_bind_mount_path call
  - No longer treat atomic/silverblue specially
  - mkdumprd: Simplify handling of user specified target
  - mkdumprd: Use get_save_path instead of parsing config
  - Remove is_dump_target_configured
  - Always use get_save_path to get the 'path' option
  - kdump-lib: Don't abuse echo, and clean up
  - mkdumprd: Fix dracut args parsing
  - mkdumprd: simplify dracut args parsing


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-21
changelog:
  - Don't inherit swiotlb parameter form 1st kernel by default
  - Add a new option 'rd.znet_ifname' in order to use it in udev rules
  - kdump.sysconfig: Remove the option 'log_buf_len' from kdump command line
  - kdump-error-handler.service: Remove ExecStopPost
  - module-setup.sh: Add "rd.neednet" parameter if network is needed


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-25
changelog:
  - kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface
  - dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d}
  - kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d}
  - dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-26
changelog:
  - Fix kdump failure when mount target specified by dracut_args
  - mkdumprd: Fix dracut error on multiple extra_modules


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-28
changelog:
  - mkdumprd: Fix nfs detection in to_mount
  - Always wrap up call to dracut get_persistent_dev function
  - man: improve description about /etc/kdump/{pre.d,post.d}interface


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-30
changelog:
  - x86_64: enable the kexec file load by default
  - Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default"


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-31
changelog:
  - ppc64/kdump: use kexec_file_load when secureboot is enabled
  - kdump_pre: make notes more precise
  - dracut-kdump.sh: exit shell when machine reboot
  - kdump.conf: fix a grammar issue
  - kdumpctl: detect modification of scripts by its directory's timestamp
  - module-setup.sh: suppress false alarm
  - kexec-tools.spec: make the existence of pre.d and post.d mandatory


author: Chunmei Xu <xuchunmei@linux.alibaba.com> - 2.0.21-1.1
changelog:
  - rebase kexec-tools to 2.0.21
  - rebase makedumpfile to 1.6.8
  - makedumpfile: support for lockless ringbuffer of printk
  - makedumpfile: support use 'TCR_EL1.T1SZ' to determine va bits
  - makedumpfile: support read register ID_AA64MMFR2_EL1 to get va bits


author: Weitao Zhou <zhouwt@linux.alibaba.com> - 2.0.21-1.2
changelog:
  - rebase makedumpfile to 1.6.9
  - makedumpfile: migrate to RHEL solution on support for ARMv8.2 LVA 52 bit


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-52
changelog:
  - Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
  - Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
  - mkdumprd: display the absolute path of dump location in the check_user_configured_target()


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-53
changelog:
  - check for invalid physical address of /proc/kcore when making ELF dumpfile
  - check for invalid physical address of /proc/kcore when finding max_paddr
  - fix format issue in find_online_znet_device
  - check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
  - kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-54
changelog:
  - kdump/ppc64: rebuild initramfs image after migration
  - Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand
  - kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline


author: David Howells <dhowells@redhat.com> - 1.5.10-1
changelog:
  - Include sys/types.h in keyutils.h.
  - The dns resolver needs limits.h.
  - Overhaul of all manual pages.
  - Some manual pages moved to Linux man-pages project.
  - Add Diffie-Helman keyctl function.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-10
changelog:
  - weak-modules: group modules on add-kernel
  - weak-modules: do not make groups if there are no extra modules
    Resolves: rhbz#1649211


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-16
changelog:
  - weak-modules: update_modules_for_krel: always finish sandbox
  - weak-modules: groupping: use dependencies of extra/ provider
    Resolves: rhbz#1778889


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.11-78
changelog:
  - Introduced new memory size parameter values for UDS indexes which have
    been converted from vdo script management to LVM.
  - Resolves: rhbz#1928284


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.41-78
changelog:
  - Fixed bugs in reading the UDS index of a VDO volume which was converted
    to LVM.
  - Resolves: rhbz#1928284


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.62-79
changelog:
  - Fixed chapter computation for a converted sparse index.
  - Resolves: rhbz#1965516
  - Fixed invalidation of converted chapters.
  - Resolves: rhbz#1966818
  - Removed extraneous fields from the super block of a converted index.
  - Resolves: rhbz#1965546
  - Fixed calculation of the number of expiring chapters in a converted
    index.
  - Resolves: rhbz#1975546
  - Fixed bugs rebuilding a converted index.
  - Resolves: rhbz#1966824


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.65-79
changelog:
  - Removed unneeded allocations from the previous fixes for rebuilding
    a converted index.
  - Resolves: rhbz#1966824


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.72-79
changelog:
  - Fixed a bug which could result in the UDS index issuing I/O while
    suspended.
  - Resolves: rhbz#1990180


author: Julien Thierry <jthierry@redhat.com> 0.9.2-2
changelog:
  - Fix unload issue under stress (rhbz#1883238)
  - Fix dnf-kpatch man file permissions (rhbz#1899341)
  - Do not replace dnf kpatch configuration file when reinstalling (rhbz#1898191)


author: Jiri Olsa <jolsa@redhat.com> - 0.9.9-1
changelog:
  - updating to version 0.9.9
  - Resolves: #881654
  - Resolves: #1028410
  - Resolves: #1045025
  - Resolves: #1045368
  - Resolves: #1045388


author: Stanislav Kozina <skozina@redhat.com> - 0.9.15-1
changelog:
  - always load whitelist file from kernel-abi-whitelists package, remove the attached files
  - always load Module.symvers file from kernel-devel package, remove attached files
  - use python-bugzilla instead of private bz_xmlrpc package
  - Resolves: #1328384
  - Resolves: #906664
  - Resolves: #906659
  - Resolves: #1272348


author: Stanislav Kozina <skozina@redhat.com> - 0.9.17-1
changelog:
  - Add -y option to provide path to the Module.symvers file
  - Resolves: #1366929
  - Resolves: #1366952


author: Stanislav Kozina <skozina@redhat.com> - 0.9.19-1
changelog:
  - Resolves: #1432864
  - Resolves: #1500383
  - Resolves: #1502930
  - Resolves: #1503526
  - Resolves: #1503603
  - Resolves: #1503964
  - Resolves: #1499249
  - Resolves: #1441455
  - Resolves: #1481310
  - Resolves: #1456140


author: Cestmir Kalina <ckalina@redhat.com> - 1.1-1
changelog:
  - Replace the Python interpreter path to RHEL8 compliant path.
  - Related: #1633691
  - Resolves: #1637594


author: Cestmir Kalina <ckalina@redhat.com> - 1.3-1
changelog:
  - Resolves: #1642134 Error restrict bugs to groups without permission while
    trying to submit RHEL8 symbols
  - New ksc reports will no longer be submitted under redhat bugzilla group.
  - At least one bugzilla group must be specified by a ksc user, otherwise ksc
    will terminate with an error.
  - Version bump to 1.3


author: Cestmir Kalina <ckalina@redhat.com> - 1.4-1
changelog:
  - Resolves: #1643187 ksc manpage lies -k can only be specified once
  - Resolves: #1645335 FILE is shown in ksc man page but no explain or effect
  - Support for multiple -k arguments added
  - Man page reworded to match ksc behaviour


author: Čestmír Kalina <ckalina@redhat.com> - 1.5-1
changelog:
  - Resolves: #1647528 ksc add feature to copy justifications between ksc...
  - Resolves: #1648026 ksc add a non-processed .ko file
  - Resolves: #1647974 piped input causes ksc to fail when asking for user input
  - Add support for justification carry over.
  - Add support for symbol filtering using -K.
  - Fix input problems when piping through to ksc.
  - Extend manpage with EXAMPLES section.
  - Version bump fo 1.5.


author: Čestmír Kalina <ckalina@redhat.com> - 1.6-1
changelog:
  - Resolves: #1729039 Extend ksc output to include environment metadata
  - Add modinfo vermagic field to the output.
  - Add kmod (provides modinfo) to requires.


author: Čestmír Kalina <ckalina@redhat.com> - 1.6-2
changelog:
  - Resolves: #1729039 Extend ksc output to include environment metadata
  - (OSCI) Add kmod to Makefile-generated Requires


author: Čestmír Kalina <ckalina@redhat.com> - 1.7-1
changelog:
  - Resolves: #1886901 Avoid divisive language
  - Resolves: #1912506 File bugs with Tracking keyword by default


author: Jakub Hrozek <jhrozek@redhat.com> - 1.5.4-1
changelog:
  - Resolves: rhbz#1684582 - Rebase libldb to version 1.5.4 for Samba
  - Resolves: rhbz#1567115 - libldb: Drop Python 2 subpackages from RHEL 8
  - Resolves: rhbz#1597243 - libldb uses Python 2 to build.


author: Jakub Hrozek <jhrozek@redhat.com> - 1.5.4-2
changelog:
  - Fix some python2-related upgrade issues
  - Related: rhbz#1567115 - libldb: Drop Python 2 subpackages from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 2.0.7-3
changelog:
  - Resolves: rhbz#1754423 - Rebase libldb to 2.0.7 version for samba
  - Related: rhbz#1754423 - Fix sssd tests (ldb)


author: Isaac Boukris <iboukris@redhat.com> - 2.2.0-1
changelog:
  - Resolves: rhbz#1878114 - Rebase libldb to the version required by Samba
  - Resolves: rhbz#1794349 - Build libldb with lmdb support


author: Andreas Schneider <asn@redhat.com> - 2.3.0-1
changelog:
  - resolves: rhbz#1945021 - Update to version 2.3.0
  - resolves: rhbz#1897082 - Fix libldb tests on aarch64


author: Jeff Moyer <jmoyer@redhat.com> - 0.3.110-12.el8
changelog:
  - Pass in the distro-provided CFLAGS and LFLAGS. (Jeff Moyer)
  - Get rid of -nostartfiles -nostdlib (Jeff Moyer)
  - Resolves: rhbz#1630578


author: Richard Hughes <richard@hughsie.com> 0.7.8-1
changelog:
  - New upstream release
  - Add as_version_string() for fwupd
  - Add support for component agreements
  - Correctly compare version numbers like '1.2.3' and '1.2.3a'
  - Don't include the path component in the name when parsing the package filename
  - If the launchable is specified don't guess it when composing
  - Never add more than one component to the AppStream store when composing


author: Richard Hughes <richard@hughsie.com> 0.7.9-1
changelog:
  - New upstream release
  - Convert local icons found in metainfo files
  - Follow the Debian tilde usage when ordering versions
  - Use the launchable to find the desktop filename


author: Richard Hughes <richard@hughsie.com> 0.7.10-1
changelog:
  - New upstream release
  - Do not parse firmware files anymore
  - Do not require a release transaction when validating in relaxed mode
  - Extract release descriptions and agreement sections for translation


author: Richard Hughes <richard@hughsie.com> 0.7.11-1
changelog:
  - New upstream release
  - Add AS_APP_QUIRK_DEVELOPER_VERIFIED
  - Escape quotes in attributes
  - Provide async variants of store load functions


author: Richard Hughes <richard@hughsie.com> 0.7.13-1
changelog:
  - New upstream release
  - Do not restrict the maximum number of releases allowed
  - Throw an error when a launchable desktop-id is invalid


author: Richard Hughes <richard@hughsie.com> 0.7.14-1
changelog:
  - New upstream release
  - Add new API for gnome-software
  - Set the AppStream ID from the X-Flatpak desktop key


author: Marek Polacek <polacek@redhat.com> 8.4.1-1
changelog:
  - update from GCC 8.4 release (#1868446)
  - remove symlinks to 32-bit versions of these static libraries: libasan.a,
    libitm.a, libquadmath.a, libubsan.a, libgfortran.a (#1779597)


author: Marek Polacek <polacek@redhat.com> 8.5.0-2
changelog:
  - revert upstream PR85873 gcc-8 fix, apply the fix from gcc-9 (#1960701)
  - fix 'this' adjustment for devirtualized call (PR c++/100797, #1965951)


author: Karel Zak <kzak@redhat.com> 2.32.1-23
changelog:
  - fix #1826251 - remove MD metadata 0.90 based tests from util-linux CI
  - fix #1812576 - RFE: Bitlocker detection for RHEL 8.3
  - fix #1817726 - add libblkid BLOCK_SIZE
  - fix #1803753 - RHEL-8: col struct char_str c_column field should be of unsigned type and/or larger than 16 bit
  - fix #1812118 - mount -a always tries to mount smb3 share subdir despite being already mounted
  - fix #1824727 - util-linux: Include python3-libmount package in the release
  - fix #1829245 - mount -a tries to mount already mounted cifs shares when we cannot query up to root dir


author: Karel Zak <kzak@redhat.com> 2.32.1-25
changelog:
  - fix #1884194 - RHEL-8: chrt command does not support the -R option
  - fix #1855759 - mount.8: clarify (no)suid behavior on file capabilities
  - fix #1861670 - lsblk can not show serial information for virtio disk
  - fix #1883783 - lscpu: avoid segfault on PowerPC systems with valid hardware configurations
  - fix #1900498 - libfdisk/libmount: backport two patches for upstream systemd
  - fix #1883056 - lscpu support for Fujitsu A64FX
  - fix #1882740 - lscpu: use SMBIOS Type 4 strings for CPU vendor and model on ARM


author: Karel Zak <kzak@redhat.com> 2.32.1-28
changelog:
  - fix #1906157 - after su from root to a normal user mesg is unable to show current status
  - fix #1917852 - findmnt: add option to list all fs-independent flags
  - fix #1922299 - throws error using /sbin/nologin: invalid option -- 'c'
  - fix #1940607 - lsblk sometimes returns block devices in wrong order with --pairs
  - fix #1919529 - [RFE] RHEL-8: Support option flags with mount(8) --bind
  - fix #1946921 - RHEL8: mount --rbind -o rprivate doesn't do recursive bind mount


author: Zoltan Fridrich <zfridric@redhat.com> - 2.26-5
changelog:
  - added CAP_PERFMON, CAP_BPF and CAP_CHECKPOINT_RESTORE capabilities
    resolves: rhbz#1946982 rhbz#1921576


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.7.8-6
changelog:
  - Python 2 binary package renamed to python2-libcap-ng
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Nikola Forró <nforro@redhat.com> - 0.41-17
changelog:
  - backport several upstream fixes
  - set Delegate property for cgconfig service to make sure complete
    cgroup hierarchy is always created by systemd


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.1.16-1
changelog:
  - Update to 0.1.16
  - Make inline function __comps_objmrtree_all also static (RhBug:1793424)
  - Fix memory leaks and resource leaks
  - Fix: Check result "comps_parse_parsed_init()"


author: Jindrich Luza <jluza@redhat.com> 0.1.2
changelog:
  - automatic changelog system
  - fixed issue #14
  - libcomps.Dict is now behave more like python dict. Implemented iter(libcomps.Dict)
  - libcomps.iteritems() and libcomps.itervalues()
  - remaked error reporting system.
  -     libcomps.Comps.fromxml_f and libcomps.Comps.fromxml_str now return
  -     -1, 0 or 1. 0 means parse procedure completed without any problem,
  -     1 means there's some errors or warnings but not fatal. -1 indicates
  -     fatal error problem (some results maybe given, but probably incomplete
  -     and invalid)
  - errors catched during parsing can be obtained by calling
  -     libcomps.Comps.get_last_parse_errors
  - all log is given by
  -     libcomps.Comps.get_last_parse_log
  - prop system complete
  - fixed issue 1
  - fixed issue 3
  - added <packagereq requires=...> support
  - new prop system in progress....
  - separated doc package
  - some minor fixes in CMakeFiles
  - improved integrated tests


author: Jindrich Luza <jluza@redhat.com> 0.1.3
changelog:
  - finished default attribute support in groupid object
  - Comps.get_last_parse_errors and Comps.get_last_parse_log has been renamed
  -   as Comps.get_last_errors and Comps.get_last_log
  - finished default attribute support in groupid object
  - Comps.get_last_parse_errors and Comps.get_last_parse_log has been renamed
  -   as Comps.get_last_errors and Comps.get_last_log


author: Jindrich Luza <jluza@redhat.com> 0.1.4
changelog:
  - added missing files
  - architectural redesign finished
  - fixed #1003986 by Gustavo Luiz Duarte guidelines (but not tested on ppc)
  - fixed bug #1000449
  - fixed bug #1000442
  - added GroupId.default test
  - some minor unreported bugs discovered during testing fixed
  - finished default attribute support in groupid object
  - Comps.get_last_parse_errors and Comps.get_last_parse_log has been renamed
  -   as Comps.get_last_errors and Comps.get_last_log
  - version bumped. Python bindings is now easier.
  - added missing files


author: Jindrich Luza <jluza@redhat.com> 0.1.5
changelog:
  - version bump
  - PyCOMPS_Sequence.__getitem__["objectid"] implemented for libcomps.GroupList, libcomps.CategoryList, libcomps.EnvList
  - added missing files
  - missing display_order fix for libcomps.Environment


author: Jindrich Luza <jluza@redhat.com> 0.1.4-4
changelog:
  - group.uservisible is true by default now.
  - fixed comps_mobjradix parent node problem
  - implemented bindings for blacklist, whiteout and langpacks
  - COMPS_Logger redesigned


author: Jindrich Luza <jluza@redhat.com> 0.1.6
changelog:
  - version bumped
  - added libcomps.MDict.keys()
  -         libcomps.MDict.values()
  -         libcomps.MDict.items()
  -         libcomps.MDict.clear()
  -         libcomps.MDict.update()
  -         libcomps.MDict.copy()
  - COMPS_List replaced with COMPS_HSList
  - added missing basearchonly to DocGroupPackage
  - python3/CMakeLists.txt fixed
  - added explicit attributes support for xml options
  - added arch_filter test for python
  - insert method in libcomps.Sequence
  - Unioning is now accomplished with replace x append policy
  - Weaker package equality check (comparing only name now)
  - Fixed leeks in unioning
  - modified test_merge_comps test_libcomps
  - dictionaries are now storing keys in alphabetical order
  - comps parser redesigned
  - change python/tests directory composition
  - added elem attributes check in parser
  - xml output '_arch' attribute support
  - parser and xml output defaults options for specify defaults values
  - comps object validation in python
  - added validity checker before append/set object to list (python only)
  - .validate() method
  - added libcomps.Dict.keys
  -         libcomps.Dict.values
  -         libcomps.Dict.items
  -         libcomps.Dict.clear
  -         libcomps.Dict.update
  -         libcomps.Dict.copy
  - added xml output options (comps.xml_str([options = {}]), comps.xml_f(options = {}))


author: Jindrich Luza <jluza@redhat.com> 0.1.7
changelog:
  - added langpacks to union process
  - comps DOCTYPE read-write-read fix
  - support biarchonly attribute
  - fixed rhbz#1073885 rhbz#1073890 rhbz#1073907 rhbz#1073979
  - fix rhbz#1073079
  - comps_*_match() now support fnmatching
  - added libpycomps.MATCH_IGNORECASE as matching flag
  - added group.packages_match
  - added comps.groups_match, comps.categories_match, comps.entironments_match
  - PyCOMPS_Package hash
  - cmake-2.6, python-2.6, RHEL-6 compatible
  - '_arch' attribute change to 'arch'
  - empty 'arch' attribute will be ommited from output from now


author: Kalev Lember <klember@redhat.com> - 0.6.9-1
changelog:
  - Update to 0.6.9
  - Use make_install macro
  - Mark COPYING and COPYING.LIB as %license
  - Tighten -devel subpackage deps


author: Filip Januš <fjanus@redhat.com> 5.3.28-42
changelog:
  - Apply the previous change only on aarch64 to limit the risk of unwanted impact
  - Resolves: #1992402


author: Nicola Sella <nsella@redhat.com> - 0.55.0-3
changelog:
  - Avoid multilib file conflict in config.h (RhBug:1918818)
  - [modules] Add special handling for src artifacts (RhBug:1809314)


author: Nicola Sella <nsella@redhat.com> - 0.55.0-4
changelog:
  - [context] improve retrieving repository configuration
  - Allow loading incomplete cache and loading ext solv files without its repodata


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.63.0-1
changelog:
  - Update to 0.62.0
  - Hardening: add signature check with rpmcliVerifySignatures (RhBug:1932079)
  - Support allow_vendor_change setting in dnf context API
  - Add a new option module_obsoletes
  - Add new API applyObsoletes() function to apply modular obsoletes
  - Do not allow 1 as installonly_limit value (RhBug:1926261)
  - Add a config option to check TLS certificate revocation status (using OCSP stapling), defaults to false (RhBug:1814383)
  - Swdb: Add a method to get the current transaction
  - [context,API] Functions for accessing main/global configuration options
  - [context,API] Function for adding setopt
  - Add getter for modular obsoletes from ModuleMetadata
  - Add ModulePackage.getStaticContext() and getRequires()
  - Fix modular queries with the new solver
  - Fix: Fully set ssl in newHandle function
  - [conf] Add options for working with certificates used with proxy
  - Modify module NSVCA parsing - context definition (RhBug:1926771)
  - [context] Fix: dnf_package_is_installonly (RhBug:1928056)
  - Add getApplicablePackages to advisory and isApplicable to advisorymodule
  - Keep isAdvisoryApplicable to preserve API
  - [context] Support config file option "proxy_auth_method", defaults "any"
  - Support main config file options "installonlypkgs" and "protected_packages". Changes behaviour of microdnf and PackageKit.
  - Properly handle multiple collections in updateinfo.xml (RhBug:1804234)
  - Fix a crash when [media] section in .treeinfo is missing for bootable media (RhBug:1946024)
  - Add new dnf_context_module_install() C API


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.63.0-2
changelog:
  - Fix: dnf_context_module_install: memory leaks
  - covscan: remove unused vars, mark private func static, return values
  - DNF does not fail on non UTF-8 file names in a package


author: Jerry James <loganjerry@gmail.com> - 3.1-23.20170329cvs
changelog:
  - Add gcc BR
  - Build verbosely
  - Drop obsolete --enable-widec configure option
  - Fix "unused direct shared library dependency" warning from rpmlint again
  - Fix man page error due to BSD nroff macro that is not available on Linux
  - Drop explicit R on pkgconfig from the -devel package, autogenerated


author: Vishal Vijayraghavan <vishalvijayraghavan AT gmail DOT com> - 1:2.00.3-1
changelog:
  - Resolves: rhbz#1614529
  - Updated the BuildRequires to python3 and using latest build
  - Changed the upstream URL


author: Vishal vijayraghavan <vishalvijayraghavan AT gmail DOT com> - 1:2.00.3-4
changelog:
  - Resolves: rhbz#1643920: Removed Obsoletes: liberation-narrow-fonts and Provides: liberation-narrow-fonts macro


author: Vishal Vijayraghavan <vvijayra@redhat.com> - 1:2.00.3-6
changelog:
  - Resolves: #1664501 - liberation-fonts-common contains fonts.dir
  - Splitted the font family(mono, sans and serif) into diferrent root font directories


author: Honggang Li <honli@redhat.com> - 1.11.1-1
changelog:
  - Rebase to upstream release v1.11.1
  - EFA Support requires libfabric
  - Resolves: bz1831145, bz1852636


author: Richard Hughes <richard@hughsie.com> - 1.0-1
changelog:
  - New upstream release
  - This fixes the security bug known as CVE-2018-5345
  - Add new API for fwupd
  - Do not encode timezone in generated files
  - Fix countless memory leaks when parsing corrupt files
  - Fix the calculation of the checksum on big endian machines
  - Switch to the Meson buildsystem


author: Tomáš Mráz <tmraz@redhat.com> 1.8.3-2
changelog:
  - make only_urandom a default in non-presence of configuration file
  - run the full FIPS selftests only when the library is called from
    application


author: Tomáš Mráz <tmraz@redhat.com> 1.8.3-3
changelog:
  - add CMAC selftest for FIPS POST
  - add continuous FIPS entropy test
  - disable non-approved FIPS hashes in the enforced FIPS mode


author: Tomáš Mráz <tmraz@redhat.com> 1.8.5-3
changelog:
  - new upstream version 1.8.5
  - AES performance improvements backported from master branch
  - FIPS module is implicit with kernel FIPS flag
  - always run the FIPS selftests if FIPS module is installed


author: Jakub Jelen <jjelen@redhat.com> - 1.8.5-6
changelog:
  - Fix for CVE-2021-33560 (#1971421)
  - Enable HW optimizations in FIPS (#1976137)
  - Performance enchancements for ChaCha20 and Poly1305 (#1855231)


author: Richard Hughes <richard@hughsie.com> 0.2.10-1
changelog:
  - New upstream version
  - Correctly detect removed devices when rescanning
  - Fix a memory leak when using control tranfers
  - Fix symbol version table up to version 0.2.9


author: Rafael Aquini <aquini@redhat.com> - 2.21-4
changelog:
  - Fix: task-size-overrun hung over 8 hours on ppc64le (1737370)
  - Introduce libhugetlbfs-tests subpkg for CI tests (1688930)


author: Rafael Aquini <aquini@redhat.com> - 2.21-12
changelog:
  - Fix: Introduce libhugetlbfs-tests subpkg for CI tests (1688930)
  - trim repetitive changelogs for interim debug builds


author: Rafael Aquini <aquini@redhat.com> - 2.21-13
changelog:
  - Fix: huge_page_setup_helper.py: SyntaxError: Missing parentheses in call to 'print' (1821938)
  - libhugetlbfs-tests: harden the testcases to satisfy EXECSHIELD RPMDiff checks (1785296)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.0-1
changelog:
  - Resolves: rhbz#1947671 - Rebase SSSD for RHEL 8.5
  - Resolves: rhbz#1930535 - [abrt] [faf] sssd: monitor_service_shutdown(): /usr/sbin/sssd killed by 11
  - Resolves: rhbz#1942387 - Wrong default debug level of sssd tools
  - Resolves: rhbz#1945888 - Inconsistant debug level for connection logging
  - Resolves: rhbz#1948657 - pam_sss_gss.so doesn't work with large kerberos tickets
  - Resolves: rhbz#1949149 - [RFE] Poor man's backtrace
  - Resolves: rhbz#1920500 - Authentication handshake (ldap_install_tls()) fails due to underlying openssl operation failing with EINTR
  - Resolves: rhbz#1923964 - [RFE] SSSD Error Msg Improvement: write_krb5info_file failed, authentication might fail.
  - Resolves: rhbz#1928648 - SSSD logs improvements: clarify which config option applies to each timeout in the logs
  - Resolves: rhbz#1632159 - sssd-kcm starts successfully for non existent socket_path
  - Resolves: rhbz#1627112 - RFE: Kerberos ticket renewal for sssd-kcm
  - Resolves: rhbz#1925505 - [RFE] improve the sssd refresh timers for SUDO queries
  - Resolves: rhbz#1925514 - [RFE] Randomize the SUDO timeouts upon reconnection
  - Resolves: rhbz#1925561 - sssd-ldap(5) does not report how to disable the SUDO smart queries
  - Resolves: rhbz#1925621 - document impact of indices and of scope on performance of LDAP queries
  - Resolves: rhbz#1855320 - [RFE] RHEL8 sssd: inheritance of the case_sensitive parameter for subdomains.
  - Resolves: rhbz#1925608 - [RFE] make 'random_offset' addon to 'offline_timeout' option configurable
  - Resolves: rhbz#1447945 - man page / docs update required: if two certificate matching rules with the same priority match only one is used
  - Resolves: rhbz#1703436 - sssd not thread-safe in innetgr()
  - Resolves: rhbz#1713143 - SSSD does not translate the 2FA text labels("first factor" / "second factor") on GDM login and screensaver unlock screen
  - Resolves: rhbz#1888977 - sss_override: Usage limitations clarification in man page
  - Resolves: rhbz#1890177 - Clarify "single_prompt" option in "PROMPTING CONFIGURATION SECTION" section of sssd.conf man page
  - Resolves: rhbz#1902280 - fix sss_cache to also reset cached timestamp
  - Resolves: rhbz#1935683 - SSSD not detecting subdomain from AD forest (RHEL 8.3)
  - Resolves: rhbz#1937919 - IPA missing secondary IPA Posix groups in latest sssd 1.16.5-10.el7_9.7
  - Resolves: rhbz#1944665 - No gpo found and ad_gpo_implicit_deny set to True still permits user login
  - Resolves: rhbz#1919942 - sss_override does not take precedence over override_homedir directive


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.1-1
changelog:
  - Resolves: rhbz#1947671 - Rebase SSSD for RHEL 8.5
  - Resolves: rhbz#1942387 - Wrong default debug level of sssd tools
  - Resolves: rhbz#1917444 - SSSD Error Msg Improvement: Server resolution failed: [2]: No such file or directory
  - Resolves: rhbz#1917511 - SSSD Error Msg Improvement: Failed to resolve server 'server.example.com': Error reading file
  - Resolves: rhbz#1917535 - sssd.conf man page: parameter dns_resolver_server_timeout and dns_resolver_op_timeout
  - Resolves: rhbz#1940509 - [RFE] Health and Support Analyzer: Link frontend to backend requests
  - Resolves: rhbz#1649464 - auto_private_groups not working as expected with posix ipa/ad trust
  - Resolves: rhbz#1925514 - [RFE] Randomize the SUDO timeouts upon reconnection
  - Resolves: rhbz#1961215 - Invalid sssd-kcm return code if requested operation is not found
  - Resolves: rhbz#1837090 - SSSD fails nss_getby_name for IPA user with SID if the user has user private group
  - Resolves: rhbz#1879869 - sudo commands incorrectly exports the KRB5CCNAME environment variable
  - Resolves: rhbz#1962550 - sss_pac_make_request fails on systems joined to Active Directory.
  - Resolves: rhbz#1737489 - [RFE] SSSD should honor default Kerberos settings (keytab name) in /etc/krb5.conf


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.1-2
changelog:
  - Resolves: rhbz#1974257 - 'debug_microseconds' config option is broken
  - Resolves: rhbz#1936902 - SSSD Error Msg Improvement: Invalid argument
  - Resolves: rhbz#1627112 - RFE: Kerberos ticket renewal for sssd-kcm (additional patches and rebuild)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-1
changelog:
  - Resolves: rhbz#1947671 - Rebase SSSD for RHEL 8.5
  - Resolves: rhbz#1693379 - sssd_be and sss_cache too heavy on CPU
  - Resolves: rhbz#1909373 - Missing search index for `originalADgidNumber`
  - Resolves: rhbz#1954630 - [RFE] Improve debug messages by adding a unique tag for each request the backend is handling
  - Resolves: rhbz#1936891 - SSSD Error Msg Improvement: Bad address
  - Resolves: rhbz#1364596 - sssd still showing ipa user after removed from last group
  - Resolves: rhbz#1979404 - Changes made to /etc/pam.d/sssd-shadowutils are overwritten back to default on sssd-common package upgrade


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2
changelog:
  - Resolves: rhbz#1975169 - EMBARGOED CVE-2021-3621 sssd: shell command injection in sssctl [rhel-8]
  - Resolves: rhbz#1962042 - [sssd] RHEL 8.5 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.1
changelog:
  - Resolves: rhbz#2014460 - tps tests fail with cross dependency on sssd debuginfo package: removal of 'sssd-libwbclient-debuginfo' is missing [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.2
changelog:
  - Resolves: rhbz#2018440 - 2.5.x based SSSD adds more AD domains than it should based on the configuration file (not trusted and from a different forest) [rhel-8.5.0.z]
  - Resolves: rhbz#2016923 - autofs lookups for unknown mounts are delayed for 50s [rhel-8.5.0.z]
  - Resolves: rhbz#2021499 - Make backtrace less "chatty" (avoid duplicate backtraces) [rhel-8.5.0.z]
  - Resolves: rhbz#2013379 - Lookup with fully-qualified name does not work with 'cache_first = True' [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.3
changelog:
  - Resolves: rhbz#2028828 - pam responder does not call initgroups to refresh the user entry [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.4
changelog:
  - Resolves: rhbz#2030651 - sssd-kcm has requirement on krb5 symbol "krb5_unmarshal_credentials" only available in latest RHEL8.5 krb5 libraries [rhel-8.5.0.z]
  - Resolves: rhbz#2035285 - AD Domain in the AD Forest Missing after sssd latest update [rhel-8.5.0.z]


author: Simo Sorce <ssorce@redhat.com> - 0.3.0-2
changelog:
  - Try to fix build adding automake as an explicit BuildRequire
  - Add also a couple of last minute patches from upstream


author: Jakub Hrozek <jhrozek@redhat.com> - 0.3.2-1
changelog:
  - bugfix release 0.3.2
  - includes previous release patches
  - change permissions of the /etc/sssd/sssd.conf to 0600


author: Simo Sorce <ssorce@redhat.com> - 0.4.1-1
changelog:
  - add missing configure check that broke stopping the daemon
  - also fix default config to add a missing required option


author: Jakub Hrozek <jhrozek@redhat.com> - 0.4.1-4
changelog:
  - Fix for CVE-2009-2410 - Native SSSD users with no password set could log in
    without a password. (Patch by Stephen Gallagher)


author: Stephen Gallagher <sgallagh@redhat.com> - 0.6.0-1
changelog:
  - Ensure that the configuration upgrade script always writes the config
    file with 0600 permissions
  - Eliminate an infinite loop in group enumerations


author: Stephen Gallagher <sgallagh@redhat.com> - 0.6.1-1
changelog:
  - Add SSSDConfig API
  - Update polish translation for 0.6.0
  - Fix long timeout on ldap operation
  - Make dp requests more robust


author: Stephen Gallagher <sgallagh@redhat.com> - 0.7.1-1
changelog:
  - Fix segfault in sssd_pam when cache_credentials was enabled
  - Update the sample configuration
  - Fix upgrade issues caused by data provider service removal


author: Stephen Gallagher <sgallagh@redhat.com> - 1.0.2-1
changelog:
  - Fixes a bug in the failover code that prevented the SSSD from detecting when it went back online
  - Fixes a bug causing long (sometimes multiple-minute) waits for NSS requests
  - Several segfault bugfixes


author: Stephen Gallagher <sgallagh@redhat.com> - 1.0.3-1
changelog:
  - Fixes link error on platforms that do not do implicit linking
  - Fixes double-free segfault in PAM
  - Fixes double-free error in async resolver
  - Fixes support for TCP-based DNS lookups in async resolver
  - Fixes memory alignment issues on ARM processors
  - Manpage fixes


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.0-1.pre20100317git0ea7f19
changelog:
  - Release candidate for SSSD 1.1
  - Add simple access provider
  - Create subpackages for libcollection, libini_config, libdhash and librefarray
  - Support IPv6
  - Support LDAP referrals
  - Fix cache issues
  - Better feedback from PAM when offline


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.0-2
changelog:
  - Release SSSD 1.1.0 final
  - Fix two potential segfaults
  - Fix memory leak in monitor
  - Better error message for unusable confdb


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.1-1
changelog:
  - New upstream release 1.1.1
  - Fixed the IPA provider (which was segfaulting at start)
  - Fixed a bug in the SSSDConfig API causing some options to revert to
  - their defaults
  - This impacted the Authconfig UI
  - Ensure that SASL binds to LDAP auto-retry when interrupted by a signal


