# changelog

author: Nick Clifton <nickc@redhat.com> - 9.32-1
changelog:
  - annocheck: Add tests for the AArch64 BTI and PAC security features.  (#1862478)
  - gcc plugin: Use a 4 byte offset for PowerPC start symbols, so that they do not break disassemblies.
  - gcc plugin: Correct the detection of 32-bit x86 builds.  (#1876197)


author: Nick Clifton <nickc@redhat.com> - 9.35-2
changelog:
  - Correct the directory chosen for 32-bit LLVM and Clang plugins.  (#1884951)
  - Allow the use of the SHF_LINK_ORDER section flag to discard unused notes.  (Experimental).
  - gcc-plugin: Fix test for empty PowerPC sections.  (#1880634)


author: Nick Clifton <nickc@redhat.com> - 9.46-1
changelog:
  - Annocheck: Support enabling/disabling future fails.
  - GCC plugin: Always record global notes for the .text.startup,
    .text.exit, .text.hot and .text.cold sections.
  - Clang plugin: Add -lLLVM to the build command line.
  - Annocheck: Improve reporting of missing -D_FORTIFY_SOURCE option.  (#1898075)
  - Annocheck: Improve reporting of missing LTO option.
  - Add detecting of gimple compiled binaries.
  - Add --without-gcc-plugin option.
  - Annocheck: Fix bug parsing DW_AT_producer.
  - Add test of .note.gnu.property section for PowerPC.
  - Add test of objcopy's ability to merge notes.
  - Record the -flto setting and produce a soft warning if it is absent.
  - Suppress warnings about _D_GLIBCXX_ASSERTIONS if the source code is known to be something other than C++.


author: Nick Clifton <nickc@redhat.com> - 9.49-1
changelog:
  - annocheck: Fix notes analyzer to accept empty PPC64 notes.
  - gcc plugin: Tweak generation of end symbols for PPC64 when LTO is active.  (#1898075)(#1904479)
  - gcc plugin: Add support for GCC 11's cl_vars array.


author: Nick Clifton <nickc@redhat.com> - 9.64-1
changelog:
  - Annocheck: Fix detection of special function names.  (#1934189)
  - Annocheck: FAIL the deliberate use of -fno-stack-protector, but add some exceptions for glibc.  (#1923439)
  - Annocheck: Add colour to some messages.  Skip the deliberate use of -fno-stack-protector.  (#1923439)
  - Annocheck: Fix some problems with tests for missing notes.
  - Add some GO tests to annocheck.
  - Add a future fail for the presence of RPATH in the dynamic tags.
  - Add the ability to disable the warning message about -D_FORTIFY_SOURCE being missing.
  - Workaround for elflint problems with PPC compiled files.  (#1880634)
  - Fix bogus AArch64 test failures.
  - Improved testing by annocheck.  Add fixed format message mode.
  - Fix inconsistency reporting -fcf-protection and -fstack-clash-protection results.
  - Add support for -D_FORTIFY_SOURCE=3.
  - annocheck: When a binary is produced both by GAS and GCC, select GAS as the real producer.  (#1906171)
  - annocheck: Improve test for LTO compiled binaries that do not have -Wall annotations.  (#1906171)


author: Nick Clifton <nickc@redhat.com> - 9.72-1
changelog:
  - Rebase to 9.72.  (#1960299)
  - annocheck: Accept 0 as a valid number for gcc minor versions and release numbers.
  - gcc-plugin: Add support for ARM and RISCV targets.
  - timing: do not initialise the clock if the timing tool is disabled.
  - gcc-plugin: Replace ICE messsages with verbose messages.
  - Fix the testsuite so that it can be run in parallel.
  - Annocheck: WARN if the annobin plugin was built for a newer version of the compiler than the one on which it was run.  (#1950657)
  - Annocheck: Improve detection of missing GNU-stack support.
  - Correct a package rename (bug #1949570)
  - Require docs subpackage by the other ones because of a license
  - Build-requiring perl-interpreter is enough
  - Fix bz1949570
  - Fix anomolies reported by covscan.
  - Move documentation into a sub-package.


author: Nick Clifton <nickc@redhat.com> - 10.06-1
changelog:
  - Rebase to 10.06.  (#2002351)
  - GCC Plugin: Fix detection of running inside the LTO compiler.  (#2004917)
  - Annocheck: Do not insist on the DT_AARCH64_PAC_PLT flag being present in AArch64 binaries.
  - Annocheck: With gaps at the start/end of the .text section, check for special symbols before displaying a MAYB result.
  - Annocheck: Do not set CFLAGS/LDFLAGS when building.  Take from environment instead.
  - Annocheck: Fix exit code when tests PASS.
  - Documentation: Add node for each hardening test.
  - Documentation: Install online.
  - Annocheck: Annote FAIL and MAYB results with URL to documentation
  - Annocheck: Add --no-urls and --provide-urls options
  - Annocheck: Add --help-<tool> option.
  - Annocheck: Fix fuzzing detected failures.
  - Annocheck: Add --profile option.
  - Docs: Document --profile option and rpminspect.yaml.
  - Annocheck: Skip GO/CET checks.  Fix fuzzing detected failures.
  - LLVM Plugin: Automatically choose the correct tests to run, based upon the version of Clang installed. (#1997444)
  - Annocheck: Fix memory corruption.  (#1996963)
  - Annocheck: Fix conditionalization of AArch64's PAC+BTI detection.
  - Annocheck: Add linker generated function for ppc64le exceptions.  (#1981410)
  - LLVM Plugin: Allow checks to be selected from the command line.
  - Annocheck: Examine DW_AT_producer for -flto.    
  - Annocheck: Conditionalize detection of AArch64's PAC+BTI protection.
  - Annocheck: Add linker generated function for s390x exceptions.  (#1981410)
  - Annocheck: Generate MAYB results for gaps in notes covering the .text section.  (#1991943)
  - Annocheck: Close DWARF file descriptors once the debug info is no longer needed.  (#1981410)
  - LLVM Plugin: Update to build with Clang v13.  (Thanks to: Tom Stellard <tstellar@redhat.com>)
  - Annocheck: Fix memory corruption.  (#1988715)
  - Annocheck: Skip certain tests for kernel modules.
  - Annocheck: Detect a missing CET note.  (#1991931)
  - Annocheck: Do not report future fails for AArch64 notes.
  - Annocheck: Warn about multiple --debug-file, --debug-rpm and --debug-dir options.
  - Annocheck: Process files in command line order.  (#1988714)
  - Annocheck: Reverse AArch64 PAC+BTI check, ie fail if they are enabled.  (#1984995)
  - Annocheck: Add another test exceptions.
  - Annocheck: Add some more test exceptions.
  - Tests: Skip glibc-notes test if the assembler does not support --generate-missing-build-notes.  (#1978573)
  - Tests: Skip objcopy test if objcopy does not support --merge-notes.
  - Annocheck: Fix spelling mistake in -mstack-realign failure message.  (#1977349)
  - gcc-plugin: Do not record global versions of stack protection settings in LTO mode, if not set.  (#1958954)
  - Annocheck: Remove limit on number of input files.
  - clang/llvm plugins: Build with correct security options.
  - Annocheck: Better detection of GO compiler version.
  - Annocheck: Better support for symbolic links.
  - Annocheck: In verbose mode, report the reason for skipping specific tests.  (#1969584)
  - Annocheck: Improve detection of shared libraries.  (#1958954)


author: Nick Clifton <nickc@redhat.com> - 10.09-1
changelog:
  - Annocheck: Add more cases of glibc startup functions.  (#1981410)
  - Annocheck: Fix covscan detected problems.
  - Annocheck: Add --profile=el8.
  - gcc-plugin: Conditionalize generation of branch protection note.
  - Annocheck: Ignore gaps containing NOP instructions.


author: Nick Clifton <nickc@redhat.com> - 10.10-1
changelog:
  - Annocheck: Fix cf-prot test to fail if the CET notes are missing.  (#2010671)
  - Annocheck: Skip gaps in the .plt section.  (#2010675)
  - Plugins: Add -g option when building LLVM and Clang. (#2010675)


author: Nick Clifton <nickc@redhat.com> - 10.11-1
changelog:
  - Annocheck: Fix covscan detected flaws.  (#201129)
  - plugins: Add more required build options.  (#2011163)


author: Nick Clifton <nickc@redhat.com> - 10.13-1
changelog:
  - Annocheck: Fix memory corruptions when using --debug-path and when a corrupt note is found.  (#20011438)
  - Annocheck: Fix MAYB results for mixed GO/C files.
  - Annocheck: Move some messages from VERBOSE to VERBOSE2.
  - Annocheck: Scan zero-length tool notes.  (#2011818)


author: Nick Clifton <nickc@redhat.com> - 10.15-1
changelog:
  - Annocheck: Add tests based upon recent bug fixes.
  - Annocheck: Another tweak to glibc detection code.


author: Nick Clifton <nickc@redhat.com> - 10.20-1
changelog:
  - annocheck: Add more glibc function names.  (#2017039)
  - gcc-plugin: Fix attaching the .text section to the .text.group section.
  - Complain about DT_RPATH for Fedora binaries.
  - Better reporting of problems in object files.  (#2013708)
  - Add a requirement on llvm-libs for clang and llvm plugins.  (#2014573)
  - Fix configuring annocheck without gcc-plugin.
  - Annocheck: Better reporting of debuginfod problems.
  - Tests: Fix bugs in debuginfod test.


author: Nick Clifton <nickc@redhat.com> - 10.23-1
changelog:
  - Annocheck: Add a test for unicode characters in identifiers.  (#2017363)
  - gcc-plugin: Default to link-order grouping for PPC64LE.  (#2016458)


author: Nick Clifton <nickc@redhat.com> - 10.27-1
changelog:
  - Annocheck: Skip missing fortify/warning notes for ARM32.
  - gcc-plugin: Try another fix for ppc64le section grouping.  (#2023437)
  - gcc-plugin: Revert 10.22 change.  (#2023437)
  - Annocheck: Add exception for /usr/sbin/ldconfig.  (#2022973)


author: Nick Clifton <nickc@redhat.com> - 10.28-1
changelog:
  - gcc-plugin: Fix bug creating empty attachments.  (#2026944)
  - Annocheck: Change MAYB result to SKIP for DT_RPATH.  (#2026300)


author: Nick Clifton <nickc@redhat.com> - 10.58-1
changelog:
  - Rebase to 10.58.  (#2067148)
  - gcc-plugin: Do not issue warning messages for autoconf generated source files.  (#2009958)
  - Annocheck: Update documentation and fix typo in annocheck.  (#2061291)
  - Annocheck: Add option to enable/disable following symbolic links.
  - Annocheck: Always identify Rust binaries, even if built on a host that does not know about Rust.  (#2057737)
  - Spec File: Use a different method to disable the annobin plugin  (#2054571)
  - Annocheck: Accept static GO binaries.  (#2053606)
  - gcc-plugin: Fix libtool so that extraneous runpaths are not added to the plugin.  (#2047356)
  - gcc-plugin: Use canonical_option field of save_decoded_options array. (#2047148)
  - Annocheck: Add an option to disable the use of debuginfod (if available).
  - Annocheck: Add more glibc special file names.
  - Annocheck: Skip some tests for BPF binaries.  (#2044897)
  - Annocheck: Skip property note test for GO binaries.  (#204300)
  - Annocheck: Add another glibc static library symbol.  (#2043047)
  - Spec File: Use gcc --print-file-name=rpmver for the gcc version info.
  - GCC Plugin: Do not fail if a section cannot be attached to a group.
  - Annocheck: Improve detection of kernel modules.
  - GCC Plugin: Only default to link-once when using gcc-12 or later.  (#2039297)
  - Annocheck: Add option to disable instrumentation test.
  - GCC Plugin: Fix building with gcc-12.
  - Spec file: Add requirement on cpio for annocheck.  (#2039747)
  - Annocheck: Add even more glibc function names. (#2037333)
  - Annocheck: ARM: Do not fail tests that rely upon annobin notes.
  - Annocheck: Extend list of known glibc functions.  (#2037333)
  - Annocheck: Ignore gaps that contain the _start symbol (for AArch64).  (#1995224)
  - Annocheck: Ignore more glibc special binaries.  (#2037220)
  - Annocheck: Do not complaining about missing stack clash notes if the compilation used LTO.  (#2034946)
  - Annocheck: Add /usr/lib/ld-linux-aarch64.so.1 to the list of known glibc binaries.  (#2033255)
  - Docs: Note that ENDBR is only needed as the landing pad for indirect branches/calls.  (#28705)
  - Spec File: Store full	gcc version release string in plugin info file.  (#2030671)
  - Annocheck: Add special case for x86_64 RHEL-7 gaps.  (#2031133)
  - Annocheck: Do not complaining about missing -mstackrealign notes in LTO mode.  (#2030298)
  - GCC Plugin: Do not record missing -mstackrealign in LTO mode.
  - Tests: Fix gaps and stat tests to use newly built annobin plugin.  (#2028063)
  - Annocheck: Ignore gaps in binaries at least partial built by golang.  (#2028583)
  - Annocheck: Allow spaces in gloang symbols.  (#2028583)
  - Annocheck: Initial deployment of libannocheck.  (#2028063)
  - gcc-plugin: Fix bug creating empty attachments.
  - Annocheck: Change MAYB result to SKIP for DT_RPATH.  (#2026300)
  - Annocheck: Skip missing fortify/warning notes for ARM32.


author: Nick Clifton <nickc@redhat.com> - 10.64-1
changelog:
  - Annocheck: Add more special cases for AArch64 glibc on RHEL-8.  (#2072082)
  - llvm-plugin: Fix a thinko in the sources.
  - gcc-plugin: Add remap of OPT_Wall.
  - configure: Fix typo in top level configure.ac.
  - Add support for building using meson+ninja.
  - Annocheck: Fix test for AArch64 property notes.  (#2068657)
  - gcc-plugin: Do not issue warning messages for autoconf generated source files.  (#2009958)


author: Nick Clifton <nickc@redhat.com> - 10.67-1
changelog:
  - Rebuild against LLVM 14.  (#2064521)
  - Annocheck: Do not complain about missing -mbranch-protection option in AArch64 binaries if compiled by golang.
  - Annocheck: Do not complain about missing -mbranch-protection option in AArch64 binaries if compiled in LTO mode.
  - gcc-plugin: Add support for CLVC_INTEGER options.