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.91-10
changelog:
  - Release new upstream version 1.1.91
  - Enhancements when using SSSD with FreeIPA v2
  - Support for deferred kinit
  - Support for DNS SRV records for failover


author: Stephen Gallagher <sgallagh@redhat.com> - 1.1.92-11
changelog:
  - New LDAP access provider allows for filtering user access by LDAP attribute
  - Reduced default timeout for detecting offline status with LDAP
  - GSSAPI ticket lifetime made configurable
  - Better offline->online transition support in Kerberos


author: Stephen Gallagher <sgallagh@redhat.com> - 1.2.0-12
changelog:
  - New stable upstream version 1.2.0
  - Support ServiceGroups for FreeIPA v2 HBAC rules
  - Fix long-standing issue with auth_provider = proxy
  - Better logging for TLS issues in LDAP


author: Stephen Gallagher <sgallagh@redhat.com> - 1.2.1-15
changelog:
  - New stable upstream version 1.2.1
  - Resolves: rhbz#595529 - spec file should eschew %define in favor of
  -                         %global
  - Resolves: rhbz#593644 - Empty list of simple_allow_users causes sssd service
  -                         to fail while restart.
  - Resolves: rhbz#599026 - Makefile typo causes SSSD not to use the kernel
  -                         keyring
  - Resolves: rhbz#599724 - sssd is broken on Rawhide


author: Stephen Gallagher <sgallagh@redhat.com> - 1.2.91-20
changelog:
  - New upstream version 1.2.91 (1.3.0rc1)
  - Improved LDAP failover
  - Synchronous sysdb API (provides performance enhancements)
  - Better online reconnection detection


author: Stephen Gallagher <sgallagh@redhat.com> - 1.3.0-30
changelog:
  - Resolves: CVE-2010-2940 - sssd allows null password entry to authenticate
  -                           against LDAP


author: Stephen Gallagher <sgallagh@redhat.com> - 1.3.0-32
changelog:
  - Resolves: rhbz#637955 - libini_config-devel needs libcollection-devel but
  -                         doesn't require it


author: Stephen Gallagher <sgallagh@redhat.com> - 1.4.0-1
changelog:
  - New upstream release 1.4.0
  - Added support for netgroups to the LDAP provider
  - Performance improvements made to group processing of RFC2307 LDAP servers
  - Fixed nested group issues with RFC2307bis LDAP servers without a memberOf plugin
  - Build-system improvements to support Gentoo
  - Split out several libraries into the ding-libs tarball
  - Manpage reviewed and updated


author: Stephen Gallagher <sgallagh@redhat.com> - 1.4.1-1
changelog:
  - New upstream release 1.4.1
  - Add support for netgroups to the proxy provider
  - Fixes a minor bug with UIDs/GIDs >= 2^31
  - Fixes a segfault in the kerberos provider
  - Fixes a segfault in the NSS responder if a data provider crashes
  - Correctly use sdap_netgroup_search_base


author: Stephen Gallagher <sgallagh@redhat.com> - 1.4.1-3
changelog:
  - Solve a shutdown race-condition that sometimes left processes running
  - Resolves: rhbz#606887 - SSSD stops on upgrade


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.0-1
changelog:
  - New upstream release 1.5.0
  - Fixed issues with LDAP search filters that needed to be escaped
  - Add Kerberos FAST support on platforms that support it
  - Reduced verbosity of PAM_TEXT_INFO messages for cached credentials
  - Added a Kerberos access provider to honor .k5login
  - Addressed several thread-safety issues in the sss_client code
  - Improved support for delayed online Kerberos auth
  - Significantly reduced time between connecting to the network/VPN and
  - acquiring a TGT
  - Added feature for automatic Kerberos ticket renewal
  - Provides the kerberos ticket for long-lived processes or cron jobs
  - even when the user logs out
  - Added several new features to the LDAP access provider
  - Support for 'shadow' access control
  - Support for authorizedService access control
  - Ability to mix-and-match LDAP access control features
  - Added an option for a separate password-change LDAP server for those
  - platforms where LDAP referrals are not supported
  - Added support for manpage translations


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.1-1
changelog:
  - New upstream release 1.5.1
  - Addresses CVE-2010-4341 - DoS in sssd PAM responder can prevent logins
  - Vast performance improvements when enumerate = true
  - All PAM actions will now perform a forced initgroups lookup instead of just
  - a user information lookup
  -   This guarantees that all group information is available to other
  -   providers, such as the simple provider.
  - For backwards-compatibility, DNS lookups will also fall back to trying the
  - SSSD domain name as a DNS discovery domain.
  - Support for more password expiration policies in LDAP
  -    389 Directory Server
  -    FreeIPA
  -    ActiveDirectory
  - Support for ldap_tls_{cert,key,cipher_suite} config options
  -Assorted bugfixes


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.1-3
changelog:
  - Fix nested group member filter sanitization for RFC2307bis
  - Put translated tool manpages into the sssd-tools subpackage


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.1-8
changelog:
  - Resolves: rhbz#677768 - name service caches names, so id command shows
  -                         recently deleted users


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.2-1
changelog:
  - New upstream release 1.5.2
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.2
  - Fixes for support of FreeIPA v2
  - Fixes for failover if DNS entries change
  - Improved sss_obfuscate tool with better interactive mode
  - Fix several crash bugs
  - Don't attempt to use START_TLS over SSL. Some LDAP servers can't handle this
  - Delete users from the local cache if initgroups calls return 'no such user'
  - (previously only worked for getpwnam/getpwuid)
  - Use new Transifex.net translations
  - Better support for automatic TGT renewal (now survives restart)
  - Netgroup fixes


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.4-1
changelog:
  - New upstream release 1.5.4
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.4
  - Fixes for Active Directory when not all users and groups have POSIX attributes
  - Fixes for handling users and groups that have name aliases (aliases are ignored)
  - Fix group memberships after initgroups in the IPA provider


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.5-1
changelog:
  - New upstream release 1.5.5
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.5
  - Fixes for several crash bugs
  - LDAP group lookups will no longer abort if there is a zero-length member
  - attribute
  - Add automatic fallback to 'cn' if the 'gecos' attribute does not exist


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.5-3
changelog:
  - Fix systemd conversion. Upgrades from SysV to systemd weren't properly
  - enabling the systemd service.
  - Fix a serious memory leak in the memberOf plugin
  - Fix an issue where the user's full name would sometimes be removed
  - from the cache


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.5-5
changelog:
  - Resolves: rhbz#697057 - kpasswd fails when using sssd and
  -                         kadmin server != kdc server
  - Upgrades from SysV should now maintain enabled/disabled status


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.6-1
changelog:
  - New upstream release 1.5.6
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.6
  - Fixed a serious memory leak in the memberOf plugin
  - Fixed a regression with the negative cache that caused it to be essentially
  - nonfunctional
  - Fixed an issue where the user's full name would sometimes be removed from
  - the cache
  - Fixed an issue with password changes in the kerberos provider not working
  - with kpasswd


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.7-1
changelog:
  - Resolves: rhbz#700891 - CVE-2011-1758 sssd: automatic TGT renewal overwrites
  -                         cached password with predicatable filename


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.7-3
changelog:
  - Resolves: rhbz#706740 - Orphaned links on rc0.d-rc6.d
  - Make sure to properly convert to systemd if upgrading from newer
  - updates for Fedora 14


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.8-1
changelog:
  - New upstream release 1.5.8
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.8
  - Support for the LDAP paging control
  - Support for multiple DNS servers for name resolution
  - Fixes for several group membership bugs
  - Fixes for rare crash bugs


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.9-1
changelog:
  - New upstream release 1.5.9
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.9
  - Support for overriding home directory, shell and primary GID locally
  - Properly honor TTL values from SRV record lookups
  - Support non-POSIX groups in nested group chains (for RFC2307bis LDAP
  - servers)
  - Properly escape IPv6 addresses in the failover code
  - Do not crash if inotify fails (e.g. resource exhaustion)
  - Don't add multiple TGT renewal callbacks (too many log messages)


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.10-1
changelog:
  - New upstream release 1.5.10
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.10
  - Fixed a regression introduced in 1.5.9 that could result in blocking calls
  - to LDAP


author: Stephen Gallagher <sgallagh@redhat.com> - 1.5.11-2
changelog:
  - New upstream release 1.5.11
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.5.11
  - Fix a serious regression that prevented SSSD from working with ldaps:// URIs
  - IPA Provider: Fix a bug with dynamic DNS that resulted in the wrong IPv6
  - address being saved to the AAAA record


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.0-1
changelog:
  - New upstream release 1.6.0
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.6.0
  - Add host access control support for LDAP (similar to pam_host_attr)
  - Finer-grained control on principals used with Kerberos (such as for FAST or
  - validation)
  - Added a new tool sss_cache to allow selective expiring of cached entries
  - Added support for LDAP DEREF and ASQ controls
  - Added access control features for Novell Directory Server
  - FreeIPA dynamic DNS update now checks first to see if an update is needed
  - Complete rewrite of the HBAC library
  - New libraries: libipa_hbac and libipa_hbac-python


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.1-1
changelog:
  - New upstream release 1.6.1
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.6.1
  - Fixes a serious issue with LDAP connections when the communication is
    dropped (e.g. VPN disconnection, waking from sleep)
  - SSSD is now less strict when dealing with users/groups with multiple names
    when a definitive primary name cannot be determined
  - The LDAP provider will no longer attempt to canonicalize by default when
    using SASL. An option to re-enable this has been provided.
  - Fixes for non-standard LDAP attribute names (e.g. those used by Active
    Directory)
  - Three HBAC regressions have been fixed.
  - Fix for an infinite loop in the deref code


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.2-1
changelog:
  - Improved handling of users and groups with multi-valued name attributes
    (aliases)
  - Performance enhancements
      Initgroups on RFC2307bis/FreeIPA
      HBAC rule processing
  - Improved process-hang detection and restarting
  - Enabled the midpoint cache refresh by default (fewer cache misses on
    commonly-used entries)
  - Cleaned up the example configuration
  - New tool to change debug level on the fly


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.2-4
changelog:
  - Change selinux policy requirement to Conflicts: with the old version,
    rather than Requires: the supported version.


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.3-1
changelog:
  - New upstream release 1.6.3
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.6.3
  - Fixes a major cache performance issue introduced in 1.6.2
  - Fixes a potential infinite-loop with certain LDAP layouts


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.3-4
changelog:
  - Resolves: rhbz#753639 - sssd_nss crashes when passed invalid UTF-8 for the
                            username in getpwnam()
  - Resolves: rhbz#758425 - LDAP failover not working if server refuses
                            connections


author: Stephen Gallagher <sgallagh@redhat.com> - 1.6.4-1
changelog:
  - New upstream release 1.6.4
  - Rolls up previous patches applied to the 1.6.3 tarball
  - Fixes a rare issue causing crashes in the failover logic
  - Fixes an issue where SSSD would return the wrong PAM error code for users
    that it does not recognize.


author: Stephen Gallagher <sgallagh@redhat.com> - 1.7.0-1
changelog:
  - New upstream release 1.7.0
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.7.0
  - Support for case-insensitive domains
  - Support for multiple search bases in the LDAP provider
  - Support for the native FreeIPA netgroup implementation
  - Reliability improvements to the process monitor
  - New DEBUG facility with more consistent log levels
  - New tool to change debug log levels without restarting SSSD
  - SSSD will now disconnect from LDAP server when idle
  - FreeIPA HBAC rules can choose to ignore srchost options for significant
    performance gains
  - Assorted performance improvements in the LDAP provider


author: Stephen Gallagher <sgallagh@redhat.com> - 1.7.0-3
changelog:
  - Resolves: rhbz#773706 - SSSD fails during autodetection of search bases for
                            new LDAP features


author: Stephen Gallagher <sgallagh@redhat.com> - 1.7.0-5
changelog:
  - Resolves: rhbz#773706 - SSSD fails during autodetection of search bases for
                            new LDAP features - fix netgroups and sudo as well


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.0-1.beta1
changelog:
  - New upstream release
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.8.0beta1
  - Support for the service map in NSS
  - Support for setting default SELinux user context from FreeIPA
  - Support for retrieving SSH user and host keys from LDAP (Experimental)
  - Support for caching autofs LDAP requests (Experimental)
  - Support for caching SUDO rules (Experimental)


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.0-1.beta2
changelog:
  - New upstream release
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.8.0beta2
  - Fix two minor manpage bugs
  - Include the IPA AutoFS provider


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.0-4.beta3
changelog:
  - New upstream release 1.8.0 beta 3
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.8.0beta3
  - Fixed a regression in group enumeration since 1.7.0
  - Fixed several memory-corruption bugs
  - Finalized the ABI for the autofs support
  - Fixed a regression in the proxy provider


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.0-6
changelog:
  - New upstream release 1.8.0
  - Support for the service map in NSS
  - Support for setting default SELinux user context from FreeIPA
  - Support for retrieving SSH user and host keys from LDAP (Experimental)
  - Support for caching autofs LDAP requests (Experimental)
  - Support for caching SUDO rules (Experimental)
  - Include the IPA AutoFS provider
  - Fixed several memory-corruption bugs
  - Fixed a regression in group enumeration since 1.7.0
  - Fixed a regression in the proxy provider
  - Resolves: rhbz#741981 - Separate Cache Timeouts for SSSD
  - Resolves: rhbz#797968 - sssd_be: The requested tar get is not configured is
                            logged at each login
  - Resolves: rhbz#754114 - [abrt] sssd-1.6.3-1.fc16: ping_check: Process
                            /usr/sbin/sssd was killed by signal 11 (SIGSEGV)
  - Resolves: rhbz#743133 - Performance regression with Kerberos authentication
                            against AD
  - Resolves: rhbz#773706 - SSSD fails during autodetection of search bases for
                            new LDAP features
  - Resolves: rhbz#786957 - sssd and kerberos should change the default location for create the Credential Cashes to /run/usr/USERNAME/krb5cc


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.1-7
changelog:
  - New upstream release 1.8.1
  - Resolve issue where we could enter an infinite loop trying to connect to an
    auth server
  - Fix serious issue with complex (3+ levels) nested groups
  - Fix netgroup support for case-insensitivity and aliases
  - Fix serious issue with lookup bundling resulting in requests never
    completing
  - IPA provider will now check the value of nsAccountLock during pam_acct_mgmt
    in addition to pam_authenticate
  - Fix several regressions in the proxy provider
  - Resolves: rhbz#743133 - Performance regression with Kerberos authentication
                            against AD
  - Resolves: rhbz#799031 - --debug option for sss_debuglevel doesn't work


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.1-8
changelog:
  - Fix uninitialized value bug causing crashes throughout the code
  - Resolves: rhbz#804783 - [abrt] Segfault during LDAP 'services' lookup


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.1-9
changelog:
  - Don't duplicate libsss_autofs.so in two packages
  - Set explicit package contents instead of globbing


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.2-10
changelog:
  - New upstream release 1.8.2
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.8.2
  - Several fixes to case-insensitive domain functions
  - Fix for GSSAPI binds when the keytab contains unrelated principals
  - Fixed several segfaults
  - Workarounds added for LDAP servers with unreadable RootDSE
  - SSH knownhostproxy will no longer enter an infinite loop preventing login
  - The provided SYSV init script now starts SSSD earlier at startup and stops
    it later during shutdown
  - Assorted minor fixes for issues discovered by static analysis tools


author: Stephen Gallagher <sgallagh@redhat.com> - 1.8.3-11
changelog:
  - New upstream release 1.8.3
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.8.3
  - Numerous manpage and translation updates
  - LDAP: Handle situations where the RootDSE isn't available anonymously
  - LDAP: Fix regression for users using non-standard LDAP attributes for user
    information


author: Stephen Gallagher <sgallagh@redhat.com> - 1.9.0-1.beta1
changelog:
  - New upstream release 1.9.0 beta 1
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.9.0beta1
  - Add native support for autofs to the IPA provider
  - Support for ID-mapping when connecting to Active Directory
  - Support for handling very large (> 1500 users) groups in Active Directory
  - Support for sub-domains (will be used for dealing with trust relationships)
  - Add a new fast in-memory cache to speed up lookups of cached data on
    repeated requests


author: Stephen Gallagher <sgallagh@redhat.com> - 1.9.0-2.beta1
changelog:
  - Fix several regressions since 1.5.x
  - Ensure that the RPM creates the /var/lib/sss/mc directory
  - Add support for Netscape password warning expiration control
  - Rebuild against libldb 1.1.6


author: Stephen Gallagher <sgallagh@redhat.com> - 1.9.0-5.beta2
changelog:
  - New upstream release 1.9.0 beta 2
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.9.0beta2
  - Add support for the Kerberos DIR cache for storing multiple TGTs
    automatically
  - Major performance enhancement when storing large groups in the cache
  - Major performance enhancement when performing initgroups() against Active
    Directory
  - SSSDConfig data file default locations can now be set during configure for
    easier packaging


author: Stephen Gallagher <sgallagh@redhat.com> - 1.9.0-7.beta2
changelog:
  - Switch unicode library from libunistring to Glib
  - Drop unnecessary explicit Requires on keyutils
  - Guarantee that versioned Requires include the correct architecture


author: Stephen Gallagher <sgallagh@redhat.com> - 1.9.0-8.beta3
changelog:
  - New upstream release 1.9.0 beta 3
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.9.0beta3
  - Add a new PAC responder for dealing with cross-realm Kerberos trusts
  - Terminate idle connections to the NSS and PAM responders


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.0-9.beta4
changelog:
  - New upstream release 1.9.0 beta 4
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.9.0beta4
  - Add a new AD provider to improve integration with Active Directory 2008 R2
    or later servers
  - SUDO integration was completely rewritten. The new implementation works
    with multiple domains and uses an improved refresh mechanism to download
    only the necessary rules
  - The IPA authentication provider now supports subdomains
  - Fixed regression for setups that were setting default_tkt_enctypes
    manually by reverting a previous workaround.


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.0-12.beta5
changelog:
  - New upstream release 1.9.0 beta 5
  - Obsoletes the patch for missing DP_OPTION_TERMINATOR in AD provider options
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.9.0beta5
  - Many fixes for the support for setting default SELinux user context from
    FreeIPA, most notably fixed the specificity evaluation
  - Fixed an incorrect default in the krb5_canonicalize option of the AD
    provider which was preventing password change operation
  - The shadowLastChange attribute value is now correctly updated with the
    number of days since the Epoch, not seconds


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.0-13.beta6
changelog:
  - New upstream release 1.9.0 beta 6
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.9.0beta6
  - A new option, override_shell was added. If this option is set, all users
    managed by SSSD will have their shell set to its value.
  - Fixes for the support for setting default SELinux user context from FreeIPA.
  - Fixed a regression introduced in beta 5 that broke LDAP SASL binds
  - The SSSD supports the concept of a Primary Server and a Back Up Server in
    failover
  - A new command-line tool sss_seed is available to help prime the cache with
    a user record when deploying a new machine
  - SSSD is now able to discover and save the domain-realm mappings
    between an IPA server and a trusted Active Directory server.
  - Packaging changes to fix ldconfig usage in subpackages (#843995)
  - Rebuild against libldb 1.1.9


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.0-14.beta6
changelog:
  - Don't discard HBAC rule processing result if SELinux is on
    Resolves: rhbz#846792 (CVE-2012-3462)


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.0-18.beta6
changelog:
  - Change the default ccache location to DIR:/run/user/${UID}/krb5cc
    and patch man page accordingly
  - Resolves: rhbz#851304


author: Jakub Hrozek <jhrozek@redhat.com> - 1.9.4-3
changelog:
  - Recreate Kerberos ccache directory if it's missing
  - Resolves: rhbz#853558 - [sssd[krb5_child[PID]]]: Credential cache
                            directory /run/user/UID/ccdir does not exist


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.0-4.beta1
changelog:
  - Explicitly Require libini_config >= 1.0.0.1 to work around a SONAME bug
    in ding-libs
  - Fix SSH integration with fully-qualified domains
  - Add the ability to dynamically discover the NetBIOS name


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.0-6.beta1
changelog:
  - Resolves: rhbz#961357 - Missing dyndns_update entry in sssd.conf during
                            realm join
  - Resolves: rhbz#961278 - Login failure: Enterprise Principal enabled by
                            default for AD Provider
  - Resolves: rhbz#961251 - sssd does not create user's krb5 ccache dir/file
                            parent directory when logging in


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.0-7.beta1
changelog:
  - Apply a couple of patches from upstream git that resolve crashes when
    ID mapping object was not initialized properly but needed later


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.0-8.beta2
changelog:
  - New upstream release 1.10 beta2
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.10.0beta2
  - BuildRequire libcmocka-devel in order to run all upstream tests during build
  - BuildRequire libnl3 instead of libnl1
  - No longer BuildRequire initscripts, we no longer use /sbin/service
  - Remove explicit krb5-libs >= 1.10 requires; this platform doensn't carry any
    older krb5-libs version


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.0-9.beta2
changelog:
  - Fix typo in Requires that prevented an upgrade (#973916)
  - Use a hardcoded version in Conflicts, not less-than-current


author: Jakub Hrozek <jhrozek@redhat.com> - 1.10.0-11.beta2
changelog:
  - Apply a number of patches from upstream to fix issues found post-beta,
    in particular:
    -- segfault with a high DEBUG level
    -- Fix IPA password migration (upstream #1873)
    -- Fix fail over when retrying SRV resolution (upstream #1886)


author: Stephen Gallagher <sgallagh@redhat.com> - 1.10.0-14
changelog:
  - Fix Obsoletes: to account for dist tag
  - Convert post and pre scripts to run on the sssd-common subpackage
  - Remove old conversion from SYSV


author: Stephen Gallagher <sgallagh@redhat.com> - 1.10.0-16
changelog:
  - Move sssd_pac to the sssd-ipa and sssd-ad subpackages
  - Trim out RHEL5-specific macros since we don't build on RHEL 5
  - Trim out macros for Fedora older than F18
  - Update libldb requirement to 1.1.16
  - Trim RPM changelog down to the last year


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.0.2beta2
changelog:
  - Resolves: #906427 - Do not use %{_lib} in specfile for the nss and
                        pam libraries


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.0-0.4.beta2
changelog:
  - Resolves: #967012 - [abrt] sssd-1.9.5-1.fc18: sss_mmap_cache_gr_invalidate_gid:
                        Process /usr/libexec/sssd/sssd_nss was killed by
                        signal 11 (SIGSEGV)
  - Resolves: #996214 - sssd proxy_child segfault


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.0-2
changelog:
  - Backport simplification of ccache management from 1.11.1
  - Resolves: rhbz#1010553 - sssd setting KRB5CCNAME=(null) on login


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.0-3
changelog:
  - Fix multicast checks in the SSSD
  - Resolves: rhbz#1007475 - The multicast check is wrong in the sudo source
                             code getting the host info


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-1
changelog:
  - New upstream release 1.11.2
  - Remove upstreamed patches
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.11.2


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.3-1
changelog:
  - New upstream release 1.11.3
  - Remove upstreamed patches
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.11.3


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.4-1
changelog:
  - New upstream release 1.11.4
  - Remove upstreamed patch
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.11.4


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.5-1
changelog:
  - New upstream release 1.11.5
  - Remove upstreamed patch
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.11.5


author: Jakub Hrozek <jhrozek@redhat.com> - 1.12.1-2
changelog:
  - Resolves: rhbz#1139962 - Fedora 21, FreeIPA 4.0.2: sssd does not find user
                             private group from server


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.2-6
changelog:
  - Fix regressions and bugs in sssd upstream 1.12.2
  - https://fedorahosted.org/sssd/ticket/{id}
  - Regressions: #2471, #2475, #2483, #2487, #2529, #2535
  - Bugs: #2287, #2445


author: Sumit Bose <sbose@redhat.com> - 1.12.2-7
changelog:
  - Resolves: rhbz#1175511 - sssd-libwbclient conflicts with Samba's and causes
                             crash in wbinfo
                             - in addition to the patch libwbclient.so is
                               filtered out of the Provides list of the package


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.3-1
changelog:
  - New upstream release 1.12.3
  - https://fedorahosted.org/sssd/wiki/Releases/Notes-1.12.3
  - Fix spelling errors in description (fedpkg lint)


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.3-2
changelog:
  - Resolves: rhbz#1164156 - libsss_simpleifp should pull sssd-dbus
  - Resolves: rhbz#1179379 - gzip: stdin: file size changed while
                             zipping when rotating logfile


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.3-3
changelog:
  - Apply a number of patches from upstream to fix issues found 1.12.3
  - Resolves: rhbz#1176373 - dyndns_iface does not accept multiple
                             interfaces, or isn't documented to be able to
  - Resolves: rhbz#988068 - getpwnam_r fails for non-existing users when sssd is
                            not running
  - Resolves: upstream #2557  authentication failure with user from AD


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.3-4
changelog:
  - Decrease priority of sssd-libwbclient 20 -> 5
  - It should be lower than priority of samba veriosn of libwbclient.
  - https://bugzilla.redhat.com/show_bug.cgi?id=1175511#c18


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.3-6
changelog:
  - Fix double free in monitor
  - Resolves: rhbz#1186887 [abrt] sssd-common: talloc_abort():
                          sssd killed by SIGABRT


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.4-2
changelog:
  - Add support for python3 bindings
  - Add requirement to python3 or python3 bindings
  - Resolves: rhbz#1014594 - sssd: Support Python 3


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.4-5
changelog:
  - Fix regressions with ipa and SELinux
  - Resolves: upstream #2587 - With empty ipaselinuxusermapdefault security
                               context on client is staff_u


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.4-6
changelog:
  - Fix slow login with ipa and SELinux
  - Resolves: upstream #2624 - Only set the selinux context if the context
                               differs from the local one


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.12.4-8
changelog:
  - Backport important patches from upstream 1.13 prerelease
  - Resolves: rhbz#1060325 - Does sssd-ad use the most suitable
                             attribute for group name
  - Resolves: upstream #2335 - Investigate using the krb5 responder
                               for driving the PAM conversation with OTPs
  - Enable cmocka tests for secondary architectures


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.0-4
changelog:
  - Fix ipa-migration bug
  - Resolves: upstream #2719 - IPA: returned unknown dp error code with disabled
                               migration mode


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.0-6
changelog:
  - Fix OTP bug
  - Resolves: upstream #2729 - Do not send SSS_OTP if both factors were
                               entered separately


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.1-2
changelog:
  - Fix few segfaults
  - Resolves: upstream #2811 - PAM responder crashed if user was not set
  - Resolves: upstream #2810 - sssd_be crashed in ipa_srv_ad_acct_lookup_step


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.1-3
changelog:
  - python-sssdconfig: Fix parssing sssd.conf without config_file_version
  - Resolves: upstream #2837 - REGRESSION: ipa-client-automout failed


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.3-5
changelog:
  - Resolves: rhbz#1310664 - [RFE] IPA: resolve external group memberships of IPA
                             groups during getgrnam and getgrgid
  - Resolves: rhbz#1301303 - sss_obfuscate: SyntaxError: Missing parentheses
                             in call to 'print'


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.3-6
changelog:
  - Resolves: rhbz#1276868 - Sudo PAM Login should support multiple password
                             prompts (e.g. Password + Token)
  - Resolves: rhbz#1313041 - ssh with sssd proxy fails with "Connection closed
                             by remote host" if locale not available


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.13.4-3
changelog:
  - Resolves: rhbz#1335639 - [abrt] sssd-dbus: ldb_msg_find_element():
                             sssd_ifp killed by SIGSEGV


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.14.1-2
changelog:
  - Backport important patches from upstream 1.14.2 prerelease
  - Resolves: upstream #3154 - sssd exits if clock is adjusted backwards after
                               boot
  - Resolves: upstream #3163 - resolving IPA nested user group is broken in 1.14


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.14.1-3
changelog:
  - Fix regression with krb5_map_user
  - Resolves: rhbz#1375552 - krb5_map_user doesn't seem effective anymore
  - Resolves: rhbz#1349286 - authconfig fails with SSSDConfig.NoDomainError:
                             default if nonexistent domain is mentioned


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.14.2-2
changelog:
  - Resolves: rhbz#1369130 - nss_sss should not link against libpthread
  - Resolves: rhbz#1392916 - sssd failes to start after update
  - Resolves: rhbz#1398789 - SELinux is preventing sssd from 'write' accesses
                             on the directory /etc/sssd


author: Jakub Hrozek <jhrozek@redhat.com> - 1.15.0-4
changelog:
  - Cherry-pick patches from upstream that enable the files provider
  - Enable the files domain
  - Retire patch 0501-Partially-revert-CONFIG-Use-default-config-when-none.patch
    which is superseded by the files domain autoconfiguration
  - Related: rhbz#1357418 - SSSD fast cache for local users


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.15.3-0.beta.2
changelog:
  - Fix issue with IPA + SELinux in containers
  - Resolves: upstream https://fedorahosted.org/sssd/ticket/3297


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.15.3-0.beta.3
changelog:
  - Resolves: rhbz#1445680 - Properly fall back to local Smartcard authentication
  - Resolves: rhbz#1437199 - sssd-nfs-idmap-1.15.2-1.fc25.x86_64 conflicts with
                             file from package sssd-common-1.15.1-1.fc25.x86_64
  - Resolves: rhbz#1063278 - sss_ssh_knownhostsproxy doesn't fall back to ipv4


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.15.3-4
changelog:
  - Resolves: rhbz#1488327 - SELinux is preventing selinux_child from write
                             access on the sock_file system_bus_socket
  - Resolves: rhbz#1490402 - SSSD does not create /var/lib/sss/deskprofile and
                             fails to download desktop profile data
  - Resolves: upstream#3485 - getsidbyid does not work with 1.15.3
  - Resolves: upstream#3488 - SUDO doesn't work for IPA users on IPA clients
                              after applying ID Views for them in IPA server
  - Resolves: upstream#3501 - Accessing IdM kerberos ticket fails while id
                              mapping is applied


author: Lukas Slebodnik <lslebodn@redhat.com> - 1.15.3-5
changelog:
  - Resolves: rhbz#1499354 - CVE-2017-12173 sssd: unsanitized input when
                             searching in local cache database access on
                             the sock_file system_bus_socket


author: Lukas Slebodnik <lslebodn@fedoraproject.org> - 1.16.0-5
changelog:
  - Resolves: upstream#3523 - ABRT crash - /usr/libexec/sssd/sssd_nss in
                              setnetgrent_result_timeout
  - Resolves: upstream#3588 - sssd_nss consumes more memory until restarted
                              or machine swaps
  - Resolves: failure in glibc tests
              https://sourceware.org/bugzilla/show_bug.cgi?id=22530
  - Resolves: upstream#3451 - When sssd is configured with id_provider proxy and
                              auth_provider ldap, login fails if the LDAP server
                              is not allowing anonymous binds
  - Resolves: upstream#3285 - SSSD needs restart after incorrect clock is
                              corrected with AD
  - Resolves: upstream#3586 - Give a more detailed debug and system-log message
                              if krb5_init_context() failed
  - Resolves: rhbz#1431153 - SSSD ships a drop-in configuration snippet
                             in /etc/systemd/system
  - Backport few upstream features from 1.16.1


author: Fabiano Fidêncio <fidencio@fedoraproject.org> - 1.16.0-12
changelog:
  - Resolves: rhbz#1538643 - SSSD crashes when retrieving a Desktop Profile
                             with no specific host/hostgroup set
  - Resolves: upstream#3621 - FleetCommander integration must not require
                              capability DAC_OVERRIDE


author: Fabiano Fidêncio <fidencio@fedoraproject.org> - 1.16.1-2
changelog:
  - Resolves: upstream#3573 - sssd won't show netgroups with blank domain
  - Resolves: upstream#3660 - confdb_expand_app_domains() always fails
  - Resolves: upstream#3658 - Application domain is not interpreted correctly
  - Resolves: upstream#3687 - KCM: Don't pass a non null terminated string to
                              json_loads()
  - Resolves: upstream#3386 - KCM: Payload buffer is too small
  - Resolves: upstream#3666 - Fix usage of str.decode() in our tests
  - A few KCM misc fixes


author: Fabiano Fidêncio <fidencio@fedoraproject.org> - 1.16.1-3
changelog:
  - Resolves: upstream#3684 - A group is not updated if its member is removed
                              with the cleanup task, but the group does not
                              change
  - Resolves: upstream#3558 - sudo: report error when two rules share cn
  - Tone down shutdown messages for socket activated responders
  - IPA: Qualify the externalUser sudo attribute
  - Resolves: upstream#3550 - refresh_expired_interval does not work with
                              netgrous in 1.15
  - Resolves: upstream#3402 - Support alternative sources for the files provider
  - Resolves: upstream#3646 - SSSD's GPO code ignores ad_site option
  - Resolves: upstream#3679 - Make nss netgroup requests more robust
  - Resolves: upstream#3634 - sssctl COMMAND --help fails if sssd is not
                              configured
  - Resolves: upstream#3469 - extend sss-certmap man page regarding priority
                              processing
  - Improve docs/debug message about GC detection
  - Resolves: upstream#3715 - ipa 389-ds-base crash in krb5-libs - k5_copy_etypes
                              list out of bound?
  - Resolves: upstream#2653 - Group renaming issue when "id_provider = ldap" is
                              set.
  - Document which principal does the AD provider use
  - Resolves: upstream#3680 - GPO: SSSD fails to process GPOs If a rule is
                              defined, but contains no SIDs
  - Resolves: upstream#3520 - Files provider supports only BE_FILTER_ENUM
  - Resolves: rhbz#1540703 - FreeIPA/SSSD implicit_file sssd_nss error: The Data
                             Provider returned an error
                             [org.freedesktop.sssd.Error.DataProvider.Fatal]


author: Fabiano Fidêncio <fidencio@redhat.com> - 1.16.2-1
changelog:
  - Update to 1.16.2 release
  - Cleanup unused global definitions
  - Remove python2 references from the spec file
  - Resolves: rhbz#1585313 - Kerberos with sssd-kcm is not working on s390x


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-2
changelog:
  - Resolves: rhbz#1622026 - sssd 2.0 regression: Kerberos authentication
                             fails with the KCM ccache


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-4
changelog:
  - Resolves: rhbz#1615417 - [RFE] Add Smart Card authentication for local
                             users


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-7
changelog:
  - Resolves: rhbz#1628503 - sssd only sets the SELinux login context if it
                             differs from the default


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-8
changelog:
  - Resolves: rhbz#1628126 - [abrt] [faf] sssd: unknown function():
                              /usr/libexec/sssd/sssd_be killed by 11 crash
                              func _dbus_list_unlink


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-9
changelog:
  - Resolves: rhbz#1624785 - Remove references of sss_user/group/add/del
                             commands in man pages since local provider
                             is deprecated


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-10
changelog:
  - Resolves: rhbz#1626001 - SSSD should log to syslog if a domain is not
                             started due to a misconfiguration


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-11
changelog:
  - Resolves: rhbz#1628122 - Printing incorrect information about domain
                             with sssctl utility


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-16
changelog:
  - Related: rhbz#1620123 - [RFE] Add option to specify a Smartcard with a
                            PKCS#11 URI


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-17
changelog:
  - Related: rhbz#1637131 - pam_unix unable to match fully qualified username
                            provided by sssd during smartcard auth using gdm


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-18
changelog:
  - Related: rhbz#1638006 - Files: The files provider always enumerates
                            which causes duplicate when running getent passwd


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-19
changelog:
  - Add OSCP checks for p11_child
  - Related: rhbz#1615417 - [RFE] Add Smart Card authentication for local
                            users


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-21
changelog:
  - Related: rhbz#1638150 - session not recording for local user when groups defined
  - Also add silence a Coverity warning, which is related to rhbz#1637131


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-23
changelog:
  - Resolves: rhbz#1642508 - sssd ifp crash when trying to access ipa webui
                             with smart card


author: Michal Židek <mzidek@redhat.com> - 2.0.0-24
changelog:
  - Resolves: rhbz#1646168 - sssctl access-report always prints an error message
  - Resolves: rhbz#1643053 - Restarting the sssd-kcm service should reload the
                             configuration without having to restart the whole
                             sssd
  - Resolves: rhbz#1640576 - sssctl reports incorrect information about local
                             user's cache entry expiration time
  - Resolves: rhbz#1645238 - Unable to su to root when logged in as a local user
  - Resolves: rhbz#1639411 - sssd support for for smartcards using ECC keys


author: Michal Židek <mzidek@redhat.com> - 2.0.0-25
changelog:
  - Resolves: rhbz#1645566 - SSSD 2.x does not sanitize domain name properly
                             for D-bus, resulting in a crash


author: Michal Židek <mzidek@redhat.com> - 2.0.0-27
changelog:
  - Resolves: rhbz#1657979 - SSSD's LDAP authentication provider does not work
                             if ID provider is authenticated with GSSAPI


author: Michal Židek <mzidek@redhat.com> - 2.0.0-29
changelog:
  - Resolves: rhbz#1655459 - [abrt] [faf] sssd: raise():
                             /usr/libexec/sssd/proxy_child killed by 6


author: Michal Židek <mzidek@redhat.com> - 2.0.0-30
changelog:
  - Resolves: 1657898 - SSSD must be cleared/restarted periodically in order to
                        retrieve AD users through IPA Trust


author: Michal Židek <mzidek@redhat.com> - 2.0.0-32
changelog:
  - Resolves: rhbz#1625670 - sssd needs to require a newer version of libtalloc
              and libtevent to avoid an issue in GPO processing


author: Michal Židek <mzidek@redhat.com> - 2.0.0-33
changelog:
  - Resolves: rhbz#1646113 - Missing concise documentation about valid options
                             for sssd-files-provider


author: Michal Židek <mzidek@redhat.com> - 2.0.0-34
changelog:
  - Resolves: rhbz#1622008 - Error message when IPA server uninstall calls
                             kdestroy caused by KCM returning a wrong error
                             code during the delete operation


author: Michal Židek <mzidek@redhat.com> - 2.0.0-36
changelog:
  - Resolves: rhbz#1652563 - incorrect example in the man page of idmap_sss
                             suggests using * for backend sss


author: Michal Židek <mzidek@redhat.com> - 2.0.0-38
changelog:
  - Resolves: rhbz#1578014 - sssd does not work under non-root user
  - Note: Actually the patches were in the 2.0.0-37, this one just adds this
          changelog because it was missing.


author: Michal Židek <mzidek@redhat.com> - 2.0.0-39
changelog:
  - Resolves: rhbz#1661183 - SSSD 2.0 has drastically lower sbus timeout than
                             1.x, this can result in time outs


author: Michal Židek <mzidek@redhat.com> - 2.0.0-40
changelog:
  -Resolves: rhbz#1660083 - extraAttributes is org.freedesktop.DBus.Error.
                            UnknownProperty: Unknown property


author: Michal Židek <mzidek@redhat.com> - 2.0.0-41
changelog:
  -Resolves: rhbz#1659498 - Re-setting the trusted AD domain fails due to wrong
                            subdomain service name being used


author: Michal Židek <mzidek@redhat.com> - 2.0.0-42
changelog:
  - Resolves: rhbz#1645291 - Perform some basic ccache initialization as part
                             of gen_new to avoid a subsequent switch call
                             failure


author: Jakub Hrozek <jhrozek@redhat.com> - 2.0.0-43
changelog:
  - Resolves: rhbz#1672780 - gdm login not prompting for username when smart
                             card maps to multiple users


author: Michal Židek <mzidek@redhat.com> - 2.0.0-45
changelog:
  - Replace ARRAY_SIZE with N_ELEMENTS to reflect samba changes. This is
    done here in order to unblock gating changes before rebase.
  - Related: rhbz#1682305


author: Jakub Hrozek <jhrozek@redhat.com> - 2.2.0-2
changelog:
  - Resolves: rhbz#1673443 - sssd man pages: The default value of
                             "ldap_user_home_directory" is not mentioned
                             with AD server configuration


author: Jakub Hrozek <jhrozek@redhat.com> - 2.2.0-3
changelog:
  - Resolves: rhbz#1725168 - sssd-proxy crashes resolving groups with
                             no members


author: Jakub Hrozek <jhrozek@redhat.com> - 2.2.0-4
changelog:
  - Resolves: rhbz#1283798 - sssd failover does not work on connecting to
                             non-responsive ldaps:// server


author: Michal Židek <mzidek@redhat.com> - 2.2.0-6
changelog:
  - Resolves: rhbz#1726945 - negative cache does not use values from
                             'filter_users' config option for known domains


author: Michal Židek <mzidek@redhat.com> - 2.2.0-7
changelog:
  - Resolves: rhbz#1711318 - p11_child::sign_data() function implementation is
                             not FIPS140 compliant


author: Michal Židek <mzidek@redhat.com> - 2.2.0-8
changelog:
  - Resolves: rhbz#1699480 - Include libsss_nss_idmap-devel in the Builder
                             repository
                           - This just required a raise in release number
                             and changelog for the record.


author: Michal Židek <mzidek@redhat.com> - 2.2.0-10
changelog:
  - Resolves: rhbz#1736483 - Sudo prompt for smart card authentication is missing
                             the trailing colon


author: Michal Židek <mzidek@redhat.com> - 2.2.0-11
changelog:
  - Resolves: rhbz#1733372 - permission denied on logs when running sssd as
                             non-root user


author: Michal Židek <mzidek@redhat.com> - 2.2.0-13
changelog:
  - Resolves: rhbz#1669407 - MAN: Document that PAM stack contains the
              systemd-user service in the account phase in RHEL-8


author: Michal Židek <mzidek@redhat.com> - 2.2.0-14
changelog:
  - Resolves: rhbz#1736796 - sssd config option "default_domain_suffix"
                             should not cause files domain entries to be
                             qualified, this can break sudo access


author: Michal Židek <mzidek@redhat.com> - 2.2.0-15
changelog:
  - Resolves: rhbz#1736265 - Smart Card auth of local user: endless
                             loop if wrong PIN was provided


author: Michal Židek <mzidek@redhat.com> - 2.2.0-16
changelog:
  - Resolves: rhbz#1736861 - dyndns_update = True is no longer enough to get
                             the IP address of the machine updated in IPA upon
                             sssd.service startup


author: Michal Židek <mzidek@redhat.com> - 2.2.0-17
changelog:
  - Resolves: rhbz#1676385 - pam_sss with smartcard auth does not create gnome
                             keyring
  - Also apply a patch to fix gating tests issue


author: Michal Židek <mzidek@redhat.com> - 2.2.0-18
changelog:
  - Resolves: rhbz#1744134 - New defect found in sssd-2.2.0-16.el8
  - Also sync. kcm multihost tests with master


author: Michal Židek <mzidek@redhat.com> - 2.2.0-19
changelog:
  - Resolves: rhbz#1712875 - Old kerberos credentials active instead of valid
                             new ones (kcm)


author: Michal Židek <mzidek@redhat.com> - 2.2.3-2
changelog:
  * Resolves: rhbz#1753694 - Rebase sssd to the latest upstream release
              PART2: Fix gating issue.


author: Michal Židek <mzidek@redhat.com> - 2.2.3-3
changelog:
  * Resolves: rhbz#1753694 - Rebase sssd to the latest upstream release
              Increasing version number to pick latest libldb


author: Michal Židek <mzidek@redhat.com> - 2.2.3-4
changelog:
  * Resolves: rhbz#1781728 - sssctl config-check command does not give proper
                             error messages with line numbers


author: Michal Židek <mzidek@redhat.com> - 2.2.3-5
changelog:
  * Resolves: rhbz#1744500 - [Doc]Provide explanation on escape character
                             for match rules sss-certmap


author: Michal Židek <mzidek@redhat.com> - 2.2.3-9
changelog:
  * Resolves: rhbz#1783190 - [abrt] [faf] sssd:
                             raise(): /usr/libexec/sssd/sssd_autofs killed by 6


author: Michal Židek <mzidek@redhat.com> - 2.2.3-10
changelog:
  * Resolves: rhbz#1583592 - [RFE] Add configurable randomness to SSSD ldap
                             connection timeout


author: Michal Židek <mzidek@redhat.com> - 2.2.3-14
changelog:
  - Resolves: rhbz#1767514 - sssd requires timed sudoers ldap entries to be
                             specified up to the seconds


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-16
changelog:
  - Resolves: rhbz#1792331 - sssd_be crashes when krb5_realm and krb5_server is
                             omitted and auth_provider is krb5


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-17
changelog:
  - Resolves: rhbz#1718193 - p11_child should have an option to skip
                             C_WaitForSlotEvent if the PKCS#11 module
                             does not implement it properly


author: Michal Židek <mzidek@redhat.com> - 2.2.3-18
changelog:
  - Resolves: rhbz#1580506 - [RFE]: sssd to be able to read smartcard
                             certificate EKU and perform an action based
                             on value when generating SSH key from a certificate


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-19
changelog:
  - Resolves: rhbz#1810634 - id command taking 1+ minute for returning user
                             information


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-19
changelog:
  - Resolves: rhbz#1580506 - [RFE]: sssd to be able to read smartcard
                             certificate EKU and perform an action based
                             on value when generating SSH key from a certificate
                             (additional patch)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-1
changelog:
  - Resolves: rhbz#1839037 - Rebase SSSD for RHEL 8.3
  - Resolves: rhbz#1843872 - sssd 2.3.0 breaks AD auth due to GPO parsing failure
  - Resolves: rhbz#1834156 - sssd or sssd-ad not updating their dependencies on "yum update" which breaks working


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-2
changelog:
  - Resolves: rhbz#Bug 1723273 - RFE: Add option to specify alternate sssd config file location with "sssctl config-check" command.


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-3
changelog:
  - Resolves: rhbz#1829470 - `sssd.api.conf` and `sssd.api.d` should belong to `python-sssdconfig` package
  - Resolves: rhbz#1544457 - sssd fails to release file descriptor on child logs after receiving HUP
  - Resolves: rhbz#1824323 - SSSD user filtering is failing on RHEL 8 after "files" provider rebuilds cache
  - Resolves: rhbz#1827432 - When the passwd or group files are replaced, sssd stops monitoring the file for
                             inotify events, and no updates are triggered
  - Resolves: rhbz#1835710 - Change the message "Please enter smart card" to "Please insert smart card"
                             on GDM login with smart-card
  - Resolves: rhbz#1838037 - Oddjob-mkhomedir fails when using NSS compat
  - Resolves: rhbz#1845904 - gdm smart card authentication does not work shortly after disconnecting from network.
  - Resolves: rhbz#1845975 - sssd doesn't follow the link order of AD Group Policy Management
  - Resolves: rhbz#1845980 - sssd is failing to discover other subdomains in the forest
                             if LDAP entries do not contain AD forest root information
  - Resolves: rhbz#1845987 - Document how to prevent invalid selinux context for default home directories
                             in SSSD-AD direct integration.
  - Resolves: rhbz#1845994 - GDM failure loop when no user mapped for smart card
  - Resolves: rhbz#1846003 - GDM password prompt when cert mapped to multiple users and promptusername is False
  - Resolves: rhbz#1850961 - /usr/share/systemtap/tapset/sssd_functions.stp missing a comma


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-4
changelog:
  - Resolves: rhbz#1815584 - id_provider = proxy proxy_lib_name = files returns * in password field, breaking PAM authentication
  - Resolves: rhbz#1794607 - SSSD must be able to resolve membership involving root with files provider
  - Resolves: rhbz#1803134 - Improve "unlock" time when user session already active


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-5
changelog:
  - Resolves: rhbz#1821719 - sssd (sssd_be) is consuming 100% CPU, partially due to failing mem-cache
  - Fixed "requires/provides" rpmdiff warning


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-7
changelog:
  - Resolves: rhbz#1723273 - RFE: Add option to specify alternate sssd config file location with "sssctl config-check" command.
  - Resolves: rhbz#1780404 - smartcards: special characters must be escaped when building search filter


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-8
changelog:
  - Resolves: rhbz#1868387 - system not enforcing GPO rule restriction. ad_gpo_implicit_deny = True is not working
  - Resolves: rhbz#1854951 - sss-certmap man page change to add clarification for userPrincipalName attribute from AD schema
  - Resolves: rhbz#1856861 - False errors/warnings are logged in sssd.log file after enabling 2FA prompting settings in sssd.conf
  - Resolves: rhbz#1869683 - p11_child: default value of ocsp_dgst == sha256 doesn't conform RFC5019 and has to be changed to sha1


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-9
changelog:
  - Resolves: rhbz#1855323 - When ad_gpo_implicit_deny is True, it is permitting users to login when no gpo is applied


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-1
changelog:
  - Resolves: rhbz#1881992 - Rebase SSSD for RHEL 8.4
  - Resolves: rhbz#1722842 - sssd-kcm does not store TGT with ssh login using GSSAPI
  - Resolves: rhbz#1734040 - sssd crash in ad_get_account_domain_search()
  - Resolves: rhbz#1784459 - [RFE] tlog does not allow to exclude some users from session recording
  - Resolves: rhbz#1791300 - sporadic sssd_be crash on s390x
  - Resolves: rhbz#1817122 - 'getent group ldapgroupname' doesn't show any LDAP users or some LDAP users when 'rfc2307bis' schema is used with SSSD.
  - Resolves: rhbz#1819012 - [RFE] Improve AD site discovery process
  - Resolves: rhbz#1846778 - [RfE] `/usr/libexec/sssd/p11_child` cmdline argument '--nssdb' might be confusing when SSSD was built against OpenSSL
  - Resolves: rhbz#1873715 - automount sssd issue when 2 automount maps have the same key (one un uppercase, one in lowercase)
  - Resolves: rhbz#1879860 - correction in sssd.conf:pam_response_filter man page
  - Resolves: rhbz#1881336 - [RFE] sssd-ldap man page modification for parameter "ldap_referrals"
  - Resolves: rhbz#1883488 - [RfE] Implement a new sssd.conf option to disable the filter for AD domain local groups from trusted domains
  - Resolves: rhbz#1884196 - [RFE] Add "enabled" option to domain section in config file
  - Resolves: rhbz#1884205 - KCM: Increase client idle timeout to 5 minutes
  - Resolves: rhbz#1884207 - [RFE] ldap: add new option ldap_library_debug_level
  - Resolves: rhbz#1884213 - [RFE] add offline_timeout_max config option to control offline interval backoff
  - Resolves: rhbz#1884281 - Secondary LDAP group go missing from 'id' command
  - Resolves: rhbz#1884301 - [RFE] dyndns: suport asymmetric auth for nsupdate


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-3
changelog:
  - Resolves: rhbz#1900733 - sssd_be segfaults at be_refresh_get_values_ex() due to NULL ptrs in results of sysdb_search_with_ts_attr()
  - Resolves: rhbz#1876514 - High CPU utilization by the sssd_kcm process
  - Resolves: rhbz#1894540 - sssd component logging is now too generic in syslog/journal
  - Resolves: rhbz#1828483 - filtered ID is appearing due to strange negative cache behavior


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-4
changelog:
  - Resolves: rhbz#1876514 - High CPU utilization by the sssd_kcm process
  - Resolves: rhbz#1876658 - filter_groups option partially filters the group from 'id' output of the user because gidNumber still appears in 'id' output [RHEL 8]
  - Resolves: rhbz#1895001 - User lookups over the InfoPipe responder fail intermittently


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-5
changelog:
  - Resolves: rhbz#1631410 - Can't login with smartcard with multiple certs having same ID value
  - Resolves: rhbz#1884213 - [RFE] add offline_timeout_max config option to control offline interval backoff (additional patches)
  - Resolves: rhbz#1893159 - Default debug level should report all errors / failures
  - Resolves: rhbz#1893698 - [RFE] sudo kerberos authentication


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-6
changelog:
  - Resolves: rhbz#1113639 - autofs: return a connection failure until maps have been fetched
  - Resolves: rhbz#1915395 - Memory leak in the simple access provider
  - Resolves: rhbz#1915319 - SSSD: SBUS: failures during servers startup
  - Resolves: rhbz#1893698 - [RFE] sudo kerberos authentication (additional patches)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-7
changelog:
  - Resolves: rhbz#1920001 - Do not add '%' to group names already prefixed with '%' in IPA sudo rules
  - Resolves: rhbz#1918433 - sssd unable to lookup certmap rules
  - Resolves: rhbz#1917382 - [abrt] [faf] sssd: dp_client_handshake_timeout(): /usr/libexec/sssd/sssd_be killed by 11


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-8
changelog:
  - Resolves: rhbz#1926622 - Add support to verify authentication indicators in pam_sss_gss
  - Resolves: rhbz#1926454 - First smart refresh query contains modifyTimestamp even if the modifyTimestamp is 0.
  - Resolves: rhbz#1893159 - Default debug level should report all errors / failures (additional patch)


author: Ondrej Mosnáček <omosnace@redhat.com> - 1.1.1-16_1
changelog:
  - [RHEL] Apply 'Add missing dependencies to the tests package'
  - [RHEL] Apply 'Update patch from upstream'


author: Sahana Prasad <sahana@redhat.com> - 1.1.5-3
changelog:
  - Enables building on old kernels [sync fix in Fedora from omosnance].
  - This is required for covscans as they run on RHEL7 machines.


author: Phil Sutter <psutter@redhat.com> - 0.3-2
changelog:
  - Add missing build requirement: gcc.
  - Add source code patches to facilitate following changes.
  - Patches managed in git, so add git as another build requirement.
  - Respect build system compiler flags.
  - Use %make_build instead of plain make in %build.
  - Add %check target which performs unattended runtime test.
  - Use -D install flag instead of manual mkdir.


author: Phil Sutter <psutter@redhat.com> - 0.3-3
changelog:
  - Use %autosetup flag '-p1' instead of '-S git' to get rid of git dependency.
  - Use %license macro in %files section.
  - Added comment about included patches' upstream status.


author: Martin Gansser <martinkg@fedoraproject.org> - 1:0.9.57-1
changelog:
  - Update to 0.9.57
  - Dropped dependency on libgcrypt
  - Dropped dependency on openssl
  - Update tarball link to "https:"
  - Add examples from doc/examples


author: Stephen Gallagher <sgallagh@redhat.com> - 2.5.0-2
changelog:
  - Fix memory corruption error using Module.search_rpms() from python
  - Speed up valgrind tests
  - Resolves: rhbz#1714766


author: Hangbin Liu <haliu@redhat.com> - 1.7-1
changelog:
  - Update to 1.7
  - libndp: apply filter to raw socket to only accept ND messages
  - libndp: move ndp_sock_{open,close}() after msg parsing functions
  - ndptool: Fix compilation on musl libc


author: Hangbin Liu <haliu@redhat.com> - 1.7-2
changelog:
  - ndptool: add -T target support (rhbz 1666194)
  - ndptool: fix target parameter typo (rhbz 1666194)
  - libndp: close sockfd after using to avoid handle leak (rhbz 1666194)
  - libndp: fix nd_msg typo when setting target address (rhbz 1666194)


author: Hangbin Liu <haliu@redhat.com> - 1.7-3
changelog:
  - ndptool: add -D dest support (rhbz 1697595)
  - ndptool: fix potential memory leak caused by strdup (rhbz 1697595)


author: Steve Dickson <steved@redhat.com> 2.3.3-39
changelog:
  - systemd: Ingnore export failures in nfs-server.serivce unit (bz 1894873)
  - exports.man: Remove some outdated verbiage (bz 1769688)


author: Steve Dickson <steved@redhat.com> 2.3.3-42
changelog:
  - gssd: Add options to allow for the use of ~/.k5identity file (bz 1868087)
  - man: Correct gssd(8) description of rpc-timeout and context-timeout (bz 1908232)
  - exportfs: fix unexporting of '/' (bz 1944119)


author: Steve Dickson <steved@redhat.com> 2.3.3-44
changelog:
  - gssd: Deal with failed thread creation (bz 1981400)
  - gssd: Add timeout for upcall threads (bz 1981403)
  - gssd: Cleaned up debug messages (bz 1961056)
  - spec: Updated description of the nfs-utils rpm (bz 1981419)


author: Weitao Zhou <zhouwt@linux.alibaba.com> 2.3.3-46.0.1
changelog:
  - use extern in header files when declaring global variables for compatible gcc10 build
  - allow compilation to succeed with -fno-common


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - switch to nfs-utils as the base tree
  - fix the statfs patch for the new code base
  - single package that obsoletes everything we had before (if I am to keep
    some traces of my sanity with me...)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - Fix incorrect file specifications in statd manpage.
  - Require gawk 'cause it's used in nfslock init script.


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - don't install any rquota pages in _mandir: (#39707, #44119)
  - don't try to manipulate rpc.rquotad in init scripts 
  -   unless said program actually exists: (#43340)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - "service nfs restart" should start services even if currently 
  -   not running (#59469)
  - bump version to 0.3.3-4


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added the setting of lockd ports via sysclt interface
  - Removed queue setting code since its no longer needed


author: <SteveD@RedHat.com>
changelog:
  - Removed gssd tarball and old nfsv4 patch.
  - Added new nfsv4 patches that include both the
     gssd and idmapd daemons
  - Added redhat-only v4 patch that reduces the
     static librpc.a to only contain gss rpc related
     routines (I would rather have gssd use the glibc 
     rpc routines)
  -Changed the gssd svcgssd init scripts to only
     start up if SECURE_NFS is set to 'yes' in
     /etc/sysconfig/nfs


author: <SteveD@RedHat.com>
changelog:
  - Added the addition and deletion of rpc_pipefs to /etc/fstab
  - Added the addition and deletion of module aliases to /etc/modules.conf


author: <SteveD@RedHat.com>
changelog:
  - Added the shutting down of the rpc v4 daemons.
  - Updated the Red Hat only patch with some init script changes.


author: <SteveD@RedHat.com>
changelog:
  - Made the nfs4 daemons initscripts work better when 
    sunrpc is not a module
  - added more checks to see if modules are being used.


author: <SteveD@RedHat.com>
changelog:
  - Created a pipe between the parent and child so 
    the parent process can report the correct exit
    status to the init scripts
  - Added SIGHUP processing to rpc.idmapd and the 
    rpcidmapd init script.


author: <SteveD@RedHat.com>
changelog:
  - Changed the permission on idmapd.conf to 644
  - Added mydaemon code to svcgssd
  - Updated the add_gssd.patch from upstream


author: <SteveD@RedHat.com>
changelog:
  - Removed the auto option from MOUNTD_NFS_V2 and
    MOUNTD_NFS_V3 variables. Since v2 and v3 are on
    by default, there only needs to be away of 
    turning them off.


author: <SteveD@RedHat.com>
changelog:
  - Fixed syntax error in nfs initscripts when
    NETWORKING is not defined
  - Removed sync warning on readonly exports.
  - Changed run levels in rpc initscripts.
  - Replaced modinfo with lsmod when checking
    for loaded modules.


author: <SteveD@RedHat.com>
changelog:
  - nfslock stop is now done on package removals
  - Eliminate 3 syslog messages that are logged for
    successful events.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Major clean up. 
  - Removed all unused/old patches
  - Rename and condensed a number of patches
  - Updated to CITI's nfs-utils-1.0.6-13 patches


author: <SteveD@RedHat.com>
changelog:
  - Make sure the uid/gid of nfsnobody is the
    correct value for all archs (bz# 123900)
  - Fixed some security issues found by SGI (bz# 133556)


author: <SteveD@RedHat.com
changelog:
  - Incorporate some clean up code from Ulrich Drepper (bz# 134025)
  - Fixed the chkconfig number in the rpcgssd, rpcidmapd, and 
    rpcsvcgssd initscrpts (bz# 132284)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added "$RQUOTAD_PORT" variable to nfs.init which
    allows the rpc.rquotad to use a predefined port
    (bz# 124676)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Replaced a memcopy with explicit assignments
    in getquotainfo() of rquotad to fix potential overflow
    that can occur on 64bit machines. (bz 138068)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Fix problem in idmapd that was causing "xdr error 10008"
    errors (bz 142813)
  - make sure the correct hostname is used in the SM_NOTIFY
    message that is sent from a rebooted server which has 
    multiple network interfaces. (bz 139101)

  - Changed nfslock to send lockd a -KILL signal
    when coming down. (bz 125257)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added support to rpcgssd.init and rpcsvcgssd.init scripts
    to insmod security modules.
  - Changed the nfs.init script to bring rpc.svcgssd up and down,
    since rpc.svcgssd is only needed with the NFS server is running.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-3
changelog:
  - Changed xlog to use LOG_INFO instead of LOG_DEBUG
    so debug messages will appear w/out any config
    changes to syslog.conf.
  - Reworked how /etc/exports is setup (bz 151389)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-4
changelog:
  - Fixed a compile error on x86_64 machines in the gss code.
  - Updated the statd-notify-hostname.patch to eliminate 
    a segmentation fault in rpc.statd when an network 
    interface was down. (bz 151828)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-12
changelog:
  - Changed useradd to use new -l flag (bz149407)
  - 64bit fix in gssd code (bz 163139)
  - updated broken dependencies
  - updated rquotad to compile with latest
    quota version.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-16
changelog:
  - Reworked the nfslock init script so if lockd is running
    it will be killed which is what the HA community needs. (bz 162446)
  - Stopped rpcidmapd.init from doing extra echoing when
    condstart-ed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-17
changelog:
  - Updated to latest nfs-utils code in upstream CVS tree
  - Updated libevent from 1.0b to 1.1a
  - Added libgssapi-0.4 and librpcsecgss-0.6 libs from CITI


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-18
changelog:
  - Updated libnfsidmap to 0.11
  - Updated libgssapi to 0.5
  - Made sure the gss daemons and new libs are
    all using the same include files.
  - Removed code from the tree that is no longer used.
  - Add ctlbits patch that introduced the -N -T and -U
    command line flags to rpc.nfsd.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-19
changelog:
  - Updated to latest code in SourceForge CVS
  - Updated to latest CITI patches (1.0.7-4)
  - Fix bug in nfsdreopen by compiling in server defaults


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-1.FC5
changelog:
  - Updated to 1.0.8-rc2 release
  - Broke out libgssapi into its own rpm
  - Move librpcsecgss and libnfsidmap in the new nfs-utils-lib rpm
  - Removed libevent code; Required to be installed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-3.FC5
changelog:
  - Added innetgr patch that changes configure scripts to 
    check for the innetgr function. (bz 177899)


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-4.FC5
changelog:
  - Added new libnfsidmap call, nfs4_set_debug(), to rpc.idmapd
    which turns on debugging in the libarary.


author: <SteveD@RedHat.com> 1.0.8-3
changelog:
  - Split the controlling of nfs version, ports, and protocol 
    into two different patches
  - Fixed and added debugging statements to rpc.mountd.
  - Fixed -p arg to work with priviledged ports (bz 156655)
  - Changed nfslock initscript to set LOCKD_TCPPORT and
    LOCKD_UDPPORT (bz 162133)
  - Added MOUNTD_NFS_V1 variable to version 1 of the
    mount protocol can be turned off. (bz 175729)
  - Fixed gssd to handel mixed case characters in
    the domainname. (bz 186069)


author: <SteveD@RedHat.com> 1.0.9-2
changelog:
  - Enabled the creating of mount.nfs and umount.nfs binaries
  - Added mount option fixes suggested by upstream.
  - Fix lazy umounts (bz 169299)
  - Added -o fsc mount option.


author: <SteveD@RedHat.com> 1.0.9-5
changelog:
  - Changed gssd daemons to cache things in memory
    instead of /tmp which makes selinux much happier.
    (bz 203078)


author: <SteveD@RedHat.com> 1.0.9-6
changelog:
  - Removed the compiling of getiversion and getkversion since
    UTS_RELEASE is no longer defined and these binary are
    not installed.


author: Karel Zak <kzak@redhat.com> 1.0.9-7
changelog:
  - Added support for the mount -s (sloppy) option (#205038)
  - Added nfs.5 man page from util-linux
  - Added info about [u]mount.nfs to the package description


author: Steve Dickson <steved@redhat.com> 1.0.10-2
changelog:
  - Fixed -o remount (bz 210346)
  - fix memory leak in rpc.idmapd (bz 212547)
  - fix use after free bug in dirscancb (bz 212547)
  - Made no_subtree_check a default export option (bz 212218)


author: Steve Dickson <steved@redhat.com> 1.0.10-4
changelog:
  - Doing a connect on UDP sockets causes the linux network
    stack to reject UDP patches from multi-home server with
    nic on the same subnet. (bz 212471)


author: Steve Dickson <steved@redhat.com> 1.0.12-2
changelog:
  - Added condstop to all the initscripts (bz 196934)
  - Made no_subtree_check a default export option (bz 212218)


author: Steve Dickson <steved@redhat.com> 1.0.12-5
changelog:
  - Fix mount.nfs4 to display correct error message (bz 227212)
  - Updated mountd and showmount reverse lookup flags (bz 220772)
  - Eliminate timeout on nfsd shutdowns (bz 222001)
  - Eliminate memory leak in mountd (bz 239536)
  - Make sure statd uses correct uid/gid by chowning
    the /var/lib/nfs/statd with the rpcuser id. (bz 235216)
  - Correct some sanity checking in rpc.nfsd. (bz 220887) 
  - Added missing unlock_mtab() call in moutnd
  - Have mountd hold open etab file to force inode number to change (bz 236823)
  - Create a /etc/sysconfig/nfs with all the possible init script
    variables (bz 234543)
  - Changed nfs initscript to exit with correct value (bz 221874)


author: Steve Dickson <steved@redhat.com> 1.0.10-6
changelog:
  - Make sure the condrestarts exit with a zero value (bz 240225)
  - Stopped /etc/sysconfig/nfs from being overwritten on updates (bz 234543)
  - Added -o nordirplus mount option to disable READDIRPLUS (bz 240357)
  - Disabled the FSCache patch, for now...


author: Steve Dickson <steved@redhat.com> 1.1.0-4
changelog:
  - Make sure the open() system calling in exportfs uses
    mode bits when creating the etab file (bz 252440).


author: Steve Dickson <steved@redhat.com> 1.1.0-5
changelog:
  - Changed the default paths in sm-notify to 
    /var/lib/nfs/statd (bz 258461)
  - Updated exportfs manpage (bz 262861)


author: Steve Dickson <steved@redhat.com> 1.1.1-1
changelog:
  - Updated to latest upstream release, nfs-utils-1.1.1
  - Added the removal of sm-notify.pid to nfslock init script.
  - Changed spec file to use condrestart instead of condstop
    when calling init scripts.
  - Fixed typo in rpc.mountd man page 
  - Turn on 'nohide' automatically for all refer exports (bz 313561)


author: Steve Dickson <steved@redhat.com> 1.1.1-2
changelog:
  - Added -S/--since to the nfsstat(1) manpage
  - The wording in the exportfs man page can be a bit confusing, implying
    that "exportfs -u :/foo" will unexport /foo from all hosts, which it won't
  - Removed nfsprog option since the kernel no longer supports it.
  - Removed mountprog option since the kernel no longer supports it.
  - Stop segfaults on amd64 during warnings messages.
  - Fix bug when both crossmnt and fsid are set.


author: Steve Dickson <steved@redhat.com> 1.1.1-3
changelog:
  - Added in relatime mount option so mount.nfs stays
    compatible with the mount command in util-linux-ng (bz 274301)


author: Steve Dickson <steved@redhat.com> 1.1.1-5
changelog:
  - Stopped mountd from incorrectly logging an error
    (commit 9dd9b68c4c44f0d9102eb85ee2fa36a8b7f638e3)
  - Stop gssd from ignoring the machine credential caches
    (commit 46d439b17f22216ce8f9257a982c6ade5d1c5931)
  - Fixed typo in the nfsstat command line arugments.
    (commit acf95d32a44fd8357c24e8a04ec53fc6900bfc58)
  - Added test to stop buffer overflow in idmapd
    (commit bcd0fcaf0966c546da5043be700587f73174ae25)


author: Steve Dickson <steved@redhat.com> 1.1.2-3
changelog:
  - Documented how to turn off/on protocol support for
    rpc.nfsd in /etc/sysconfig/nfs (bz443625)
  - Corrected the nfslock initscript 'status' return code (bz 441605)
  - Removed obsolete code from the nfslock initscript (bz 441604)


author: Steve Dickson <steved@redhat.com> 1.1.2-7
changelog:
  - Added -D_FILE_OFFSET_BITS=64 to CFLAGS
  - make nfsstat read and print stats as unsigned integers
  - Added (but not installed) the mountstats and nfs-iostat
    python scripts.


author: Steve Dickson <steved@redhat.com> 1.1.2-12
changelog:
  - Changed the default directories for sm-notify (bz 435480)
  - Added 'condstop' to init scripts so service are not
    started when nfs-utils is removed.


author: Steve Dickson <steved@redhat.com> 1.1.3-5
changelog:
  - Reworked init scripts so service will be able to
    stop when some of the checks fail. (bz 462508)
  - Pre-load nfsd when args to rpc.nfsd are given (bz 441983)


author: Steve Dickson <steved@redhat.com> 1.1.4-4
changelog:
  - gssd: unblock DNOTIFY_SIGNAL in case it was blocked
  - Ensure statd gets started if required when non-root
    user mounts an NFS filesystem


author: Steve Dickson <steved@redhat.com> 1.1.4-5
changelog:
  - Make sure /proc/fs/nfsd exists when the nfs init script
    does the exports (bz 473396)
  - Fixed typo in nfs init script that caused rpc.rquotad daemons
    to be started but not stoppped (bz 473929)


author: Steve Dickson <steved@redhat.com> 1.1.4-6
changelog:
  - mount command: remove local getport() implementation
  - mount command: Replace clnt_ping() and getport() calls in probe_port()
  - mount command: Use nfs_error() instead of perror()
  - mount command: Use nfs_pmap_getport() in probe_statd()


author: Steve Dickson <steved@redhat.com> 1.1.4-8
changelog:
  - mount command: AF_INET6 support for probe_bothports()
  - mount command: support AF_INET6 in probe_nfsport() and probe_mntport()
  - mount command: full support for AF_INET6 addresses in probe_port()
  - gssd/svcgssd: add support to retrieve actual context expiration
  - svcgssd: use the actual context expiration for cache


author: Steve Dickson <steved@redhat.com> 1.1.4-9
changelog:
  - text-based mount command: add function to parse numeric mount options
  - text-based mount command: use po_get_numeric() for handling retry
  - sm-notify command: fix a use-after-free bug
  - statd: not unlinking host files


author: Steve Dickson <steved@redhat.com> 1.1.4-11
changelog:
  - Added warnings to tcp wrapper code when mounts are 
    denied due to misconfigured DNS configurations.
  - gssd: By default, don't spam syslog when users' credentials expire
  - mount: revert recent fix for build problems on old systems
  - mount: use gethostbyname(3) when building on old systems
  - mount: getport: don't use getaddrinfo(3) on old systems
  - mount: Random clean up
  - configure: use "--disable-uuid" instead of	"--without-uuid"


author: Steve Dickson <steved@redhat.com> 1.1.4-12
changelog:
  - configure: Remove inet_ntop(3) check from configure.ac
  - configure: Add new build option "--enable-tirpc"
  - showmount command: Quiesce warning when TI-RPC is disabled


author: Steve Dickson <steved@redhat.com> 1.1.4-14
changelog:
  - text-based mount command: make po_rightmost() work for N options
  - text-based mount command: Function to stuff "struct pmap" from mount options
  - text-based mount options: Use new pmap stuffer when	rewriting mount options
  - text-based mount command: fix mount option rewriting logic
  - text-based mount command: support AF_INET6 in rewrite_mount_options()


author: Steve Dickson <steved@redhat.com> 1.1.4-15
changelog:
  - Reworked tcp wrapper code to correctly use API (bz 480223)
  - General clean up of tcp wrapper code.


author: Steve Dickson <steved@redhat.com> 1.1.4-18
changelog:
  - umount.nfs command: Add an AF_INET6-capable version of nfs_call_unmount()
  - umount.nfs command: Support AF_INET6 server addresses
  - umount command: remove do_nfs_umount23 function


author: Steve Dickson <steved@redhat.com> 1.1.5-2
changelog:
  - Fixed lockd not using settings in sysconfig/nfs (bz 461043)
  - Fixed some lost externs in the tcpwrapper code


author: Steve Dickson <steved@redhat.com> 1.1.5-4
changelog:
  - Added upstream rc3 patch
    - gssd: initialize fakeseed in prepare_krb5_rfc1964_buffer
    - gssd: NULL-terminate buffer after read in read_service_info (try #2)
    - gssd: free buffer allocated by gssd_k5_err_msg
    - gssd: fix potential double-frees in gssd
    - Removed a number of warn_unused_result warnings


author: Steve Dickson <steved@redhat.com> 1.1.6-3
changelog:
  - Added upstream 1.1.7-rc1 patch 
    - utils/nfsd: add support for minorvers4
    - sm-notify: Don't orphan addrinfo structs
    - sm-notify: Failed DNS lookups should be retried
    - mount: remove legacy version of nfs_name_to_address()
    - compiling error in rpcgen
    - nfs-utils: Fix IPv6 support in support/nfs/rpc_socket.c
    - umount.nfs: Harden umount.nfs error reportin


author: Tom "spot" Callaway <tcallawa@redhat.com> 1.1.6-4
changelog:
  - Replace the Sun RPC license with the BSD license, with the explicit permission of Sun Microsystems


author: Steve Dickson <steved@redhat.com> 1.2.0-4
changelog:
  - Added upstream 1.2.1-rc1 patch 
    - Fix to check in closeall()
    - Make --enable-tirpc the default
    - Set all verbose types in gssd daemons
    - Retry exports if getfh() fails


author: Steve Dickson <steved@redhat.com> 1.2.0-6
changelog:
  - Added NFSD v4 dynamic pseudo root patch which allows
    NFS v3 exports to be mounted by v4 clients.