author: Nick Clifton <nickc@redhat.com> - 10.94-1
changelog:
  - Rebase to 10.94.  (#2151312)
  - Annocheck: Better detection of binaries which do not contain code.  (#2144533)
  - Annocheck: Provide more information when a test is skipped because the file being tested was not compiled.
  - Annocheck: Try harder not to run mutually exclusive tests.
  - Tests: Fix future-test so that it properly handles the situation where the compiler does not support the new options.
  - Libannocheck: Actually set result fields after tests are run.
  - Libannocheck: Replace libannocheck_version variable with LIBANNOCHECK_VERSION define.
  - Libannocheck: Remove 'Requires binutils-devel' from libannocheck.pc.
  - Libannocheck: Move into separate sub-package.
  - Libannocheck: Add libannocheck.pc pkgconfig file.
  - Libannocheck: Add libannocheck_reinit().
  - GCC Plugin: Record -ftrivial-auto-var-init and -fzero-call-used-regs.
  - Annocheck: Add future tests for  -ftrivial-auto-var-init and -fzero-call-used-regs.
  - Clang Plugin: Fix for building with Clang-15.  (#2125875)
  - Annocheck: Add a test for the inconsistent use of -Ofast.  (#1248744)
  - Plugin: Fix top level configuration support for RiscV.
  - Annocheck: Improvements to the size tool.
  - Annocheck: Fixes for libannocheck.h.
  - Annocheck: Add automatic profile selection.
  - Annocheck: Improve gap detection and reporting.
  - Annocheck: Check build-id of separate debuginfo files.
  - Annocheck: Add GAPS test replacing --ignore-gaps.
  - Annocheck: Fix covscan detected race condition between stat() and open().
  - Annocheck: Handle binaries created by Rust 1.18.  (#2094420)
  - Annocheck: Add optional function name to --skip arguments.  (PR 29229)
  - Annocheck: Fix handling of command line options that take arguments.  (#2086850)
  - Annocheck: Do not complain about unenabled -mbranch-protection option in AArch64 binaries.  (#2078909)
  - gcc-plugin: Fix typo in configure.ac.
  - Add support for RISC-V.
  - Annocheck: Add another special case for glibc rpms.  (#2083070)
  - Annocheck: Do not complain about unenabled -mbranch-protection option in AArch64 binaries if compiled using LTO.  (#2082146)
  - Annocheck: Add more glibc exceptions + check PT_TLS segments.  (#2081131)


author: Joe Orton <jorton@redhat.com> 0.9.3-7
changelog:
  - use AI_ADDRCONFIG in getaddrinfo() support (#73350)
  - include a working libtool script rather than relying on
   /usr/bin/libtool (#97695)


author: Joe Orton <jorton@redhat.com> 0.9.4-6
changelog:
  - define apr_off_t as int/long/... to prevent it changing
    with _FILE_OFFSET_BITS on 32-bit platforms


author: Joe Orton <jorton@redhat.com> 0.9.4-10
changelog:
  - fix configure check for mmap of /dev/zero
  - just put -D_GNU_SOURCE in CPPFLAGS not _{BSD,SVID,XOPEN}_SOURCE


author: Joe Orton <jorton@redhat.com> 0.9.4-13
changelog:
  - entirely remove 2Gb file size limit from apr_file_copy();
    fixes "svnadmin hotcopy" on repos with >2Gb strings table
  - work around getnameinfo bugs with v4-mapped addresses
  - fix apr_time_exp_get() for dates in 2038 (Philip Martin)


author: Joe Orton <jorton@redhat.com> 0.9.4-14
changelog:
  - enable posixsem and process-shared pthread mutex support, but
    ensure that sysvsem remains the default mechanism


author: Joe Orton <jorton@redhat.com> 0.9.4-15
changelog:
  - add support for setuid/setgid/sticky bits (André Malo)
  - add apr_threadattr_{guardsize,stacksize}_set() (latter by Jeff Trawick)


author: Joe Orton <jorton@redhat.com> 0.9.4-22
changelog:
  - backport fixes from HEAD:
   * correct implementation of nested mutexes
   * support for POSIX semaphores on LP64 platforms


author: Joe Orton <jorton@redhat.com> 0.9.6-5
changelog:
  - add from 0.9.x branch:
   * fix for apr_{uid,gid}_* error handling (r239592)
   * fix for apr_file_ write flushing (r267192)
  - add backport for use of readdir64_r (r265032, r265681, r265684)


author: Joe Orton <jorton@redhat.com> 0.9.6-6
changelog:
  - don't override CFLAGS at build time
  - allow setting TCP_NODELAY and TCP_CORK concurrently
  - use _exit() not exit() in child if exec*() fails (upstream #30913)


author: Joe Orton <jorton@redhat.com> 1.2.2-2
changelog:
  - avoid linking against -lrt
  - don't print -L${libdir} in --libs output
  - don't export -lcrypt/-luuid in .la file


author: Joe Orton <jorton@redhat.com> 1.2.8-6
changelog:
  - merge review (#225253): drop .a archive; drop use of CC/CXX,
    use BuildRequires; drop old Conflicts; URL reference for Source


author: Bojan Smojver <bojan@rexursive.com> 1.2.12-1
changelog:
  - bump up to 1.2.12
  - add dist
  - remove a comment from apr-1.2.7-psprintfpi.patch (applied upstream)


author: Joe Orton <jorton@redhat.com> - 1.4.2-3
changelog:
  - work around alising issue in ring macros (upstream PR 50190)
  - fix buildconf with newer libtool (#670621)


author: Joe Orton <jorton@redhat.com> 0.9.3-3
changelog:
  - make devel package conflict with old subversion-devel
  - run the less crufty parts of the test suite


author: Joe Orton <jorton@redhat.com> 0.9.3-5
changelog:
  - fix to try linking against -ldb first (#90917)
  - depend on openldap, gdbm, db4, expat appropriately.


author: Joe Orton <jorton@redhat.com> 1.2.8-3
changelog:
  - build DBD drivers as DSOs (w/Bojan Smojver, #192922)
  - split out pgsql driver into -pgsql subpackage


author: Joe Orton <jorton@redhat.com> 1.2.8-9
changelog:
  - add rewrite of expat autoconf code (upstream r493791)
  - fix build for new glibc open()-as-macro
  - split out sqlite subpackage


author: Bojan Smojver <bojan@rexursive.com> 1.2.10-1
changelog:
  - bump up to 1.2.10
  - pick up newly checked in MySQL DBD driver directly from ASF
  - remove dbdopen patch (fixed upstream)
  - remove xmlns patch (fixed upstream)
  - remove autoexpat patch (fixed upstream)


author: Bojan Smojver <bojan@rexursive.com> - 1.2.12-1
changelog:
  - bump up to 1.2.12
  - drop MySQL DBD driver, shipped upstream
  - adjust various patches to apply
  - rework tests in %check (1.2.x got tests from trunk)


author: Bojan Smojver <bojan@rexursive.com> - 1.3.2-3
changelog:
  - revert build dependencies, change from -2 didn't help
  - add apr-util-1.3.2-pgsql.patch (remove pgsql_LIBS during detection)


author: Joe Orton <jorton@redhat.com> - 1.6.0-1
changelog:
  - update to 1.6.0 (#1460831)
  - move bdb support to loadable DSO in apr-util-dbd subpackage
  - drop NSS, freetds support


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [aspell-.27.2-2]
  - Changes from .27.1 to .27.2 (Mar 1, 1999)
  - Fixed a major bug that caused aspell to dump core when used
    without any arguments
  - Fixed another major bug that caused aspell to do nothing when used
    in interactive mode.
  - Added an option to exit in Aspell's interactive mode.
  - Removed some old documentation files from the distribution.
  - Minor changes on to the section on using Aspell with egcs.
  - Minor changes to remove -Wall warnings.


author: Tim Powers <timp@redhat.com>
changelog:
  - built for Powertools 6.1
  - removed serial macro definitions from spec file to make versioning
    consistant with the other packages we ship.
  - changed build root path
  - general spec file cleanups


author: Tim Powers <timp@redhat.com>
changelog:
  - updated to .30.1
  - used build fixes from Ryan Weaver's 0.30.1-1 package on sourceforge
  - updated URL, download/ftp location
  - removed redundant define's at top of spec file


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - (this entry includes some old ones...)
  - update to .31
  - added patch to make it compile with a pickier compiler
  - include /usr/share/pspell


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - update to .31.1. My patch was upstreamed and is no longer needed.
  - new patch added so DESTDIR works properly


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - patch to work around compiler bug(?) wrt. inline functions
  - use CFLAGS and CXXFLAGS
  - set them to -O0 to work around YACB
  - copy libtool files for IA64 support


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - .32
  - remove old patches, add a patch since namespace isn't 
    polluted as much anymore (as opposed to older toolchain)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - remember to obsolete ispell
  - build the Canadian and British dictionaries here now,
    as part of the main package. Same package names and 
    descriptions.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - .32.1 bugfix release, obsolete old patch
  - rename to 0.32.1
  - add patch from author to change his email address
  - add spell and ispell compatibility scripts


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - .32.5 bugfix release (also contains improved documentation),
    obsolete old patch
  - the compatibility scripts are now part of the package itself
  - clean up build procedure
  - remove manual.aux file from docs (#16424)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.33.7-1
changelog:
  - 0.33.7 bugfix release. Requested by the author, it fixes
    coredumps in sug-mode and when not using typo-analyses.
    It also contains code cleanups so it compiles with -ansi
  - should fix coredump on IA64 (#49746)


author: Tim Powers <timp@redhat.com>
changelog:
  - fix broken pspell epoch dep
  - create $RPM_BUILD_ROOT/usr/bin by hand
  - remove /usr/doc
  - fix hardcoding of /usr/lib so that we can build on x86_64


author: Adrian Havill <havill@redhat.com> 12:0.50.50.3-18
changelog:
  - make rpm own some unclaimed dirs (#112984, #113778)
  - explicitly claim kbd anbd dat files in /usr/share/aspell
  - a little spec file files cleanup-- macro subs, dir prefix
  - make /usr/lib/aspell; don't make the dictionary packages do it


author: Ivana Varekova <varekova@redhat.com> 12:0.60.3-1
changelog:
  - update to 0.60.3 - (bug 141968) thanks to Dawid Gajownik 
  - add BuildRequires: ncurses-devel, gettext 
  - add config script patch (thanks tmraz@redhat.com)


author: Ivana Hutarova Varekova <varekova@redhat.com> - 12:0.60.6-8
changelog:
  - change summary name
    remove outdated Obsoletes, Conflicts and Provides flag
    fix requirement to install-info (pre -> post)
    move aspell-import to documentation part
    remove exit 0 from scriptlets


author: Matthias Clasen <mclasen@redhat.com> - 0.3.3-1
changelog:
  - Update to 0.3.3
  - Include gtk3 module
  - Drop gtk deps, since we don't want to depend on both gtk2 and gtk3;
    instead own the directories


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Version 0.7
  - add explicit check for required glib2 version before we do the build,
    so we don't end up with bad RPMs on --nodeps builds


author: Colin Walters <walters@verbum.org> - 1.30.0-6
changelog:
  - introspection: Add patch to export pkg-config file; necessary
    for dependent packages to build with introspection.


author: Kalev Lember <kalev@smartlink.ee> - 2.21.1-2
changelog:
  - added missing Conflicts: gtkmm24-devel to -devel subpackage
  - calculate two-digit download directory from three-digit package version


author: Kalev Lember <kalev@smartlink.ee> - 2.22.2-4
changelog:
  - Spec cleanup
  - Actually co-own /usr/share/devhelp/ directory
  - Require base package from -doc subpackage


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-1
changelog:
  - Initial build. Imported SPEC from Rawhide.
  - Removed 'Obsoletes: libopts ...' and introduced libopts subpackages to avoid
    mulitple licensing scenario.


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-2
changelog:
  - Prefixed libopts and libopts-devel with autogen-.
  - Removed 'BuildRequires: /usr/sbin/alternatives' and use of alternatives.
  - Added Provides & Obsoletes pair in autogen-libopts-devel according to
    Fedora naming guidelines.


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-3
changelog:
  - Added 'Obsoletes: autogen-manuals ...'.
  - Changed dual licensing of autogen-libopts-devel by dropping BSD.
  - Defined undefined non-weak symbols.
  - Omitted unused direct shared library dependencies.
  - Removed rpath setting bits from pkgconfig file.
  - Miscellaneous fixes.


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-4
changelog:
  - Changed dual licensing of autogen-libopts by dropping BSD.
  - Fixed multilib conflicts, static libraries and removed rpath setting bits
    from autoopts-config.
  - Replaced 'BuildRequires: chrpath' with 'BuildRequires: libtool' for removing
    rpaths.


author: Miroslav Lichvar <mlichvar@redhat.com> - 5.18-1
changelog:
  - Update to 5.18
  - Fix multilib conflicts (#831379)
  - Make some dependencies arch-specific
  - Remove obsolete macros


author: Miroslav Lichvar <mlichvar@redhat.com> - 5.18.3-1
changelog:
  - Update to 5.18.3
  - Compile with -Wno-format-contains-nul
  - Use fully versioned dependency on base package


author: Miroslav Lichvar <mlichvar@redhat.com> - 5.18.12-7
changelog:
  - fix linking to use hardening flags (#1547522)
  - use macro for ldconfig scriptlets
  - add gcc to build requirements
  - remove comment with macro


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:0.31.1-0.fdr.2
changelog:
  - Added new BuildReq pstoedit-devel.
  - Added missing BuildReq libexif-devel.
  - Added missing -devel requires pkgconfig, ImageMagick-devel.
  - Converted spec file to UTF-8.


author: Peter Lemenkov <lemenkov@gmail.com> - 0.31.1-23
changelog:
  - Removed static libraries from -devel
  - Changed %makeinstall to "make install DESTDIR=blablabla"
  - Fixed rhbz# 477980


author: Jaroslav Škarvada <jskarvad@redhat.com> - 0.31.1-43
changelog:
  - Enabled pstoedit backend
  - Fixed out of bounds write when using pstoedit backend
    Resolves: CVE-2016-7392
  - Fixed hardcoded version on source URL
  - Fixed bogus date in changelog (best effort)


author: Parag Nemade <pnemade AT redhat DOT com> - 0.31.1-53
changelog:
  - Resolves: CVE-2019-19004 : integer overflow in input-bmp.c
  - Resolves: CVE-2019-19005 : fix bitmap double free in main.c


author: Parag Nemade <pnemade AT redhat DOT com> - 0.31.1-55
changelog:
  - Resolves: rhbz#2121827 Fix the gating tests by using only local test
    Upstream testsuite will not work as this package code is very old


author: Nils Philippsen <nils@redhat.com> - 0.1.2-2
changelog:
  - split off devel-docs subpackage to make package multi-lib compliant (#477807)
  - let devel package require correct arch of base package


author: Nils Philippsen <nils@tiptoe.de> - 0.1.72-2
changelog:
  - BR: librsvg2-tools for rsvg-convert
  - mark license files as %license
  - use %apiver macro consistently
  - don't ship .gitignore file


author: Simone Caronni <negativo17@gmail.com> - 9.4.1-2
changelog:
  - Add Debian patch to enable/disable S3 support at configure time.
  - Disable S3 as it does not currently build:
    http://bugs.bacula.org/view.php?id=2446
  - Update RPM macros.