author: Steve Dickson <steved@redhat.com> 1.2.0-9
changelog:
  - Added upstream 1.2.1-rc3 patch
    - Add IPv6 support to nfsd
    - Allow nfssvc_setfds to properly deal with AF_INET6
    - Convert nfssvc_setfds to use getaddrinfo
    - Move check for active knfsd to helper function
    - Declare a static common buffer for nfssvc.c routine
    - Convert rpc.nfsd to use xlog() and add --debug and --syslog options


author: Steve Dickson <steved@redhat.com> 1.2.0-10
changelog:
  - Added upstream 1.2.1-rc4 patch
    - Fix bug when both crossmnt
    - nfs(5): Add description of lookupcache mount option
    - nfs(5): Remove trailing blanks
    - Added nfs41 support to nfssat
    - Added support for mount to us a configuration file.


author: Steve Dickson <steved@redhat.com> 1.2.0-11
changelog:
  - Added upstream 1.2.1-rc5 patch
    - Added --sort --list functionality to nfs-iostat.py
    - Fixed event handler in idmapd
    - Added -o v4 support
    - Disabled IPv6 support in nfsd
    - Don't give client an empty flavor list
    - Fixed gssed so it does not blindly caches machine credentials


author: Steve Dickson <steved@redhat.com> 1.2.0-13
changelog:
  - Added upstream 1.2.1-rc5 patch
    - mount.nfs: Support negotiation between v4, v3, and v2
    - mount.nfs: Keep server's address in nfsmount_info
    - mount.nfs: Sandbox each mount attempt
    - mount.nfs: Support negotiation between v4, v3, and v2


author: Steve Dickson <steved@redhat.com> 1.2.0-15
changelog:
  - Change the nfsmount.conf file to define v3 as the default 
    protocol version.
  - Make sure versions set on the command line override version
    set in nfsmount.conf
  - Make version rollbacks still work when versions are set in
    nfsmount.conf


author: Steve Dickson <steved@redhat.com> 1.2.0-17
changelog:
  - Updated to the latest pseudo root release (rel7).
  - Added upstream 1.2.1-rc7 patch which fixes:
    - Stop ignoring the -o v4 option (bz 529407)
    - Allow network protocol roll backs when proto is set
      in the config file (bz 529864)
  - v4 mounts will roll back to v3 mounts when the mount
    fails with ENOENT.


author: Steve Dickson <steved@redhat.com> 1.2.1-10
changelog:
  - Updated to the latest pseudo root release (rel10) which
    containts the upstream pseudo root release


author: Steve Dickson <steved@redhat.com> 1.2.1-11
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-2-2-rc7
    which includes Ipv6 support for statd (disabled by default).


author: Steve Dickson <steved@redhat.com> 1.2.1-12
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-2-2-rc7
    which includes Ipv6 support for tcpwrapper (disabled by default).


author: Steve Dickson <steved@redhat.com> 1.2.1-13
changelog:
  - mount.nfs: Configuration file parser ignoring options
  - mount.nfs: Set the default family for lookups based on 
      defaultproto= setting
  - Enabled ipv6


author: Steve Dickson <steved@redhat.com> 1.2.3-2
changelog:
  - Initscripts do not conform to LSB specification (bz 621562)
  - sm-notify needs to call res_init() before each try (bz 625531)
  - exports(5) man page duplicated paragraphs (bz 590921)


author: Steve Dickson <steved@redhat.com> 1.2.3-4
changelog:
  - The nfs service is not stopped on reboot or halt (bz 652786)
  - Removed obsolete configuration values (bz 653765)


author: Steve Dickson <steved@redhat.com> 1.2.3-7
changelog:
  - Updated to latest upstream release: nfs-utils-1-2-4-rc5
  - Add initscripts changes needed for rpcbind to be running when nfs is started
  - Initscripts changes needed to support NFS over RDMA
  - Allow the setting of the NFSv4 grace period (bz 665387)


author: J. Bruce Fields <bfields@redhat.com> 1.2.4-1
changelog:
  - Rely on crypto module autoloading in init scripts
  - initscripts: just try to mount rpc_pipefs always


author: Steve Dickson <steved@redhat.com> 1.2.4-4
changelog:
  - Converted init scrips to systemd services. (bz 699040)
  - Made nfsnobody's uid/gid to always be a 16-bit value of -2
  - mount: fix for libmount from util-linux >= 2.20


author: Steve Dickson <steved@redhat.com> 1.2.4-7
changelog:
  - Added StandardError=syslog+console to all the service files
    so startup errors will be logged. 
  - Changed exportfs to only log errors on existing /etc/export.d 
    directory, which eliminates a needless syslog entry.
  - Automount /proc/fs/nfsd for rpc.nfsd


author: Steve Dickson <steved@redhat.com> 1.2.4-9
changelog:
  - Both the nfs.lock and nfs.idmap services should always
    enabled on both installs and upgrades (bz 699040)
  - Fixed the paths to the server scriptlets (bz 733531)


author: Steve Dickson <steved@redhat.com> 1.2.5-1
changelog:
  - Update to upstream RC release: nfs-utils-1.2.6-rc1
  - Added named.service to After list in nfs-server.service (bz 742746)


author: Steve Dickson <steved@redhat.com> 1.2.5-2
changelog:
  - Removed SUID bits on mount commands (bz 528498)
  - Fixed a few typos in a couple man pages (bz 668124, 673818, 664330)
  - Fixed a I/0 problem in rpc.idmapd (bz 684308)


author: Steve Dickson <steved@redhat.com> 1.2.5-5
changelog:
  - Ensured nfs-idmap service is started after the network up (bz 748275)
  - Update to upstream RC release: nfs-utils-1.2.6-rc3 (bz 746497)


author: Steve Dickson <steved@redhat.com> 1.2.5-6
changelog:
  - Remove RQUOTAD_PORT and RQUOTAD from /etc/sysconfig/nfs (bz 754496)
  - Ensured nfs-idmap service is started after the named is up (bz 748275)


author: Steve Dickson <steved@redhat.com> 1.2.5-7
changelog:
  - Enabled new idmaping by installing the id_resolver.conf file.
  - Update to upstream RC release: nfs-utils-1.2.6-rc4


author: Steve Dickson <steved@redhat.com> 1.2.5-11
changelog:
  - Update to upstream RC release: nfs-utils-1.2.6-rc6
  - Reworked how the nfsd service requires the rpcbind service (bz 768550)


author: Steve Dickson <steved@redhat.com> 1.2.5-13
changelog:
  - Make sure statd is start before NFS mounts (bz 786050)
  - rpc.idmap: Hide global symbols from libidmap plugins (bz 797332)
  - nfsd: Bump up the default to 8 nprocs (bz 757452)


author: Steve Dickson <steved@redhat.com> 1.2.5-14
changelog:
  - gssd: Look for user creds in user defined directory (bz 786993)
  - gssd: Don't link with libgssapi_krb5 (bz 784908)


author: Steve Dickson <steved@redhat.com> 1.2.6-0
changelog:
  - Update to the latest upstream release: nfs-utils-1.2.6 (bz 821673)
  - Split out NFS server daemons into individual service files (bz 769879) 
  - Removed Wants= from nfs-lock.service (bz 817895)
  - Only enable services if they are enabled on upgrades (bz 807020)


author: Steve Dickson <steved@redhat.com> 1.2.6-1
changelog:
  - Correctly search for the existence of nfsnobody (bz 816149)
  - Correctly change the default group id for nfsnobody (bz 816149)


author: Steve Dickson <steved@redhat.com> 1.2.6-12
changelog:
  - Added FedFS support by added a BuildRequires for fedfs-utils-devel
  - Introduce new systemd-rpm macros (bz 850227)
  - Updated to latest upstream RC release: nfs-utils.1.2.7-rc5 (bz 833024)


author: Steve Dickson <steved@redhat.com> 1.2.6-14
changelog:
  - Allow the service to start when RPCNFSDCOUNT is comment out. (bz 870143)
  - Removed some old cruft from the spec file (bz 226198)


author: Steve Dickson <steved@redhat.com> 1.2.7-3
changelog:
  - Updated to latest upstream RC release: nfs-utils.1.2.8-rc3
  - Took ownership of /usr/lib/nfs-utils (bz 894535)


author: Steve Dickson <steved@redhat.com> 1.2.7-5
changelog:
  - Updated to latest upstream RC release: nfs-utils.1.2.8-rc4
  - Added nfs-lock.service to After line in nfs-server.service (bz 914792)


author: Steve Dickson <steved@redhat.com> 1.2.8-2.0
changelog:
  - Update to latest upstream RC release: nfs-utils.1.2.9-rc1
  - Added GSS_USE_PROXY variable to nfs.sysconfig (bz 967112)


author: Steve Dickson <steved@redhat.com> 1.2.9-2.0
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-2-10-rc2
  - Added Also=nfs.target to nfs-service file. (bz 1047972)


author: Steve Dickson <steved@redhat.com> 1.2.9-3.0
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-2-10-rc3
    - gssd: Improve first attempt at acquiring GSS credentials (bz 1055077)
  - gssd: set $HOME to prevent recursion (bz 1052902)


author: Steve Dickson <steved@redhat.com> 1.3.0-5.0
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-3-1-rc3
  - Use _statdpath to define where statd's state lives


author: Steve Dickson <steved@redhat.com> 1.3.1-0.0
changelog:
  - Update to the latest upstream release: nfs-utils-1-3-1
  - Enable gssproxy to manage the GSSAPI creds on the server.


author: Steve Dickson <steved@redhat.com> 1.3.1-4.0
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-3-2-rc4 (bz 1164477)
  - Handle the rpcuser like other created users (bz 1165322)
  - Restored lockd port and v4 grace/lease interface (bz 1115225)
  - Make sure nfs-client target is enabled (bz 1173564)


author: Steve Dickson <steved@redhat.com> 1.3.2-0.2
changelog:
  - Change statd-notify.service to not wait for network to come up (bz 1183293)
  - Added the rpcuser group before adding the rpcuser uid (bz 1165322)


author: Steve Dickson <steved@redhat.com> 1.3.3-7.rc4
changelog:
  - Updated to the latest RC release: nfs-utils-1-3-4-rc4 (bz 1316701)
  - Changed BuildRequires: glibc-headers ==> BuildRequires: gcc (bz 1230477)


author: Steve Dickson <steved@redhat.com> 2.1.1-4.rc2
changelog:
  - Updated to the latest RC release: nfs-utils-2-1-2-rc2 (bz 1419351)
  - Fixed typo in nfs.sysconfig  (bz 1422249)


author: Steve Dickson <steved@redhat.com> 2.1.1-5.rc2
changelog:
  - Conditionally restart gssproxy now that config file is installed (bz 1440885)
  - systemd: Afters are also needed for the Wants=network-online.target (bz 1419351)
  - nfsdcltrack: silence some expected errors (bz 1445863)
  - Cleaned up fuzzy patches


author: Steve Dickson <steved@redhat.com> 2.1.1-5.rc4
changelog:
  - Updated to the latest RC releease: nfs-utils-2-1-2-rc4 (bz 1462218)
  - rpc.c: added include file so UINT16_MAX is defined


author: Steve Dickson <steved@redhat.com> 2.2.1-1.rc1
changelog:
  - Restore ABI compat with pre-merge libnfsidmap (bz 1509063)
  - Add a build-time dependency on python3-devel


author: Steve Dickson <steved@redhat.com> 2.3.1-6.rc1
changelog:
  - Stop failing when systemctl try-restart gssproxy fails (bz 1552976)
  - Use Fedora build flags (bz 1548679)


author: Steve Dickson <steved@redhat.com> 2.3.1-8.rc1
changelog:
  - Ensure /var/lib/nfs/rpc_pipefs has the correct permissions (bz 1583489)
  - Remove rpc.svcgssd from systemd scripts (bz 1591700)


author: Steve Dickson <steved@redhat.com> 2.3.3-3
changelog:
  - Ensure /var/lib/nfs/rpc_pipefs has the correct permissions (bz 1583489)
  - mount.nfs: Only ignore EBUSY when a filesystem is already mount (bz 1629644)


author: Steve Dickson <steved@redhat.com> 2.3.3-6
changelog:
  - Changed /var/lib/nfs/rpc_pipefs to have 555 permissions (bz 1583489)
  - Removed tcp wrappers support from man pages (bz 1642596) 
  - Reload not restart gssproxy in nfs-server.service (bz 1592660)


author: Steve Dickson <steved@redhat.com> 2.3.3-8
changelog:
  - Update junction code with latest upstream code (1543126)
  - Make sure /etc/sysconfig/nfs is immutabl (1639432)


author: Steve Dickson <steved@redhat.com> 2.3.3-12
changelog:
  - Change nfsconvert.sh not to set the immutable bit (bz 1673685)
  - Change nfsconvert.py not to create the new dummy /etc/sysconfig/nfs (bz 1673685)


author: Steve Dickson <steved@redhat.com> 2.3.3-15
changelog:
  - nfs.conf: Fixed manage-gids option typo (bz 1672395)
  - sm-notify: Added -f flag to nfs.conf parsing (bz 1677576)
  - Add nfs.conf equivalent for the statd --no-notify cmdline option (bz 1683714)


author: Steve Dickson <steved@redhat.com> 2.3.3-16
changelog:
  - Add a conversion for new sm-notify force option in nfs.conf (bz 1677576)
  - Correct the modes on /etc/nfs.conf after a conversion (bz 1655880)


author: Steve Dickson <steved@redhat.com> 2.3.3-17
changelog:
  - Moved the gating tests out of a patch and into the top dir (bz 1653927)
  - Move the mode corrections on /etc/nfs.conf to nfsconvert.py (bz 1655880)
  - gssd: add verbosity options to the rpc.gssd man page (bz 1668026)


author: Steve Dickson <steved@redhat.com> 2.3.3-24
changelog:
  - nfs.man: Fixed small typo in man page (bz 1732877)
  - mount: Report correct error in the fall_back cases (bz 1709963)
  - rpc.mountd: Fix e_hostname and e_uuid leaks (bz 1712202)
  - spec: Remove redundant manpage files (bz 1718738)


author: Steve Dickson <steved@redhat.com> 2.3.3-27
changelog:
  - More coverity scans updates (bz 1746572)
  - nfsd: Adjust nfs.conf setting/parsing of rdma port (bz 1710532)
  - Add plain --rdma option to nfs.conf convertor (bz 1747295)
  - mountstats: Add per-op error counts to iostat command (bz 1719983)
  - gssd: add configure options verbosity to man page (bz 1749642)


author: Steve Dickson <steved@redhat.com> 2.3.3-32
changelog:
  - junction: Fixed debug statement (bz 1831829)
  - Userspace support for the latest nfsdcld daemon (bz 1817756)


author: Steve Dickson <steved@redhat.com> 2.3.3-33
changelog:
  - manpage: Add a description of the 'nconnect' mount option (bz 1761352)
  - nfsdclddb: Redname clddb-tool to nfsdclddb (bz 1836924)


author: Steve Dickson <steved@redhat.com> 2.3.3-38
changelog:
  - exports man page: warn about subdirectory exports (bz 1652437)
  - Don't modify /etc/group on upgrades (bz 1856881)
  - nfs-iostat: divide by zero with fresh mount (bz 1861823)
  - nfsiostat: Drop autofs entries before calling compare_iostats() (bz 1859130)
  - nfsdclddb: clddb-tool was recently renamed to nfsdclddb (bz 1893599)


author: Phil Sutter <psutter@redhat.com> [1.1.1-2.el8]
changelog:
  - chain: Hash chain list by name (Phil Sutter) [1658533]
  - chain: Add lookup functions for chain list and rules in chain (Phil Sutter) [1658533]
  - chain: Support per chain rules list (Phil Sutter) [1658533]
  - src: remove nftnl_rule_cmp() and nftnl_expr_cmp() (Phil Sutter) [1658533]


author: Phil Sutter <psutter@redhat.com> [1.1.1-3.el8]
changelog:
  - src: chain: Fix nftnl_chain_rule_insert_at() (Phil Sutter) [1666495]
  - src: chain: Add missing nftnl_chain_rule_del() (Phil Sutter) [1666495]
  - flowtable: Fix for reading garbage (Phil Sutter) [1661327]
  - flowtable: Fix memleak in nftnl_flowtable_parse_devs() (Phil Sutter) [1661327]
  - flowtable: Fix use after free in two spots (Phil Sutter) [1661327]
  - flowtable: Add missing break (Phil Sutter) [1661327]
  - object: Avoid obj_ops array overrun (Phil Sutter) [1661327]


author: Phil Sutter <psutter@redhat.com> [1.1.4-2.el8]
changelog:
  - obj/ct_timeout: Fix NFTA_CT_TIMEOUT_DATA parser (Phil Sutter) [1758673]
  - set_elem: Validate nftnl_set_elem_set() parameters (Phil Sutter) [1758673]
  - obj/ct_timeout: Avoid array overrun in timeout_parse_attr_data() (Phil Sutter) [1758673]
  - set: Don't bypass checks in nftnl_set_set_u{32,64}() (Phil Sutter) [1758673]
  - obj/tunnel: Fix for undefined behaviour (Phil Sutter) [1758673]
  - set_elem: Fix return code of nftnl_set_elem_set() (Phil Sutter) [1758673]
  - obj: ct_timeout: Check return code of mnl_attr_parse_nested() (Phil Sutter) [1758673]


author: Phil Sutter <psutter@redhat.com> [1.1.5-2.el8]
changelog:
  - chain: Correctly check realloc() call (Phil Sutter) [1778952]
  - flowtable: Correctly check realloc() call (Phil Sutter) [1778952]
  - chain: Fix memleak in error path of nftnl_chain_parse_devs() (Phil Sutter) [1778952]
  - flowtable: Fix memleak in error path of nftnl_flowtable_parse_devs() (Phil Sutter) [1778952]


author: Phil Sutter <psutter@redhat.com> [1.1.5-3.el8]
changelog:
  - set_elem: Introduce support for NFTNL_SET_ELEM_KEY_END (Phil Sutter) [1795223]
  - set: Add support for NFTA_SET_DESC_CONCAT attributes (Phil Sutter) [1795223]
  - include: resync nf_tables.h cache copy (Phil Sutter) [1795223]


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.3.0-4
changelog:
  - Python 2 binary package renamed to python2-libnl3
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Michal Ruprich <michalruprich@gmail.com> - 14:1.9.1-1
changelog:
  - Resolves: #1806422 - rebase libpcap to version 1.9.1
  - Resolves: #1743650 - [RFE] enable inbox support for sniffing offloaded (RDMA) traffic with tcpdump
  - Resolves: #1785330 - Invalid IPv4 addresses are accepted without reporting even a warning
  - Resolves: #1792208 - Resource exhaustion while PHB header length validation


author: Bastien Nocera <bnocera@redhat.com> - 1.22.0-6
changelog:
  + libpeas-1.22.0-6
  - Remove python2 loader, all GNOME apps using libpeas were ported to Python3
    when ported to GTK+ 3.x, and obsolete libpeas-loader-python
  - Resolves: #1559090


author: Dan Winship <danw@redhat.com> - 0.4.15-5.1
changelog:
  - Drop python2 subpackage (#1559092)
  - Drop PAC runner based on the "pacrunner" package (#1569023)
  - Replace pacrunner-crash-fix patch with version from RHEL7
  - Drop kde subpackage (#1538147)


author: - 10.3.8-5
changelog:
  - Fix partial injection of Fedora build flags.
  - Double the sizeof array fdesc to fix a gcc compiling issue.
  - Resolves: bz1556062


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.4.0-4
changelog:
  - Python 2 binary package renamed to python2-pwquality
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Tomáš Mráz <tmraz@redhat.com> 1.4.4-1
changelog:
  - Translation updates
  - Add usersubstr check for substrings of N characters from the username
    patch by Danny Sauer
  - pam_pwquality: Abort the retry loop if user requests it
  - Allow setting retry, enforce_for_root, and local_users_only options
    in the pwquality.conf config file


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 1.4.4-3
changelog:
  - Resolves: rhbz#1919026 libpwquaily rpm requires cracklib to function but RPM missing requirement [updated]


author: Christine Caulfield <ccaulfie@redhat.com> - 1.0.3-11
changelog:
  Correctly set socket directory permissions when
    qb_ipcs_connection_auth_set() is called
    Resolves: rhbz#1836146


author: Ales Matej <amatej@redhat.com> - 1.10.6-1
changelog:
  - Update to 1.10.6
  - Imporove handling of xattr to re-download damadged files (RhBug:1690894)
  - Rephrase repository GPG check error message (RhBug:1741442)
  - Add sleep before next try when all mirrors were tried (RhBug:1741931)
  - Raise logging level of error messages (RhBug:1737709)
  - Handle webservers that don't support ranges when downloading zck
  - Define LRO_SUPPORTS_CACHEDIR only with zchunk (RhBug:1726141)
  - Allow to use mirrors multiple times for a target (RhBug:1678588)
  - Allow to try baseurl multiple times (RhBug:1678588)


author: Ales Matej <amatej@redhat.com> - 1.11.0-1
changelog:
  - Update to 1.11.0
   - Retry mirrorlist/metalink downloads several times (RhBug:1741931)
   - Improve variable substitutions in URLs and add ${variable} support


author: Ales Matej <amatej@redhat.com> - 1.11.3-1
changelog:
  - Update to 1.11.3
   - Prefer mirrorlist/metalink over baseurl (RhBug:1775184)
   - Fix calling Python API without holding GIL (RhBug:1788918) 
   - Do not unref LrErr_Exception on exit (RhBug:1778854)


author: Nicola Sella <nsella@redhat.com> - 1.12.0-1
changelog:
  - Update to 1.12.0
  - Decode package URL when using for local filename (RhBug:1817130)
  - Fix memory leak in lr_download_metadata() and lr_yum_download_remote()
  - Download sources work when at least one of specified is working (RhBug:1775184)
  - Enable building on OSX


author: Pavla Kratochvilova <pkratoch@redhat.com> - 1.14.0-1
changelog:
  - Update to 1.14.0
  - Fix the key string parsing in url_substitution
  - When zchunk enabled and not using HTTP/S protocol, download the whole file (RhBug:1886706)
  - Add an option LRO_SSLVERIFYSTATUS to check TLS certificate revocation status (using OCSP stapling) (RhBug:1814383)
  - Fix: lr_perform() - Avoid 100% CPU usage
  - Add support for working with certificates used with proxy
  - Reposync does not re-download unchanged packages (RhBug:1931904)
  - Fix memory leaks


author: Martin Kutlak <mkutlak@redhat.com> - 2.9.5-10
changelog:
  - reportclient: Search for required packages recursively
  - reportclient: Find and download required debuginfo packages
  - report-client: Find debuginfos in own method
  - Resolves: rhbz#1783897


author: Michal Židek <mzidek@redhat.com> - 2.9.5-12
changelog:
  - Resolves: rhbz#1835388 - abrt-addon-ccpp causes failures during openscap scans on CCE-27119-7
  - This is just libreport side (abrt also needs to be patched)


author: zhangbinchen <zhangbinchen@openanolis.org> - 2.9.5-15.0.1
changelog:
  - Disable centos sub package
  - Don't requires subscription for Anolis OS
  - Remove unused sub packages
  - cherry-pick [1acfc44 00b6684 2f29df5]


author: Petr Lautrbach <plautrba@redhat.com> - 2.9-2.1
changelog:
  - Use Python distutils to install SELinux python bindings (#1719771)
  - Move  sefcontext_compile to -utils package (#1612518)


author: Petr Lautrbach <plautrba@redhat.com> - 2.9-5
changelog:
  - Revert "genhomedircon: check usepasswd" (rhbz#1871786)
  - semanage.conf - improve usepasswd=False explanation (rhbz#1871786)
  - semanage.conf - expand list of ignoredirs (rhbz#1871786)


author: Petr Lautrbach <plautrba@redhat.com> - 2.7-5
changelog:
  - cil: Create new keep field for type attribute sets
  - build: follow standard semantics for DESTDIR and PREFIX
  - cil: show an error when cil_expr_to_string() fails


author: Petr Lautrbach <plautrba@redhat.com> - 2.7-6
changelog:
  - Prevent freeing unitialized value in ibendport handling
  - Add support for the SCTP portcon keyword
  - Export sepol_polcap_getnum/name functions


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-3
changelog:
  - cil: Fix out-of-bound read of file context pattern ending with "\"
  - cil: Destroy classperms list when resetting classpermission (#1983517)
  - cil: Destroy classperm list when resetting map perms (#1983521)
  - cil: cil_reset_classperms_set() should not reset classpermission (#1983525)
  - cil: Set class field to NULL when resetting struct cil_classperms
  - cil: More strict verification of constraint leaf expressions
  - cil: Exit with an error if declaration name is a reserved word
  - cil: Allow permission expressions when using map classes
  - cil: Reorder checks for invalid rules when building AST
  - cil: Cleanup build AST helper functions
  - cil: Create new first child helper function for building AST
  - cil: Remove unused field from struct cil_args_resolve
  - cil: Destroy disabled optional blocks after pass is complete
  - cil: Check if name is a macro parameter first
  - cil: fix NULL pointer dereference in __cil_insert_name
  - cil: Report disabling an optional block only at high verbose levels
  - cil: Use AST to track blocks and optionals when resolving
  - cil: Reorder checks for invalid rules when resolving AST
  - cil: Sync checks for invalid rules in booleanifs
  - cil: Check for statements not allowed in optional blocks (#1983530)


author: Peter Jones <pjones@redhat.com> - 2.3.0-2
changelog:
  - Once again, don't complain about compilers newer than tested with in the
    public headers.
  - Fix up bad %global vs %define directives
  - Fix up bad old changelog dates
  - Note there's a missing changelog here from the 2.3.0 rebase


author: Pavla Kratochvilova <pkratoch@redhat.org> - 0.7.4-1
changelog:
  - soname bump to "1"
  - incompatible API changes:
    * bindings: Selection.flags is now an attribute
    * repodata_lookup_num now works like the other lookup_num functions
  - new functions:
    * selection_make_matchsolvable
    * selection_make_matchsolvablelist
    * pool_whatmatchessolvable
    * repodata_search_arrayelement
    * repodata_lookup_kv_uninternalized
    * repodata_search_uninternalized
    * repodata_translate_dir
  - new repowriter interface to write solv files allowing better
    control over what gets written
  - support for filtered file lists with a custom filter
  - dropped support of (since a long time unused) REPOKEY_TYPE_U32
  - selected bug fixes:
    * fix nasty off-by-one error in repo_write
    * do not autouninstall packages because of forcebest updates
    * fixed a couple of null pointer derefs and potential memory
      leaks
    * made disfavoring recommended packages work if strong recommends
      is enabled
    * no longer disable infarch rules when they don't conflict with
      the job
    * repo_add_rpmdb: do not copy bad solvables from the old solv file
    * fix cleandeps updates not updating all packages
  - new features:
    * support rpm's new '^' version separator
    * support set/get_considered_list in bindings
    * new experimental SOLVER_FLAG_ONLY_NAMESPACE_RECOMMENDED flag
    * do favor evaluation before pruning allowing to (dis)favor
      specific package versions
    * bindings: support pool.matchsolvable(), pool.whatmatchessolvable()
      pool.best_solvables() and selection.matchsolvable()
    * experimental DISTTYPE_CONDA and REL_CONDA support


author: Ales Matej <amatej@redhat.org> - 0.7.7-1
changelog:
  - Update to 0.7.7
  - selected bug fixes:
    * fix updating of too many packages in focusbest mode
    * fix handling of disabled installed packages in distupgrade
    * fix repository priority handling for multiversion packages
    * better support of inverval deps in pool_match_dep()
    * support src rpms that have non-empty provides
    * fix favorq leaking between solver runs if the solver is reused
    * fix SOLVER_FLAG_FOCUS_BEST updateing packages without reason
    * be more correct with multiversion packages that obsolete their
      own name
    * allow building with swig-4.0.0
    * lock jobs now take precedence over dup and forcebest jobs
  - new features
    * new POOL_FLAG_WHATPROVIDESWITHDISABLED pool flag 
    * bindings: add get_disabled_list() and set_disabled_list()
    * bindings: add whatcontainsdep()
    * bindings: make the selection filters return the self object
    * MSVC compilation support


author: Ales Matej <amatej@redhat.org> - 0.7.11-1
changelog:
  - Update to 0.7.11
  - selected bug fixes:
    * support arch<->noarch package changes when creating patch
      conflicts from the updateinfo data
    * also support other rpm database types
    * fixed solv_zchunk decoding error if large chunks are used
    * treat retracted pathes as irrelevant
    * made add_update_target work with multiversion installs
  - new features
    * support for SOLVER_BLACKLIST jobs that block the installation of matched
      packages unless they are directly selected by an SOLVER_INSTALL job
    * libsolv now also parses the patch status in the updateinfo parser
    * new solvable_matchessolvable() function
    * support conda constrains dependencies
    * new rpm_stat_database() function
    * new rpm_hash_database_state() function


author: Nicola Sella <nsella@redhat.com> - 0.7.16-1
changelog:
  - Update to 0.7.16
  - selected bug fixes:
    * make testcase_mangle_repo_names deal correctly with freed repos
    [bnc#1177238]
    * fix add_complex_recommends() selecting conflicted packages in
      rare cases leading to crashes
    * improve choicerule generation so that package updates are
      prefered in more cases
    * fix deduceq2addedmap clearing bits outside of the map
    * conda: feature depriorization and fix startswith implementation
    * Fix solvable swapping messing up idarrays
    * fix ruleinfo of complex dependencies returning the wrong origin
    * fix solv_zchunk decoding error if large chunks are used
      [bnc#1159314]
  - new features
    * new testcase_mangle_repo_names() function
    * new solv_fmemopen() function
    * Enable zstd compression support for sle15 and sle15-sp2
    * Support blacklisted packages in solver_findproblemrule()
      [bnc#1172135]
    * Support rules with multiple negative literals in choice rule
      generation
    * build with -DENABLE_RPMDB_LIBRPM=1 on SUSE to support
      multiple rpm database backends
    * added two new function to make libzypp independent of the rpm
      database format
    * support conda constrains dependencies


author: Pavla Kratochvilova <pkratoch@redhat.org> - 0.7.17-1
changelog:
  - Update to 0.7.17
  - selected bug fixes:
    * repo_write: fix handling of nested flexarray
    * improve choicerule generation a bit more to cover more cases
    * harden testcase parser against repos being added too late
    * support python-3.10
    * check /var/lib/rpm macro in rpmdb code
  - new features:
    * handle default/visible/langonly attributes in comps parser
    * support multiple collections in updateinfo parser
    * add '-D' option in rpmdb2solv to set the dbpath


author: Pavla Kratochvilova <pkratoch@redhat.org> - 0.7.19-1
changelog:
  - Update to 0.7.19
  - repo_add_conda: add flag to skip v2 packages
  - fix rare segfault in resolve_jobrules() that could happen if new rules are learnt
  - fix error handling in solv_xfopen_fd()
  - fix memory leaks


author: Milan Crha <mcrha@redhat.com> - 2.62.2-1
changelog:
  - Update to 2.62.2
  - Backport upstream patch for CVE-2018-12910 - Crash in soup_cookie_jar.c:get_cookies() on empty hostnames


author: Anderson Sasaki <ansasaki@redhat.com> - 0.8.5-1
changelog:
  - Update to version 0.8.5
    * Fixed an issue where global known_hosts file was ignored (#1649321)
    * Fixed ssh_get_fd() to return writable file descriptor (#1649319)
    * Fixed regression introduced in known_hosts parsing (#1649315)
    * Fixed a regression which caused only the first algorithm in known_hosts to
      be considered (#1638790)


author: Anderson Sasaki <ansasaki@redhat.com> - 0.8.91-0.1
changelog:
  - Update to 0.9.0 pre release version (0.8.91)
  - Added default configuration files for client and server
  - Removed unused patch files left behind
  - Fixed issues found to run upstream test suite with SELinux


author: Anderson Sasaki <ansasaki@redhat.com> - 0.9.0-1
changelog:
  - Update to version 0.9.0
    https://www.libssh.org/2019/06/28/libssh-0-9-0/
  - Added explicit Requires for crypto-policies
  - Do not ignore known_hosts keys when SSH_OPTIONS_HOSTKEYS is set
  - Provide the configuration files in a separate libssh-config subpackage


author: Anderson Sasaki <ansasaki@redhat.com> - 0.9.0-3
changelog:
  - Add Obsoletes in libssh-config to avoid conflict with old libssh which
    installed the configuration files.


author: Anderson Sasaki <ansasaki@redhat.com> - 0.9.4-1
changelog:
  - Update to version 0.9.4
    https://www.libssh.org/2020/04/09/libssh-0-9-4-and-libssh-0-8-9-security-release/
  - Fixed CVE-2019-14889 (#1781782)
  - Fixed CVE-2020-1730 (#1802422)
  - Create missing directories in the path provided for known_hosts files (#1733914)
  - Removed inclusion of OpenSSH server configuration file from
    libssh_server.config (#1821339)


author: Anderson Sasaki <ansasaki@redhat.com> - 0.9.4-2
changelog:
  - Do not return error when server properly closed the channel (#1849071)
  - Add a test for CVE-2019-14889
  - Do not parse configuration file in torture_knownhosts test


author: Sahana Prasad <sahana@redhat.com> - 0.9.4-3
changelog:
  - Fix CVE-2020-16135 NULL pointer dereference in sftpserver.c if
    ssh_buffer_new returns NULL (#1862646)


author: Tony Asleson <tasleson@redhat.com> 0.0.3-1
changelog:
  - Changes to installer, daemon uid, gid, /var/run/lsm/*
  - NFS improvements and bug fixes
  - Python library clean up (rpmlint errors)


author: Tony Asleson <tasleson@redhat.com> 0.0.5-1
changelog:
  - Spec file clean-up improvements
  - Async. operation added to lsmcli and ability to check on job status
  - Sub volume replication support
  - Ability to check for child dependencies on VOLUMES, FS and files
  - SMI-S Bug fixes and improvements


author: Tony Asleson <tasleson@redhat.com> 0.0.6-1
changelog:
  - Documentation improvements (man & source code)
  - Support for access groups
  - Unified spec files Fedora/RHEL
  - Package version auto generate
  - Rpm target added to make
  - Bug fix for missing optional property on volume retrieval (smispy plug-in)


author: Tony Asleson <tasleson@redhat.com> 0.0.7-1
changelog:
  - Bug fix for smi-s constants
  - Display formatting improvements
  - Added header option for lsmcli
  - Improved version handling for builds
  - Made terminology consistent
  - Ability to list visibility for access groups and volumes
  - Simulator plug-in fully supports all block operations
  - Added support for multiple systems with a single plug-in instance


author: Tony Asleson <tasleson@redhat.com> 0.0.8-1
changelog:
  - Make building of SMI-S CPP plugin optional
  - Add pkg-config file
  - SMIS: Fix exception while retrieving Volumes
  - SMIS: Fix exception while retrieving Volumes
  - lsm: Add package imports
  - Make Smis class available in lsm python package
  - Add option to disable building C unit test
  - Make simulator classes available in lsm python package
  - Make ontap class available in lsm python package
  - Changes to support building on Fedora 17 (v2)
  - Spec. file updates from feedback from T. Callaway (spot)
  - F17 linker symbol visibility correction
  - Remove unneeded build dependencies and cleaned up some warnings
  - C Updates, client C library feature parity with python


author: Tony Asleson <tasleson@redhat.com> 0.0.9-1
changelog:
  - Initial checkin of lio plug-in
  - System filtering via URI (smispy)
  - Error code mapping (ontap)
  - Fixed build so same build tarball is used for all binaries


author: Tony Asleson <tasleson@redhat.com> - 0.0.20-1
changelog:
  - New upstream release
  - Separate package for python libraries
  - Make timestamps match on version.py in library
  - Add python-paramiko requirement for IBM plug-in


author: Tony Asleson <tasleson@redhat.com> 0.0.21-1
changelog:
  - New upstream release
  - Put plug-ins in separate sub packages
  - Don't include IBM plug-in on RHEL > 6, missing paramiko


author: Tony Asleson <tasleson@redhat.com> - 1.0.0-3
changelog:
  - Specify udev files to /usr/lib dir instead of /lib
  - Move command line python files to python package


author: Gris Ge <fge@redhat.com> - 1.2.1-1
changelog:
  - New upstream release 1.2.1.
  - Changed upstream URL and source URL to github.
  - New sub-pacakges:
      * libstoragemgmt-megaraid-plugin
          New plugin in 1.2.0 release.
      * libstoragemgmt-hpsa-plugin
          New plugin in 1.2.0 release.
  - Add bash-completion script for lsmcli.
  - New rpmbuild switch: 
      * '--without test'
          Use to skip 'make check' test to save debug time.
      * '--without megaraid'
          Don't compile megaraid plugin.
      * '--without hpsa'
          Don't compile hpsa plugin.
  - Remove PyYAML BuildRequires.
  - Add NEWS(changelog) to document folder.
  - Replace the hardcoded udev path with <percent>{_udevrulesdir}.
  - Fix rpmlint error 'dir-or-file-in-var-run'.
  - Mark /run/lsm and /run/lsm/ipc as <percent>ghost folder.
  - Fix rpmlint warnning 'W: non-standard-uid /run/lsm libstoragemgmt'.
  - Add 'Requires(post)' and 'Requires(postun)' to plugins in order
    to make sure plugin is installed after libstoragemgmt and removed before
    libstoragemgmt.
  - Fix the incorrect use of <percent>bcond_with and <percent>bcond_without.
  - Removed autogen.sh which is not required for release version any more.