author: Simone Caronni <negativo17@gmail.com> - 9.4.1-3
changelog:
  - Build QT programs with QT 5 on RHEL/CentOS 7. Also, reduce the number of
    required QT packages for building.


author: Simone Caronni <negativo17@gmail.com> - 9.6.7-1
changelog:
  - Update to 9.6.7.
  - Drop support for building on CentOS/RHEL 6 and upgrades from version 2.4.
  - Trim changelog.


author: Pavel Cahyna <pcahyna@redhat.com> - 11.0.1-5
changelog:
  - Make nagios-plugin build conditional and disabled on RHEL to avoid
    generating this subpackage that has missing dependencies
  - Fix flags for annobin in Qt tools (bat & tray-monitor) build
  - Add a forgotten RHEL 8 patch to use openssl crypto (random numbers, hmac,
    hashing functions)
    Resolves: rhbz#1935458


author: Rui Matos <rmatos@redhat.com> - 3.3.3-1
changelog:
  - Update to 3.3.3
  - Just list %{_datadir}/help/xx_YY/baobab in %files since %find_lang
    doesn't find those for us


author: David King <amigadave@amigadave.com> - 3.15.90-1
changelog:
  - Update to 3.15.90
  - Use license macro for COPYING and COPYING.docs
  - Use pkgconfig for BuildRequires
  - Update URL
  - Validate AppData in check
  - Update man page glob in files section


author: Rafael Fonseca <rdossant@redhat.com> - 0.4.0-1
changelog:
  - Resolves #1460482 - rebase to new release
  - Resolves #1505506 - add support for LLVM 5.0
  - Resolves #1460482 - BPF module compilation issue
  - Partially address #1479990 - location of man pages
  - Enable ppc64(le) support without lua
  - Soname versioning for libbpf by ignatenkobrain


author: Jerome Marchand <jmarchan@redhat.com> - 0.6.0-6
changelog:
  - llcstat: print a nicer error message on virtual machine
  - Add NSS support to sslsniff
  - Fixes miscellaneous error uncovered by covscan


author: Jerome Marchand <jmarchan@redhat.com> - 0.8.0-1
changelog:
  - Rebase on bcc-8.0.0
  - Replace the temporary s390x workaround by a proper fix
  - Remove the doc of excluded tool from the package
  - Fix print_log2_hist
  - Fix yet a few other python3 bytes vs strings issues


author: Jerome Marchand <jmarchan@redhat.com> - 0.10.0-1
changelog:
  - Rebase to bcc-0.10.0
  - Drop criticalstat
  - Fix regression on vfscount and runqslower
  - Rebuild on LLVM 9


author: Jerome Marchand <jmarchan@redhat.com> - 0.14.0-2
changelog:
  - Remove criticalstat manpage
  - Remove compactsnoop on non x86_64
  - Suggest to use --binary in deadlock
  - Remove non-existent argument from tcpconnect man page
  - Suggest to install the proper kernel-devel version
  - Fix dbstat and dbslower


author: Scott Lampert <fortunato@heavymetal.org>
changelog:
  - Used buildroot
  - patched bin/named/ns_udp.c to use <libelf/nlist.h> for include
    on Redhat 5.0 instead of <nlist.h>


author: Manuel J. Galan <manolow@step.es>
changelog:
  - Several essential modifications to build and install correctly.
  - Modified 'ndc' to avoid deprecated use of '-'


author: Stepan Kasal <kasal@math.cas.cz>
changelog:
  - nslookup patched:
    to count numRecords properly
    to fix subsequent calls to ls -d
    to parse "view" and "finger" commands properly
    the view hack updated for bind-8 (using sed)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 8.2.1.
  - add named.logrotate (#3571).
  - hack around egcs-1.1.2 -m486 bug (#3413, #3485).
  - vet file list.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - use real stop and start in named.init for restart, not ndc restart, it has
    problems when named has changed during a package update... (# 4890)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix up location of named-bootconf.pl and make it executable
    (Bug #8028)
  - bind-devel requires bind


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - provide /var/named (fix for bugs #9847, #10205)
  - preserve args when restarted via ndc(8) (bug #10227)
  - make resolv.conf(5) a link to resolver(5) (bug #10245)
  - fix SYSTYPE bug in all makefiles
  - move creation of named user from %post into %pre


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - modify logrotate setup to use PID file
  - temporarily disable optimization by unsetting $RPM_OPT_FLAGS at build-time
  - actually bump the release this time


author: Bernhard Rosenkranzer <bero@redhat.com>
changelog:
  - Fix up the initscript (Bug #13033)
  - Fix build with current glibc (Bug #12755)
  - /etc/rc.d/init.d -> /etc/init.d
  - use %{_mandir} rather than /usr/share/man


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fixed logrotate script (wrong path to kill)
  - include header files in -devel package
  - bugzilla #22049, #19147, 21606


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Move run files to /var/run/named/ - /var/run isn't writable
    by the user we're running as. (Bug #20665)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Make /etc/rndc.conf and /etc/sysconfig/named noreplace
  - Make devel require bind = %{version} rather than just bind


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to 9.1.1rc1; fixes 17 bugs (14 of them affecting us;
    1 was fixed in a Red Hat patch already, 2 others are portability
    improvements)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 9.1.1 probably won't be out in time, revert to 9.1.0 and apply fixes
    from 9.1.1rc2
  - bind requires bind-utils (#28317)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Don't use the standard rndc key from the documentation, instead, create a random one
    at installation time (#26358)
  - Make /etc/rndc.conf readable by user named only, it contains secret keys


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.0-9
changelog:
  - Work around bind 8 -> bind 9 migration problem when using buggy zone files:
    accept zones without a TTL, but spew out a big fat warning. (#31393)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.2-1
changelog:
  - 9.1.2 final. No changes between 9.1.2-0.rc1.1 and this one, except for
    the version number, though.


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-0.rc1.2
changelog:
  - Add named.conf man page from bind 8.x (outdated, but better than nothing,
    - Rename the rndc key (#42895)
  - Add dnssec* man pages


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-3
changelog:
  - Add build dependencies (#49368)
  - Make sure running service named start several times doesn't create
    useless processes (#47596)
  - Work around the named parent process returning 0 even if the config
    file is broken (it's parsed later by the child processes) (#45484)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-4
changelog:
  - Make sure /etc/rndc.conf isn't world-readable even after the
    %post script inserted a random key (#53009)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.0-0.rc3.1
changelog:
  - 9.2.0rc3
  - remove ttl patch, I don't think we need this for 8.0.
  - remove dig.1.bz2 from the bind8-manpages tar file, 9.2 has a new dig man page
  - add lwres* man pages to -devel


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.0-7
changelog:
  - Don't exit if /etc/named.conf doesn't exist if we're running
    chroot (#60868)
  - Revert Elliot's changes, we do require specific glibc/glibc-kernheaders
    versions or bug #58335 will be back. "It compiles, therefore it works"
    isn't always true.


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.1-2
changelog:
  - Move libisccc, lib isccfg and liblwres from bind-utils to bind,
    they're not required if you aren't running a nameserver.


author: Karsten Hopp <karsten@redhat.de> 9.2.1-7
changelog:
  - fix name of pidfine in logrotate script (#68842)
  - fix owner of logfile in logrotate script (#41391)
  - fix nslookup and named.conf man pages (output on stderr)
    (#63553, #63560, #63561, #54889, #57457)
  - add rfc1912 (#50005)
  - gzip all rfc's
  - fix typo in keygen.c (#54870)
  - added missing manpages (#64065)
  - shutdown named properly with rndc stop (#62492)
  - /sbin/nologin instead of /bin/false (#68607)
  - move nsupdate to bind-utils (where the manpage already was) (#66209, #66381)
  - don't kill initscript when rndc fails (reload)    (#58750)


author: Daniel Walsh <dwalsh@redhat.com> 9.2.1-12
changelog:
  - Fix log rotate to use service named reload
  - Change service named reload to give success/failure message [73770]
  - Fix File checking [75710]
  - Begin change to automatically run in CHROOT environment


author: Daniel Walsh <dwalsh@redhat.com> 9.2.2-13
changelog:
  - Fix config description of named.conf in chroot
  - Change named.init script to check for existence of /etc/sysconfig/network


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Fixed named.init generation of error messages on
  - 'service named stop' and 'service named reload'
  - as per bug 127775


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Fixed bug 129289: bind-chroot install / deinstall
  - on install, existing config files 'safe_replace'd
  - with links to chroot copies; on uninstall, moved back.


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Remove resolver(5) manpage now in man-pages (bug 130792);
  - Don't create /dev/ entries in bind-chroot if already there (bug 127556);
  - fix bind-devel Requires (bug 130919)
  - Set default location for dumpdb & stats files to /var/named/data


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Fix bug 130981: add '-t' option to named-checkconf invocation in
  - named.init if chroot installed.


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc7-10
changelog:
  - Fix bug 130121: add '%ghost' entries for files included in previous
  - bind-chroot & not in current - ie. named.conf, rndc.key, dev/* -
  - that RPM removed after upgrade .


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc7-11_EL3
changelog:
  - Fix bug 131803: replace ROOTDIR line removed by broken
  - bind-chroot 9.2.2-21's '%postun'; added %triggerpostun for bind-chroot


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc7-12_EL3
changelog:
  - Fix bug 132303: if ROOTDIR line was replaced after upgrade from
  - bind-chroot-9.2.2-21, restart named


author: Jason Vas Dias <jvdias@redhat.com> - 10:9.2.4rc8-14
changelog:
  - Upgrade to upstream bind-9.2.4rc8 .
  - Progress: Finally! Hooray! ISC bind now distributes:
  - o named.conf(5) and nslookup(8) manpages
  -    'bind-manpages.bz2' source can now disappear
  -    (could this have something to do with ISC bug I raised about this?)
  - o 'deprecation_msg' global has vanished
  -     bind-9.2.3rc3-deprecation_msg_shut_up.diff.bz2 can disappear


author: Jason Vas Dias <jvdias@redhat.com> - 20:9.2.4-1
changelog:
  - BIND 9.2.4 (final release) released - source code actually
  - identical to 9.2.4rc8, with only version number change.


author: Jason Vas Dias <jvdias@redhat.com> - 20:9.2.4-2
changelog:
  - Fix bug 136243: bind-chroot %post must run restorecon -R %{prefix}
  - Fix bug 135175: named.init must return non-zero if named is not run
  - Fix bug 134060: bind-chroot %post must use mktemp, not /tmp/named
  - Fix bug 133423: bind-chroot %files entries should have been %dirs


author: Jason Vas Dias <jvdias@redhat.com> - 20:9.2.4-4
changelog:
  - Fix bugs 140528 and 141113:
  - 2 second timeouts when IPv6 not configured and root nameserver's
  - AAAA addresses are queried


author: Jason Vas Dias <jvdias@redhat.com> - 22:9.3.0-2
changelog:
  - Fix bug 143438: named.init will now make correct ownership of $ROOTDIR/var/named
  -                 based on 'named_write_master_zones' SELinux boolean.
  - Fix bug 143744: dig & nsupdate IPv6 timeout  (dup of 140528)


author: Jason Vas Dias <jvdias@redhat.com> - 22:9.3.1rc1-1
changelog:
  - Upgrade to 9.3.1rc1
  - Add Simplified Database Backend (SDB) sub-package ( bind-sdb )
  -     add named_sdb - ldap + pgsql + dir database backend support with
  -     'ENABLE_SDB' named.sysconfig option
  - Add BIND resolver library & includes sub-package ( libbind-devel)
  - fix bug 147824 / 147073 / 145664: ENABLE_ZONE_WRITE in named.init
  - fix bug 146084 : shutup restorecon


author: Jason Vas Dias <jvdias@redhat.com> - 22.9.3.1rc1-5
changelog:
  - fix bug 150288: h_errno not being accessed / set correctly in libbind
  - add libbind man-pages from bind-8.4.6


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-2_FC4
changelog:
  - Rebuild for bind-sdb libpq.so.3 dependency
  - fix bug 150981: don't install libbind man-pages if no libbind
  - fix bug 151852: mount proc on $ROOTDIR/proc to allow sysconf(...)
    to work and correct number of CPUs to be determined


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-4_dbus
changelog:
  - Enhancement to allow dynamic forwarder table management and
  - DHCP forwarder auto-configuration with D-BUS


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-4
changelog:
  - Fix bug 157601: give named.init a configtest function
  - Fix bug 156797: named.init should check SELinux booleans.local before booleans
  - Fix bug 154335: if no controls in named.conf, stop named with -TERM sig, not rndc
  - Fix bug 155848: add NOTES section to named.8 man-page with info on all Red Hat
                    BIND quirks and SELinux DDNS / slave zone file configuration
  - D-BUS patches NOT applied until dhcdbd is in FC


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-6
changelog:
  - fix bug 157950: dig / host / nslookup should reject invalid resolv.conf
                    files and not use uninitialized garbage nameserver values
                    (ISC bug 14841 raised).


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-7
changelog:
  - fix bug 160914: resolver utilities should try next server on empty referral
                    (now that glibc bug 162625 is fixed)
                    host and nslookup now by default try next server on SERVFAIL
                    (host now has '-s' option to disable, and nslookup given
                     '[no]fail' option similar to dig's [no]fail option).
  - rebuild and re-test with new glibc & gcc (all tests passed).


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-10
changelog:
  - Build with D-BUS patch by default; D-BUS support enabled with named -D option
  - Enable D-BUS for named_sdb also
  - fix sdb pgsql's zonetodb.c: must use isc_hash_create() before dns_db_create()
  - update fix for bug 160914 : test for RD=1 and ARCOUNT=0 also before trying next server
  - fix named.init script to handle named_sdb properly
  - fix named.init script checkconfig() to handle named '-c' option
    and make configtest, test, check configcheck synonyms


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-12
changelog:
  - fix bug 168302: use %{__cc} for compiling dns-keygen
  - fix bug 167682: bind-chroot directory permissions
  - fix issues with -D dbus option when dbus service not running or disabled


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-18
changelog:
  - fix bug 169969: do NOT call dbus_svc_dispatch() in dbus_mgr_init_dbus() -
        task->state != task_ready and will cause Abort in task.c if process
        is waiting for NameOwnerChanged to do a SetForwarders


author: Jason Vas Dias <jvdias@redhat.com> - 24.9.3.1-20
changelog:
  - Allow the -D enable D-BUS option to be used within bind-chroot .
  - fix bug 171226: supply some documentation for pgsql SDB .


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-22
changelog:
  - fix bug 172632 - remove .la files
  - ship namedGetForwarders and namedSetForwarders scripts
  - fix detection of -D option in chroot


author: Jason Vas Dias <jvdias@redhat.com> - 24:9.3.1-24
changelog:
  - allow D-BUS support to work in bind-chroot environment:
    workaround latest selinux policy by mounting /var/run/dbus/
    under chroot instead of /var/run/dbus/system-bus-socket


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-4
changelog:
  - regenerate redhat_doc patch for non-DBUS builds
  - allow dbus builds to work with dbus version < 0.6 (bz #179816)


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-6
changelog:
  - replace caching-nameserver with bind-config sub-package
  - fix bug 177595: handle case where $ROOTDIR is a link in initscript
  - fix bug 177001: bind-config creates symlinks OK now
  - fix bug 176388: named.conf is now never replaced by any RPM
  - fix bug 176248: remove unecessary creation of rpmsave links
  - fix bug 174925: no replacement of named.conf
  - fix bug 173963: existing named.conf never modified
  - major .spec file cleanup


author: Jason Vas Dias <jvdias@redhat.com> - 30.9.3.2-8
changelog:
  - Do not allow package to be installed if named:25 userid creation fails
  - Give libbind a pkg-config file
  - remove restorecon from bind-chroot-admin (not required).
  - fix named.caching-nameserver.conf (listen-on-v6 port 53 { ::1 };)


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-14
changelog:
  - fix bug 186577: remove -L/usr/lib from libbind.pc and more .spec file cleanup
  - add '%doc' sample configuration files in /usr/share/doc/bind*/sample
  - rebuild with new gcc and glibc


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-16
changelog:
  - fix bug 187286: 
       prevent host(1) printing duplicate 'is an alias for' messages
       for the default AAAA and MX lookups as well as for the A lookup
       (it now uses the CNAME returned for the A lookup for the AAAA and MX lookups).
       This is upstream bug #15702 fixed in the unreleased bind-9.3.3
  - fix bug 187333: fix SOURCE24 and SOURCE25 transposition


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-20
changelog:
  - fix resolver.c ncache_adderesult segfault reported in addenda to bug 173961 
    (upstream bugs #15642, #15528 ?)
  - allow named ability to generate core dumps after setuid (upstream bug #15753)


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-22
changelog:
  - apply upstream patch for ncache_adderesult segfault bug 173961 addenda
  - fix bug 188382: rpm --verify permissions inconsistencies
  - fix bug 189186: use /sbin/service instead of initscript
  - rebuild for new gcc, glibc-kernheaders


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-26.FC6
changelog:
  - fix bugs 191093, 189789
  - backport selected fixes from upstream bind9 'v9_3_3b1' CVS version:
    ( see http://www.isc.org/sw/bind9.3.php "Fixes" ): 
    o change 2024 / bug 16027:
      named emitted spurious "zone serial unchanged" messages on reload
    o change 2013 / bug 15941:
      handle unexpected TSIGs on unsigned AXFR/IXFR responses more gracefully
    o change 2009 / bug 15808: coverity fixes
    o change 1997 / bug 15818: 
      named was failing to replace negative cache entries when a positive one
      for the type was learnt
    o change 1994 / bug 15694: OpenSSL 0.9.8 support
    o change 1991 / bug 15813:
      The configuration data, once read, should be treated as readonly.
    o misc. validator fixes 
    o misc. resolver fixes
    o misc. dns fixes
    o misc. isc fixes
    o misc. libbind fixes
    o misc. isccfg fix
    o misc. lwres fix
    o misc. named fixes
    o misc. dig fixes
    o misc. nsupdate fix
    o misc. tests fixes


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-30
changelog:
  - fix bug 196398 - Enable -D option automatically in initscript
    if NetworkManager enabled in any runlevel.
  - fix namedGetForwarders for new dbus
  - fix bug 195881 - libbind.so should be owned by bind-libbind-devel


author: Jason Vas Dias <jvdias@redhat.com> - 30:9.3.2-32
changelog:
  - fix addenda to bug 189789: 
    determination of selinux enabled was still not 100% correct in bind-chroot-admin
  - fix addenda to bug 196398:
    make named.init test for NetworkManager being enabled AFTER testing for -D absence;
    named.init now supports a 'DISABLE_NAMED_DBUS' /etc/sysconfig/named setting to disable
    auto-enable of named dbus support if NetworkManager enabled.


author: Martin Stransky <stransky@redhat.com> - 30:9.3.2-37
changelog:
  - fix for #202542 - /usr/sbin/bind-chroot-admin: No such file or directory
  - fix for #202547 - file_contexts: invalid context


author: Martin Stransky <stransky@redhat.com> - 30:9.3.3-3
changelog:
  - added fix from #209400 - Bind Init Script does not create 
    the PID file always, created by Jeff Means
  - added timeout to stop section of init script. 
    The default is 100 sec. and can be adjusted by NAMED_SHUTDOWN_TIMEOUT
    shell variable.


author: Martin Stransky <stransky@redhat.com> - 30:9.3.3-6
changelog:
  - fix for #200465: named-checkzone and co. cannot be run as non-root user
  - fix for #212348: chroot'd named causes df permission denied error
  - fix for #211249, #211083 - problems with stopping named
  - fix for #212549: init script does not unmount /proc filesystem
  - fix for #211282: EDNS is globally enabled, crashing CheckPoint FW-1,
      added edns-enable options to named configuration file which can suppress
      EDNS in queries to DNS servers (see /usr/share/doc/bind-9.3.3/misc/options)
  - fix for #212961: bind-chroot doesn't clean up its mess on %preun
  - update to 9.3.3rc3, removed already merged patches


author: Martin Stransky <stransky@redhat.com> - 31:9.3.3-0.1.rc3
changelog:
  - added back an interval to restart
  - renamed package, it should meet the N-V-R criteria
  - fix for #216185: bind-chroot-admin able to change root mode 750
  - added fix from #215997: incorrect permissions on dnszone.schema
  - added a notice to init script when /etc/named.conf doesn't exist (#216075)


author: Martin Stransky <stransky@redhat.com> - 31:9.3.3-2
changelog:
  - added namedGetForwarders written in shell (#176100),
    created by Baris Cicek <baris@nerd.com.tr>.


author: Adam Tkac <atkac@redhat.com> 31:9.3.3-4.fc7
changelog:
  - package bind-libbind-devel has beed removed (libs has been moved to bind-devel & bind-libs)
  - Resolves: #214208


author: Adam Tkac <atkac@redhat.com> 31:9.3.4-3.fc7
changelog:
  - fixed building without libbind
  - fixed post section (selinux commands is now in if-endif statement)
  - prever macro has been removed from version


author: Adam Tkac <atkac@redhat.com> 31:9.4.0-1.fc7
changelog:
  - updated to 9.4.0
  - bind-chroot-admin now sets EAs correctly (#213926)
  - throw away next_server_on_referral and no_servfail_stops patches (fixed in 9.4.0)


author: Adam Tkac <atkac redhat com> 31:9.4.0-2.fc7
changelog:
  - added experimental SQLite support (written by John Boyd <jaboydjr@netwalk.com>)
  - moved bind-chroot-admin script to chroot package
  - bind-9.3.2-redhat_doc.patch is always applied (#231738)


author: Adam Tkac <atkac redhat com> 31:9.4.0-3.fc7
changelog:
  - prepared bind to merge review
  - added experimental idn support to bind-utils utils (not enabled by default yet)
  - change chroot policy in caching-nameserver post section
  - fixed bug in bind-chroot-admin - rootdir function is called properly now


author: Adam Tkac <atkac redhat com> 31:9.4.0-4.fc7
changelog:
  - removed query-source[-v6] options from caching-nameserver config
    (#209954, increase security)
  - throw away idn. It won't be ready in fc7


author: Adam Tkac <atkac redhat com> 31:9.4.0-7.fc7
changelog:
  - removed DEBUGINFO option because with this option (default) was bind
    builded with -O0 and without this flag no debuginfo package was produced.
    (I want faster bind => -O2 + debuginfo)
  - fixed zone finding (#236426)


author: Adam Tkac <atkac redhat com> 31:9.4.0-8.fc7
changelog:
  - improved "zone freeze patch" - if multiple zone with same name exists
    no zone is freezed
  - minor cleanup in caching-nameserver's config file
  - fixed race-condition in dbus code (#235809)
  - added forgotten restorecon statement in bind-chroot-admin


author: Adam Tkac <atkac redhat com> 31:9.4.1-3
changelog:
  - fixed bind-chroot-admin dynamic DNS handling (#239149)
  - updated zone-freeze patch to latest upstream
  - ldap sdb has been rewriten to latest api (#239802)


author: Adam Tkac <atkac redhat com> 31:9.4.1-4
changelog:
  - removed ldap-api patch and start using deprecated API
  - fixed minor problem in bind-chroot-admin script (#241103)


author: Adam Tkac <atkac redhat com> 31:9.4.1-5
changelog:
  - very minor compatibility change in bind-chroot-admin (line 215)
  - enabled IDN support by default and don't distribute IDN libraries
  - specfile cleanup
  - add dynamic directory to /var/named. This directory will be primarily used for
    dynamic DNS zones. ENABLE_ZONE_WRITE and SELinux's named_write_master_zones no longer exist


author: Adam Tkac <atkac redhat com> 31:9.4.1-6
changelog:
  - major changes in initscript. Could be LSB compatible now
  - removed caching-nameserver subpackage. Move configs from this
    package to main bind package as default configuration and major
    configuration cleanup


author: Adam Tkac <atkac redhat com> 31:9.4.1-7
changelog:
  - marked caching-nameserver as obsolete (#244604)
  - fixed typo in initscript (causes that named doesn't detect NetworkManager
    correctly)
  - next cleanup in configuration - moved configfiles into config.tar
  - removed delay between start & stop in restart function in named.init


author: Adam Tkac <atkac redhat com> 31:9.5.0a5-2
changelog:
  - minor changes in default configuration
  - fix h_errno assigment during resolver initialization (unbounded recursion, #245857)
  - removed wrong patch to #150288


author: Adam Tkac <atkac redhat com> 31:9.5.0a5-3.9
changelog:
  - removed bind-sdb package (default named has compiled SDB backend now)
  - integrated DLZ (Dynamically loadable zones) drivers
  - integrated GSS-TSIG support (RFC 3645)
  - build with -O0 (many new features, potential core dumps will be more useful)


author: Adam Tkac <atkac redhat com> 31:9.5.0a5-5
changelog:
  - integrated "autotools" patch for testing purposes (upstream will
    accept it in future, for easier building)


author: Adam Tkac <atkac redhat com> 32:9.5.0-6.a6
changelog:
  - updated to 9.5.0a6 which contains fixes for CVE-2007-2925 and
    CVE-2007-2926
  - fixed building on 64bits


author: Adam Tkac <atkac redhat com> 32:9.5.0-8.a6
changelog:
  - minor next improvements on autotools patch
  - dig and host utilities now using libidn instead idnkit for
    IDN support


author: Adam Tkac <atkac redhat com> 32:9.5.0-9.a6
changelog:
  - disable 64bit dlz driver patch on alpha and ia64 (#251298)
  - remove wrong malloc functions from lib/dns/spnego.c (#251853)


author: Adam Tkac <atkac redhat com> 32:9.5.0-10.a6
changelog:
  - dropped direct dependency to /etc/openldap/schema directory
  - changed hardcoded paths to macros
  - fired away code which configure LDAP server


author: Adam Tkac <atkac redhat com> 32:9.5.0-10.2.a6
changelog:
  - added new initscript option KEYTAB_FILE which specified where
    is located kerberos .keytab file for named service
  - obsolete temporary bind-9.5-spnego-memory_management.patch by
    bind-9.5-gssapictx-free.patch which conforms BIND coding standards
    (#251853)


author: Adam Tkac <atkac redhat com> 32:9.5.0-11.a6
changelog:
  - start using --disable-isc-spnego configure option
    - remove bind-9.5-spnego-memory_management.patch (source isn't
      compiled)


author: Adam Tkac <atkac redhat com> 32:9.5.0-11.1.a6
changelog:
  - removed end dots from Summary sections (skasal@redhat.com)
  - fixed wrong file creation by autotools patch (skasal@redhat.com)


author: Adam Tkac <atkac redhat com> 32:9.5.0-11.3.a6
changelog:
  - initscript failure message is now printed correctly (#277981,
    Quentin Armitage (quentin armitage org uk) )


author: Adam Tkac <atkac redhat com> 32:9.5.0-12.a6
changelog:
  - bind-9.5-2119_revert.patch and bind-9.5-fix_h_errno.patch are
    obsoleted by upstream bind-9.5-_res_errno.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-16.5.a6
changelog:
  - added bind-sdb again, contains SDB modules and DLZ modules
  - bind-9.3.1rc1-sdb.patch replaced by bind-9.5-sdb.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-17.a7
changelog:
  - 9.5.0a7
  - dropped patches (upstream)
    - bind-9.5-update.patch
    - bind-9.5-pool_badfree.patch
    - bind-9.5-_res_errno.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-18.4.a7
changelog:
  - bind-9.5-random_ports.patch was removed because upstream doesn't
    like it. query-source{,v6} options are sufficient (#391931)
  - bind-chroot-admin called restorecon on /proc filesystem (#405281)


author: Adam Tkac <atkac redhat com> 32:9.5.0-23.b1
changelog:
  - fixed initscript wait loop (#426382)
  - removed dependency on policycoreutils and libselinux (#426515)


author: Adam Tkac <atkac redhat com> 32:9.5.0-24.b1
changelog:
  - removed bind-9.3.2-prctl_set_dumpable.patch (upstream)
  - allow parallel building of libdns library
  - CVE-2008-0122