author: Gris Ge <fge@redhat.com> 1.2.3-1
changelog:
  - New upstream release 1.2.3:
      * Bug fixes:
          * lsmcli bash completion: Fix syntax error.
          * lsmcli bash completion: Fix volume-delete.
          * lsmcli bash completion: Add missing completions.
          * Fix: selinux dac_override
          * Manpage: Update hpsa and megaraid plugin manpages.
          * HP Smart Array Plugin: Fix pool querying on P410i.
          * MegaRAID Plugin: Fix bug when no volume configured.


author: Gris Ge <fge@redhat.com> 1.4.0-1
changelog:
  - Add Python3 support.
  - New sub rpm package python3-libstoragemgmt.
  - Add support of lmiwbem(this rpm use pywbem instead).
  - Allow plugin test to be run concurrently.
  - Bug fixes:
      * Fix megaraid plugin for dell PERC.
      * Fix local disk rotation speed query on NVMe disk.
      * Fix lsmcli incorrect try-expect on local disk query.
      * Fix all the gcc compile warnings.
      * Fix the obsolete usage of AC_OUTPUT in configure.ac.
  - Library adds:
      * Query serial of local disk:
          lsm_local_disk_serial_num_get()/lsm.LocalDisk.serial_num_get()
      * Query LED status of local disk:
          lsm_local_disk_led_status_get()/lsm.LocalDisk.led_status_get()
      * Query link speed of local disk:
          lsm_local_disk_link_speed_get()/lsm.LocalDisk.link_speed_get()


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.4.0-4
changelog:
  - Python 2 binary packages renamed to python2-libstoragemgmt and python2-libstoragemgmt-clibs
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3
  - %python_provide added for all four python subpackages


author: Gris Ge <fge@redhat.com> - 1.5.0-0
changelog:
  - New upstream release 1.5.0:
      * New sub-package libstoragemgmt-nfs-plugin, libstoragemgmt-arcconf-plugin,
        and libstoragemgmt-local-plugin.
      * C API manpages for libstoragemgmt-devel package.


author: Gris Ge <fge@redhat.com> - 1.5.0-2
changelog:
  - Fix multilib confliction of nfs-plugin by move binrary file to
    another subpackage libstoragemgmt-nfs-plugin-clibs


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.14-1
changelog:
  - New upstream release - 2.1.14
  - Patch the waf script to explicitly call python2 as "env python" doesn't
    yield py2 anymore


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-1
changelog:
  - Resolves: rhbz#1684577 - Rebase libtalloc to version 2.1.16 for Samba
  - Resolves: rhbz#1597315 - libtalloc uses Python 2 to build
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-2
changelog:
  - Remove python2 libraries on upgrade
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 2.1.16-3
changelog:
  - Also obsolete python2-libtalloc-debuginfo
  - Resolves: rhbz#1567136 - libtalloc: Drop Python 2 subpackage from RHEL 8


author: Peter Robinson <pbrobinson@fedoraproject.org> 4.9-2
changelog:
  - Move development related docs to devel sub package
  - Cleanup spec and macros
  - Update valgrind ExclusiveArch


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.16-1
changelog:
  - New upstream release 1.3.16
  - Use RHEL_ALLOW_PYTHON2_FOR_BUILD=1 until libtalloc uses waf3
  - Patch the waf script to explicitly call python2 as "env python" doesn't
    yield py2 anymore


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.18.1
changelog:
  - Resolves: rhbz#1684579 - Rebase libtdb to version 1.3.18 for Samba
  - Resolves: rhbz#1597319 - libtdb uses Python 2 to build
  - Resolves: rhbz#1567138 - libtdb: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.18.2
changelog:
  - Obsolete the python2 packages on upgrade
  - Resolves: rhbz#1567138 - libtdb: Drop Python 2 subpackage from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 1.4.2-2
changelog:
  - Resolves: rhbz#1754420 - Rebase libtdb 1.4.2 for samba
  - Related: rhbz#1754420 - Fix sssd tests (tdb)


author: Xin Long <lxin@redhat.com> - 1.28-2
changelog:
  - teamd: use enabled option_changed to sync enabled to link_up for lb runner [1668132]
  - teamd: tdport has to exist if item->per_port is set in __find_by_item_path [1687336]
  - teamd: remove port if adding fails [1668744]


author: Xin Long <lxin@redhat.com> - 1.28-3
changelog:
  - teamd: return 0 if tdport doesn't exist in teamd_config_port_set [1722449]
  - teamd: improve the error output for non-integer port prio


author: Xin Long <lxin@redhat.com> - 1.29-1
changelog:
  - man teamd.conf: update some parameter default values [1732587]
  - 1.29 release
  - teamd: add port_master_ifindex_changed for link_watch_port_watch_ops
  - initscripts: fix if/fi align
  - teamd: fix a json object memleak in get_port_obj() [1767685]
  - libteam: set netlink event socket as non-blocking [1684389]
  - libteam: double NETLINK_RCVBUF to fix -ENOMEM error
  - teamd: add a default value 1000 for link_watch.interval


author: Xin Long <lxin@redhat.com> - 1.29-2
changelog:
  - teamd/lacp: fix segfault due to NULL pointer dereference [1758073]
  - teamd: fix build error in expansion of macro teamd_log_dbgx [1758073]
  - teamd: update ctx->hwaddr after setting team dev to new hwaddr
  - libteam: wapper teamd_log_dbg with teamd_log_dbgx [1758073]


author: Xin Long <lxin@redhat.com> - 1.31-1
changelog:
  - 1.31 release
  - utils/bond2team: remove TYPE in ifcfg file [1858518]
  - utils/bond2team: keep delivering config to file if stdout not supplied [1858518]
  - teamd/lacp: silence ignore none LACP frames
  - Send LACP PDU right after the Actor state has been changed
  - Skip setting the same hwaddr to a lag port if not needed
  - Make all netlink socket RCVBUF sizes configurable
  - Don't return an error when timerfd socket return 0
  - Fix ifinfo_link_with_port race condition with newlink
  - teamd: fix possible race in master ifname callback
  - 1.30 release
  - teamd: Disregard current state when considering port enablement [1851460]


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.37-1
changelog:
  - New upstream release 0.9.37
  - Use RHEL_ALLOW_PYTHON2_FOR_BUILD=1 for build
  - Use %{__python2}, not "python", as the Python2 interpreter


author: Jakub Hrozek <jhrozek@redhat.com> - 0.9.39-1
changelog:
  - Resolves: #1684580 - Rebase libtevent to version 0.9.36 for Samba
  - Resolves: #1597318 - libtevent uses Python 2 to build
  - Resolves: #1567139 - libtevent: Drop Python 2 subpackage from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com>
changelog:
  - Remove the python2 subpackages on upgrade
  - Resolves: #1567139 - libtevent: Drop Python 2 subpackage from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 0.10.0-2
changelog:
  - Resolves: #1754421 - Upgrade tevent to 0.10.0 version for samba
  - Related: #1754421 - Fix sssd tests (tevent)


author: Steve Dickson <steved@redhat.com> 1.1.4-4
changelog:
  - Enable gating using reverse dependency testing of nfs-utils (bz 1681965)
  - Updated the URL (bz 1638671)
  - Fix EOF detection on non-blocking socket (bz 1641875)


author: Steve Dickson <steved@redhat.com> 1.1.4-5
changelog:
  - blacklist: Add a few more well known ports (bz 1854147)
  - Disallow calling auth_refresh from clnt_call with RPCSEC_GSS (bz 1934866)


author: Pavel Raiskup <praiskup@redhat.com> - 2.4.6-23
changelog:
  - bake in versioned requirement on automake (rhbz#1193591)
  - fix testsuite FTBFS against automake 1.16.1
  - bypass -specs=* to gcc (rhbz#985592)


author: Jeff Moyer <jmoyer@redhat.com> - 1.0.7-2.el8
changelog:
  - Fix versioning.  The installed library is 1.0.7, make the rpm match.
  - bump release number for build, which includes -fPIC fix
  - Related: rhbz#1862551


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-14
changelog:
  - Do not build python2-libuser at all in RHEL-8
  - Resolves: #1559103 - libuser: Drop Python 2 subpackage(s) from RHEL 8


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-16
changelog:
  - Use 2048bit keys in tests
  - Resolves: rhbz#1611729 - [RHEL8-S-BUILD] libuser Fails Scratch Build on rhel-8.0


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-17
changelog:
  - Resolves: rhbz#1558151 - libuser needs audit events around the account
                             lifecycle


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-19
changelog:
  - Resolves: rhbz#1602600 -  Please review important issues found by covscan
                              in "libuser-0.62-14.el8+7" package


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-20
changelog:
  - Resolves: rhbz#1637398 - libuser-python3 should be renamed to comply
                             with Packaging Guidelines


author: Jakub Hrozek <jhrozek@redhat.com> - 0.62-23
changelog:
  - Actually apply the patch from the previous build
  - Resolves: rhbz#1670997 - Amend the user lifecycle auditing


author: Miroslav Lichvar <mlichvar@redhat.com> - 1.1.6-14
changelog:
  - build with hardening LDFLAGS (#1548717)
  - remove obsolete macro and comments
  - add gcc to build requirements


author: Harald Hoyer <harald@redhat.com> - 16-1
changelog:
  - libvarlink 16
  - fixed coverity issues
  - Resolves: #1638294 - Interface name validation rule update


author: Björn Esser <besser82@fedoraproject.org> - 4.0.1-5
changelog:
  - Add patch to update to recent development branch
  - Re-enable SUNMD5 support as it is BSD licensed now
  - Build compatibility symbols for glibc only
  - Skip failing testsuite once


author: David King <dking@redhat.com> - 2.9.7-10
changelog:
  - Fix CVE-2021-3516 (#1956976)
  - Fix CVE-2021-3517 (#1957001)
  - Fix CVE-2021-3518 (#1957028)
  - Fix CVE-2021-3537 (#1957284)


author: Daniel Veillard <veillard@redhat.com> 2.6.27-1
changelog:
  - upstream release 2.6.27 see http://xmlsoft.org/news.html
  - very large amount of bug fixes reported upstream


author: Daniel Veillard <veillard@redhat.com> 2.7.0-1.fc10
changelog:
  - upstream release of 2.7.0
  - switch to XML 1.0 5th edition
  - switch to RFC 3986 for URI parsing
  - better entity handling
  - option to remove hardcoded limitations in the parser
  - more testing
  - a new API to allocate entity nodes
  - and lot of fixes and clanups


author: Daniel Veillard <veillard@redhat.com> 2.7.2-1.fc10
changelog:
  - new release 2.7.2
  - Fixes the known problems in 2.7.1
  - increase the set of options when saving documents


author: Daniel Veillard <veillard@redhat.com> - 2.7.3-1
changelog:
  - new release 2.7.3
  - limit default max size of text nodes
  - special parser mode for PHP
  - bug fixes and more compiler checks


author: Daniel Veillard <veillard@redhat.com> - 2.7.4-1
changelog:
  - upstream release 2.7.4
  - symbol versioning of libxml2 shared libs
  - very large number of bug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.7.7-1
changelog:
  - Upstream release of 2.7.7
  - fix serious trouble with zlib >= 1.2.4
  - xmllint new option --xpath
  - various HTML parser improvements
  - includes a number of nug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.7.8-1
changelog:
  - Upstream release of 2.7.8
  - various bug fixes, including potential crashes
  - new non-destructive formatting option
  - date parsing updated to RFC 5646


author: Daniel Veillard <veillard@redhat.com> - 2.9.0-0rc1
changelog:
  - upstream release candidate 1 of 2.9.0
  - introduce a small API change, but ABI compatible, see
    https://mail.gnome.org/archives/xml/2012-August/msg00005.html
    patches for php, gcc/libjava and evolution-data-connector are upstream
    Grab me in cases of problems veillard@redhat.com
  - many bug fixes including security aspects and small improvements


author: Daniel Veillard <veillard@redhat.com> - 2.9.0-1
changelog:
  - upstream release of 2.9.0
  - A few new API entry points
  - More resilient push parser mode
  - A lot of portability improvement
  - Faster XPath evaluation
  - a lot of bug fixes and smaller improvement


author: Daniel Veillard <veillard@redhat.com> - 2.9.0-2
changelog:
  - remaining cleanups from merge bug rhbz#226079
  - do not put the docs in the main package, only in -devel rhbz#864731


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-1
changelog:
  - upstream release of 2.9.1
  - a couple more API entry point
  - compatibility with python3
  - a lot of bug fixes


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.9.2-8
changelog:
  - Remove executable permissions from documentation.  Complies with packaging
    guidelines and solves issue of libxml2-python3 package depending on python2


author: Daniel Veillard <veillard@redhat.com> - 2.9.2-1
changelog:
  - upstream release of 2.9.3
  - Fixes for CVE-2015-8035, CVE-2015-7942, CVE-2015-7941, CVE-2015-1819
    CVE-2015-7497, CVE-2015-7498, CVE-2015-5312, CVE-2015-7499, CVE-2015-7500
    and CVE-2015-8242
  - many other bug fixes


author: Kevin Fenzi <kevin@scrye.com> - 2.9.4-1
changelog:
  - Update to 2.9.4.
  - Apply very hacky patch that removes the no longer in python-3.6 PyVerify_fd symbol.


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.9.4-5
changelog:
  - Python 2 binary package renamed to python2-libxml2
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: David King <dking@redhat.com> - 2.9.7-9.1
changelog:
  - Fix CVE-2021-3516 (#1956975)
  - Fix CVE-2021-3517 (#1957000)
  - Fix CVE-2021-3518 (#1957027)
  - Fix CVE-2021-3537 (#1957283)


author: Xin Long <lxin@redhat.com> - 1.0.18-3
changelog:
  - Added a patch to fix netinet/sctp.h not to be installed.
  - Added some fixes for kernel feature detection.


author: Aaron Conole <aconole@redhat.com> - 1.0.1-14.git036e314
changelog:
  - Update to branch-1.1 compatibility
  - Fixes to avoid assert in the agent state machine
  - Remove the memory constraint on the event socket buffer (#1554110)


author: Ondřej Lysoněk <olysonek@redhat.com> - 3.4.0-21.20180522git70f7e08
changelog:
  - Fix printing CPU info on non-x86 architectures in sensors-detect
  - Resolves: rhbz#1752854
  - Fix printing lm_sensors version in sensors-detect and pwmconfig
  - Resolves: rhbz#1677414


author: Artem Egorenkov <aegorenk@redhat.com> - 3.4.0-23
changelog:
  - New flag for no sensors added. This flag is used in VM environment
    to make sensors binaries not fail if no sensors was detected.


author: Fedora Release Engineering <releng@fedoraproject.org> - 1.0.4-0.27.20111007git
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
  - Explicitly include <sys/sysmacros.h> due to glibc-headers changes.
  Definition of major and minor macros is no longer transitively included
  through <sys/types.h>, hence make it explicit.
  Ref:
  https://sourceware.org/git/?p=glibc.git;a=blob_plain;f=NEWS;hb=HEAD


author: Kamil Dudka <kdudka@redhat.com> - 3.14.0-3
changelog:
  - fix programming mistakes detected by Coverity Analysis
  - document the --version option in the logrotate(8) man page (#1611498)


author: Kamil Dudka <kdudka@redhat.com> - 3.14.0-4
changelog:
  - logrotate.8: encourage admins to use the `su` directive (#1759770)
  - do not abort globbing on broken symlink (#1723265)


author: Lianbo Jiang <lijiang@redhat.com> - B.02.18-22
changelog:
  - Display proper logical name of network device
  - Resolves: rhbz#1724087
  - Add DIMM running speed and Print dimm rank information
  - Resolves: rhbz#1725199


author: Jan Rybar <jrybar@redhat.com> - 4.93.2-1
changelog:
  - Rebase to lsof-4.93.2
  - Upstream moved to GitHub (original unreachable) and tarball structure changed
  - Manpage patch needed to reflect the tarball changes
  - Resolves: rhbz#1778228


author: Tomas Bzatek <tbzatek@redhat.com> - 0.32-1
changelog:
  - Upgrade to 0.32 upstream snapshot (#1855766)
  - Fix NVMe device parsing (#1687841, #1845977)
  - Fix WWN string reporting (#1846559)
  - Implement SCSI identifier sort priority (#1846566)


author: Robert Scheck <robert@fedoraproject.org> - 1.03-13
changelog:
  - Added patch by Khem Raj to use static inlines as the external
    inline definition has changed with GCC 5 (to fix ppc64 builds)


author: Patsy Griffin Franklin <pfrankli@redhat.com> 1:4.2.1-7
changelog:
  - Fix build failure caused by automake versioning differences related
    to the glob changes. (#1589769)
  - Fix testing failure due to Perl changes related to expanding paths.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix build for some odd situations, such as
    - previously installed make != GNU make
    - /bin/sh != bash


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - assume we don't have clock_gettime in configure, so that
    make is not linked against -lpthread (and thus does not
    limit stack to 2MB).


author: Jakub Jelinek <jakub@redhat.com> 3.80-8
changelog:
  - make sure errno for error reporting is not lost accross _() calls
  - report EOF on read pipe differently from read returning < 0 reporting


author: Petr Machata <pmachata@redhat.com> 1:3.80-11
changelog:
  - Applied (five years old) patch from Jonathan Kamens to allow make to
    handle several pattern-specific variables (#52962).

    The patch was changed so that it forces make to process pattern
    specific variables in the same order as they appear in file.
    (Upstream make behaves this way, too.)  This is change from old make
    behavior, which processed the variables in reverse order.  In case
    you used only x=a assignments, this had the effect of using the
    first pattern specific variable that matched.  For x+=a this just
    doesn't work, and it produces absolutely nonintuitive results.

  - (It would be great if make's target-specific variables were handled
    the same way as pattern-specific ones, just without the pattern
    component.  However current handling is documented and considered a
    feature.)


author: Petr Machata <pmachata@redhat.com> - 1:3.81-1
changelog:
  - Upstream 3.81:
    - Contains several backwards incompatible changes.  See NEWS inside
      the source package to find out more.
  - memory patch and error reporting patch were ported to this version.


author: Petr Machata <pmachata@redhat.com> - 1:3.81-4
changelog:
  - Tidy up the specfile per rpmlint comments
  - Use utf-8 and fix national characters in contributor's names


author: Petr Machata <pmachata@redhat.com> - 1:3.81-12
changelog:
  - Fix the rlimit patch.  The success flag is kept in memory shared
    with parent process after vfork, and so cannot be reset.
  - Related: #214033


author: Petr Machata <pmachata@redhat.com> - 1:3.82-1
changelog:
  - Upstream 3.82:
    - Drop rlimit, fdleak, strcpy-overlap, recursion-test, double-free
      patches, make supports this functionality now
    - Disable the memory patch for the time being
    - Port remaining patches
    - Add weird-shell patch, upstream bug 30748
  - Resolves: #618998


author: Petr Machata <pmachata@redhat.com> - 1:3.82-4
changelog:
  - Fix a discrepancy between behavior of find_next_token and
    pre-allocation of token memory in func_sort.
  - Resolves: #643359


author: Petr Machata <pmachata@redhat.com> - 1:3.82-10
changelog:
  - Apply the following patches, proposed upstream by Norbert Thiebaud:
    - A patch for warning on call of undefined function
    - A patch for tracing calls to "eval" and "call"


author: Petr Machata <pmachata@redhat.com> - 1:3.82-18
changelog:
  - Backport upstream patch that adds wildcard expansion to pattern
    rules. (make-3.82-stem_glob.patch)


author: Petr Machata <pmachata@redhat.com> - 1:3.82-19
changelog:
  - make now restores rlimit to its original values before launching
    subprocess via $(shell) (make-3.82-func_shell-rlimit.patch)
  - Determinize one test (make-3.82-tests-SECONDARY.patch)


author: Kyle McMartin <kyle@fedoraproject.org> - 1:4.0-3.1
changelog:
  - Pass the test-suite unconditionally until I fix the tests to cope with
    deterministic ar archives (which result in expected rebuilds not occuring)


author: Patsy Franklin <pfrankli@redhat.com> 1:4.1-2
changelog:
  - Include patches dropped in last update as they fix reported bugs and
    update the spec file to include more info on the patches.


author: Nikola Forró <nforro@redhat.com> - 2.7.6.1-18
changelog:
  - schedule interrupted cache update for the next boot, instead of blocking
    system reboot/shutdown
    resolves #1874010


author: Jon Masters <jcm@redhat.com> 2:1.0-0.1.pre3
changelog:
  - Bump epoch and use standard Fedora Packaging Guidelines for NVR.
  - Switch to using signed bz2 source and remove dead patch.


author: Prarit Bhargava <prarit@redhat.com> 2:1.0-0.3.6e4e2a00
changelog:
  - Updated sources to deal with various warning issues [701083] [704302]
  - Update URL for new location of Andi's mcelog tree
  - Update n-v-r to include latest git hash


author: Prarit Bhargava <prarit@redhat.com> 2:1.0-0.10.f0d7654
changelog:
  - updated to latest mcelog
  - removed mcelog-fix-trigger-path-and-cacheing.patch. AFAICT triggers are
    correctly installed
  - added mcelog-disable-cron-job.patch as mcelog runs in daemon mode by
    default in Fedora


author: Prarit Bhargava <prarit@redhat.com> - 3:160-1
changelog:
  - Deduce channel number for Haswell/Broadwell/Skylake systems [1641046]
  - Add decoding for Optane DC persistent memory mode [1645344]


author: Prarit Bhargava <prarit@redhat.com> - 3:173-0
changelog:
  - Update to v173
  - adds support for Tigerlake, Rocketlake, Alderlake, Lakefield
  - adds support for CometLake, Icelake server, Icelake-D, and Snow Ridge


author: Vit Mojzis <vmojzis@redhat.com> - 2.9-2
changelog:
  - Revert "mcstransd select correct colour range." (#1731451)
  - Fix mcstrans secolor examples (#1731451)


author: Xiao Ni <xni@redhat.com> - 4.1.12
changelog:
  - Update mdadm to latest upstream && change tmpfiles directory && correct changelog date
  - Resolves rhbz#1800521 and rhbz#1657265


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.01-14
changelog:
  - Removed some spec artifacts (like buildroot cleaning)
  - Fixed malformed "Loading" banner
  - Not relocating memtest86+ above 1 MB
    Related: rhbz#1303804
  - Introduced new configuration file (/etc/memtest86+.conf)
  - Introduced new memtest-setup switches for selecting ELF/non-ELF versions
    Resolves: rhbz#1303804


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20201112-1
changelog:
  - Update Intel CPU microcode to microcode-20201112 release (#1896912):
    - Addition of 06-8a-01/0x10 (LKF B2/B3) microcode at revision 0x28;
    - Update of 06-7a-01/0x01 (GLK B0) microcode from revision 0x32 up
      to 0x34;
    - Updated releasenote file.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20201112-2
changelog:
  - Do not use "grep -q" in a pipe in check_caveats (#1902021).
  - Add 06-55-04/06-55-06/06-55-07 (SKX-SP/CLX-SP) microcode-20201110 caveats
    (#1902884).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20210216-1
changelog:
  - Update Intel CPU microcode to microcode-20210216 release (#1902884):
    - Update of 06-55-04/0xb7 (SKX-D/SP/W/X H0/M0/M1/U0) microcode (in
      intel-06-55-04/intel-ucode/06-55-04) from revision 0x2006a08 up
      to 0x2006a0a;
    - Update of 06-55-06/0xbf (CLX-SP B0) microcode from revision 0x4003003
      up to 0x4003006;
    - Update of 06-55-07/0xbf (CLX-SP/W/X B1/L1) microcode from revision
      0x5003003 up to 0x5003006.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20210525-1
changelog:
  - Update Intel CPU microcode to microcode-20210525 release, addresses
    CVE-2020-24489, CVE-2020-24511, CVE-2020-24512, and CVE-2020-24513
    (#1962664, #1962714, #1962734, #1962680):
    - Addition of 06-55-05/0xb7 (CLX-SP A0) microcode at revision 0x3000010;
    - Addition of 06-6a-05/0x87 (ICX-SP C0) microcode at revision 0xc0002f0;
    - Addition of 06-6a-06/0x87 (ICX-SP D0) microcode at revision 0xd0002a0;
    - Addition of 06-86-04/0x01 (SNR B0) microcode at revision 0xb00000f;
    - Addition of 06-86-05/0x01 (SNR B1) microcode (in intel-ucode/06-86-04)
      at revision 0xb00000f;
    - Addition of 06-86-04/0x01 (SNR B0) microcode (in intel-ucode/06-86-05)
      at revision 0xb00000f;
    - Addition of 06-86-05/0x01 (SNR B1) microcode at revision 0xb00000f;
    - Addition of 06-8c-02/0xc2 (TGL-R C0) microcode at revision 0x16;
    - Addition of 06-8d-01/0xc2 (TGL-H R0) microcode at revision 0x2c;
    - Addition of 06-96-01/0x01 (EHL B1) microcode at revision 0x11;
    - Addition of 06-9c-00/0x01 (JSL A0/A1) microcode at revision 0x1d;
    - Addition of 06-a7-01/0x02 (RKL-S B0) microcode at revision 0x40;
    - Update of 06-4e-03/0xc0 (SKL-U/U 2+3e/Y D0/K1) microcode (in
      intel-06-4e-03/intel-ucode/06-4e-03) from revision 0xe2 up to 0xea;
    - Update of 06-4f-01/0xef (BDX-E/EP/EX/ML B0/M0/R0) microcode (in
      intel-06-4f-01/intel-ucode/06-4f-01) from revision 0xb000038 up
      to 0xb00003e;
    - Update of 06-55-04/0xb7 (SKX-D/SP/W/X H0/M0/M1/U0) microcode (in
      intel-06-55-04/intel-ucode/06-55-04) from revision 0x2006a0a up
      to 0x2006b06;
    - Update of 06-5e-03/0x36 (SKL-H/S/Xeon E3 N0/R0/S0) microcode (in
      intel-06-5e-03/intel-ucode/06-5e-03) from revision 0xe2 up to 0xea;
    - Update of 06-8c-01/0x80 (TGL-UP3/UP4 B1) microcode (in
      intel-06-8c-01/intel-ucode/06-8c-01) from revision 0x68 up to 0x88;
    - Update of 06-8e-09/0x10 (AML-Y 2+2 H0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-09) from revision 0xde up
      to 0xea;
    - Update of 06-8e-09/0xc0 (KBL-U/U 2+3e/Y H0/J1) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-09) from revision 0xde up
      to 0xea;
    - Update of 06-8e-0a/0xc0 (CFL-U 4+3e D0, KBL-R Y0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0a) from revision 0xe0 up
      to 0xea;
    - Update of 06-8e-0b/0xd0 (WHL-U W0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0b) from revision 0xde up
      to 0xea;
    - Update of 06-8e-0c/0x94 (AML-Y 4+2 V0, CML-U 4+2 V0, WHL-U V0)
      microcode (in intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0c) from
      revision 0xde up to 0xea;
    - Update of 06-9e-09/0x2a (KBL-G/H/S/X/Xeon E3 B0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-09) from revision 0xde up
      to 0xea;
    - Update of 06-9e-0a/0x22 (CFL-H/S/Xeon E U0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0a) from revision 0xde up
      to 0xea;
    - Update of 06-9e-0b/0x02 (CFL-E/H/S B0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0b) from revision 0xde up
      to 0xea;
    - Update of 06-9e-0c/0x22 (CFL-H/S/Xeon E P0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0c) from revision 0xde up
      to 0xea;
    - Update of 06-9e-0d/0x22 (CFL-H/S/Xeon E R0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0d) from revision 0xde up
      to 0xea;
    - Update of 06-3f-02/0x6f (HSX-E/EN/EP/EP 4S C0/C1/M1/R2) microcode
      from revision 0x44 up to 0x46;
    - Update of 06-3f-04/0x80 (HSX-EX E0) microcode from revision 0x16 up
      to 0x19;
    - Update of 06-55-03/0x97 (SKX-SP B1) microcode from revision 0x1000159
      up to 0x100015b;
    - Update of 06-55-06/0xbf (CLX-SP B0) microcode from revision 0x4003006
      up to 0x4003102;
    - Update of 06-55-07/0xbf (CLX-SP/W/X B1/L1) microcode from revision
      0x5003006 up to 0x5003102;
    - Update of 06-55-0b/0xbf (CPX-SP A1) microcode from revision 0x700001e
      up to 0x7002302;
    - Update of 06-56-03/0x10 (BDX-DE V2/V3) microcode from revision
      0x7000019 up to 0x700001b;
    - Update of 06-56-04/0x10 (BDX-DE Y0) microcode from revision 0xf000017
      up to 0xf000019;
    - Update of 06-56-05/0x10 (BDX-NS A0/A1, HWL A1) microcode from revision
      0xe00000f up to 0xe000012;
    - Update of 06-5c-09/0x03 (APL D0) microcode from revision 0x40 up
      to 0x44;
    - Update of 06-5c-0a/0x03 (APL B1/F1) microcode from revision 0x1e up
      to 0x20;
    - Update of 06-5f-01/0x01 (DNV B0) microcode from revision 0x2e up
      to 0x34;
    - Update of 06-7a-01/0x01 (GLK B0) microcode from revision 0x34 up
      to 0x36;
    - Update of 06-7a-08/0x01 (GLK-R R0) microcode from revision 0x18 up
      to 0x1a;
    - Update of 06-7e-05/0x80 (ICL-U/Y D1) microcode from revision 0xa0
      up to 0xa6;
    - Update of 06-8a-01/0x10 (LKF B2/B3) microcode from revision 0x28 up
      to 0x2a;
    - Update of 06-a5-02/0x20 (CML-H R1) microcode from revision 0xe0 up
      to 0xea;
    - Update of 06-a5-03/0x22 (CML-S 6+2 G1) microcode from revision 0xe0
      up to 0xea;
    - Update of 06-a5-05/0x22 (CML-S 10+2 Q0) microcode from revision 0xe0
      up to 0xec;
    - Update of 06-a6-00/0x80 (CML-U 6+2 A0) microcode from revision 0xe0
      up to 0xe8;
    - Update of 06-a6-01/0x80 (CML-U 6+2 v2 K0) microcode from revision
      0xe0 up to 0xea.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20210525-2
changelog:
  - Make intel-06-2d-07, intel-06-4e-03, intel-06-4f-01, intel-06-55-04,
    intel-06-5e-03, intel-06-8c-01, intel-06-8e-9e-0x-0xca,
    and intel-06-8e-9e-0x-dell caveats dependent on intel caveat.
  - Enable 06-8c-01 microcode update by default (#1970611).
  - Enable 06-5e-03 microcode update by default (#1897673).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20210608-1
changelog:
  - Update Intel CPU microcode to microcode-20210608 release (#1921773):
    - Fixes in releasenote.md file.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20210608-1.20220204.1
changelog:
  - Update Intel CPU microcode to microcode-20220204 release, addresses
    CVE-2021-0127, CVE-2021-0145, CVE-2021-33120 (#2049541, #2049553, #2049570):
    - Removal of 06-86-04/0x01 (SNR B0) microcode at revision 0xb00000f;
    - Removal of 06-86-05/0x01 (SNR B1) microcode (in intel-ucode/06-86-04)
      at revision 0xb00000f;
    - Removal of 06-86-04/0x01 (SNR B0) microcode (in intel-ucode/06-86-05)
      at revision 0xb00000f;
    - Removal of 06-86-05/0x01 (SNR B1) microcode at revision 0xb00000f;
    - Update of 06-4e-03/0xc0 (SKL-U/U 2+3e/Y D0/K1) microcode (in
      intel-06-4e-03/intel-ucode/06-4e-03) from revision 0xea up to 0xec;
    - Update of 06-4f-01/0xef (BDX-E/EP/EX/ML B0/M0/R0) microcode (in
      intel-06-4f-01/intel-ucode/06-4f-01) from revision 0xb00003e up
      to 0xb000040;
    - Update of 06-55-04/0xb7 (SKX-D/SP/W/X H0/M0/M1/U0) microcode (in
      intel-06-55-04/intel-ucode/06-55-04) from revision 0x2006b06 up
      to 0x2006c0a;
    - Update of 06-5e-03/0x36 (SKL-H/S/Xeon E3 N0/R0/S0) microcode (in
      intel-06-5e-03/intel-ucode/06-5e-03) from revision 0xea up to 0xec;
    - Update of 06-8c-01/0x80 (TGL-UP3/UP4 B1) microcode (in
      intel-06-8c-01/intel-ucode/06-8c-01) from revision 0x88 up to 0x9a;
    - Update of 06-8e-09/0x10 (AML-Y 2+2 H0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-09) from revision 0xea up
      to 0xec;
    - Update of 06-8e-09/0xc0 (KBL-U/U 2+3e/Y H0/J1) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-09) from revision 0xea up
      to 0xec;
    - Update of 06-8e-0a/0xc0 (CFL-U 4+3e D0, KBL-R Y0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0a) from revision 0xea up
      to 0xec;
    - Update of 06-8e-0b/0xd0 (WHL-U W0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0b) from revision 0xea up
      to 0xec;
    - Update of 06-8e-0c/0x94 (AML-Y 4+2 V0, CML-U 4+2 V0, WHL-U V0)
      microcode (in intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0c) from
      revision 0xea up to 0xec;
    - Update of 06-9e-09/0x2a (KBL-G/H/S/X/Xeon E3 B0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-09) from revision 0xea up
      to 0xec;
    - Update of 06-9e-0a/0x22 (CFL-H/S/Xeon E U0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0a) from revision 0xea up
      to 0xec;
    - Update of 06-9e-0b/0x02 (CFL-E/H/S B0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0b) from revision 0xea up
      to 0xec;
    - Update of 06-9e-0c/0x22 (CFL-H/S/Xeon E P0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0c) from revision 0xea up
      to 0xec;
    - Update of 06-9e-0d/0x22 (CFL-H/S/Xeon E R0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0d) from revision 0xea up
      to 0xec;
    - Update of 06-3f-02/0x6f (HSX-E/EN/EP/EP 4S C0/C1/M1/R2) microcode
      from revision 0x46 up to 0x49;
    - Update of 06-3f-04/0x80 (HSX-EX E0) microcode from revision 0x19 up
      to 0x1a;
    - Update of 06-55-03/0x97 (SKX-SP B1) microcode from revision 0x100015b
      up to 0x100015c;
    - Update of 06-55-06/0xbf (CLX-SP B0) microcode from revision 0x4003102
      up to 0x400320a;
    - Update of 06-55-07/0xbf (CLX-SP/W/X B1/L1) microcode from revision
      0x5003102 up to 0x500320a;
    - Update of 06-55-0b/0xbf (CPX-SP A1) microcode from revision 0x7002302
      up to 0x7002402;
    - Update of 06-56-03/0x10 (BDX-DE V2/V3) microcode from revision
      0x700001b up to 0x700001c;
    - Update of 06-56-04/0x10 (BDX-DE Y0) microcode from revision 0xf000019
      up to 0xf00001a;
    - Update of 06-56-05/0x10 (BDX-NS A0/A1, HWL A1) microcode from revision
      0xe000012 up to 0xe000014;
    - Update of 06-5c-09/0x03 (APL D0) microcode from revision 0x44 up
      to 0x46;
    - Update of 06-5c-0a/0x03 (APL B1/F1) microcode from revision 0x20 up
      to 0x24;
    - Update of 06-5f-01/0x01 (DNV B0) microcode from revision 0x34 up
      to 0x36;
    - Update of 06-6a-06/0x87 (ICX-SP D0) microcode from revision 0xd0002a0
      up to 0xd000331;
    - Update of 06-7a-01/0x01 (GLK B0) microcode from revision 0x36 up
      to 0x38;
    - Update of 06-7a-08/0x01 (GLK-R R0) microcode from revision 0x1a up
      to 0x1c;
    - Update of 06-7e-05/0x80 (ICL-U/Y D1) microcode from revision 0xa6
      up to 0xa8;
    - Update of 06-8a-01/0x10 (LKF B2/B3) microcode from revision 0x2a up
      to 0x2d;
    - Update of 06-8c-02/0xc2 (TGL-R C0) microcode from revision 0x16 up
      to 0x22;
    - Update of 06-8d-01/0xc2 (TGL-H R0) microcode from revision 0x2c up
      to 0x3c;
    - Update of 06-96-01/0x01 (EHL B1) microcode from revision 0x11 up
      to 0x15;
    - Update of 06-9c-00/0x01 (JSL A0/A1) microcode from revision 0x1d up
      to 0x2400001f;
    - Update of 06-a5-02/0x20 (CML-H R1) microcode from revision 0xea up
      to 0xec;
    - Update of 06-a5-03/0x22 (CML-S 6+2 G1) microcode from revision 0xea
      up to 0xec;
    - Update of 06-a5-05/0x22 (CML-S 10+2 Q0) microcode from revision 0xec
      up to 0xee;
    - Update of 06-a6-00/0x80 (CML-U 6+2 A0) microcode from revision 0xe8
      up to 0xea;
    - Update of 06-a6-01/0x80 (CML-U 6+2 v2 K1) microcode from revision
      0xea up to 0xec;
    - Update of 06-a7-01/0x02 (RKL-S B0) microcode from revision 0x40 up
      to 0x50.


author: Dave Jones <davej@redhat.com>
changelog:
  - Only enable microcode_ctl service if the CPU is capable.
  - Prevent microcode_ctl getting restarted multiple times on initlevel change (#141581)
  - Make restart/reload work properly
  - Do nothing if not started by root.


author: Dave Jones <davej@redhat.com>
changelog:
  - Create/remove the /dev/cpu/microcode dev node as needed.
  - Use correct path again for the microcode.dat.
  - Remove some no longer needed tests in the init script.


author: Dave Jones <davej@redhat.com>
changelog:
  - Drop the node creation/deletion change from previous release.
    It'll cause grief with selinux, and was a hack to get around
    a udev shortcoming that should be fixed properly.