author: Adam Tkac <atkac redhat com> 32:9.5.0-26.b2
changelog:
  - build with -D_GNU_SOURCE (#431734)
  - improved fix for #253537, posttrans script is now used
  - improved fix for #400461
  - 9.5.0b2
    - bind-9.3.2b1-PIE.patch replaced by bind-9.5-PIE.patch
      - only named, named-sdb and lwresd are PIE
    - bind-9.5-sdb.patch has been updated
    - bind-9.5-libidn.patch has been updated
    - bind-9.4.0-sdb-sqlite-bld.patch replaced by bind-9.5-sdb-sqlite-bld.patch
    - removed bind-9.5-gssapi-header.patch (upstream)
    - removed bind-9.5-CVE-2008-0122.patch (upstream)
  - removed bind-9.2.2-nsl.patch
  - improved sdb_tools Makefile.in


author: Adam Tkac <atkac redhat com> 32:9.5.0-27.b2
changelog:
  - removed conditional build with libefence (use -fmudflapth instead)
  - fixed building of DLZ stuff (#432497)
  - do not build Berkeley DB DLZ backend
  - temporary build with --disable-linux-caps and without threads (#433102)
  - update named.ca file to affect IPv6 changes in root zone


author: Adam Tkac <atkac redhat com> 32:9.5.0-30.b3
changelog:
  - 9.5.0b3 release
  - dropped patches (upstream)
    - bind-9.5-transfer-segv.patch
    - bind-9.5-mudflap.patch
    - bind-9.5.0-generate-xml.patch
    - bind-9.5-libcap.patch


author: Adam Tkac <atkac redhat com> 32:9.5.0-32.b3
changelog:
  - reverted "any" patch, upstream says not needed
  - log EDNS failure only when we really switch to plain EDNS (#275091)
  - detect configuration file better


author: Adam Tkac <atkac redhat com> 32:9.5.0-33.rc1
changelog:
  - updated to 9.5.0rc1
  - merged patches
    - bind-9.5-libcap.patch
  - make binaries readable by others (#427826)


author: Adam Tkac <atkac redhat com> 32:9.5.0-36.1
changelog:
  - removed dns-keygen utility in favour of rndc-confgen -a (#449287)
  - some minor sample fixes (#449274)


author: Adam Tkac <atkac redhat com> 32:9.5.1-0.1.b1
changelog:
  - 9.5.1b1 release (CVE-2008-1447)
  - dropped bind-9.5-recv-race.patch because upstream doesn't want it


author: Adam Tkac <atkac redhat com> 32:9.5.1-0.3.b1
changelog:
  - static libraries are no longer supported
  - IP acls weren't merged correctly (#457175)
  - use fPIE on sparcv9/sparc64 (Dennis Gilmore)
  - add sparc64 to list of 64bit arches in spec (Dennis Gilmore)


author: Adam Tkac <atkac redhat com> 32:9.5.1-0.7.b2
changelog:
  - 9.5.1b2 release
  - patches merged
    - bind95-rh454783.patch
    - bind-9.5-edns.patch
    - bind95-rh450995.patch
    - bind95-rh457175.patch


author: Adam Tkac <atkac redhat com> 32:9.6.0-0.1.b1
changelog:
  - 9.6.0b1 release
  - don't build ODBC and Berkeley DB DLZ drivers
  - end of bind-chroot-admin script, copy config files to chroot manually
  - /proc doesn't have to be mounted to chroot
  - temporary use libbind from 9.5 series, noone has been released for 9.6 yet


author: Adam Tkac <atkac redhat com> 32:9.6.0-0.5.rc1
changelog:
  - 9.6.0rc1 release
  - patches merged
    - bind-9.2.0rc3-varrun.patch
    - bind-95-sdlz-include.patch
    - bind-96-libxml2.patch
  - fixed rare use-after-free problem in host utility (#452060)
  - enabled chase of DNSSEC signature chains in dig


author: Adam Tkac <atkac redhat com> 32:9.6.0-11.P1
changelog:
  - fall back to insecure mode when no supported DNSSEC algorithm is found
    instead of SERVFAIL
  - don't fall back to non-EDNS0 queries when DO bit is set


author: Adam Tkac <atkac redhat com> 32:9.6.1-0.1.b1
changelog:
  - 9.6.1b1 release
  - patches merged
    - bind-96-isc_header.patch
    - bind-95-rh469440.patch
    - bind-96-realloc.patch
    - bind9-fedora-0001.diff
  - use -version-number instead of -version-info libtool param


author: Martin Nagy <mnagy redhat com> 32:9.6.1-0.2.b1
changelog:
  - update the patch for dynamic loading of database backends
  - fix dns_db_unregister()
  - useradd now takes "-N" instead of "-n" (atkac, #495726)
  - print nicer error msg when zone file is actually a directory (atkac, #490837)


author: Martin Nagy <mnagy redhat com> 32:9.6.1-0.3.b1
changelog:
  - update the patch for dynamic loading of database backends
  - create %{_libdir}/bind directory
  - copy default named.conf to doc directory, shared with s-c-bind (atkac)


author: Adam Tkac <atkac redhat com> 32:9.6.1-1
changelog:
  - 9.6.1 release
  - simplify chroot maintenance. Important files and directories are mounted into
    chroot (see /etc/sysconfig/named for more info, #504596)
  - fix doc/named.conf.default perms


author: Adam Tkac <atkac redhat com> 32:9.6.1-2
changelog:
  - improved "chroot automount" patches (#504596)
  - host should fail if specified server doesn't respond (#507469)


author: Adam Tkac <atkac redhat com> 32:9.6.1-3
changelog:
  - fix broken symlinks in bind-libs (#509635)
  - fix typos in /etc/sysconfig/named (#509650)
  - add DEBUG option to /etc/sysconfig/named (#510283)


author: Adam Tkac <atkac redhat com> 32:9.6.1-9.P1
changelog:
  - next attempt to fix the postun trigger (#520385)
  - remove obsolete bind-9.3.1rc1-fix_libbind_includedir.patch


author: Adam Tkac <atkac redhat com> 32:9.7.0-0.2.a2
changelog:
  - improve chroot related documentation (#507795)
  - add NetworkManager dispatcher script to reload named when network interface is
    activated/deactivated (#490275)
  - don't set/unset named_write_master_zones SELinux boolean every time in
    initscript, modify it only when it's actually needed


author: Adam Tkac <atkac redhat com> 32:9.7.0-0.6.b1
changelog:
  - update to 9.7.0b1
  - add bind-pkcs11 subpackage to support PKCS11 compatible keystores for DNSSEC
    keys


author: Adam Tkac <atkac redhat com> 32:9.7.0-0.14.rc2
changelog:
  - obsolete dnssec-conf
  - automatically update configuration from old dnssec-conf based
  - improve default configuration; enable DLV by default
  - remove obsolete triggerpostun from bind-libs subpackage


author: Adam Tkac <atkac redhat com> 32:9.7.0-2
changelog:
  - improve automatic DNSSEC reconfiguration trigger
  - initscript now returns 2 in case that action doesn't exist (#523435)
  - enable/disable chroot when bind-chroot is installed/uninstalled


author: Adam Tkac <atkac redhat com> 32:9.7.1-0.1.b1
changelog:
  - update to 9.7.1b1
  - make /var/named/dynamic as a default directory for managed DNSSEC keys
  - add patch to get "managed-keys-directory" option working
  - patches merged
    - bind97-managed-keyfile.patch
    - bind97-rh554316.patch


author: Adam Tkac <atkac redhat com> 32:9.7.1-3.P1
changelog:
  - remove outdated Copyright.caching-nameserver file
  - remove rfc1912.txt, it is already located in %doc/rfc directory
  - move COPYRIGHT to the bind-libs subpkg
  - add COPYRIGHT to the -pkcs11 subpkg


author: Adam Tkac <atkac redhat com> 32:9.7.2-3.P2
changelog:
  - new bind-libs-lite and bind-lite-devel subpkgs which contain
    public version of BIND 9 libraries
  - don't ship devel files for internal version of BIND 9 libraries


author: Adam Tkac <atkac redhat com> 32:9.7.2-5.P2
changelog:
  - move BIND9 internal libs back to %{_libdir}
  - add "-export" suffix to public libraries (-lite subpkg)


author: Adam Tkac <atkac redhat com> 32:9.7.3-0.3.b1
changelog:
  - fix "service named status" when used with named-sdb
  - don't check MD5, size and mtime of sysconfig/named


author: Adam Tkac <atkac redhat com> 32:9.7.3-1
changelog:
  - update to 9.7.3
  - fix dig +trace on dualstack systems (#674334)
  - fix linkage order when building on system with older BIND (#665971)
  - reduce number of gcc warnings


author: Adam Tkac <atkac redhat com> 32:9.8.1-0.1.rc1
changelog:
  - update to 9.8.1rc1
  - patches merged
    - bind97-rh674334.patch
    - bind97-cleanup.patch
    - bind98-includes.patch


author: Adam Tkac <atkac redhat com> 32:9.8.1-0.2.rc1
changelog:
  - fix rare race condition in request.c
  - print "the working directory is not writable" as debug message
  - re-add configtest target to initscript
  - initscript: sybsys name is always named, not named-sdb
  - nsupdate returned zero when target zone didn't exist (#700097)
  - nsupdate could have failed if server has multiple IPs and the first
    was unreachable (#714049)


author: Adam Tkac <atkac redhat com> 32:9.8.1-0.3.rc1
changelog:
  - fix DLZ related compilation issues
  - make /etc/named.{root,iscdlv}.key world-readable
  - add bind-libs versioned requires to bind pkg


author: Adam Tkac <atkac redhat com> 32:9.8.1-1
changelog:
  - update to 9.8.1
  - ship /etc/trusted-key.key (needed by dig)
  - use select instead of epoll in export libs (#735103)


author: Adam Tkac <atkac redhat com> 32:9.9.0-0.3.b2
changelog:
  - update to 9.9.0b2 (CVE-2011-4313)
  - patches merged
    - bind97-rh700097.patch
    - bind99-cinfo.patch


author: Adam Tkac <atkac redhat com> 32:9.9.0-1
changelog:
  - update to 9.9.0
  - load dynamic DBs later (and update dyndb patch)
  - fix memory leak in named during processing of rndc command
  - don't call `rndc-confgen -a` in "post" section
  - fix some packaging bugs in bind-chroot


author: Tomas Hozza <thozza@redhat.com> 32:9.9.1-6.P2
changelog:
  - Fixed bad path to systemctl in /etc/NetworkManager/dispatcher.d/13-named (#844047)
  - Fixed path to libdb.so in config.dlz.in


author: Tomas Hozza <thozza@redhat.com> 32:9.9.1-9.P2
changelog:
  - fixed SPEC file so it comply with new systemd-rpm macros guidelines (#850045)
  - changed %define macros to %global and fixed several rpmlint warnings


author: Adam Tkac <atkac redhat com> 32:9.9.2-1
changelog:
  - update to 9.9.2
  - bind97-rh714049.patch has been dropped
  - patches merged
    - bind98-rh816164.patch


author: Adam Tkac <atkac redhat com> 32:9.9.2-6.P1
changelog:
  - generate /etc/rndc.key during named service startup if doesn't exist
  - increase startup timeout in systemd units to 90sec (default)
  - fix IDN related statement in dig.1 manpage


author: Tomas Hozza <thozza@redhat.com> 32:9.9.2-7.P1
changelog:
  - Corrected IP addresses in named.ca (#901741)
  - mount/umount /var/named in setup-named-chroot.sh as the last one (#904666)


author: Adam Tkac <atkac redhat com> 32:9.9.3-0.1.rc1
changelog:
  - update to 9.9.3rc1
  - bind-96-libtool2.patch has been merged
  - fix bind tmpfiles.d for named.pid /run migration (#920713)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-0.5.rc1
changelog:
  - Include recursion Warning in named.conf and named.conf.sample (#740894)
  - Include managed-keys-directory statement in named.conf.sample (#948026)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-0.6.rc2
changelog:
  - update to 9.9.3rc2
  - part of bind97-exportlib.patch not needed any more
  - bind-9.9.1-P2-multlib-conflict.patch modified to reflect latest source
  - rl-9.9.3rc1.patch -> rl-9.9.3rc2.patch
  - bind99-opts.patch merged


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-1
changelog:
  - update to 9.9.3
  - install dns/update.h header
  - update RRL patch to the latest version 9.9.3-rl.150.20


author: Tomas Hozza <thozza@redhat.com> 32:9.9.4-5
changelog:
  - Create symlink /var/named/chroot/var/run -> /var/named/chroot/run
  - Added session-keyfile statement into default named.conf since we use /run/named


author: Tomas Hozza <thozza@redhat.com> 32:9.9.4-10
changelog:
  - Split chroot package for named and named-sdb
  - Extract setting-up/destroying of chroot to a separate systemd service (#997030)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.5-2
changelog:
  - dlz_dlopen driver could return the wrong error leading to a segfault (#1052781)
  - Fix race condition when freeing fetch object (ISC-Bugs #35385)


author: Tomas Hozza <thozza@redhat.com> - 32:9.9.6-1
changelog:
  - Update to 9.9.6
  - drop merged patches and rebase some of existing patches
  - Add architecture specific dependencies.
  - Fix assert in dig when using +sigchase (#985918)


author: Tomas Hozza <thozza@redhat.com> - 32:9.9.6-2
changelog:
  - Added native PKCS#11 functionality (#1097752)
  - bind-sdb now requires bind due to configuration and other utilities
  - bind-pkcs11 now requires bind due to configuration and other utilities


author: Tomas Hozza <thozza@redhat.com> - 32:9.9.6-4
changelog:
  - Fixed systemctl path in logrotate configuration (#1148360)
  - drop engine_pkcs11 dependency, since we use native PKCS#11 implementation


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.2-0.1.rc1
changelog:
  - update to 9.10.2rc1
  - fix nsupdate server auto-detection (#1184151)
  - drop merged patch bind99-rh985918.patch


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.2-1
changelog:
  - update to 9.10.2 stable
  - remove parallel-build patch after discussion with upstream [ISC-Bugs #38739]


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.2-2
changelog:
  - enable tuning for large systems - increases hardcoded internal limits
  - enable GeoIP access control feature


author: Robert Scheck <robert@fedoraproject.org> - 32:9.10.3-8.P2
changelog:
  - Remove unrecognized build options for %configure
  - Own %{_includedir}/bind9 directory in -lite-devel
  - Fixed building without (optional) PKCS#11 support


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.3-9.P2
changelog:
  - Commented out bindkeys-file statement in default configuration (#1223365#c3)
  - Removed unrecognized configure option --enable-developer
  - Added configure option --enable-full-report to get report on enabled features


author: Tomas Hozza <thozza@redhat.com> - 32:9.10.3-13.P4
changelog:
  - Remove NM dispatcher script, since it is not needed any more (#1277257)
  - Replaced After=network-online.target with After=network.target in all unit files