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Spec cleanup and macro standardization.
  - Update license
  - Update microcode data file to 20080131 revision.


author: Dave Jones <davej@redhat.com>
changelog:
  - Shorten sleep time during init.
    This really needs to be replaced with proper udev hooks, but this is
    a quick interim fix.


author: Kyle McMartin <kyle@redhat.com> 1.17-1.56
changelog:
  - Add AMD x86/x86-64 microcode. (Dated: 2009-10-09)
    Doesn't need microcode_ctl modifications as it's loaded by
    request_firmware() like any other sensible driver.
  - Eventually, this AMD firmware can probably live inside
    kernel-firmware once it is split out.


author: Anton Arapov <anton@redhat.com> 1.17-18
changelog:
  - Ship splitted microcode for Intel CPUs [#690930]
  - Include tool for splitting microcode for Intl CPUs (Kay Sievers )


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20190514a-2
changelog:
  - Remove disclaimer, as it is not as important now to justify kmsg/log
    pollution; its contents are partially adopted in README.caveats.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20190918-1
changelog:
  - Intel CPU microcode update to 20190918 (#1753544).
  - Add new disclaimer, generated based on relevant caveats.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20191112-1
changelog:
  - Intel CPU microcode update to 20191112, addresses CVE-2017-5715,
    CVE-2019-0117, CVE-2019-11135, CVE-2019-11139 (#1755019, #1764060, #1764073,
      - Addition of 06-a6-00/0x80 (CML-U 6+2 A0) microcode at revision 0xc6;
    - Addition of 06-66-03/0x80 (CNL-U D0) microcode at revision 0x2a;
    - Addition of 06-55-03/0x97 (SKL-SP B1) microcode at revision 0x1000150;
    - Addition of 06-7e-05/0x80 (ICL-U/Y D1) microcode at revision 0x46;
    - Update of 06-4e-03/0xc0 (SKL-U/Y D0) microcode from revision 0xcc to 0xd4;
    - Update of 06-5e-03/0x36 (SKL-H/S/Xeon E3 R0/N0) microcode from revision 0xcc
      to 0xd4
    - Update of 06-8e-09/0x10 (AML-Y 2+2 H0) microcode from revision 0xb4 to 0xc6;
    - Update of 06-8e-09/0xc0 (KBL-U/Y H0) microcode from revision 0xb4 to 0xc6;
    - Update of 06-8e-0a/0xc0 (CFL-U 4+3e D0) microcode from revision 0xb4
      to 0xc6;
    - Update of 06-8e-0b/0xd0 (WHL-U W0) microcode from revision 0xb8 to 0xc6;
    - Update of 06-8e-0c/0x94 (AML-Y V0) microcode from revision 0xb8 to 0xc6;
    - Update of 06-8e-0c/0x94 (CML-U 4+2 V0) microcode from revision 0xb8 to 0xc6;
    - Update of 06-8e-0c/0x94 (WHL-U V0) microcode from revision 0xb8 to 0xc6;
    - Update of 06-9e-09/0x2a (KBL-G/X H0) microcode from revision 0xb4 to 0xc6;
    - Update of 06-9e-09/0x2a (KBL-H/S/Xeon E3 B0) microcode from revision 0xb4
      to 0xc6;
    - Update of 06-9e-0a/0x22 (CFL-H/S/Xeon E U0) microcode from revision 0xb4
      to 0xc6;
    - Update of 06-9e-0b/0x02 (CFL-S B0) microcode from revision 0xb4 to 0xc6;
    - Update of 06-9e-0d/0x22 (CFL-H R0) microcode from revision 0xb8 to 0xc6.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20191112-2
changelog:
  - Package the publicy available microcode-20191112 release (#1755027):
    - Addition of 06-4d-08/0x1 (AVN B0/C0) microcode at revision 0x12d;
    - Addition of 06-55-06/0xbf (CSL-SP B0) microcode at revision 0x400002c;
    - Addition of 06-7a-08/0x1 (GLK R0) microcode at revision 0x16;
    - Update of 06-55-03/0x97 (SKL-SP B1) microcode from revision 0x1000150
      up to 0x1000151;
    - Update of 06-55-04/0xb7 (SKL-SP H0/M0/U0, SKL-D M1) microcode from revision
      0x2000064 up to 0x2000065;
    - Update of 06-55-07/0xbf (CSL-SP B1) microcode from revision 0x500002b
      up to 0x500002c;
    - Update of 06-7a-01/0x1 (GLK B0) microcode from revision 0x2e up to 0x32;
  - Include 06-9e-0c (CFL-H/S P0) microcode from the microcode-20190918 release.
  - Correct the releasenote file (0001-releasenote-changes-summary-fixes.patch).
  - Update README.caveats with the link to the new Knowledge Base article.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20191113-1
changelog:
  - Update Intel CPU microcode to microcode-20191113 release:
    - Update of 06-9e-0c (CFL-H/S P0) microcode from revision 0xae up to 0xc6.
  - Drop 0001-releasenote-changes-summary-fixes.patch.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20191115-1
changelog:
  - Update Intel CPU microcode to microcode-20191115 release:
    - Update of 06-4e-03/0xc0 (SKL-U/Y D0) from revision 0xd4 up to 0xd6;
    - Update of 06-5e-03/0x36 (SKL-H/S/Xeon E3 R0/N0) from revision 0xd4
      up to 0xd6;
    - Update of 06-8e-09/0x10 (AML-Y 2+2 H0) from revision 0xc6 up to 0xca;
    - Update of 06-8e-09/0xc0 (KBL-U/Y H0) from revision 0xc6 up to 0xca;
    - Update of 06-8e-0a/0xc0 (CFL-U 4+3e D0) from revision 0xc6 up to 0xca;
    - Update of 06-8e-0b/0xd0 (WHL-U W0) from revision 0xc6 up to 0xca;
    - Update of 06-8e-0c/0x94 (AML-Y V0, CML-U 4+2 V0, WHL-U V0) from revision
      0xc6 up to 0xca;
    - Update of 06-9e-09/0x2a (KBL-G/X H0, KBL-H/S/Xeon E3 B0) from revision 0xc6
      up to 0xca;
    - Update of 06-9e-0a/0x22 (CFL-H/S/Xeon E U0) from revision 0xc6 up to 0xca;
    - Update of 06-9e-0b/0x02 (CFL-S B0) from revision 0xc6 up to 0xca;
    - Update of 06-9e-0c/0x22 (CFL-S/Xeon E P0) from revision 0xc6 up to 0xca;
    - Update of 06-9e-0d/0x22 (CFL-H/S R0) from revision 0xc6 up to 0xca;
    - Update of 06-a6-00/0x80 (CML-U 6+2 A0) from revision 0xc6 up to 0xca.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20191115-3
changelog:
  - Update stale posttrans dependency, add triggers for proper handling
    of the debug kernel flavour along with kernel-rt (#1766178).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20191115-5
changelog:
  - Re-generate initramfs not only for the currently running kernel,
    but for several recently installed kernels as well (#1773338).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200508-1
changelog:
  - Update Intel CPU microcode to microcode-20200508 release (#1783103):
    - Update of 06-7e-05/0x80 (ICL-U/Y D1) microcode from revision 0x46
      up to 0x78.
  - Change the URL to point to the GitHub repository since the microcode download
    section at Intel Download Center does not exist anymore.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200520-1
changelog:
  - Update Intel CPU microcode to microcode-20200520 release (#1783103):
    - Update of 06-2d-06/0x6d (SNB-E/EN/EP C1/M0) microcode from revision 0x61f
      up to 0x621;
    - Update of 06-2d-07/0x6d (SNB-E/EN/EP C2/M1) microcode from revision 0x718
      up to 0x71a.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200602-1
changelog:
  - Update Intel CPU microcode to microcode-20200602 release, addresses
    CVE-2020-0543, CVE-2020-0548, CVE-2020-0549 (#1795354, #1795356, #1827184):
    - Update of 06-3c-03/0x32 (HSW C0) microcode from revision 0x27 up to 0x28;
    - Update of 06-3d-04/0xc0 (BDW-U/Y E0/F0) microcode from revision 0x2e
      up to 0x2f;
    - Update of 06-45-01/0x72 (HSW-U C0/D0) microcode from revision 0x25
      up to 0x26;
    - Update of 06-46-01/0x32 (HSW-H C0) microcode from revision 0x1b up to 0x1c;
    - Update of 06-47-01/0x22 (BDW-H/Xeon E3 E0/G0) microcode from revision 0x21
      up to 0x22;
    - Update of 06-4e-03/0xc0 (SKL-U/Y D0) microcode from revision 0xd6
      up to 0xdc;
    - Update of 06-55-03/0x97 (SKX-SP B1) microcode from revision 0x1000151
      up to 0x1000157;
    - Update of 06-55-04/0xb7 (SKX-SP H0/M0/U0, SKX-D M1) microcode
      (in intel-06-55-04/intel-ucode/06-55-04) from revision 0x2000065
      up to 0x2006906;
    - Update of 06-55-06/0xbf (CLX-SP B0) microcode from revision 0x400002c
      up to 0x4002f01;
    - Update of 06-55-07/0xbf (CLX-SP B1) microcode from revision 0x500002c
      up to 0x5002f01;
    - Update of 06-5e-03/0x36 (SKL-H/S R0/N0) microcode from revision 0xd6
      up to 0xdc;
    - Update of 06-8e-09/0x10 (AML-Y22 H0) microcode from revision 0xca
      up to 0xd6;
    - Update of 06-8e-09/0xc0 (KBL-U/Y H0) microcode from revision 0xca
      up to 0xd6;
    - Update of 06-8e-0a/0xc0 (CFL-U43e D0) microcode from revision 0xca
      up to 0xd6;
    - Update of 06-8e-0b/0xd0 (WHL-U W0) microcode from revision 0xca
      up to 0xd6;
    - Update of 06-8e-0c/0x94 (AML-Y42 V0, CML-Y42 V0, WHL-U V0) microcode
      from revision 0xca up to 0xd6;
    - Update of 06-9e-09/0x2a (KBL-G/H/S/X/Xeon E3 B0) microcode from revision
      0xca up to 0xd6;
    - Update of 06-9e-0a/0x22 (CFL-H/S/Xeon E3 U0) microcode from revision 0xca
      up to 0xd6;
    - Update of 06-9e-0b/0x02 (CFL-S B0) microcode from revision 0xca up to 0xd6;
    - Update of 06-9e-0c/0x22 (CFL-H/S P0) microcode from revision 0xca
      up to 0xd6;
    - Update of 06-9e-0d/0x22 (CFL-H R0) microcode from revision 0xca up to 0xd6.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200602-3
changelog:
  - Do not update 06-4e-03 (SKL-U/Y) and 06-5e-03 (SKL-H/S/Xeon E3 v5) to revision
    0xdc, use 0xd6 by default (#1846119).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200609-1
changelog:
  - Update Intel CPU microcode to microcode-20200609 release (#1845967):
    - Fixed a typo in the release note file.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200609-2
changelog:
  - Blacklist latest microcode revision for 06-[89]e-0x CPUs (AML-Y,
    CFL-H/S/U/Xeon E, CML-Y, KBL-G/H/S/X/U/Y/Xeon E3 v6, WHL-U) on Dell systems,
    use revision 0xae/0xb4/0xb8 by default, provide the latest revision
    and intermediate revision 0xca in caveats (#1807960, #1846097).


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20200609-3
changelog:
  - Add README file to the documentation directory.
  - Add publicly-sourced codenames list to supply to gen_provides.sh; update
    the latter to handle the somewhat different format.
  - Add SUMMARY.intel-ucode file containing metadata information from
    the microcode file headers.


author: Eugene Syromiatnikov <esyr@redhat.com> - 4:20201027-1
changelog:
  - Update Intel CPU microcode to microcode-20201027 release, addresses
    CVE-2020-8694, CVE-2020-8695, CVE-2020-8696, CVE-2020-8698
    (#1893266, #1893254, #1893234):
    - Addition of 06-55-0b/0xbf (CPX-SP A1) microcode at revision 0x700001e;
    - Addition of 06-8c-01/0x80 (TGL-UP3/UP4 B1) microcode at revision 0x68;
    - Addition of 06-a5-02/0x20 (CML-H R1) microcode at revision 0xe0;
    - Addition of 06-a5-03/0x22 (CML-S 6+2 G1) microcode at revision 0xe0;
    - Addition of 06-a5-05/0x22 (CML-S 10+2 Q0) microcode at revision 0xe0;
    - Addition of 06-a6-01/0x80 (CML-U 6+2 v2 K0) microcode at revision
      0xe0;
    - Update of 06-4e-03/0xc0 (SKL-U/U 2+3e/Y D0/K1) microcode (in
      intel-06-4e-03/intel-ucode/06-4e-03) from revision 0xdc up to 0xe2;
    - Update of 06-55-04/0xb7 (SKX-D/SP/W/X H0/M0/M1/U0) microcode (in
      intel-06-55-04/intel-ucode/06-55-04) from revision 0x2006906 up
      to 0x2006a08;
    - Update of 06-5e-03/0x36 (SKL-H/S/Xeon E3 N0/R0/S0) microcode (in
      intel-06-5e-03/intel-ucode/06-5e-03) from revision 0xdc up to 0xe2;
    - Update of 06-8e-09/0x10 (AML-Y 2+2 H0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-09) from revision 0xd6 up
      to 0xde;
    - Update of 06-8e-09/0xc0 (KBL-U/U 2+3e/Y H0/J1) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-09) from revision 0xd6 up
      to 0xde;
    - Update of 06-8e-0a/0xc0 (CFL-U 4+3e D0, KBL-R Y0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0a) from revision 0xd6 up
      to 0xe0;
    - Update of 06-8e-0b/0xd0 (WHL-U W0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0b) from revision 0xd6 up
      to 0xde;
    - Update of 06-8e-0c/0x94 (AML-Y 4+2 V0, CML-U 4+2 V0, WHL-U V0)
      microcode (in intel-06-8e-9e-0x-dell/intel-ucode/06-8e-0c) from
      revision 0xd6 up to 0xde;
    - Update of 06-9e-09/0x2a (KBL-G/H/S/X/Xeon E3 B0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-09) from revision 0xd6 up
      to 0xde;
    - Update of 06-9e-0a/0x22 (CFL-H/S/Xeon E U0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0a) from revision 0xd6 up
      to 0xde;
    - Update of 06-9e-0b/0x02 (CFL-E/H/S B0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0b) from revision 0xd6 up
      to 0xde;
    - Update of 06-9e-0c/0x22 (CFL-H/S/Xeon E P0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0c) from revision 0xd6 up
      to 0xde;
    - Update of 06-9e-0d/0x22 (CFL-H/S/Xeon E R0) microcode (in
      intel-06-8e-9e-0x-dell/intel-ucode/06-9e-0d) from revision 0xd6 up
      to 0xde;
    - Update of 06-3f-02/0x6f (HSX-E/EN/EP/EP 4S C0/C1/M1/R2) microcode
      from revision 0x43 up to 0x44;
    - Update of 06-55-03/0x97 (SKX-SP B1) microcode from revision 0x1000157
      up to 0x1000159;
    - Update of 06-55-06/0xbf (CLX-SP B0) microcode from revision 0x4002f01
      up to 0x4003003;
    - Update of 06-55-07/0xbf (CLX-SP/W/X B1/L1) microcode from revision
      0x5002f01 up to 0x5003003;
    - Update of 06-5c-09/0x03 (APL D0) microcode from revision 0x38 up
      to 0x40;
    - Update of 06-5c-0a/0x03 (APL B1/F1) microcode from revision 0x16 up
      to 0x1e;
    - Update of 06-7a-08/0x01 (GLK-R R0) microcode from revision 0x16 up
      to 0x18;
    - Update of 06-7e-05/0x80 (ICL-U/Y D1) microcode from revision 0x78
      up to 0xa0;
    - Update of 06-a6-00/0x80 (CML-U 6+2 A0) microcode from revision 0xca
      up to 0xe0.


author: Ales Matej <amatej@redhat.com> - 3.4.0-1
changelog:
  - Update to 3.4.0
  - Fix: do not download metadata in remove command
  - Add reinstall command
  - Add "--setopt=tsflags=test" support
  - Add "--setopt=reposdir=<path>" and "--setopt=varsdir=<path1>,<path2>,..." support
  - Add "--config=<path_to_config_file>" support
  - Add "--disableplugin", "--enableplugin" support (RhBug:1781126)
  - Add "--noplugins" support
  - Add "--setopt=cachedir=<path_to_cache_directory>" support
  - Add "--installroot=<path_to_installroot_directory>" support
  - Add "--refresh" support
  - Support "install_weak_deps" conf option and "--setopt=install_weak_deps=0/1"
  - Respect reposdir from conf file
  - Respect "metadata_expire" conf file opton (RhBug:1771147)
  - [repolist] Print padding spaces only if output is terminal


author: Nicola Sella <nsella@redhat.com> - 3.4.0-3
changelog:
  - Patch: Add support for setting a platform module ID
  - Rename "update" command to "upgrade", "update" remain as compatibility alias


author: Pavla Kratochvilova <pkratoch@redhat.com> - 3.8.0-1
changelog:
  - Update to 3.8.0
  - Don't set default value of "assumeyes" to TRUE
  - Support for user confirmation and assumeyes, assumeno, defaultyes
  - Add commands: distro-sync, makecache
  - Add subcommands support
  - Add support for command aliases
  - Added alias "update" to "upgrade" command
  - Relicense to GPLv2+
  - Add support for setting allow_vendor_change
  - [download] Support for "--resolve", "--alldeps" and "--archlist=" arguments
  - [download] several optimizations
  - Support "--setopt=keepcache=0/1"
  - Extend "--setopt" to support repository options


author: Michal Hlavinka <mhlavink@redhat.com> 56-1
changelog:
  - Upgrade to 56 (#1479800)
  - fixes wait exit codes of co-processes when run in interactive mode (#1479320)


author: Michal Sekletar <msekleta@redhat.com> - 0.26-14
changelog:
  - start timer after the installation (#1278587)
  - make mlocate-updatedb.service of the type simple, systemd will then not wait for its completion (#1282232)


author: Javier Martinez Canillas <javierm@redhat.com> - 0.3.0-10
changelog:
  - Add mokutil code to consume data from /sys/firmware/efi/mok-variables/
    as well as attempting to consume numbered mok variables from efivarfs
    when mok-variables aren't present (pjones)
    Resolves: rhbz#1907418


author: James Paul Turner <jamesturner246@fedoraproject.org> - 3.1.6-1
changelog:
  - Update to MPFR version 3.1.6
  - Use autosetup specfile macro for applying patches (patches 1 and 2 applied)
  - Removed iconv calls, as they were breaking .info files, which are now unicode
    resolves #1299649
  - Other minor cleanups
  - BuildRequire gcc per https://fedoraproject.org/wiki/Packaging:C_and_C%2B%2B#BuildRequires_and_Requires


author: Miroslav Lichvar <mlichvar@redhat.com> 6.1-5.20180224
changelog:
  - fix crash in parsing of terminfo use capability (CVE-2018-10754)
  - add gcc-c++ to build requirements


author: Miroslav Lichvar <mlichvar@redhat.com> 6.1-8.20180224
changelog:
  - fix buffer overflow in terminfo entry hashtable (CVE-2019-17594)
  - handle missing character after backslash in terminfo entry (CVE-2019-17595)


author: Josef Ridky <jridky@redhat.com> - 1:5.8-14
changelog:
  - fix double free or corruption error when freeing security context (#1809077)
  - remove deprecated CFLAG


author: Josef Ridky <jridky@redhat.com> - 1:5.8-15
changelog:
  - proxied OIDs unspecified in proxy statement in snmpd.conf (#1658134)
  - UCD-SNMP-MIB::dskTable doesn't update dynamically (#1658185)
  - expand SNMPCONFPATH variable (#1660146)
  - remove file with Apple license (#1690936)
  - log meningful message on duplicate IP address (#1692286)
  - memory reporting adjustment (#1695497 and #1766521)
  - fix typos in man page (#1700262)
  - speedup ipAddressTable loading(#1700391)
  - fix memory leak when shut down librpm (#1763008)
  - services starts after network-online.target (#1775304)
  - add missing part of memory leak patch (#1829860)
  - add support for AES192 and AES256 (#1846252)


author: Josef Ridky <jridky@redhat.com> - 1:5.8-19
changelog:
  - revert permission of config files to 600 (#1601060)
  - fix error message when the address specified by clientaddr option
    is wrong or cannot be bound (#1877375)
  - log error with /proc/net/if_inet6 only when IPv6 is enabled (#1824367)
  - fix issue with quoting empty passphrase (#1817225)


author: Josef Ridky <jridky@redhat.com> - 1:5.8-21
changelog:
  - prevent parsing IP address twice (#1768908)
  - add support for digests detected from ECC certs (#1919714)
  - fix broken ErrorMsg at ucd-snmp (#1933150)
  - add support for intermediate certs (#1914656)
  - fix crash of certs with longer extension (#1908718)


author: Michal Ruprich <mruprich@redhat.com> - 2.0-0.50.20160912git
changelog:
  - Resolves: 1557470 - netstat -i cut's interface names
  - Resolves: 1566084 - netstat -agn only shows 10 character interface name for IPv4 addressing


author: Michal Ruprich <michalruprich@gmail.com> - 2.0-0.52.20160912git
changelog:
  - Resolves: #1711119 - netstat says "packetes" instead of "packets"
  - Resolves: #1670355 - Exit code on wrong parameter is zero for many net-tools binaries
  - Resolves: #1807989 - The output of `route -A inet6` does not display properly when the 'Use' column output is over 6 digits


author: Tomáš Mráz <tmraz@redhat.com> - 3.4-4
changelog:
  - Cover the gaps in annotation coverage for assembler sources
  - Add .hmac checksums for FIPS mode integrity checking


author: Daiki Ueno <dueno@redhat.com> - 3.4.1-5
changelog:
  - Backport powerpc64 optimization patches from upstream (#1855228)
    Patch from Christopher M. Riedl.


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.52.20-4
changelog:
  - Python 2 binary package renamed to python2-newt
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Miroslav Lichvar <mlichvar@redhat.com> - 0.52.20-8
changelog:
  - rename newt-python3 subpackage to python3-newt
  - build python3 subpackage unconditionally
  - don't use unversioned python_sitearch macro
  - drop static subpackage
  - use macro for ldconfig scriptlets
  - add gcc to build requirements
  - fix description of python2-newt


author: Miroslav Lichvar <mlichvar@redhat.com> - 0.52.20-10
changelog:
  - move snack provides to python3-newt subpackage (#1640153)
  - fix radio button selection check in snack (#1714517)


author: Steve Dickson <steved@redhat.com> 0.3.5-2
changelog:
  - nfs4_getfacl: Add new option -c/--omit-header (bz 1698281)
  - nfs4_setfacl: Skip comment field while reading ACE(s) (bz 1687299)


author: Phil Sutter <psutter@redhat.com> [0.9.3-14.el8]
changelog:
  - JSON: Improve performance of json_events_cb() (Phil Sutter) [1835300]
  - doc: Document notrack statement (Phil Sutter) [1841292]


author: Phil Sutter <psutter@redhat.com> [0.9.3-15.el8]
changelog:
  - segtree: Fix get element command with prefixes (Phil Sutter) [1832235]
  - tests: 0034get_element_0: do not discard stderr (Phil Sutter) [1832235]
  - segtree: Merge get_set_interval_find() and get_set_interval_end() (Phil Sutter) [1832235]
  - segtree: Use expr_clone in get_set_interval_*() (Phil Sutter) [1832235]
  - segtree: Fix missing expires value in prefixes (Phil Sutter) [1832235]


author: Phil Sutter <psutter@redhat.com> [0.9.3-16.el8]
changelog:
  - src: Set NFT_SET_CONCAT flag for sets with concatenated ranges (Phil Sutter) [1820684]
  - include: Resync nf_tables.h cache copy (Phil Sutter) [1820684]


author: Phil Sutter <psutter@redhat.com> [0.9.3-17.el8]
changelog:
  - json: don't leave dangling pointers on hlist (Phil Sutter) [1900565]
  - json: Fix seqnum_to_json() functionality (Phil Sutter) [1900565]
  - json: echo: Speedup seqnum_to_json() (Phil Sutter) [1900565]
  - proto: Fix ARP header field ordering (Phil Sutter) [1896334]
  - proto: add sctp crc32 checksum fixup (Phil Sutter) [1895804]
  - mergesort: unbreak listing with binops (Phil Sutter) [1891790]
  - evaluate: missing datatype definition in implicit_set_declaration() (Phil Sutter) [1877022]
  - evaluate: Perform set evaluation on implicitly declared (anonymous) sets (Phil Sutter) [1877022]
  - src: store expr, not dtype to track data in sets (Phil Sutter) [1877022]


author: Phil Sutter <psutter@redhat.com> [0.9.3-19.el8]
changelog:
  - evaluate: Reject quoted strings containing only wildcard (Phil Sutter) [1818117]
  - tests: monitor: use correct $nft value in EXIT trap (Phil Sutter) [1919203]
  - monitor: Fix for use after free when printing map elements (Phil Sutter) [1919203]
  - tests: Disable tests known to fail on RHEL8 (Phil Sutter) [1919203]


author: Phil Sutter <psutter@redhat.com> [0.9.3-20.el8]
changelog:
  - src: Optimize prefix matches on byte-boundaries (Phil Sutter) [1934926]
  - src: Support odd-sized payload matches (Phil Sutter) [1934926]
  - spec: Add an rpminspect.yaml file to steer rpminspect (Phil Sutter) [1962184]
  - spec: Explicitly state dist string in Release tag (Phil Sutter) [1962184]


author: Phil Sutter <psutter@redhat.com> [0.9.3-21.el8]
changelog:
  - tests: shell: Fix bogus testsuite failure with 100Hz (Phil Sutter) [1919203]
  - doc: nft.8: Extend monitor description by trace (Phil Sutter) [1820365]
  - include: missing sctp_chunk.h in Makefile.am (Phil Sutter) [1979334]
  - exthdr: Implement SCTP Chunk matching (Phil Sutter) [1979334]
  - scanner: sctp: Move to own scope (Phil Sutter) [1979334]
  - scanner: introduce start condition stack (Phil Sutter) [1979334]
  - json: Simplify non-tcpopt exthdr printing a bit (Phil Sutter) [1979334]
  - json: tcp: add raw tcp option match support (Phil Sutter) [1979334]
  - tcp: add raw tcp option match support (Phil Sutter) [1979334]
  - tcpopt: allow to check for presence of any tcp option (Phil Sutter) [1979334]
  - tcpopt: split tcpopt_hdr_fields into per-option enum (Phil Sutter) [1979334]
  - tcpopt: rename noop to nop (Phil Sutter) [1979334]
  - tcpopts: clean up parser -> tcpopt.c plumbing (Phil Sutter) [1979334]
  - parser: merge sack-perm/sack-permitted and maxseg/mss (Phil Sutter) [1979334]
  - tests/py: Move tcpopt.t to any/ directory (Phil Sutter) [1979334]


author: Dridi Boukelmoune <dridi@fedoraproject.org>- 2.1-1
changelog:
  - Update to 2.1
  - Upstream moved to github
  - Upstream switched to autotools
  - Disable --as-needed until it's patched upstream
  - Drop defunct 32bit x86 support
  - Add ppc64le support
  - Run the new test suite


author: luto@kernel.org - 1.9-1
changelog:
  - Update to 1.9
  - Certain fabric functionality may not work yet due to missing dracut
    support and missing hostid and hostnqn configuration.


author: Michal Schmidt <mschmidt@redhat.com> - 2.2.8-4
changelog:
  - Return support for crypto hw on s390.
  - Renamed to opencryptoki.
  - Simplified multilib by putting libs in subpackage as suggested by Dan Horák.


author: Dan Horák <dan[at]danny.cz> - 2.4.1-1
changelog:
  - new upstream release 2.4.1
  - convert from initscript to systemd unit
  - import fixes from RHEL-6 about root's group membership (#732756, #730903)


author: Dan Horák <dan[at]danny.cz> - 2.4.2-3
changelog:
  - add virtual opencryptoki(token) Provides to token modules and as Requires
    to main package (#904986)


author: Dan Horák <dan[at]danny.cz> - 3.0-8
changelog:
  - include token specific directories (#1013017, #1045775, #1054442)
  - fix pkcsconf crash for non-root users (#10054661)
  - the libs subpackage must care of creating the pkcs11 group, it's the first to be installed


author: Jakub Jelen <jjelen@redhat.com> 3.2-2
changelog:
  - Fix missing sources and libraries in makefiles causing undefined symbols (#1193560)
  - Make inline function compatible for GCC5


author: Jakub Jelen <jjelen@redhat.com> 3.2-3
changelog:
  - Few more undefined symbols fixed for s390(x) specific targets
  - Do not require --no-undefined, because s390(x) requires some


author: Than Ngo <than@redhat.com> - 3.10.0-3
changelog:
  - Resolves: #1657683, can't establish libica token in FIPS mode
  - Resolves: #1652856, EP11 token fails when using Strict-Session mode or VHSM-Mode


author: Than Ngo <than@redhat.com> - 3.11.0-3
changelog:
  - Resolves: #1667941, 3des tests failures due to FIPS incompatible test scenarios
  - Resolves: #1651731, ep11 token: enhanced IBM z14 functions
  - Resolves: #1651732, ep11 token: support m_*Single functions from ep11 lib
  - Resolves: #1525407, use CPACF hashes in ep11 token
  - Resolves: #1651238, rebase to 3.11.0
  - Resolves: #1682530, gating


author: Than Ngo <than@redhat.com> - 3.14.0-1
changelog:
  - Resolves: #1723863 - ep11 token: Enhanced Support
  - Resolves: #1780285 - ep11 token: Support for new IBM Z hardware z15
  - Resolves: #1780293 - rebase to 3.14.0
  - Resolves: #1800549 - key management tool: list keys function
   -Resolves: #1800555 - key management tool: random key generation function


author: Than Ngo <than@redhat.com> - 3.15.0-1
changelog:
  - Resolves: #1847433, rebase to 3.15.0 
  - Resolves: #1851105, PKCS #11 3.0 - baseline provider support
  - Resolves: #1851108, openCryptoki ep11 token: enhanced functionality
  - Resolves: #1851109, openCryptoki key management tool: key deletion function


author: Than Ngo <than@redhat.com> - 3.15.1-1
changelog:
  - Related: #1847433
    upstream fixes:
      - Free generated key in all error cases
      - CCA: Zeroize key buffer to avoid CCA 8/32 error
      - Do not delete the map-btree entry if destroying an object is not allowed
      - Remove now unused header timeb.h
      - TESTCASES: Use FIPS conforming keys for 3DES CBC-MAC test vectors
      - Fix buffer overrun in C_CopyObject
      - TPM: Fix double free in openssl_gen_key


author: Than Ngo <than@redhat.com> - 3.15.1-3
changelog:
  - Resolves: #1902022
     Fix compiling with c++
     Added error message handling for p11sak remove-key command


author: Than Ngo <than@redhat.com> - 3.16.0-1
changelog:
  - Resolves: #1919223, rebase to 3.16.0
  - Resolves: #1922195, Event Notification Support
  - Resolves: #1959936, Soft token does not check if an EC key is valid
  - Resolves: #1851104, import and export of secure key objects
  - Resolves: #1851106, openCryptoki ep11 token: protected key support
  - Resolves: #1851107, openCryptoki ep11 token: support attribute bound keys


author: Than Ngo <than@redhat.com> - 3.16.0-5
changelog:
  - Resolves: #1987256, pkcstok_migrate leaves options with multiple strings in opencryptoki.conf options without double-quotes


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-2
changelog:
  - Avoid mismatching coolkey cards for muscle ones (#1588722)
  - Implement legacy CAC1 driver (#1638052)
  - Disable pinpad
  - Fixup verification after RSA-PSS implementation


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-3
changelog:
  - Unbreak the RSA-PSS mechanisms (#1595626)
  - Unbreak the signing using hashed mechanisms in CardOS and others (#1644338)


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-4
changelog:
  - Unbreak the Dual CAC cards in PIV driver (#1651748)
  - Fix few more corner cases for handling different types of padding (#1595626)
  - Unbreak signature verification in pkcs11-tool (#1651748)


author: Jakub Jelen <jjelen@redhat.com> - 0.19.0-6
changelog:
  - Add support for Gemalto IDPrime smart cards (#1657970)
  - Fix 2k RSA key operations with Coolkey (#1766712)


author: Jakub Jelen <jjelen@redhat.com> - 0.20.0-3
changelog:
  - Support PIN change for HID Alt tokens (#1830901)
  - Fix CVE-2020-26570, CVE-2020-26571 and CVE-2020-26572
  - Fix right padding of token labels of some cards (#1877973)


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-2 + 0.10.3-7
changelog:
  - Allow specifying a pin-value in PKCS #11 URI in ssh-add (#1639698)
  - Whitelist another syscall variant for s390x cryptographic module (ibmca engine) (#1714915)


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-3 + 0.10.3-7
changelog:
  - Fix typos in manual pages (#1668325)
  - Use the upstream support for PKCS#8 PEM files alongside with the legacy PEM files (#1712436)
  - Unbreak ssh-keygen -A in FIPS mode (#1732424)
  - Add missing RSA certificate types to offered hostkey types in FIPS mode (#1732449)


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-5 + 0.10.3-7
changelog:
  - Do not print "no slots" warning by default (#1744220)
  - Unbreak connecting using gssapi through proxy commands (#1749862)
  - Document in manual pages that CASignatureAlgorithms are handled by crypto policies (#1790604)
  - Use SHA2-based signature algorithms by default for signing certificates (#1790610)
  - Prevent simple ProxyJump loops in configuration files (#1804099)
  - Teach ssh-keyscan to use SHA2 RSA variants (#1744108)
  - Do not fail hard if getrandom() is not available and no SSH_USE_STRONG_RNG is specified (#1812120)
  - Improve wording of crypto policies references in manual pages (#1812854)
  - Do not break X11 forwarding if IPv6 is disabled (#1662189)
  - Enable SHA2-based GSSAPI key exchange algorithms by default (#1816226)
  - Mark RDomain server configuration option unsupported in RHEL (#1807686)
  - Clarify crypto policies defaults in manual pages (#1724195)
  - Mention RSA SHA2 variants in ssh-keygen manual page (#1665900)


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 8.0p1-7 + 0.10.3-7
changelog:
  - SFTP sort upon the modification time (#1909988)
  - ssh-keygen printing fingerprint issue with Windows keys (#1901518)
  - PIN is lost when iterating over tokens when adding pkcs11 keys to ssh-agent (#1843372)
  - ssh-agent segfaults during ssh-add -s pkcs11 (#1868996)
  - ssh-copy-id could not resolve ipv6 address ends with colon (#1933517)
  - sshd provides PAM an incorrect error code (#1879503)


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 8.0p1-9
changelog:
  - CVE-2020-14145 openssh: Observable Discrepancy leading to an information
    leak in the algorithm negotiation (#1882252)
  - Hostbased ssh authentication fails if session ID contains a '/' (#1944125)


author: Weitao Zhou <zhouwt@linux.alibaba.com> - 8.0p1-10.0.1
changelog:
  - seccomp: Allow check_nanosleep to better compatibility for both glibc2.28 and glibc2.32
  - Support loongarch64 seccomp_filter sandbox (xuezhixin@uniontech.com)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Patch to build with neither RSA nor RSAref.
  - Miscellaneous FHS-compliance tweaks.
  - Fix for possibly-compressed man pages.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Move condrestart to server postun.
  - Move key generation to init script.
  - Actually use the right patch for moving the key generation to the init script.
  - Clean up the init script a bit.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to 2.1.1p4, which includes fixes for config file parsing problems.
  - Move the init script back.
  - Add Damien's quick fix for wackiness.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to 20000823 snapshot.
  - Change subpackage requirements from %{version} to %{version}-%{release}
  - Back out the pipe patch.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update x11-askpass to 1.0.2. (#17835)
  - Add BuildPreReqs for /bin/login and /usr/bin/rsh so that configure will
    always find them in the right place. (#17909)
  - Set the default path to be the same as the one supplied by /bin/login, but
    add /usr/X11R6/bin. (#17909)
  - Try to handle obsoletion of ssh-server more cleanly.  Package names
    are different, but init script name isn't. (#17865)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add BuildPreReq on /usr/include/security/pam_appl.h to be sure we always
    build PAM authentication in.
  - Try setting SSH_ASKPASS if gnome-ssh-askpass is installed.
  - Clean out no-longer-used patches.
  - Patch ssh-add to try to add both identity and id_dsa, and to error only
    when neither exists.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to OpenSSH 2.3.0p1.
  - Update to x11-askpass 1.1.0.
  - Enable keyboard-interactive authentication.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Resync with conditional options in Damien Miller's .spec file for an errata.
  - Change libexecdir from %{_libexecdir}/ssh to %{_libexecdir}/openssh.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add the primes file from the latest snapshot to the main package (#20884).
  - Add the dev package to the prereq list (#19984).
  - Remove the default path and mimic login's behavior in the server itself.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Disable the built-in MD5 password support.  We're using PAM.
  - Take a crack at doing keyboard-interactive authentication with PAM, and
    enable use of it in the default client configuration so that the client
    will try it when the server disallows password authentication.
  - Build with debugging flags.  Build root policies strip all binaries anyway.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Merge multiple PAM text messages into subsequent prompts when possible when
    doing keyboard-interactive authentication.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to x11-askpass 1.1.1. (#21301)
  - Don't second-guess fixpaths, which causes paths to get fixed twice. (#21290)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Don't treat pam_setcred() failure as fatal unless pam_authenticate() has
    succeeded, to allow public-key authentication after a failure with "none"
    authentication.  (#21268)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - More gettextizing.
  - Close all files after going into daemon mode (needs more testing).
  - Extract patch from CVS to handle auth banners (in the client).
  - Extract patch from CVS to handle compat weirdness.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Don't open a PAM session until we've forked and become the user (#25690).
  - Apply Andrew Bartlett's patch for letting pam_authenticate() know which
    host the user is attempting a login from.
  - Resync with parts of Damien Miller's openssh.spec from CVS.
  - Don't expose KbdInt responses in debug messages (from CVS).
  - Detect and handle errors in rsa_{public,private}_decrypt (from CVS).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update for 2.5.0p1.
  - Use $RPM_OPT_FLAGS instead of -O when building gnome-ssh-askpass
  - Resync with parts of Damien Miller's openssh.spec from CVS, including
    update of x11 askpass to 1.2.0.
  - Only require openssl (don't prereq) because we generate keys in the init
    script now.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update for 2.5.1p1.
  - Add init script mods from Pekka Savola.
  - Tweak the init script to match the CVS contrib script more closely.
  - Redo patch to ssh-add to try to adding both identity and id_dsa to also try
    adding id_rsa.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Redo patch to move pam_open_session after the server setuid()s to the user.
  - Rework the nopam patch to use be picked up by autoconf.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Chuck the closing patch.
  - Add a trigger to add host keys for protocol 2 to the config file, now that
    configuration file syntax requires us to specify it with HostKey if we
    specify any other HostKey values, which we do.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Revert the patch to move pam_open_session.
  - Init script and spec file changes from Pekka Savola. (#28750)
  - Patch sftp to recognize '-o protocol' arguments. (#29540)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.5.2p1 (includes endianness fixes in the rijndael implementation)
  - don't enable challenge-response by default until we find a way to not
    have too many userauth requests (we may make up to six pubkey and up to
    three password attempts as it is)
  - remove build dependency on rsh to match openssh.com's packages more closely


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.5.2p2
  - call setcred() again after initgroups, because the "creds" could actually
    be group memberships


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make do_pam_setcred() smart enough to know when to establish creds and
    when to reinitialize them
  - add in a couple of other fixes from Damien for inclusion in the errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - mention that challengereponse supports PAM, so disabling password doesn't
    limit users to pubkey and rsa auth (#34378)
  - bypass the daemon() function in the init script and call initlog directly,
    because daemon() won't start a daemon it detects is already running (like
    open connections)
  - require the version of openssl we had when we were built


author: Preston Brown <pbrown@redhat.com>
changelog:
  - remove explicit openssl requirement, fixes builddistro issue
  - make initscript stop() function wait until sshd really dead to avoid 
    races in condrestart


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - finish marking strings in the init script for translation
  - modify init script to source /etc/sysconfig/sshd and pass $OPTIONS to sshd
    at startup (change merged from openssh.com init script, originally by
    Pekka Savola)
  - refuse to do X11 forwarding if xauth isn't there, handy if you enable
    it by default on a system that doesn't have X installed


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add in Simon Wilkinson's GSSAPI patch to give it some testing in-house,
    to be removed before the next beta cycle because it's a big departure
    from the upstream version


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix an error parsing the new default sshd_config
  - add a fix from Markus Friedl (via openssh-unix-dev) for ssh-keygen not
    dealing with comments right


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change Copyright: BSD to License: BSD
  - add Markus Friedl's unverified patch for the cookie file deletion problem
    so that we can verify it
  - drop patch to check if xauth is present (was folded into cookie patch)
  - don't apply gssapi patches for the errata candidate
  - clear supplemental groups list at startup


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pull cvs patch to add session initialization to no-pty sessions
  - pull cvs patch to not cut off challengeresponse auth needlessly
  - refuse to do X11 forwarding if xauth isn't there, handy if you enable
    it by default on a system that doesn't have X installed (#49263)


author: Nalin Dahyabhai <nalin@redhat.com> 2.9p2-7
changelog:
  - fix scp's server's reporting of file sizes, and build with the proper
    preprocessor define to get large-file capable open(), stat(), etc.
    (sftp has been doing this correctly all along) (#51827)
  - configure without --with-ipv4-default on RHL 7.x and newer (#45987,#52247)
  - pull cvs patch to fix support for /etc/nologin for non-PAM logins (#47298)
  - mark profile.d scriptlets as config files (#42337)
  - refer to Jason Stone's mail for zsh workaround for exit-hanging quasi-bug
  - change a couple of log() statements to debug() statements (#50751)
  - pull cvs patch to add -t flag to sshd (#28611)
  - clear fd_sets correctly (one bit per FD, not one byte per FD) (#43221)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 3.0p1
  - update to x11-ssh-askpass 1.2.4.1
  - change build dependency on a file from pam-devel to the pam-devel package
  - replace primes with moduli


author: Nalin Dahyabhai <nalin@redhat.com> 3.0p1-1
changelog:
  - merge some of Damien Miller <djm@mindrot.org> changes from the upstream
    3.0p1 spec file and init script


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.2p1-3
changelog:
  - add patches from Simon Wilkinson and Nicolas Williams for GSSAPI key
    exchange, authentication, and named key support


author: Nalin Dahyabhai <nalin@redhat.com> SNAP-20020220
changelog:
  - update to SNAP-20020220 for testing purposes (you've been warned, if there's
    anything to be warned about, gss patches won't apply, I don't mind)


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-1
changelog:
  - require sharutils for building (mindrot #137)
  - require db1-devel only when building for 6.x (#55105), which probably won't
    work anyway (3.1 requires OpenSSL 0.9.6 to build), but what the heck
  - require pam-devel by file (not by package name) again
  - add Markus's patch to compile with OpenSSL 0.9.5a (from
    http://bugzilla.mindrot.org/show_bug.cgi?id=141) and apply it if we're
    building for 6.x


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-2gss
changelog:
  - reintroduce Simon's gssapi patches
  - add buildprereq for autoconf253, which is needed to regenerate configure
    after applying the gssapi patches
  - refresh to the latest version of Markus's patch to build properly with
    older versions of OpenSSL


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-3
changelog:
  - pull patch from CVS to avoid printing error messages when some of the
    default keys aren't available when running ssh-add
  - refresh to current revisions of Simon's patches


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-4
changelog:
  - drop buildreq on db1-devel
  - require pam-devel by package name
  - require autoconf instead of autoconf253 again


author: Nalin Dahyabhai <nalin@redhat.com> 3.3p1-1
changelog:
  - update to 3.3p1
  - merge in spec file changes from upstream (remove setuid from ssh, ssh-keysign)
  - disable gtk2 askpass
  - require pam-devel by filename rather than by package for erratum
  - include patch from Solar Designer to work around anonymous mmap failures


author: Nalin Dahyabhai <nalin@redhat.com> 3.3p1-2
changelog:
  - rework the close-on-exit docs
  - include configuration file man pages
  - make use of nologin as the privsep shell optional


author: Nalin Dahyabhai <nalin@redhat.com> 3.5p1-2
changelog:
  - patch PAM configuration to use relative path names for the modules, allowing
    us to not worry about which arch the modules are built for on multilib systems


author: Nalin Dahyabhai <nalin@redhat.com> 3.5p1-6
changelog:
  - move scp to the -clients subpackage, because it directly depends on ssh
    which is also in -clients (#84329)


author: Nalin Dahyabhai <nalin@redhat.com> 3.6.1p2-6
changelog:
  - modify patch which clears the supplemental group list at startup to only
    complain if setgroups() fails if sshd has euid == 0
  - handle krb5 installed in %{_prefix} or elsewhere by using krb5-config


author: Nalin Dahyabhai <nalin@redhat.com> 3.6.1p2-11
changelog:
  - apply patch to store the correct buffer size in allocated buffers
    (CAN-2003-0693)
  - skip the initial PAM authentication attempt with an empty password if
    empty passwords are not permitted in our configuration (#103998)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - additional fix for apparently-never-happens double-free in buffer_free()
  - extend fix for #103998 to cover SSH1


author: Daniel Walsh <dwalsh@redhat.com> 3.6.1p2-34
changelog:
  * Wed Mar 03 2004 Phil Knirsch <pknirsch@redhat.com> 3.6.1p2-33.30.1
  - Built RHLE3 U2 update package.


author: Nalin Dahyabhai <nalin@redhat.com> 3.8.1p1-1
changelog:
  - request gssapi-with-mic by default but not delegation (flag day for anyone
    who used previous gssapi patches)
  - no longer request x11 forwarding by default


author: Nalin Dahyabhai <nalin@redhat.com> 3.9p1-8
changelog:
  - add a --enable-vendor-patchlevel option which allows a ShowPatchLevel option
    to enable display of a vendor patch level during version exchange (#120285)
  - configure with --disable-strip to build useful debuginfo subpackages


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - change permissions on pam.d/sshd to 0644 (#64697)
  - patch initscript so it doesn't kill opened sessions if
    the sshd daemon isn't running anymore (#67624)


author: Tomas Mraz <tmraz@redhat.com> 3.9p1-10
changelog:
  - enable trusted forwarding by default if X11 forwarding is 
    required by user (#137685 and duplicates)
  - disable protocol 1 support by default in sshd server config (#88329)
  - keep the gnome-askpass dialog above others (#69131)


author: Tomas Mraz <tmraz@redhat.com> 3.9p1-11
changelog:
  - don't call syslog in signal handler
  - allow password authentication when copying from remote
    to remote machine (#103364)


author: Tomas Mraz <tmraz@redhat.com> 4.0p1-2
changelog:
  - fixed Local/RemoteForward in ssh_config.5 manpage
  - fix fatal when Local/RemoteForward is used and scp run (#153258)
  - don't leak user validity when using krb5 authentication


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-3
changelog:
  - fix small regression caused by the nologin patch (#161956)
  - fix race in getpeername error checking (mindrot #1054)


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-4
changelog:
  - don't deadlock on exit with multiple X forwarded channels (#152432)
  - don't use X11 port which can't be bound on all IP families (#163732)


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-5
changelog:
  - use x11-ssh-askpass if openssh-askpass-gnome is not installed (#165207)
  - install ssh-copy-id from contrib (#88707)


author: Tomas Mraz <tmraz@redhat.com> 4.2p1-2
changelog:
  - use include instead of pam_stack in pam config
  - use fork+exec instead of system in scp - CVE-2006-0225 (#168167)
  - upstream patch for displaying authentication errors


author: Warren Togami <wtogami@redhat.com> - 4.2p1-7
changelog:
  - xorg-x11-devel -> libXt-devel
  - rebuild for new xauth location so X forwarding works
  - buildreq audit-libs-devel
  - buildreq automake for aclocal
  - buildreq imake for xmkmf
  -  -D_GNU_SOURCE in flags in order to get it to build
     Ugly hack to workaround openssh defining __USE_GNU which is
     not allowed and causes problems according to Ulrich Drepper
     fix this the correct way after FC5test1


author: Nalin Dahyabhai <nalin@redhat.com> - 4.2p1-8
changelog:
  - work around missing gccmakedep by wrapping makedepend in a local script
  - remove now-obsolete build dependency on "xauth"


author: Tomas Mraz <tmraz@redhat.com> - 4.2p1-9
changelog:
  - drop x11-ssh-askpass from the package
  - drop old build_6x ifs from spec file
  - improve gnome-ssh-askpass so it doesn't reveal number of passphrase 
    characters to person looking at the display
  - less hackish fix for the __USE_GNU problem


author: Tomas Mraz <tmraz@redhat.com> - 4.3p1-2
changelog:
  - fixed another place where syslog was called in signal handler
  - pass locale environment variables to server, accept them there (#179851)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-3
changelog:
  - enable the subprocess in chroot to send messages to system log
  - sshd should prevent login if audit call fails


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-6
changelog:
  - improve selinux patch (by Jan Kiszka)
  - upstream patch for buffer append space error (#191940)
  - fixed typo in configure.ac (#198986)
  - added pam_keyinit to pam configuration (#198628)
  - improved error message when askpass dialog cannot grab
    keyboard input (#198332)
  - buildrequires xauth instead of xorg-x11-xauth
  - fixed a few rpmlint warnings


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-7
changelog:
  - dropped old ssh obsoletes
  - call the pam_session_open/close from the monitor when privsep is
    enabled so it is always called as root (patch by Darren Tucker)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-8
changelog:
  - drop the pam-session patch from the previous build (#201341)
  - don't set IPV6_V6ONLY sock opt when listening on wildcard addr (#201594)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-9
changelog:
  - don't report duplicate syslog messages, use correct local time (#189158)
  - don't allow spnego as gssapi mechanism (from upstream)
  - fixed memleaks found by Coverity (from upstream)
  - allow ip options except source routing (#202856) (patch by HP)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-10
changelog:
  - improve gssapi-no-spnego patch (#208102)
  - CVE-2006-4924 - prevent DoS on deattack detector (#207957)
  - CVE-2006-5051 - don't call cleanups from signal handler (#208459)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-11
changelog:
  - merge sshd initscript patches
  - kill all ssh sessions when stop is called in halt or reboot runlevel
  - remove -TERM option from killproc so we don't race on sshd restart


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-13
changelog:
  - improved pam_session patch so it doesn't regress, the patch is necessary
    for the pam_session_close to be called correctly as uid 0


author: Tomas Mraz <tmraz@redhat.com> - 4.5p1-2
changelog:
  - support mls on labeled networks (#220487)
  - support mls level selection on unlabeled networks
  - allow / in usernames in scp (only beginning /, ./, and ../ is special)


author: Tomas Mraz <tmraz@redhat.com> - 4.5p1-8
changelog:
  - fix sftp client problems on write error (#247802)
  - allow disabling autocreation of server keys (#235466)


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-1
changelog:
  - upgrade to latest upstream
  - use libedit in sftp (#203009)
  - fixed audit log injection problem (CVE-2007-3102)


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-4
changelog:
  - do not copy /etc/localtime into the chroot as it is not
    necessary anymore (#193184)
  - call setkeycreatecon when selinux context is established
  - test for NULL privk when freeing key (#391871) - patch by
    Pierre Ossman


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-9
changelog:
  - set FD_CLOEXEC on client socket
  - apply real fix for window size problem (#286181) from upstream
  - apply fix for the spurious failed bind from upstream
  - apply open handle leak in sftp fix from upstream


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-10
changelog:
  - fix race on control master and cleanup stale control socket (#436311)
    patches by David Woodhouse


author: Tomas Mraz <tmraz@redhat.com> - 5.0p1-1
changelog:
  - upgrade to new upstream (#441066)
  - prevent initscript from killing itself on halt with upstart (#438449)
  - initscript status should show that the daemon is running
    only when the main daemon is still alive (#430882)


author: Tomas Mraz <tmraz@redhat.com> - 5.0p1-2
changelog:
  - add LANGUAGE to accepted/sent environment variables (#443231)
  - use pam_selinux to obtain the user context instead of doing it itself
  - unbreak server keep alive settings (patch from upstream)
  - small addition to scp manpage


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-1
changelog:
  - upgrade to new upstream release
  - fixed a problem with public key authentication and explicitely
    specified SELinux role


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-4
changelog:
  - set FD_CLOEXEC on channel sockets (#475866)
  - adjust summary
  - adjust nss-keys patch so it is applicable without selinux patches (#470859)


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-5
changelog:
  - remove obsolete --with-rsh (#478298)
  - add pam_sepermit to allow blocking confined users in permissive mode
    (#471746)
  - move system-auth after pam_selinux in the session stack


author: Jan F. Chadima <jchadima@redhat.com> - 5.2p1-20
changelog:
  - merged xmodifiers to redhat patch
  - merged gssapi-role to selinux patch
  - merged cve-2007_3102 to audit patch
  - sesftp patch only with WITH_SELINUX flag
  - rearange sesftp patch according to upstream request


author: Jan F. Chadima <jchadima@redhat.com> - 5.2p1-28
changelog:
  - Repair initscript to be acord to guidelines (#521860)
  - Add bugzilla# to application of edns and xmodifiers patch


author: Jan F. Chadima <jchadima@redhat.com> - 5.5p1-10 + 0.9.2-26
changelog:
  - Repair the reference in man ssh-ldap-helper(8)
  - Repair the PubkeyAgent section in sshd_config(5)
  - Provide example ldap.conf


author: Jan F. Chadima <jchadima@redhat.com> - 5.6p1-20 + 0.9.2-29
changelog:
  - reapair clientloop crash (#627332)
  - properly restore euid in case connect to the ssh-agent socket fails


author: Jan F. Chadima <jchadima@redhat.com> - 5.8p1-18 + 0.9.2-30
changelog:
  - add periodical reseeding of random generator 
  - change selinux contex for internal sftp in do_usercontext
  - exit(0) after sigterm


author: Jan F. Chadima <jchadima@redhat.com> - 5.8p1-20 + 0.9.2-30
changelog:
  - use /dev/random or /dev/urandom for seeding prng
  - improve periodical reseeding of random generator


author: Jan F. Chadima <jchadima@redhat.com> - 5.8p2-12 + 0.9.2-31
changelog:
  - Systemd compatibility according to Mathieu Bridon <bochecha@fedoraproject.org>
  - Split out the host keygen into their own command, to ease future migration
    to systemd. Compatitbility with the init script was kept.
  - Migrate the package to full native systemd unit files, according to the Fedora
    packaging guidelines.
  - Prepate the unit files for running an ondemand server. (do not add it actually)


author: Tomas Mraz <tmraz@redhat.com> - 5.9p1-11 + 0.9.2-32
changelog:
  - remove unnecessary requires on initscripts
  - set VerifyHostKeyDNS to ask in the default configuration (#739856)


author: Tomas Mraz <tmraz@redhat.com> - 5.9p1-12 + 0.9.2-32
changelog:
  - still support /etc/sysconfig/sshd loading in sshd service (#754732)
  - fix incorrect key permissions generated by sshd-keygen script (#754779)


author: Tomas Mraz <tmraz@redhat.com> - 5.9p1-13 + 0.9.2-32
changelog:
  - add back the restorecon call to ssh-copy-id - it might be needed on older
    distributions (#739989)


author: Petr Lautrbach <plautrba@redhat.com> 5.9p1-18 + 0.9.2-32
changelog:
  - replace TwoFactorAuth with RequiredAuthentications[12]
    https://bugzilla.mindrot.org/show_bug.cgi?id=983


author: Tomas Mraz <tmraz@redhat.com> 5.9p1-23 + 0.9.3-1
changelog:
  - fix segfault in su when pam_ssh_agent_auth is used and the ssh-agent
    is not running, most probably not exploitable
  - update pam_ssh_agent_auth to 0.9.3 upstream version


author: Petr Lautrbach <plautrba@redhat.com> 6.1p1-1 + 0.9.3-3
changelog:
  - new upstream release (#852651)
  - use DIR: kerberos type cache (#848228)
  - don't use chroot_user_t for chrooted users (#830237)
  - replace scriptlets with systemd macros (#850249)
  - don't use /bin and /sbin paths (#856590)


author: Petr Lautrbach <plautrba@redhat.com> 6.1p1-2
changelog:
  - add SELinux comment to /etc/ssh/sshd_config about SELinux command to modify port (#861400)
  - drop required chkconfig (#865498)
  - drop openssh-5.9p1-sftp-chroot.patch (#830237)


author: Petr Lautrbach <plautrba@redhat.com> 6.1p1-3 + 0.9.3-3
changelog:
  - replace RequiredAuthentications2 with AuthenticationMethods based on upstream
  - obsolete RequiredAuthentications[12] options
  - fix openssh-6.1p1-privsep-selinux.patch


author: Petr Lautrbach <plautrba@redhat.com> 6.2p1-2 + 0.9.3-4
changelog:
  - keep track of which IndentityFile options were manually supplied and
    which were default options, and don't warn if the latter are missing.
    (mindrot#2084)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p1-3 + 0.9.3-4
changelog:
  - sshd.service: use KillMode=process (#890376)
  - add latest config.{sub,guess} to support aarch64 (#926284)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-4 + 0.9.3-5
changelog:
  - don't show Success for EAI_SYSTEM (#985964)
  - make sftp's libedit interface marginally multibyte aware (#841771)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-7 + 0.9.3-5
changelog:
  - use hmac_suffix for ssh{,d} hmac checksums
  - bump the minimum value of SSH_USE_STRONG_RNG to 14 according to SP800-131A
  - automatically restart sshd.service on-failure after 42s interval


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-8 + 0.9.3-5
changelog:
  - sshd-keygen: generate only RSA keys by default (#1010092)
  - use dist tag in suffixes for hmac checksum files


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-9 + 0.9.3-5
changelog:
  - use dracut-fips package to determine if a FIPS module is installed
  - revert -fips subpackages and hmac files suffixes


author: Petr Lautrbach <plautrba@redhat.com> 6.3p1-2 + 0.9.3-6
changelog:
  - use default_ccache_name from /etc/krb5.conf for a kerberos cache (#991186)
  - increase the size of the Diffie-Hellman groups (#1010607)
  - sshd-keygen to generate ECDSA keys <i.grok@comcast.net> (#1019222)


author: Petr Lautrbach <plautrba@redhat.com> 6.3p1-5 + 0.9.3-7
changelog:
  - adjust gss kex mechanism to the upstream changes (#1024004)
  - don't use xfree in pam_ssh_agent_auth sources <geertj@gmail.com> (#1024965)


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-2 + 0.9.3-1
changelog:
  - fix fatal() cleanup in the audit patch (#1029074)
  - fix parsing logic of ldap.conf file (#1033662)


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-3 + 0.9.3-1
changelog:
  - sshd-keygen - use correct permissions on ecdsa host key (#1023945)
  - use only rsa and ecdsa host keys by default


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-4 + 0.9.3-1
changelog:
  - use SSH_COPY_ID_LEGACY variable to run ssh-copy-id in the legacy mode
  - make /etc/ssh/moduli file public (#1043661)
  - test existence of /etc/ssh/ssh_host_ecdsa_key in sshd-keygen.service
  - don't clean up gssapi credentials by default (#1055016)
  - ssh-agent - try CLOCK_BOOTTIME with fallback (#1091992)
  - prevent a server from skipping SSHFP lookup - CVE-2014-2653 (#1081338)
  - ignore environment variables with embedded '=' or '\0' characters - CVE-2014-2532
    (#1077843)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-1 + 0.9.3-2
changelog:
  - disable the curve25519 KEX when speaking to OpenSSH 6.5 or 6.6
  - add support for ED25519 keys to sshd-keygen and sshd.sysconfig
  - drop openssh-server-sysvinit subpackage
  - slightly change systemd units logic - use sshd-keygen.service (#1066615)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-5 + 0.9.3-3
changelog:
  - set a client's address right after a connection is set (mindrot#2257)
  - apply RFC3454 stringprep to banners when possible (mindrot#2058)
  - don't consider a partial success as a failure (mindrot#2270)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-6 + 0.9.3-3
changelog:
  - privsep_preauth: use SELinux context from selinux-policy (#1008580)
  - change audit trail for unknown users (mindrot#2245)
  - fix kuserok patch which checked for the existence of .k5login
    unconditionally and hence prevented other mechanisms to be used properly
  - revert the default of KerberosUseKuserok back to yes (#1153076)
  - ignore SIGXFSZ in postauth monitor (mindrot#2263)
  - sshd-keygen - don't generate DSA and ED25519 host keys in FIPS mode


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-9 + 0.9.3-3
changelog:
  - the .local domain example should be in ssh_config, not in sshd_config
  - use different values for DH for Cisco servers (#1026430)


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-11.1 + 0.9.3-3
changelog:
  - error message if scp when directory doesn't exist (#1142223)
  - parsing configuration file values (#1130733)
  - documentation in service and socket files for systemd (#1181593)
  - updated ldap patch (#981058)
  - fixed vendor-patchlevel
  - add new option GSSAPIEnablek5users and disable using ~/.k5users by default CVE-2014-9278 (#1170745)


author: Jakub Jelen <jjelen@redhat.com> 6.7p1-3 + 0.9.3-4
changelog:
  - update coverity patch
  - make output of sshd -T more consistent (#1187521)
  - enable seccomp for sandboxing instead of rlimit (#1062953)
  - update hardening to compile on gcc5
  - Add SSH KDF CAVS test driver (#1193045)
  - Fix ssh-copy-id on non-sh remote shells (#1045191)


author: Jakub Jelen <jjelen@redhat.com> 6.7p1-6 + 0.9.3-4
changelog:
  - Update seccomp filter to work on i686 architectures (#1194401)
  - Fix previous failing build (#1195065)


author: Jakub Jelen <jjelen@redhat.com> 6.7p1-9 + 0.9.3-4
changelog:
  - Adjust seccomp filter for primary architectures and solve aarch64 issue (#1197051)
  - Solve issue with ssh-copy-id and keys without trailing newline (#1093168)


author: Jakub Jelen <jjelen@redhat.com> 6.7p1-11 + 0.9.3-4
changelog:
  - Ability to specify LDAP filter in ldap.conf for ssh-ldap-helper
  - Fix auditing when using combination of ForceCommand and PTY
  - Add sftp option to force mode of created files (from rhel)
  - Fix tmpfiles.d entries to be more consistent (#1196807)


author: Jakub Jelen <jjelen@redhat.com> 6.8p1-1 + 0.9.3-5
changelog:
  - new upstream release openssh-6.8p1 (#1203245)
  - Resolve segfault with auditing commands (#1203900)
  - Workaround krb5-config bug (#1204646)


author: Jakub Jelen <jjelen@redhat.com> 6.8p1-3 + 0.9.3-5
changelog:
  - Fixed issue with GSSAPI key exchange (#1207719)
  - Add pam_namespace to sshd pam stack (based on #1125110)
  - Remove krb5-config workaround for #1203900
  - Fix handling SELinux context in MLS systems
  - Regression: solve sshd segfaults if other instance already running


author: Jakub Jelen <jjelen@redhat.com> 6.8p1-6 + 0.9.3-5
changelog:
  - Resolve problem with pam_ssh_agent_auth after rebase (#1225106)
  - ssh-copy-id: tcsh doesnt work with multiline strings
  - Fix upstream memory problems
  - Add missing options in testmode output and manual pages
  - Provide LDIF version of LPK schema
  - Document required selinux boolean for working ssh-ldap-helper


author: Jakub Jelen <jjelen@redhat.com> 6.9p1-1 + 0.9.3-6
changelog:
  - New upstream release (#1238253)
  - Increase limitation number of files which can be listed using glob in sftp
  - Correctly revert "PermitRootLogin no" option from upstream sources (#89216)


author: Jakub Jelen <jjelen@redhat.com> 6.9p1-2 + 0.9.3-6
changelog:
  - Enable SECCOMP filter for s390* architecture (#1195065)
  - Fix race condition when multiplexing connection (#1242682)


author: Jakub Jelen <jjelen@redhat.com> 7.0p1-1 + 0.9.3-7
changelog:
  - New upstream release (#1252639)
  - Fix pam_ssh_agent_auth package (#1251777)
  - Security: Use-after-free bug related to PAM support (#1252853)
  - Security: Privilege separation weakness related to PAM support (#1252854)
  - Security: Incorrectly set TTYs to be world-writable (#1252862)


author: Jakub Jelen <jjelen@redhat.com> 7.0p1-2 + 0.9.3-7
changelog:
  - Fix problem with DSA keys using pam_ssh_agent_auth (#1251777)
  - Add GSSAPIKexAlgorithms option for server and client application
  - Possibility to validate legacy systems by more fingerprints (#1249626)


author: Jakub Jelen <jjelen@redhat.com> 7.1p1-3 + 0.9.2-8
changelog:
  - Fix FIPS mode for DH kex (#1260253)
  - Provide full RELRO and PIE form askpass helper (#1264036)
  - Fix gssapi key exchange on server and client (#1261414)
  - Allow gss-keyex root login when without-password is set (upstream #2456)
  - Fix obsolete usage of SELinux constants (#1261496)


author: Jakub Jelen <jjelen@redhat.com> 7.1p1-4 + 0.9.2-8
changelog:
  - Review SELinux user context handling after authentication (#1269072)
  - Handle root logins the same way as other users (#1269072)
  - Audit implicit mac, if mac is covered in cipher (#1271694)
  - Increase size limit for remote glob over sftp


author: Jakub Jelen <jjelen@redhat.com> 7.1p1-6 + 0.9.2-8
changelog:
  - Preserve IUTF8 tty mode flag over ssh connections (#1270248)
  - Do not require sysconfig file to start service (#1279521)
  - Update ssh-copy-id to upstream version
  - GSSAPI Key Exchange documentation improvements
  - Remove unused patches


author: Jakub Jelen <jjelen@redhat.com> 7.1p1-7 + 0.9.2-8
changelog:
  - Change RPM define macros to global according to packaging guidelines
  - Fix wrong handling of SSH_COPY_ID_LEGACY environment variable
  - Update ssh-agent and ssh-keysign permissions (#1296724)
  - Fix few problems with alternative builds without GSSAPI or openSSL
  - Fix condition to run sshd-keygen


author: Jakub Jelen <jjelen@redhat.com> 7.1p2-2 + 0.10.2-1
changelog:
  - Rebased to recent version of pam_ssh_agent_auth
  - Upstream fix for CVE-2016-1908
  - Remove useless defattr


author: Jakub Jelen <jjelen@redhat.com> 7.1p2-3 + 0.10.2-1
changelog:
  - Fix segfaults with pam_ssh_agent_auth (#1303036)
  - Silently disable X11 forwarding on problems
  - Systemd service should be forking to detect immediate failures


author: Jakub Jelen <jjelen@redhat.com> 7.1p2-4.1 + 0.10.2-1
changelog:
  - Fix race condition in auditing events when using multiplexing (#1308295)
  - Fix X11 forwarding CVE according to upstream
  - Fix problem when running without privsep (#1303910)
  - Remove hard glob limit in SFTP


author: Jakub Jelen <jjelen@redhat.com> 7.2p2-2 + 0.10.2-3
changelog:
  - Fix GSSAPI Key Exchange according to RFC (#1323622)
  - Remove init.d/functions dependency from sshd-keygen (#1317722)
  - Do not use MD5 in pam_ssh_agent_auth in FIPS mode


author: Jakub Jelen <jjelen@redhat.com> 7.2p2-3 + 0.10.2-3
changelog:
  - Make sshd-keygen comply with packaging guidelines (#1325535)
  - Soft-deny socket() syscall in seccomp sandbox (#1324493)
  - Remove *sha1 Kex in FIPS mode (#1324493)
  - Remove *gcm ciphers in FIPS mode (#1324493)


author: Jakub Jelen <jjelen@redhat.com> - 7.2p2-5 + 0.10.2-3
changelog:
  - CVE-2015-8325: ignore PAM environment vars when UseLogin=yes (#1328013)
  - Fix typo in sysconfig/sshd (#1325535)


author: Jakub Jelen <jjelen@redhat.com> - 7.2p2-7
changelog:
  - Fix regression in certificate-based authentication (#1333498)
  - Check for real location of .k5login file (#1328243)
  - Fix unchecked dereference in pam_ssh_agent_auth
  - Clean up old patches
  - Build with seccomp filter on ppc64(le) (#1195065)


author: Jakub Jelen <jjelen@redhat.com> - 7.2p2-8 + 0.10.2-3
changelog:
  - Enable seccomp filter for MIPS architectures
  - UseLogin=yes is not supported in Fedora
  - SFTP server forced permissions should restore umask
  - pam_ssh_agent_auth: Fix conflict bewteen two getpwuid() calls (#1349551)


author: Jakub Jelen <jjelen@redhat.com> - 7.2p2-10 + 0.10.2-3
changelog:
  - CVE-2016-6210: User enumeration via covert timing channel (#1357443)
  - Expose more information about authentication to PAM
  - Make closefrom() ignore softlinks to the /dev/ devices on s390


author: Jakub Jelen <jjelen@redhat.com> - 7.3p1-5 + 0.10.2-4
changelog:
  - Build against OpenSSL 1.1.0 with compat changes
  - Recommend crypto-policies
  - Fix chroot dropping capabilities (#1386755)