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.0-6.P2
changelog:
  - RTLD_DEEPBIND conflicts with pkcs11 libraries, skip it for dyndb (#1410433)
  - Fix some rpm warnings


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-1
changelog:
  - Update to 9.11.2
  - Add recursing and secroots file into default and sample config
  - Fix nsupdate GSSAPI auth against AD server (#1484451)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-2
changelog:
  - Build against mariadb-connector-c-devel (#1493615)
  - Include DNSKEY 20326 also in trusted-key.key (#1505476)
  - Fix dynamic symbols conflict with ldap (#1205168)
  - Use hmac-sha256 for new RNDC keys (#1508003)
  - Include protocols and services in chroot


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-4
changelog:
  - Enable unit tests with kyua tool (#1532694)
  - Provide internal tool to prepare softhsm token storage
  - Proper fix for python3-bind subpackage directory ownership (#1522944)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.2-11.P1
changelog:
  - Use versioned provides
  - Fix starting of unit tests
  - Forward export libs path to isc-config
  - Rename export devel subpackage to bind-export-devel


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.3-2.b1
changelog:
  - Require openssl-devel and libcap-devel from bind-export-devel
  - Conflict with bind99-devel
  - Change spec globals to rpmbuild --with feature


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.3-15
changelog:
  - Use new config file named-chroot.files for chroot setup (#1429656)
  - Fix chroot devices file verification (#1592873)
  - Prevent errors on bind-chroot uninstall when running (#1600583)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-2
changelog:
  - Install generated manual pages
  - Remove system-config-bind from manual
  - Disable GeoIP support (#1609856)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-5.P1
changelog:
  - Update to 9.11.4-P1
  - Adds root key sentinel support
  - Large IXFR zone transfers are rejected to prevent journal corruption
  - Fixes CVE-2018-5740


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-7.P1
changelog:
  - Fix chroot devices upgrade warning (#1592872)
  - Automatically replace obsoleted ISC DLV key with root key (#1595782)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-19.P2
changelog:
  - Add support for OpenSSL provided random data
  - Disable often failing unit test random_test
  - Add /dev/urandom to chroot


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.12-2
changelog:
  - Add GeoLite2 support (#1564443)
  - Add GeoIP to bind-chroot (#1497646)
  - Fix wrong default GeoIP directory (#1768258)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.20-2
changelog:
  - Add manual page for dnssec-importkey-pkcs11 (#1666785)
  - Add versioned depends to all library subpackages


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.20-5
changelog:
  - Fix tsig-request verify (CVE-2020-8622)
  - Prevent PKCS11 daemon crash on crafted packet (CVE-2020-8623)
  - Correct update-policy type subdomain to match documentation (CVE-2020-8624)
  - Include available test


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.25-1
changelog:
  - Update to 9.11.25
  - Require libcap from devel package
  - Fix crash on NTA recheck failure (#1893761)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.26-2
changelog:
  - Add DNSTAP support (#1854148), new dnstap-read tool
  - Add JSON support in statistics-channel (#1899257)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.26-4
changelog:
  - Possible assertion failure on DNAME processing (CVE-2021-25215)
  - Insufficient IXFR checks could lead to assertion failure (CVE-2021-25214)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-4
changelog:
  - Tighten cache protection against record from forwarders (CVE-2021-25220)
  - Include test of forwarders


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-5
changelog:
  - Fix memory leak in ECDSA verify processing (CVE-2022-38177)
  - Fix memory leak in EdDSA verify processing (CVE-2022-38178)


author: Martin Nagy <mnagy@redhat.com> - 0.1.0-0.6.a1.20091210git
changelog:
  - update to the latest git snapshot
  - change upstream URL, project moved to fedorahosted
  - change license to GPL version 2 or later
  - add epoch to versioned requires
  - add krb5-devel to the list of build requires


author: Adam Tkac <atkac redhat com> - 0.2.0-1
changelog:
  - update to 0.2.0
  - patches merged
    - 0001-Bugfix-Improve-LDAP-schema-to-be-loadable-by-OpenLDA.patch
    - 0004-Bugfix-Fix-loading-of-child-zones-from-LDAP.patch


author: Petr Spacek <pspacek@redhat.com> - 6.0-3
changelog:
  - replace dependency on bind with dependency on bind-pkcs11 >= 32:9.9.6-2
    to help with freeipa-server upgrade


author: Petr Spacek <pspacek@redhat.com> - 10.1-1
changelog:
  - Update to 10.1.
  - Fix deletion of DNS root zone not to break global forwarding.
    https://fedorahosted.org/bind-dyndb-ldap/ticket/167


author: Petr Menšík <pemensik@redhat.com> - 10.1-2
changelog:
  - Patched to alfa 11.0 with support for BIND 9.11
  - Configuration format in named.conf is different
      and incompatible with all previous versions. Please see README.md.
  - Minimal BIND version is now 9.11.0rc1. Please see NEWS.


author: Tomas Krizek <tkrizek@redhat.com> - 11.1-1
changelog:
  - Update to 11.1
  - Bumped required version of BIND to 9.11.0-6.P2
    (required since bind-dyndb-ldap 11.0-1 release)
  - Updated source URL links to pagure


author: Thomas Woerner <twoerner@redhat.com> - 11.2-2
changelog:
  - Add support for serve-stale, detected on build time
    Patch by Petr Menšík <pemensik@redhat.com>
    Related: RHBZ#1762813


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-5.P1
changelog:
  - Update to 9.11.4-P1
  - Adds root key sentinel support
  - Large IXFR zone transfers are rejected to prevent journal corruption


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-6.P1
changelog:
  - Fix sdb-chroot devices upgrade (#1592873)
  - Automatically replace obsoleted ISC DLV key with root key (#1595782)


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.4-8.P1
changelog:
  - Replace unoptimized code by OpenSSL counterparts
  - Fix multilib conflicts of devel package
  - Add versioned depends to all library subpackages


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.5-2
changelog:
  - Add optional support for JSON statistics
  - Add optional DNSTAP support (#1564776), new dnstap-read tool


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.5-9.P1
changelog:
  - dig prints ASCII name instead of failure (#1647829)
  - disable IDN output from scripts
  - Update project URL
  - Removed revoked KSK 19164 from trusted keys


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.5-12.P1
changelog:
  - Enable DNSTAP support (#1564776)
  - Enable LMDB support for rndc addzone
  - Enable json format in statistics-channel


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.10-2
changelog:
  - Move some administration utilities back to bind-utils (#1720380)
  - Add GeoIP to bind-chroot (#1497646)
  - Recommend bind-dnssec-utils from bind-pkcs11-utils


author: Fedora Release Engineering <releng@fedoraproject.org> - 32:9.11.14-5
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild

   * Wed Jan 08 2020 Petr Menšík <pemensik@redhat.com> - 32:9.11.14-4
  - Remove libmaxminddb-devel from devel package dependencies


author: Petr Menšík <pemensik@redhat.com> - 32:9.16.13-1
changelog:
  - Update to 9.16.13
  - Changed displayed version just to include -RH suffix, not release
  - Version is now part of library names, soname versions are no longer provided
  - Removed bind-libs-lite subpackage


author: Petr Menšík <pemensik@redhat.com> - 32:9.16.15-3
changelog:
  - Disable building of DLZ and PKCS11
  - Build HTML documentation into separate bind-doc subpackage
  - Enable DNSTAP feature (#1975268)
  - Enable LMDB support (#1975775)


author: Petr Menšík <pemensik@redhat.com> - 32:9.16.23-0.10
changelog:
  - Fix possible serve-stale related crash (CVE-2022-3080)
  - Fix memory leak in ECDSA verify processing (CVE-2022-38177)
  - Fix memory leak in EdDSA verify processing (CVE-2022-38178)


author: Petr Menšík <pemensik@redhat.com> - 32:9.16.23-0.13
changelog:
  - Prevent flooding with UPDATE requests (CVE-2022-3094)
  - Handle RRSIG queries when server-stale is active (CVE-2022-3736)
  - Fix crash when soft-quota is reached and serve-stale is active (CVE-2022-3924)


author: Petr Machata <pmachata@redhat.com> - 2.3-6
changelog:
  - Merge review:
    - Drop terminating dot from Summary
    - Escape macros inadvertently left in changelog
    - Explain why are there source files in the main package


author: Petr Machata <pmachata@redhat.com> - 2.4.2-2
changelog:
  - Disable the mysteriously failing test no. 67.  Details in associated
    bugreport. (bison-2.4.2-drop-test-67.patch)
  - Resolves: #576513


author: Patsy Griffin Franklin <pfrankli@redhat.com> - 3.0.5-1
changelog:
  - _IO_ftrylockfile is obsolete as part of the removal of libio.h
  - Build requires gcc-c++ to fix build failure. (#1603491)
  - Update to bison 3.0.5 (#1583179)


author: Trond Eivind Glomsrod <teg@pvv.ntnu.no>
changelog:
  [lapack-2.0-5]
    - added a changelog
    - cleaned up building of shared libs
    - now uses a BuildRoot
    - cleaned up the specfile


author: Trond Eivind Glomsrod <teg@pvv.ntnu.no>
changelog:
  [lapack-2.0-8]
   - Total rewrite of the spec file
   - Added my own makefiles - libs should build better,
     static libs should work (and be faster than they
  	would be if they had worked earlier ;)
   - No patch necessary anymore.
   - Renamed lapack-blas and lapack-blas-man to
     blas and blas-man. "Obsoletes:" tag added.
     (oh - and as always: Dedicated to the girl I
     love, Eline Skirnisdottir)


author: Trond Eivind Glomsrod <teg@pvv.ntnu.no>
changelog:
  [lapack-2.0-9]
   - No code updates, just built with a customized rpm -
     this should make dependencies right.


author: Trond Eivind Glomsrod <teg@redhat.com>
changelog:
  - Add all patches from the LAPACK site as of 2001-05-25
  - Use this workaround for IA64 instead
  - Remove SPARC workaround
  - Don't exclude IA64


author: Tom "spot" Callaway <tcallawa@redhat.com> 3.0-32
changelog:
  - move to latest upstream 3.0 tarballs
  - add 8 missing BLAS functions from upstream blas tarball (bz 143340)


author: Tom "spot" Callaway <tcallawa@redhat.com> - 3.2.2-1
changelog:
  - update to 3.2.2
  - properly include license text
  - static subpackages depend on -devel (they're not useful without it)
  - clean up makefiles
  - pass on version into makefiles, rather than manually hacking on each update


author: Tom Callaway <spot@fedoraproject.org> - 3.3.1-1
changelog:
  - update to 3.3.1
  - create /usr/share/man/manl/ as 0755 and own it in lapack and blas (bz634369)
  - spec file cleanup


author: Michael Schwendt <mschwendt@fedoraproject.org> - 3.5.0-2
changelog:
  - Don't include manual page directories (#1089412).
  - Use standard group System Environment/Libraries in runtime library packages.


author: Tom Callaway <spot@fedoraproject.org> - 3.5.0-12
changelog:
  - fix missing dependencies between subpackages
  - delete broken and wrongly installed manpages
  - fix isa_bits conditional


author: Tom Callaway <spot@fedoraproject.org> - 3.6.0-6
changelog:
  - fix lapack Makefile to rebuild every file on every pass (thanks to adm.fkt.physik <at> tu-dortmund.de)


author: Adrian Reber <adrian@lisas.de> - 1.1.7-1
changelog:
  - updated to 1.1.7
  - moved bogoupgrade to its own package to remove the perl
    dependency on bogofilter (bz #442843)


author: Adrian Reber <adrian@lisas.de> - 1.2.4-7
changelog:
  - Added multiple upstream patches to fix various memory bugs
  - Fixes "[abrt] bogofilter: yyrealloc(): bogofilter killed by SIGABRT" (#1246282)
  - Fixes "why libdb4" (#1367329) by switching BR to libdb-devel (from db4-devel)


author: Liwei Ge <liwei.glw@alibaba-inc.com> - 1.66.0-10.0.1
changelog:
  - backport patches to fit with C++20 until upstream chase up:
    * Replace-std::allocate-with-std::allocator_traits.patch
    * Replace-std::allocate-deprecated-in-C++17.patch
    * Implement-empty_value.patch
    * Make-empty_value-trivial-if-T-is-trivial.patch
    * Add-documentation-for-empty_value.patch
    * Name-the-empty_value-template-parameters.patch
    * Improve-C++11-allocator-support.patch
    * Use-boost::allocator_rebind-instead-of-A::template-rebind.patch
    * Implement-allocator-access-utilities.patch


author: Jerome Marchand <jmarchan@redhat.com> - 0.9-2
changelog:
  - Fixes gethostlatency
  - Fixes a struct definition issue that made several tools fail
  - Add CI gating


author: Jerome Marchand <jmarchan@redhat.com> - 0.10.0-3
changelog:
  - Fix ENOMEM issue on arm64 machine with many cpus
  - Fix statsnoop and opensnoop on aarch64
  - Drop tcpdrop on ppc64


author: Viktor Malik <vmalik@redhat.com> - 0.16.0-1
changelog:
  - Rebase on bpftrace 0.16.0
  - Rebuild for LLVM15
  - Download the cereal library (not packaged into RHEL8)


author: Denis Leroy <denis@poolshark.org> - 0.6.0-1
changelog:
  - Update to 0.6.0
  - Removed libburn support until it compiles against libisofs 0.2.8
  - Fixed project URL
  - Added patch to port to new Gtk+ tooltip interface
  - Added patch to fix filter dialog crash


author: Denis Leroy <denis@poolshark.org> - 2.25.90-1
changelog:
  - Update to upstream 2.25.90
  - Split media library into separate RPM (#483754)
  - Added patch to validate desktop files


author: Denis Leroy <denis@poolshark.org> - 2.25.91.2-1
changelog:
  - Update to upstream 2.25.91.2
  - Dvdcss patch upstreamed
  - Split nautilus extension into subpackage (#485918)


author: Matthias Clasen <mclasen@redhat.com> - 2.28.1-1
changelog:
  - Update to 2.28.1, fixes a number of crashes and other serious bugs:
   - Fix a crash when we try to download a missing gstreamer plugin through PK
   - Don't fail if a drive cannot be checksumed after a burn
   - Fix a data corruption when libisofs was used for a dummy session
   - Fix #596625: brasero crashed with SIGSEGV in brasero_track_data_cfg_add
   - Fix progress reporting
   ...


author: Kalev Lember <klember@redhat.com> - 3.12.2-1
changelog:
  - Update to 3.12.2
  - Use desktop-file-validate instead of desktop-file-install
  - Update download URLs


author: Adrian Havill <havill@redhat.com> 3.2-2
changelog:
  - changed spec "Copyright" to "License"
  - use %configure macro, %{_libdir} for non-ia32 archs
  - removed unnecessary set and unset, assumed/default spec headers
  - fixed unpackaged man page, duplicate /bin and /lib entries
  - use plain install vs scripts for non-i386 buildsys


author: Tomas Janousek <tjanouse@redhat.com> - 3.8-1
changelog:
  - update to latest upstream
  - added the at-spi driver, tcl and python bindings
  - fixed the license tags


author: Stepan Kasal <skasal@redhat.com> - 3.9-3
changelog:
  - add brltty-3.9-autoconf.patch to fix to build with Autoconf 2.62
  - add brltty-3.9-parallel.patch to fix race condition with parallel make
  - add brltty-3.9-pyxfix.patch to fix build with current pyrex
  - Summary lines shall not end with a dot


author: Stepan Kasal <skasal@redhat.com> - 3.10-1
changelog:
  - new upstream release
  - drop brltty-3.9-java-svn.patch, brltty-3.9-tcl85path.patch,
    and brltty-3.9-pyxfix.patch, they are upstream
  - fix BuildRoot
  - fix many sub-packages' Requires on brlapi


author: Stepan Kasal <skasal@redhat.com> - 3.10-4
changelog:
  - own the tcl subdirectory (#474032)
  - set CPPFLAGS to java include dirs, so that the java bindings build with
    any java implementation (#498964)
  - add --without-curses; there is no curses package BuildRequired anyway


author: Stepan Kasal <skasal@redhat.com> - 4.0-1
changelog:
  - new upstream version
  - drop upstreamed patches; ./autogen not needed anymore
  - pack the xbrlapi server; move its man page to brlapi package
  - add man-page for brltty.conf (#526168)


author: Stepan Kasal <skasal@redhat.com> - 4.0-2
changelog:
  - escape rpm macros in the rpm change log
  - add requires to bind subpackages from one build together


author: Stepan Kasal <skasal@redhat.com> - 4.1-1
changelog:
  - new upstream version
  - use --disable-stripping instead of make variable override
  - install the default brltty-pm.conf to docdir only (#526168)
  - remove the duplicate copies of rhmkboot and rhmkroot from docdir
  - patch configure so that the dirs in summary are not garbled:
    brltty-autoconf-quote.patch
  - move data-directory to ${datadir}/brltty


author: Stepan Kasal <skasal@redhat.com> - 4.1-2
changelog:
  - move data-directory back to default: /etc/brltty
  - move brltty to /bin and /lib, so that it can be used to repair the system
    without /usr mounted (#276181)
  - move vstp and libbrlttybba.so to brlapi
  - brltty no longer requires brlapi
  - brlapi now requires brltty from the same build


author: Stepan Kasal <skasal@redhat.com> - 4.1-3
changelog:
  - build the TTY driver (it was disabled since it first appered in 3.7.2-1)
  - build with speech-dispatcher, packed into a separate sub-package


author: Jon Ciesla <limb@jcomserv.net> - 4.3-1
changelog:
  - New upstream.
  - S_ISCHR patch upstreamed.
  - parallel patch updated.
  - Cleaned up some file encodings.


author: Jon Ciesla <limburgher@gmail.com> - 4.5-5
changelog:
  - Add systemd unit file, BZ 916628.
  - Drop spurious post scripts.
  - Move eveything but man pages and license files top -docs.


author: Richard W.M. Jones <rjones@redhat.com> - 4.5-8
changelog:
  - Rebuild for OCaml 4.01.0.
  - Create stublibs directory for OCaml, else install fails.
  - Unset MAKEFLAGS so that MAKEFLAGS=-j<N> does not break local builds.
  - In new speech-dispatcher, <libspeechd.h> has moved to a subdirectory.


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.0-1
changelog:
  - New version
    Resolves: rhbz#1067337
  - Dropped man-fix patch (upstreamed)
  - De-fuzzified libspeechd patch
  - Handled locales
  - Switched to xz compressed sources


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.2-5
changelog:
  - Added support for AtSpi2 driver
    Resolves: rhbz#1204462
  - Added support for eSpeak driver
  - Filtered private libraries from provides/requires


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.3.1-5
changelog:
  - Fixed XW driver to show Braille characters
    Related: rhbz#1324669
  - No need to explicitly harden
  - Added architecture to subpackages requirements
  - Made brltty main package to explicitly requires specific brlapi version
  - Renumbered patches


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.4-1
changelog:
  - New version
    Resolves: rhbz#1350990
  - Dropped xw-fonts-fix and async-wait patches (both upstreamed)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 5.5-9
changelog:
  - Python 2 binary package renamed to python2-brltty
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.6-13
changelog:
  - Systemd service is now installed to default and emergency targets,
    because assistive technology should be available there


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.6-20
changelog:
  - Fixed installation of multiple drivers and text tables in Dracut module
    if environment variables are used


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.6-28
changelog:
  - Built OCaml bindings with distribution CFLAGS and consolidated patches
  - Fixed Cython build requires
  - Used macro for python3 path


author: Jaroslav Škarvada <jskarvad@redhat.com> - 6.1-8
changelog:
  - Dropped explicit brlapi dependency (brltty) and relaxed brltty
    dependency (brlapi)
    Related: rhbz#1765611


author: Dan Walsh <dwalsh@redhat.com> 0.2.0-1.gitac2aad6
changelog:
  -   buildah run: Add support for -- ending options parsing
  -   buildah Add/Copy support for glob syntax
  -   buildah commit: Add flag to remove containers on commit
  -   buildah push: Improve man page and help information
  -   buildah run: add a way to disable PTY allocation
  -   Buildah docs: clarify --runtime-flag of run command
  -   Update to match newer storage and image-spec APIs
  -   Update containers/storage and containers/image versions
  -   buildah export: add support
  -   buildah images: update commands
  -   buildah images: Add JSON output option
  -   buildah rmi: update commands
  -   buildah containers: Add JSON output option
  -   buildah version: add command
  -   buildah run: Handle run without an explicit command correctly
  -   Ensure volume points get created, and with perms
  -   buildah containers: Add a -a/--all option


author: Dan Walsh <dwalsh@redhat.com> 0.4-1.git9cbccf88c
changelog:
  -   Add default transport to push if not provided
  -   Avoid trying to print a nil ImageReference
  -   Add authentication to commit and push
  -   Add information on buildah from man page on transports
  -   Remove --transport flag
  -   Run: do not complain about missing volume locations
  -   Add credentials to buildah from
  -   Remove export command
  -   Run(): create the right working directory
  -   Improve "from" behavior with unnamed references
  -   Avoid parsing image metadata for dates and layers
  -   Read the image's creation date from public API
  -   Bump containers/storage and containers/image
  -   Don't panic if an image's ID can't be parsed
  -   Turn on --enable-gc when running gometalinter
  -   rmi: handle truncated image IDs


author: Dan Walsh <dwalsh@redhat.com> 0.5-1
changelog:
  -  Add secrets patch to buildah
  -  Add proper SELinux labeling to buildah run
  -  Add tls-verify to bud command
  -  Make filtering by date use the image's date
  -  images: don't list unnamed images twice
  -  Fix timeout issue
  -  Add further tty verbiage to buildah run
  -  Make inspect try an image on failure if type not specified
  -  Add support for `buildah run --hostname`
  -  Tons of bug fixes and code cleanup


author: Dan Walsh <dwalsh@redhat.com> 0.7-1
changelog:
  - Ignore errors when trying to read containers buildah.json for loading SELinux reservations
  -     Use credentials from kpod login for buildah
  - Adds support for converting manifest types when using the dir transport
  - Rework how we do UID resolution in images
  - Bump github.com/vbatts/tar-split
  - Set option.terminal appropriately in run


author: Dan Walsh <dwalsh@redhat.com> 0.8-1
changelog:
  - Buildah bud was failing on SELinux machines, this fixes this
  - Block access to certain kernel file systems inside of the container


author: Dan Walsh <dwalsh@redhat.com> 0.10-1
changelog:
  - Display Config and Manifest as strings
  - Bump containers/image
  - Use configured registries to resolve image names
  - Update to work with newer image library
  - Add --chown option to add/copy commands


author: Dan Walsh <dwalsh@redhat.com> 0.11-1
changelog:
  - Add --all to remove containers
  - Add --all functionality to rmi
  - Show ctrid when doing rm -all
  - Ignore sequential duplicate layers when reading v2s1
  - Lots of minor bug fixes
  - Vendor in latest containers/image and containers/storage


author: Dan Walsh <dwalsh@redhat.com> 0.12-1
changelog:
  - Added handing for simpler error message for Unknown Dockerfile instructions.
  - Change default certs directory to /etc/containers/certs.dir
  - Vendor in latest containers/image
  - Vendor in latest containers/storage
  - build-using-dockerfile: set the 'author' field for MAINTAINER
  - Return exit code 1 when buildah-rmi fails
  - Trim the image reference to just its name before calling getImageName
  - Touch up rmi -f usage statement
  - Add --format and --filter to buildah containers
  - Add --prune,-p option to rmi command
  - Add authfile param to commit
  - Fix --runtime-flag for buildah run and bud
  - format should override quiet for images
  - Allow all auth params to work with bud
  - Do not overwrite directory permissions on --chown
  - Unescape HTML characters output into the terminal
  - Fix: setting the container name to the image
  - Prompt for un/pwd if not supplied with --creds
  - Make bud be really quiet
  - Return a better error message when failed to resolve an image
  - Update auth tests and fix bud man page


author: Dan Walsh <dwalsh@redhat.com> 0.14-1
changelog:
  - If commonOpts do not exist, we should return rather then segfault
  - Display full error string instead of just status
  - Implement --volume and --shm-size for bud and from
  - Fix secrets patch for buildah bud
  - Fixes the naming issue of blobs and config for the dir transport by removing the .tar extension


author: Dan Walsh <dwalsh@redhat.com> 0.16-1
changelog:
  -   Add support for shell
  -   Vendor in latest containers/image
  -    	 docker-archive generates docker legacy compatible images
  -	 Do not create $DiffID subdirectories for layers with no configs
  - 	 Ensure the layer IDs in legacy docker/tarfile metadata are unique
  -	 docker-archive: repeated layers are symlinked in the tar file
  -	 sysregistries: remove all trailing slashes
  -	 Improve docker/* error messages
  -	 Fix failure to make auth directory
  -	 Create a new slice in Schema1.UpdateLayerInfos
  -	 Drop unused storageImageDestination.{image,systemContext}
  -	 Load a *storage.Image only once in storageImageSource
  -	 Support gzip for docker-archive files
  -	 Remove .tar extension from blob and config file names
  -	 ostree, src: support copy of compressed layers
  -	 ostree: re-pull layer if it misses uncompressed_digest|uncompressed_size
  -	 image: fix docker schema v1 -> OCI conversion
  -	 Add /etc/containers/certs.d as default certs directory
  -  Change image time to locale, add troubleshooting.md, add logo to other mds
  -   Allow --cmd parameter to have commands as values
  -   Document the mounts.conf file
  -   Fix man pages to format correctly
  -   buildah from now supports pulling images using the following transports:
  -   docker-archive, oci-archive, and dir.
  -   If the user overrides the storage driver, the options should be dropped
  -   Show Config/Manifest as JSON string in inspect when format is not set
  -   Adds feature to pull compressed docker-archive files


author: Dan Walsh <dwalsh@redhat.com> 1.0-1
changelog:
  - Remove buildah run cmd and entrypoint execution
  - Add Files section with registries.conf to pertinent man pages
  - Force "localhost" as a default registry
  - Add --compress, --rm, --squash flags as a noop for bud
  - Add FIPS mode secret to buildah run and bud
  - Add config --comment/--domainname/--history-comment/--hostname
  - Add support for --iidfile to bud and commit
  - Add /bin/sh -c to entrypoint in config
  - buildah images and podman images are listing different sizes
  - Remove tarball as an option from buildah push --help
  - Update entrypoint behaviour to match docker
  - Display imageId after commit
  - config: add support for StopSignal
  - Allow referencing stages as index and names
  - Add multi-stage builds support
  - Vendor in latest imagebuilder, to get mixed case AS support
  - Allow umount to have multi-containers
  - Update buildah push doc
  - buildah bud walks symlinks
  - Imagename is required for commit atm, update manpage


author: Dan Walsh <dwalsh@redhat.com> 1.1-1
changelog:
  - Drop capabilities if running container processes as non root
  - Print Warning message if cmd will not be used based on entrypoint
  - Update 01-intro.md
  - Shouldn't add insecure registries to list of search registries
  - Report errors on bad transports specification when pushing images
  - Move parsing code out of common for namespaces and into pkg/parse.go
  - Add disable-content-trust noop flag to bud
  - Change freenode chan to buildah
  - runCopyStdio(): don't close stdin unless we saw POLLHUP
  - Add registry errors for pull
  - runCollectOutput(): just read until the pipes are closed on us
  - Run(): provide redirection for stdio
  - rmi, rm: add test
  - add mount test
  - Add parameter judgment for commands that do not require parameters
  - Add context dir to bud command in baseline test
  - run.bats: check that we can run with symlinks in the bundle path
  - Give better messages to users when image can not be found
  - use absolute path for bundlePath
  - Add environment variable to buildah --format
  - rm: add validation to args and all option
  - Accept json array input for config entrypoint
  - Run(): process RunOptions.Mounts, and its flags
  - Run(): only collect error output from stdio pipes if we created some
  - Add OnBuild support for Dockerfiles
  - Quick fix on demo readme
  - run: fix validate flags
  - buildah bud should require a context directory or URL
  - Touchup tutorial for run changes
  - Validate common bud and from flags
  - images: Error if the specified imagename does not exist
  - inspect: Increase err judgments to avoid panic
  - add test to inspect
  - buildah bud picks up ENV from base image
  - Extend the amount of time travis_wait should wait
  - Add a make target for Installing CNI plugins
  - Add tests for namespace control flags
  - copy.bats: check ownerships in the container
  - Fix SELinux test errors when SELinux is enabled
  - Add example CNI configurations
  - Run: set supplemental group IDs
  - Run: use a temporary mount namespace
  - Use CNI to configure container networks
  - add/secrets/commit: Use mappings when setting permissions on added content
  - Add CLI options for specifying namespace and cgroup setup
  - Always set mappings when using user namespaces
  - Run(): break out creation of stdio pipe descriptors
  - Read UID/GID mapping information from containers and images
  - Additional bud CI tests
  - Run integration tests under travis_wait in Travis
  - build-using-dockerfile: add --annotation
  - Implement --squash for build-using-dockerfile and commit
  - Vendor in latest container/storage for devicemapper support
  - add test to inspect
  - Vendor github.com/onsi/ginkgo and github.com/onsi/gomega
  - Test with Go 1.10, too
  - Add console syntax highlighting to troubleshooting page
  - bud.bats: print "$output" before checking its contents
  - Manage "Run" containers more closely
  - Break Builder.Run()'s "run runc" bits out
  - util.ResolveName(): handle completion for tagged/digested image names
  - Handle /etc/hosts and /etc/resolv.conf properly in container
  - Documentation fixes
  - Make it easier to parse our temporary directory as an image name
  - Makefile: list new pkg/ subdirectoris as dependencies for buildah
  - containerImageSource: return more-correct errors
  - API cleanup: PullPolicy and TerminalPolicy should be types
  - Make "run --terminal" and "run -t" aliases for "run --tty"
  - Vendor github.com/containernetworking/cni v0.6.0
  - Update github.com/containers/storage
  - Update github.com/projectatomic/libpod
  - Add support for buildah bud --label
  - buildah push/from can push and pull images with no reference
  - Vendor in latest containers/image
  - Update gometalinter to fix install.tools error
  - Update troubleshooting with new run workaround
  - Added a bud demo and tidied up
  - Attempt to download file from url, if fails assume Dockerfile
  - Add buildah bud CI tests for ENV variables
  - Re-enable rpm .spec version check and new commit test
  - Update buildah scratch demo to support el7
  - Added Docker compatibility demo
  - Update to F28 and new run format in baseline test
  - Touchup man page short options across man pages
  - Added demo dir and a demo. chged distrorlease
  - builder-inspect: fix format option
  - Add cpu-shares short flag (-c) and cpu-shares CI tests
  - Minor fixes to formatting in rpm spec changelog
  - Fix rpm .spec changelog formatting
  - CI tests and minor fix for cache related noop flags
  - buildah-from: add effective value to mount propagation