author: Jakub Jelen <jjelen@redhat.com> - 7.3p1-7 + 0.10.2-4
changelog:
  - Properly deserialize received RSA certificates in ssh-agent (#1402029)
  - Move MAX_DISPLAYS to a configuration option


author: Jakub Jelen <jjelen@redhat.com> - 7.4p1-1 + 0.10.2-5
changelog:
  - New upstream release (#1406204)
  - Cache supported OIDs for GSSAPI key exchange (#1395288)
  - Fix typo causing heap corruption (use-after-free) (#1409433)
  - Prevent hangs with long MOTD


author: Jakub Jelen <jjelen@redhat.com> - 7.4p1-2 + 0.10.2-5
changelog:
  - Fix ssh-agent cert signing error (#1416584)
  - Fix wrong path to crypto policies
  - Attempt to resolve issue with systemd


author: Jakub Jelen <jjelen@redhat.com> - 7.4p1-3 + 0.10.3-1
changelog:
  - Properly report errors from included files (#1408558)
  - New pam_ssh_agent_auth 0.10.3 release
  - Switch to SD_NOTIFY to make systemd happy


author: Jakub Jelen <jjelen@redhat.com> - 7.4p1-4 + 0.10.3-1
changelog:
  - Avoid sending the SD_NOTIFY messages from wrong processes (#1427526)
  - Address reports by coverity


author: Jakub Jelen <jjelen@redhat.com> - 7.5p1-2 + 0.10.3-2
changelog:
  - Fix various after-release typos including failed build in s390x (#1434341)
  - Revert chroot magic with SELinux


author: Jakub Jelen <jjelen@redhat.com> - 7.5p1-4 + 0.10.3-2
changelog:
  - Remove SSH-1 subpackage for Fedora 27 (#1474942)
  - Follow system-wide crypto policy in server (#1479271)


author: Jakub Jelen <jjelen@redhat.com> - 7.5p1-6 + 0.10.3-2
changelog:
  - Do not export KRB5CCNAME if the default path is used (#1199363)
  - Add enablement for openssl-ibmca and openssl-ibmpkcs11 (#1477636)
  - Add new GSSAPI kex algorithms with SHA-2, but leave them disabled for now
  - Enforce pam_sepermit for all logins in SSH (#1492313)
  - Remove pam_reauthorize, since it is not needed by cockpit anymore (#1492313)


author: Jakub Jelen <jjelen@redhat.com> - 7.6p1-1 + 0.10.3-3
changelog:
  - New upstream release OpenSSH 7.6
  - Addressing review remarks for OpenSSL 1.1.0 patch
  - Fix PermitOpen bug in OpenSSH 7.6
  - Drop support for ExposeAuthenticationMethods option


author: Jakub Jelen <jjelen@redhat.com> - 7.6p1-3 + 0.10.3-3
changelog:
  - Do not segfault during audit cleanup (#1524233)
  - Avoid gcc warnings about uninitialized variables


author: Jakub Jelen <jjelen@redhat.com> - 7.6p1-5 + 0.10.3-3
changelog:
  - Drop support for TCP wrappers (#1530163)
  - Do not pass hostnames to audit -- UseDNS is usually disabled (#1534577)


author: Jakub Jelen <jjelen@redhat.com> - 7.7p1-1 + 0.10.3-4
changelog:
  - New upstream release (#1563223)
  - Add support for ECDSA keys in PKCS#11 (#1354510)
  - Add support for PKCS#11 URIs


author: Jakub Jelen <jjelen@redhat.com> - 7.7p1-6 + 0.10.3-4
changelog:
  - Fix listing of kex algoritms in FIPS mode
  - Allow aes-gcm cipher modes in FIPS mode
  - Coverity fixes


author: Jakub Jelen <jjelen@redhat.com> - 7.8p1-2 + 0.10.3-5
changelog:
  - New upstream release fixing CVE 2018-15473
  - Remove unused patches
  - Remove reference to unused enviornment variable SSH_USE_STRONG_RNG
  - Address coverity issues
  - Unbreak scp between two IPv6 hosts (#1620333)
  - Unbreak GSSAPI key exchange (#1624323)
  - Unbreak rekeying with GSSAPI key exchange (#1624344)


author: Jakub Jelen <jjelen@redhat.com> - 7.8p1-3 + 0.10.3-5
changelog:
  - Disable OpenSSH hardening flags and use the ones provided by system (#1630615)
  - Ignore unknown parts of PKCS#11 URI (#1631478)
  - Do not fail with GSSAPI enabled in match blocks (#1580017)
  - Fix the segfaulting cavs test (#1629692)


author: Jakub Jelen <jjelen@redhat.com> - 7.8p1-4 + 0.10.3-5
changelog:
  - Unbreak PKCS#11 URI tests (#1648262)
  - Allow to disable RSA signatures with SHA1 (#1648898)
  - Dump missing GSS options from client configuration (#1649505)
  - Minor fixes from Fedora related to GSSAPI and keberos
  - Follow the system-wide PATH settings


author: Jakub Jelen <jjelen@redhat.com> - 8.0p1-1 + 0.10.3-7
changelog:
  - New upstream release (#1691045)
  - Remove support for unused VendorPatchLevel configuration option
  - Fix kerberos cleanup procedures (#1683295)
  - Do not negotiate arbitrary primes with DH GEX in FIPS (#1685096)
  - Several GSSAPI key exchange improvements and sync with Debian
  - Allow to use labels in PKCS#11 URIs even if they do not match on private key (#1671262)
  - Do not fall back to sshd_net_t SELinux context (#1678695)
  - Use FIPS compliant high-level signature OpenSSL API and KDF
  - Mention crypto-policies in manual pages
  - Do not fail if non-FIPS approved algorithm is enabled in FIPS
  - Generate the PEM files in new PKCS#8 format without the need of MD5 (#1712436)


author: Sahana Prasad <sahana@redhat.com> 1.1.1g-14
changelog:
  - Fix CVE-2021-3450 openssl: CA certificate check bypass with
    X509_V_FLAG_X509_STRICT
  - Fix CVE-2021-3449 NULL pointer deref in signature_algorithms processing


author: Daiki Ueno <dueno@redhat.com> 1.1.1g-16
changelog:
  - Use AI_ADDRCONFIG only when explicit host name is given
  - Allow only curves defined in RFC 8446 in TLS 1.3


author: Dmitry Belyavskiy <dbelyavs@redhat.com> - 1:1.1.1k-2
changelog:
  - Fixes FIPS_selftest to work in FIPS mode. Resolves: rhbz#1940085
  - Using safe primes for FIPS DH self-test


author: Sahana Prasad <sahana@redhat.com> - 1:1.1.1k-4
changelog:
  - Fixes bugs in s390x AES code.
  - Uses the first detected address family if IPv6 is not available
  - Reverts the changes in https://github.com/openssl/openssl/pull/13305
    as it introduces a regression if server has a DSA key pair, the handshake fails
    when the protocol is not explicitly set to TLS 1.2. However, if the patch is reverted,
    it has an effect on the "ssl_reject_handshake" feature in nginx. Although, this feature
    will continue to work, TLS 1.3 protocol becomes unavailable/disabled. This is already
    known - https://trac.nginx.org/nginx/ticket/2071#comment:1
    As per https://github.com/openssl/openssl/issues/16075#issuecomment-879939938, nginx
    could early callback instead of servername callback.
  - Resolves: rhbz#1978214
  - Related: rhbz#1934534


author: Bernhard Rosenkrdnzer <bero@redhat.de>
changelog:
  - inital packaging
  - changes from base:
    - Move /usr/local/ssl to /usr/share/ssl for FHS compliance
    - handle RPM_OPT_FLAGS


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.5a, modified for U.S.
  - add perl as a build-time requirement
  - move certificate makefile to another package
  - disable RC5, IDEA, RSA support
  - remove optimizations for now


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - byte-compile python extensions without the build-root
  - adjust the makefile to not remove temporary files (like .key files when
    building .csr files) by marking them as .PRECIOUS


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove -Wa,* and -m* compiler flags from the default Configure file (#20656)
  - add the CA.pl man page to the perl subpackage


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - disable some inline assembly, which on x86 is Pentium-specific
  - re-enable MD2 (see http://www.ietf.org/ietf/IPR/RSA-MD-all)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - re-disable MD2 -- the EVP_MD_CTX structure would grow from 100 to 152
    bytes or so, causing EVP_DigestInit() to zero out stack variables in
    apps built against a version of the library without it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.6
  - enable MD2
  - use the libcrypto.so and libssl.so targets to build shared libs with
  - bump the soversion to 1 because we're no longer compatible with any of
    the various 0.9.5a packages circulating around, which provide lib*.so.0


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.6a
  - use the build-shared target to build shared libraries
  - bump the soversion to 2 because we're no longer compatible with
    our 0.9.5a packages or our 0.9.6 packages
  - drop the patch for making rsatest a no-op when rsa null support is used
  - put all man pages into <section>ssl instead of <section>
  - break the m2crypto modules into a separate package


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a script for creating dummy certificates
  - move man pages from %{_mandir}/man?/foo.?ssl to %{_mandir}/man?ssl/foo.?


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-3
changelog:
  - add patches for AEP hardware support
  - add patch to keep trying when we fail to load a cert from a file and
    there are more in the file
  - add missing prototype for ENGINE_ubsec() in engine_int.h


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-4
changelog:
  - move man pages back to %{_mandir}/man?/foo.?ssl from
    %{_mandir}/man?ssl/foo.?
  - add an [ engine ] section to the default configuration file


author: Gary Benson <gbenson@redhat.com> stronghold-0.9.6c-1
changelog:
  - upgrade to 0.9.6c
  - bump BuildArch to i686 and enable assembler on all platforms
  - synchronise with shrimpy and rawhide
  - bump soversion to 3


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-30
changelog:
  - add configuration stanza for x86_64 and use it on x86_64
  - build for linux-ppc on ppc
  - start running the self-tests again


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7-6
changelog:
  - EVP_DecryptInit should call EVP_CipherInit() instead of EVP_CipherInit_ex(),
    to get the right behavior when passed uninitialized context structures
    (#83766)
  - build with -mcpu=ev5 on alpha family (#83828)


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7-8
changelog:
  - add fix to guard against attempts to allocate negative amounts of memory
  - add patch for CAN-2003-0078, fixing a timing attack


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-5
changelog:
  - add patch to harden against Klima-Pokorny-Rosa extension of Bleichenbacher's
    attack (CAN-2003-0131)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport fix for engine-used-for-everything from 0.9.7b
  - backport fix for prng not being seeded causing problems, also from 0.9.7b
  - add a check at build-time to ensure that RSA is thread-safe
  - keep perlpath from stomping on the libica configure scripts


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add security fixes for protocol parsing bugs (CAN-2003-0543, CAN-2003-0544)
    and heap corruption (CAN-2003-0545)
  - update RHNS-CA-CERT files
  - ease back on the number of threads used in the threading test


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-22
changelog:
  - add -Wa,--noexecstack to RPM_OPT_FLAGS so that assembled modules get tagged
    as not needing executable stacks


author: Phil Knirsch <pknirsch@redhat.com> 0.9.7a-24
changelog:
  - Use /dev/urandom instead of PRNG for libica.
  - Apply libica-1.3.5 fix for /dev/urandom in icalinux.c
  - Use latest ICA engine patch from IBM.


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-25
changelog:
  - add dependency on zlib-devel for the -devel package, which depends on zlib
    symbols because we enable zlib for libssl (#102962)


author: Joe Orton <jorton@redhat.com> 0.9.7a-27
changelog:
  - updated ca-bundle.crt: removed expired GeoTrust roots, added
    freessl.com root, removed trustcenter.de Class 0 root


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-33
changelog:
  - add an intermediate <openssl/opensslconf.h> which points to the right
    arch-specific opensslconf.h on multilib arches


author: Tomas Mraz <tmraz@redhat.com> 0.9.7e-1
changelog:
  - new upstream source, updated patches
  - added patch so we are hopefully ABI compatible with upcoming
    0.9.7f


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-1
changelog:
  - reenable optimizations on ppc64 and assembly code on ia64
  - upgrade to new upstream version (no soname bump needed)
  - disable thread test - it was testing the backport of the
    RSA blinding - no longer needed
  - added support for changing serial number to
    Makefile.certificate (#151188)
  - make ca-bundle.crt a config file (#118903)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-2
changelog:
  - add back RC4_CHAR on ia64 and x86_64 so the ABI isn't broken
  - disable broken bignum assembly on x86_64


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-3
changelog:
  - uninitialized variable mustn't be used as input in inline
    assembly
  - reenable the x86_64 assembly again


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-4
changelog:
  - move certificates to _sysconfdir/pki/tls (#143392)
  - move CA directories to _sysconfdir/pki/CA
  - patch the CA script and the default config so it points to the
    CA directories


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-6
changelog:
  - use poll instead of select in rand (#128285)
  - fix Makefile.certificate to point to /etc/pki/tls
  - change the default string mask in ASN1 to PrintableString+UTF8String


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-7
changelog:
  - fix CAN-2005-0109 - use constant time/memory access mod_exp
    so bits of private key aren't leaked by cache eviction (#157631)
  - a few more fixes from upstream 0.9.7g


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-9
changelog:
  - add *.so.soversion as symlinks in /lib (#165264)
  - remove unpackaged symlinks (#159595)
  - fixes from upstream (constant time fixes for DSA,
    bn assembler div on ppc arch, initialize memory on realloc)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-10
changelog:
  - fix CAN-2005-2969 - remove SSL_OP_MSIE_SSLV2_RSA_PADDING which
    disables the countermeasure against man in the middle attack in SSLv2
    (#169863)
  - use sha1 as default for CA and cert requests - CAN-2005-2946 (#169803)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8a-4
changelog:
  - fix build (-lcrypto was erroneusly dropped) of the updated libica
  - updated ICA engine to 1.3.6-rc3


author: Tomas Mraz <tmraz@redhat.com> - 0.9.8a-6
changelog:
  - fix stale open handles in libica (#177155)
  - fix build if 'rand' or 'passwd' in buildroot path (#178782)
  - initialize VIA Padlock engine (#186857)


author: Tomas Mraz <tmraz@redhat.com> - 0.9.8b-1
changelog:
  - upgrade to new version, stays ABI compatible
  - there is no more linux/config.h (it was empty anyway)


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - add ipv6 support to s_client and s_server (by Jan Pazdziora) (#198737)
  - add patches for BN threadsafety, AES cache collision attack hazard fix and
    pkcs7 code memleak fix from upstream CVS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-7
changelog:
  - fix CVE-2006-2937 - mishandled error on ASN.1 parsing (#207276)
  - fix CVE-2006-2940 - parasitic public keys DoS (#207274)
  - fix CVE-2006-3738 - buffer overflow in SSL_get_shared_ciphers (#206940)
  - fix CVE-2006-4343 - sslv2 client DoS (#206940)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-13
changelog:
  - allow building on ARM architectures (#245417)
  - use reference timestamps to prevent multilib conflicts (#218064)
  - -devel package must require pkgconfig (#241031)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-14
changelog:
  - use localhost in testsuite, hopefully fixes slow build in koji
  - CVE-2007-3108 - fix side channel attack on private keys (#250577)
  - make ssl session cache id matching strict (#233599)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-16
changelog:
  - fix CVE-2007-5135 - off-by-one in SSL_get_shared_ciphers (#309801)
  - fix CVE-2007-4995 - out of order DTLS fragments buffer overflow (#321191)
  - add alpha sub-archs (#296031)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-2
changelog:
  - enable some new crypto algorithms and features
  - add some more important bug fixes from openssl CVS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-3
changelog:
  - set default paths when no explicit paths are set (#418771)
  - do not add tls extensions to client hello for SSLv3 (#422081)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-9
changelog:
  - fix CVE-2008-0891 - server name extension crash (#448492)
  - fix CVE-2008-1672 - server key exchange message omit crash (#448495)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-1
changelog:
  - new upstream version with necessary soname bump (#455753)
  - temporarily provide symlink to old soname to make it possible to rebuild
    the dependent packages in rawhide
  - add eap-fast support (#428181)
  - add possibility to disable zlib by setting
  - add fips mode support for testing purposes
  - do not null dereference on some invalid smime files
  - add buildrequires pkgconfig (#479493)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-6
changelog:
  - drop the temporary triggerpostun and symlinking in post
  - fix the pkgconfig files and drop the unnecessary buildrequires
    on pkgconfig as it is a rpmbuild dependency (#481419)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-7
changelog:
  - must also verify checksum of libssl.so in the FIPS mode
  - obtain the seed for FIPS rng directly from the kernel device
  - drop the temporary symlinks


author: Tomas Mraz <tmraz@redhat.com> 0.9.8k-1
changelog:
  - update to new upstream release (minor bug fixes, security
    fixes and machine code optimizations only)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8k-6
changelog:
  - abort if selftests failed and random number generator is polled
  - mention EVP_aes and EVP_sha2xx routines in the manpages
  - add README.FIPS
  - make CA dir absolute path (#445344)
  - change default length for RSA key generation to 2048 (#484101)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.11.beta4
changelog:
  - update to new upstream version, no soname bump needed
  - fix CVE-2009-3555 - note that the fix is bypassed if SSL_OP_ALL is used
    so the compatibility with unfixed clients is not broken. The
    protocol extension is also not final.


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.12.beta4
changelog:
  - keep the beta status in version number at 3 so we do not have to rebuild
    openssh and possibly other dependencies with too strict version check


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.13.beta4
changelog:
  - disable enforcement of the renegotiation extension on the client (#537962)
  - add fixes from the current upstream snapshot


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.17.beta4
changelog:
  - upstream fix compression handling on session resumption
  - various null checks and other small fixes from upstream
  - upstream changes for the renegotiation info according to the latest draft


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.19.beta4
changelog:
  - fix CVE-2009-4355 - leak in applications incorrectly calling
    CRYPTO_free_all_ex_data() before application exit (#546707)
  - upstream fix for future TLS protocol version handling


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.21.beta5
changelog:
  - gracefully handle zero length in assembler implementations of
    OPENSSL_cleanse (#564029)
  - do not fail in s_server if client hostname not resolvable (#561260)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0c-2
changelog:
  - listen on ipv6 wildcard in s_server so we accept connections
    from both ipv4 and ipv6 (#601612)
  - fix openssl speed command so it can be used in the FIPS mode
    with FIPS allowed ciphers


author: Tomas Mraz <tmraz@redhat.com> 1.0.0c-3
changelog:
  - add -x931 parameter to openssl genrsa command to use the ANSI X9.31
    key generation method
  - use FIPS-186-3 method for DSA parameter generation
  - add OPENSSL_FIPS_NON_APPROVED_MD5_ALLOW environment variable
    to allow using MD5 when the system is in the maintenance state
    even if the /proc fips flag is on
  - make openssl pkcs12 command work by default in the FIPS mode


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-3
changelog:
  - add support for VIA Padlock on 64bit arch from upstream (#617539)
  - do not return bogus values from load_certs (#652286)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-6
changelog:
  - add support for newest Intel acceleration improvements backported
    from upstream by Intel in form of a separate engine


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-7
changelog:
  - correct openssl cms help output (#636266)
  - more tolerant starttls detection in XMPP protocol (#608239)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-8
changelog:
  - drop the separate engine for Intel acceleration improvements
    and merge in the AES-NI, SHA1, and RC4 optimizations
  - add support for OPENSSL_DISABLE_AES_NI environment variable
    that disables the AES-NI support


author: Tomas Mraz <tmraz@redhat.com> 1.0.0e-3
changelog:
  - do not use AVX instructions when osxsave bit not set
  - add direct known answer tests for SHA2 algorithms


author: Tomas Mraz <tmraz@redhat.com> 1.0.0g-1
changelog:
  - new upstream release fixing CVE-2012-0050 - DoS regression in
    DTLS support introduced by the previous release (#782795)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1-0.1.beta2
changelog:
  - new upstream release from the 1.0.1 branch, ABI compatible
  - add documentation for the -no_ign_eof option


author: Tomas Mraz <tmraz@redhat.com> 1.0.1-0.2.beta3
changelog:
  - epoch bumped to 1 due to revert to 1.0.0g on Fedora 17
  - new upstream release from the 1.0.1 branch
  - fix s390x build (#798411)
  - versioning for the SSLeay symbol (#794950)
  - add -DPURIFY to build flags (#797323)
  - filter engine provides
  - split the libraries to a separate -libs package
  - add make to requires on the base package (#783446)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-3
changelog:
  - fix DSA key generation in FIPS mode (#833866)
  - allow duplicate FIPS_mode_set(1)
  - enable build on ppc64 subarch (#834652)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-4
changelog:
  - do not move libcrypto to /lib
  - do not use environment variables if __libc_enable_secure is on
  - fix strict aliasing problems in modes


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-7
changelog:
  - add missing initialization of str in aes_ccm_init_key (#853963)
  - add important patches from upstream CVS
  - use the secure_getenv() with new glibc


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-8
changelog:
  - use 1024 bit DH parameters in s_server as 512 bit is not allowed
    in FIPS mode and it is quite weak anyway


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-11
changelog:
  - add script for renewal of a self-signed cert by Philip Prindeville (#871566)
  - allow X509_issuer_and_serial_hash() produce correct result in
    the FIPS mode (#881336)


author: Kyle McMartin <kyle@redhat.com> 1.0.1e-21
changelog:
  - [arm] use elf auxv to figure out armcap.c instead of playing silly
    games with SIGILL handlers. (#1006474)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-26
changelog:
  - make DTLS1 work in FIPS mode
  - avoid RSA and DSA 512 bits and Whirlpool in 'openssl speed' in FIPS mode


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-32
changelog:
  - disable verification of certificate, CRL, and OCSP signatures
    using MD5 if OPENSSL_ENABLE_MD5_VERIFY environment variable
    is not set


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-35
changelog:
  - drop weak ciphers from the default TLS ciphersuite list
  - add back some symbols that were dropped with update to 1.0.1 branch
  - more FIPS validation requirement changes


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-36
changelog:
  - fix CVE-2013-6449 - crash when version in SSL structure is incorrect
  - more FIPS validation requirement changes


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-37
changelog:
  - fix CVE-2013-4353 - Invalid TLS handshake crash
  - fix CVE-2013-6450 - possible MiTM attack on DTLS1


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-39
changelog:
  - make expiration and key length changeable by DAYS and KEYLEN
    variables in the certificate Makefile (#1058108)
  - change default hash to sha256 (#1062325)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-40
changelog:
  - print ephemeral key size negotiated in TLS handshake (#1057715)
  - add DH_compute_key_padded needed for FIPS CAVS testing


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1g-1
changelog:
  - new upstream release 1.0.1g
  - do not include ECC ciphersuites in SSLv2 client hello (#1090952)
  - fail on hmac integrity check if the .hmac file is empty


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1h-3
changelog:
  - make FIPS mode keygen bit length restriction enforced only when
    OPENSSL_ENFORCE_MODULUS_BITS is set
  - fix CVE-2014-0224 fix that broke EAP-FAST session resumption support


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1h-5
changelog:
  - disable SSLv2 and SSLv3 protocols by default (can be enabled
    via appropriate SSL_CTX_clear_options() call)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1i-1
changelog:
  - new upstream release fixing multiple moderate security issues
  - for now disable only SSLv2 by default


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1j-3
changelog:
  - disable SSLv3 by default again (mail servers and possibly
    LDAP servers should probably allow it explicitly for legacy
    clients)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1k-2
changelog:
  - test in the non-FIPS RSA keygen for minimal distance of p and q
    similarly to the FIPS RSA keygen


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1k-6
changelog:
  - fix CVE-2015-0209 - potential use after free in d2i_ECPrivateKey()
  - fix CVE-2015-0286 - improper handling of ASN.1 boolean comparison
  - fix CVE-2015-0287 - ASN.1 structure reuse decoding memory corruption
  - fix CVE-2015-0289 - NULL dereference decoding invalid PKCS#7 data
  - fix CVE-2015-0293 - triggerable assert in SSLv2 server


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1k-7
changelog:
  - drop the AES-GCM restriction of 2^32 operations because the IV is
    always 96 bits (32 bit fixed field + 64 bit invocation field)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.2e-1
changelog:
  - minor upstream release 1.0.2e fixing moderate severity security issues
  - enable fast assembler implementation for NIST P-256 and P-521
    elliptic curves (#1164210)
  - filter out unwanted link options from the .pc files (#1257836)
  - do not set serial to 0 in Makefile.certificate (#1135719)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.2f-1
changelog:
  - minor upstream release 1.0.2f fixing security issues
  - add support for MIPS secondary architecture


author: Tomáš Mráz <tmraz@redhat.com> 1.0.2g-2
changelog:
  - reenable SSL2 in the build to avoid ABI break (it does not
    make the openssl vulnerable to DROWN attack)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.2i-1
changelog:
  - minor upstream release 1.0.2i fixing security issues
  - move man pages for perl based scripts to perl subpackage (#1377617)


author: Tomáš Mráz <tmraz@redhat.com> 1.1.0b-4
changelog:
  - use a random seed if the supplied one did not generate valid
    parameters in dsa_builtin_paramgen2()


author: Tomáš Mráz <tmraz@redhat.com> 1.1.0c-2
changelog:
  - EC curve NIST P-224 is now allowed, still kept disabled in TLS due
    to less than optimal security


author: Tomáš Mráz <tmraz@redhat.com> 1.1.0c-3
changelog:
  - revert SSL_read() behavior change - patch from upstream (#1394677)
  - fix behavior on client certificate request in renegotiation (#1393579)


author: Tomáš Mráz <tmraz@redhat.com> 1.1.0e-1
changelog:
  - update to upstream version 1.1.0e
  - add documentation of the PROFILE=SYSTEM special cipher string (#1420232)


author: Tomáš Mráz <tmraz@redhat.com> 1.1.0f-1
changelog:
  - update to upstream version 1.1.0f
  - SRP and GOST is now allowed, note that GOST support requires
    adding GOST engine which is not part of openssl anymore


author: Tomáš Mráz <tmraz@redhat.com> 1.1.0g-6
changelog:
  - one more try to apply RPM_LD_FLAGS properly (#1541033)
  - dropped unneeded starttls xmpp patch (#1417017)


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1-1
changelog:
  - update to the final 1.1.1 version
  - for consistent support of security policies we build
    RC4 support in TLS (not default) and allow SHA1 in SECLEVEL 2
  - use only /dev/urandom if getrandom() is not available
  - disable SM4


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1b-1
changelog:
  - update to the 1.1.1b release
  - EVP_KDF API backport from master
  - SSH KDF implementation for EVP_KDF API backport from master
  - add S390x chacha20-poly1305 assembler support from master branch


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-2
changelog:
  - do not try to use EC groups disallowed in FIPS mode
    in TLS
  - fix Valgrind regression with constant-time code


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-6
changelog:
  - backport of S390x ECC CPACF enhancements from master
  - FIPS mode: properly disable 1024 bit DSA key generation
  - FIPS mode: skip ED25519 and ED448 algorithms in openssl speed
  - FIPS mode: allow AES-CCM ciphersuites


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-8
changelog:
  - fix CVE-2019-1547 - side-channel weak encryption vulnerability
  - fix CVE-2019-1563 - padding oracle in CMS API
  - fix CVE-2019-1549 - ensure fork safety of the DRBG
  - fix handling of non-FIPS allowed EC curves in FIPS mode
  - fix TLS compliance issues


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1c-14
changelog:
  - fix incorrect error return value from FIPS_selftest_dsa
  - S390x: properly restore SIGILL signal handler


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1g-7
changelog:
  - Disallow dropping Extended Master Secret extension
    on renegotiation
  - Return alert from s_server if ALPN protocol does not match
  - SHA1 is allowed in @SECLEVEL=2 only if allowed by
    TLS SigAlgs configuration


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1g-9
changelog:
  - Rewire FIPS_drbg API to use the RAND_DRBG
  - Use the well known DH groups in TLS even for 2048 and 1024 bit parameters


author: Tomáš Mráz <tmraz@redhat.com> 1.1.1g-12
changelog:
  - Implemented new FIPS requirements in regards to KDF and DH selftests
  - Disallow certificates with explicit EC parameters


author: Anderson Sasaki <ansasaki@redhat.com> - 0.4.8-1
changelog:
  - Update to 0.4.8-1
  - RSA key generation on the token
  - RSA-OAEP and RSA-PKCS encryption support
  - RSA-PSS signature support
  - Support for OpenSSL 1.1.1 beta
  - Removed support for OpenSSL 0.9.8
  - Various bug fixes and enhancements


author: Anderson Sasaki <ansasaki@redhat.com> - 0.4.8-2
changelog:
  - Require OpenSSL >= 1.0.2
  - Fixed missing declaration of ERR_get_CKR_code()
  - Add support to use EC keys and tests (#1625338)
  - Exposed check_fork() API
  - Fixed memory leak of RSA objects in pkcs11_store_key()
  - Updated OpenSSL license in eng_front.c
  - Fixed build for old C dialects
  - Allow engine to use private key without PIN
  - Require DEBUG to be defined to print debug messages
  - Changed package description


author: Anderson Sasaki <ansasaki@redhat.com> - 0.4.10-1
changelog:
  - Update to 0.4.10 (#1745082)
  - Add BuildRequires for OpenSSL >= 1.0.2, required for testing
  - Print tests logs if failed during build
  - Small bug fixes such as removal of unused variable
  - Search objects in all matching tokens (#1705505)


author: Neal Gompa <ngompa13@gmail.com> - 1.74-1
changelog:
  - Update to upstream version 1.74
  - Drop merged patches
  - Rediff remaining patches
  - Move newns to /usr/libexec/os-prober (debuginfo generation works)
  - Mark copyright file as license file


author: Peter Jones <pjones@redhat.com> - 1.74-7
changelog:
  - Make gcc use -Wl,-z,now -Wl,-z,relro -pie.  Dunno why the default didn't
    pick this up.
    Resolves: rhbz#1624158


author: Daiki Ueno <dueno@redhat.com> - 0.23.21-4
changelog:
  - Fix realloc usage on proxy cleanup (#1894979)
  - Make 'trust anchor --store' preserve all attributes from .p11-kit files


author: Daiki Ueno <dueno@redhat.com> - 0.23.22-1
changelog:
  - Rebase to 0.23.22 to fix memory safety issues (CVE-2020-29361, CVE-2020-29362, and CVE-2020-29363)
  - Preserve DT_NEEDED information from the previous version, flagged by rpmdiff
  - Add xsltproc to BR


author: Tomáš Mráz <tmraz@redhat.com> 1.3.1-5
changelog:
  - pam_faillock: Support configuration file /etc/security/faillock.conf
  - pam_faillock: Support local_users_only option
  - pam_namespace: Support noexec, nosuid and nodev flags for tmpfs mounts
  - Drop tallylog and pam_tally[2] documentation
  - pam_lastlog: Do not display failed attempts with PAM_SILENT flag
  - pam_lastlog: Support unlimited option to override fsize limit
  - pam_unix: Log if user authenticated without password
  - pam_tty_audit: Improve manual page
  - Optimize closing fds when spawning helpers
  - Fix duplicate password verification in pam_authtok_verify()


author: Iker Pedrosa <ipedrosa@redhat.com> 1.3.1-9
changelog:
  - pam_usertype: new module to tell if uid is in login.defs ranges (#1810474)
  - pam_tty_audit: if kernel audit is disabled return PAM_IGNORE (#1775357)


author: Peter Robinson <pbrobinson@redhat.com> - 1.3.1-12
changelog:
  - Add the motd.d directories (empty) to silence warnings and to
    provide proper ownership for them (#1847501)


author: Iker Pedrosa <ipedrosa@redhat.com> 1.3.1-13
changelog:
  - pam_wheel: if getlogin fails fallback to PAM_RUSER: fixed malformed patch (#1866866)
  - pam_namespace: polyinstantiation refer to gdm doc (#1861841)


author: Brian C. Lane <bcl@redhat.com> - 3.2-33
changelog:
  - Switch gpt-header-move and msdos-overlap to python3 (bcl)
    Resolves: rhbz#1595810
  - Modify gpt-header-move and msdos-overlap to work with py2 or py3 (bcl)
    Related: rhbz#1595810


author: Brian C. Lane <bcl@redhat.com> - 3.2-34
changelog:
  - Fix the length of several strncpy calls (bcl)
    Related: rhbz#1602652
  - parted.c: Always free peek_word (bcl)
    Related: rhbz#1602652
  - parted.c: Make sure dev_name is freed (bcl)
    Related: rhbz#1602652
  - t6100-mdraid-partitions: Use v0.90 metadata for the test (bcl)
  - Fix msdos-overlap to work correctly with py2 or py3 (bcl)
    Related: rhbz#1595810


author: Brian C. Lane <bcl@redhat.com> - 3.2-35
changelog:
  - Use python3-devel in buildroot
    Resolves: rhbz#1615576
  - linux.c: Use sys/sysmacros.h for major/minor
    Resolves: rhbz#1615592


author: Brian C. Lane <bcl@redhat.com> - 3.2-37
changelog:
  - Add CI tests
    Resolves: rhbz#1653912
  - t6000-dm: Stop using private lvm root
    Related: rhbz#1653912


author: Brian C. Lane <bcl@redhat.com> - 3.2-39
changelog:
  - tests: Add a test for resizepart on a busy partition (bcl)
    Related: rhbz#1861804
  - parted: Preserve resizepart End when prompted for busy partition (bcl)
    Resolves: rhbz#1861804
  - Fix end_input usage in do_resizepart (bcl)
    Related: rhbz#1861804
  - tests: Test incomplete resizepart command (bcl)
    Related: rhbz#1861804
  - Fix resizepart iec unit end sector (psusi)
    Related: rhbz#1861804
  - libparted: Fix endian bug in bsd.c (AWilcox)
    Resolves: rhbz#1980105


author: Than Ngo <than@redhat.com> - 2.7.6-10
changelog:
  - CVE-2019-13636 , Don't follow symlinks unless --follow-symlinks is given
  - Resolves: #1665928, patch has a huge error output and segfaults when the file to be patched does not exist


author: Michal Hlavinka <mhlavink@redhat.com> - 3.7.0-1
changelog:
  - pciutils updated to 3.7.0, add support for basic DVSEC and CXL DVSEC (#1856436)
  - add support for RCEC Associated Endpoint (#1856440)


author: Petr Pisar <ppisar@redhat.com> - 8.41-6
changelog:
  - Fix returning unset groups in POSIX interface if REG_STARTEND has a non-zero
    starting offset (upstream bug #2244)


author: Petr Pisar <ppisar@redhat.com> - 8.42-2
changelog:
  - Fix handling UTF and start-of-pattern options in C++ wrapper
    (upstream bug #2283)
  - Fix an error message and locale handling in pcregrep tool


author: Petr Pisar <ppisar@redhat.com> - 8.42-3
changelog:
  - Fix autopossessifying a repeated negative class with no characters less than
    256 that is followed by a positive class with only characters less than 256
    (bug #1619228)


author: Petr Pisar <ppisar@redhat.com> - 8.42-5
changelog:
  - Fix CVE-2019-20838 (a subject buffer overread in JIT when UTF is disabled
    and \X or \R has a greater than 1 fixed quantifier) (bug #1852252)
  - Fix CVE-2020-14155 (an integer overflow when parsing numbers after "(?C"))
    (bug #1851552)


author: Petr Pisar <ppisar@redhat.com> - 10.31-6
changelog:
  - Fix global search/replace in pcre2test and pcre2_substitute() when the pattern
    matches an empty string, but never at the starting offset


author: Petr Pisar <ppisar@redhat.com> - 10.31-7
changelog:
  - Fix checking that a lookbehind assertion has a fixed length if the
    lookbehind assertion is used inside a lookahead assertion
  - Fix parsing VERSION conditions


author: Petr Pisar <ppisar@redhat.com> - 10.31-8
changelog:
  - Fix backtracking atomic groups when they are not separated by something with
    a backtracking point


author: Petr Pisar <ppisar@redhat.com> - 10.31-9
changelog:
  - Recognize all Unicode space characters with /x option in a pattern
    (bug #1617960)
  - Fix changing dynamic options (bug #1617960)
  - Fix autopossessifying a repeated negative class with no characters less than
    256 that is followed by a positive class with only characters less than 255,
    (bug #1617960)
  - Fix autopossessifying a repeated negative class with no characters less than
    256 that is followed by a positive class with only characters less than 256,
    (bug #1617960)