author: Dan Walsh <dwalsh@redhat.com> 1.2-1
changelog:
  - Vendor in latest containers/image
  - build-using-dockerfile: let -t include transports again
  - Block use of /proc/acpi and /proc/keys from inside containers
  - Fix handling of --registries-conf
  - Fix becoming a maintainer link
  - add optional CI test fo darwin
  - Don't pass a nil error to errors.Wrapf()
  - image filter test: use kubernetes/pause as a "since"
  - Add --cidfile option to from
  - vendor: update containers/storage
  - Contributors need to find the CONTRIBUTOR.md file easier
  - Add a --loglevel option to build-with-dockerfile
  - Create Development plan
  - cmd: Code improvement
  - allow buildah cross compile for a darwin target
  - Add unused function param lint check
  - docs: Follow man-pages(7) suggestions for SYNOPSIS
  - Start using github.com/seccomp/containers-golang
  - umount: add all option to umount all mounted containers
  - runConfigureNetwork(): remove an unused parameter
  - Update github.com/opencontainers/selinux
  - Fix buildah bud --layers
  - Force ownership of /etc/hosts and /etc/resolv.conf to 0:0
  - main: if unprivileged, reexec in a user namespace
  - Vendor in latest imagebuilder
  - Reduce the complexity of the buildah.Run function
  - mount: output it before replacing lastError
  - Vendor in latest selinux-go code
  - Implement basic recognition of the "--isolation" option
  - Run(): try to resolve non-absolute paths using $PATH
  - Run(): don't include any default environment variables
  - build without seccomp
  - vendor in latest runtime-tools
  - bind/mount_unsupported.go: remove import errors
  - Update github.com/opencontainers/runc
  - Add Capabilities lists to BuilderInfo
  - Tweaks for commit tests
  - commit: recognize committing to second storage locations
  - Fix ARGS parsing for run commands
  - Add info on registries.conf to from manpage
  - Switch from using docker to podman for testing in .papr
  - buildah: set the HTTP User-Agent
  - ONBUILD tutorial
  - Add information about the configuration files to the install docs
  - Makefile: add uninstall
  - Add tilde info for push to troubleshooting
  - mount: support multiple inputs
  - Use the right formatting when adding entries to /etc/hosts
  - Vendor in latest go-selinux bindings
  - Allow --userns-uid-map/--userns-gid-map to be global options
  - bind: factor out UnmountMountpoints
  - Run(): simplify runCopyStdio()
  - Run(): handle POLLNVAL results
  - Run(): tweak terminal mode handling
  - Run(): rename 'copyStdio' to 'copyPipes'
  - Run(): don't set a Pdeathsig for the runtime
  - Run(): add options for adding and removing capabilities
  - Run(): don't use a callback when a slice will do
  - setupSeccomp(): refactor
  - Change RunOptions.Stdin/Stdout/Stderr to just be Reader/Writers
  - Escape use of '_' in .md docs
  - Break out getProcIDMappings()
  - Break out SetupIntermediateMountNamespace()
  - Add Multi From Demo
  - Use the c/image conversion code instead of converting configs manually
  - Don't throw away the manifest MIME type and guess again
  - Consolidate loading manifest and config in initConfig
  - Pass a types.Image to Builder.initConfig
  - Require an image ID in importBuilderDataFromImage
  - Use c/image/manifest.GuessMIMEType instead of a custom heuristic
  - Do not ignore any parsing errors in initConfig
  - Explicitly handle "from scratch" images in Builder.initConfig
  - Fix parsing of OCI images
  - Simplify dead but dangerous-looking error handling
  - Don't ignore v2s1 history if docker_version is not set
  - Add --rm and --force-rm to buildah bud
  - Add --all,-a flag to buildah images
  - Separate stdio buffering from writing
  - Remove tty check from images --format
  - Add environment variable BUILDAH_RUNTIME
  - Add --layers and --no-cache to buildah bud
  - Touch up images man
  - version.md: fix DESCRIPTION
  - tests: add containers test
  - tests: add images test
  - images: fix usage
  - fix make clean error
  - Change 'registries' to 'container registries' in man
  - add commit test
  - Add(): learn to record hashes of what we add
  - Minor update to buildah config documentation for entrypoint
  - Add registries.conf link to a few man pages


author: Dan Walsh <dwalsh@redhat.com> - 1.3-1
changelog:
  - Bump to v1.3
  - Vendor in lates containers/image
  - build-using-dockerfile: let -t include transports again
  - Block use of /proc/acpi and /proc/keys from inside containers
  - Fix handling of --registries-conf
  - Fix becoming a maintainer link
  - add optional CI test fo darwin
  - Don't pass a nil error to errors.Wrapf()
  - image filter test: use kubernetes/pause as a "since"
  - Add --cidfile option to from
  - vendor: update containers/storage
  - Contributors need to find the CONTRIBUTOR.md file easier
  - Add a --loglevel option to build-with-dockerfile
  - Create Development plan
  - cmd: Code improvement
  - allow buildah cross compile for a darwin target
  - Add unused function param lint check
  - docs: Follow man-pages(7) suggestions for SYNOPSIS
  - Start using github.com/seccomp/containers-golang
  - umount: add all option to umount all mounted containers
  - runConfigureNetwork(): remove an unused parameter
  - Update github.com/opencontainers/selinux
  - Fix buildah bud --layers
  - Force ownership of /etc/hosts and /etc/resolv.conf to 0:0
  - main: if unprivileged, reexec in a user namespace
  - Vendor in latest imagebuilder
  - Reduce the complexity of the buildah.Run function
  - mount: output it before replacing lastError
  - Vendor in latest selinux-go code
  - Implement basic recognition of the "--isolation" option
  - Run(): try to resolve non-absolute paths using $PATH
  - Run(): don't include any default environment variables
  - build without seccomp
  - vendor in latest runtime-tools
  - bind/mount_unsupported.go: remove import errors
  - Update github.com/opencontainers/runc
  - Add Capabilities lists to BuilderInfo
  - Tweaks for commit tests
  - commit: recognize committing to second storage locations
  - Fix ARGS parsing for run commands
  - Add info on registries.conf to from manpage
  - Switch from using docker to podman for testing in .papr
  - buildah: set the HTTP User-Agent
  - ONBUILD tutorial
  - Add information about the configuration files to the install docs
  - Makefile: add uninstall
  - Add tilde info for push to troubleshooting
  - mount: support multiple inputs
  - Use the right formatting when adding entries to /etc/hosts
  - Vendor in latest go-selinux bindings
  - Allow --userns-uid-map/--userns-gid-map to be global options
  - bind: factor out UnmountMountpoints
  - Run(): simplify runCopyStdio()
  - Run(): handle POLLNVAL results
  - Run(): tweak terminal mode handling
  - Run(): rename 'copyStdio' to 'copyPipes'
  - Run(): don't set a Pdeathsig for the runtime
  - Run(): add options for adding and removing capabilities
  - Run(): don't use a callback when a slice will do
  - setupSeccomp(): refactor
  - Change RunOptions.Stdin/Stdout/Stderr to just be Reader/Writers
  - Escape use of '_' in .md docs
  - Break out getProcIDMappings()
  - Break out SetupIntermediateMountNamespace()
  - Add Multi From Demo
  - Use the c/image conversion code instead of converting configs manually
  - Don't throw away the manifest MIME type and guess again
  - Consolidate loading manifest and config in initConfig
  - Pass a types.Image to Builder.initConfig
  - Require an image ID in importBuilderDataFromImage
  - Use c/image/manifest.GuessMIMEType instead of a custom heuristic
  - Do not ignore any parsing errors in initConfig
  - Explicitly handle "from scratch" images in Builder.initConfig
  - Fix parsing of OCI images
  - Simplify dead but dangerous-looking error handling
  - Don't ignore v2s1 history if docker_version is not set
  - Add --rm and --force-rm to buildah bud
  - Add --all,-a flag to buildah images
  - Separate stdio buffering from writing
  - Remove tty check from images --format
  - Add environment variable BUILDAH_RUNTIME
  - Add --layers and --no-cache to buildah bud
  - Touch up images man
  - version.md: fix DESCRIPTION
  - tests: add containers test
  - tests: add images test
  - images: fix usage
  - fix make clean error
  - Change 'registries' to 'container registries' in man
  - add commit test
  - Add(): learn to record hashes of what we add
  - Minor update to buildah config documentation for entrypoint
  - Bump to v1.2-dev
  - Add registries.conf link to a few man pages


author: Jindrich Novy <jnovy@redhat.com> - 1.11.6-2
changelog:
  - fix chroot: unmount with MNT_DETACH instead of UnmountMountpoints()
  - bug reference 1772179
  - Related: RHELPLAN-25139


author: Jindrich Novy <jnovy@redhat.com> - 1.11.6-7
changelog:
  - fix "CVE-2020-10696 buildah: crafted input tar file may lead to local file overwriting during image build process"
  - Resolves: #1819393


author: Jindrich Novy <jnovy@redhat.com> - 1.11.6-9
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.11-rhel
    (https://github.com/containers/buildah/commit/6a746dc)
  - fixes CVE-2021-3602
  - Related: #1977942


author: Jindrich Novy <jnovy@redhat.com> - 1.11.6-10
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.11-rhel
    (https://github.com/containers/buildah/commit/9a4764a)
  - fixes CVE-2022-27649
  - Resolves: #2067545


author: Jindrich Novy <jnovy@redhat.com> - 1.11.6-8
changelog:
  - fix "CVE-2020-10696 buildah: crafted input tar file may lead to local file overwriting during image build process"
  - Resolves: #1819810


author: Jindrich Novy <jnovy@redhat.com> - 1.15.0-2
changelog:
  - fix "CVE-2020-14040 buildah: golang.org/x/text: possibility to trigger an infinite loop in encoding/unicode could lead to crash [rhel-8]"
  - Resolves: #1854717


author: Jindrich Novy <jnovy@redhat.com> - 1.15.1-2
changelog:
  - propagate proper CFLAGS to CGO_CFLAGS to assure code hardening and optimization
  - Related: #1821193


author: Jindrich Novy <jnovy@redhat.com> - 1.16.4-2
changelog:
  - use the mainline 1.16.4 buildah release as starting point for 8.4.0
    not the content from upstream branch yet
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.2-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/06e091b)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.3-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/af31e45)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.3-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/17521db)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.3-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/a96b716)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.4-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/76beccc)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.5-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/1fb260f)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.5-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/db783f4)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.5-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/9dd415b)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.5-4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/e5384ed)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.5-5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/dcd385e)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.6-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/7aedb16)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/c1d6200)
  - fixes CVE-2021-3602
  - Related: #1977943


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/ff5434f)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/3808e27)
  - Resolves: #2067540


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/3808e27)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/7c6701d)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/d69ac6e)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1.19.9-6
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/6d7f496)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1.19.5-5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.19
    (https://github.com/containers/buildah/commit/016b90d)
  - Related: #1883490


author: Jindrich Novy <jnovy@redhat.com> - 1.20.1-1
changelog:
  - update to https://github.com/containers/buildah/releases/tag/v1.20.1
  - sync tests with Fedora
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/22fc573)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-0.3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/135d63d)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-0.4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/a0853c3)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-0.5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/5119393)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-0.6
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/162fbaf)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-0.7
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/f30b420)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.20.2-0.8
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/c3a3fe8)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/f629ded)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/2a83637)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/19d3065)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/df14b1c)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.6
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/d677bf0)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.7
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/8a6d840)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.1-0.8
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/4fa566e)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/bbbe10a)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/d08dbe7)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/9c7f50b)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/8d08247)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.6
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/d99221f)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.7
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/30c07b7)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.8
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/db16262)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.9
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/5181b9c)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.10
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/802a904)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.11
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/master
    (https://github.com/containers/buildah/commit/6d5d1ae)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.12
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/3a0b52f)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.13
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/6bc611d)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.15
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/c7d828f)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.16
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/3ed5d8e)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.3-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.21
    (https://github.com/containers/buildah/commit/7f9540d)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.3-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.21
    (https://github.com/containers/buildah/commit/30a10f3)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.4-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.21
    (https://github.com/containers/buildah/commit/9c83683)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.21.0-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/42dbc97)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/f517d85)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-0.4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/56ff12f)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.22
    (https://github.com/containers/buildah/commit/71b8003)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.0-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.22
    (https://github.com/containers/buildah/commit/98960f2)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.22.3-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.22
    (https://github.com/containers/buildah/commit/4d20222)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.23.0-0.1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/a5aba5c)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.23.0-0.2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/e9bc224)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/69b3e56)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/753716a)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/f3f3c55)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/fb84638)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/b8757e9)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.6
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/a72aad4)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.7
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/9a49348)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.8
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/8548885)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.9
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/455f2f1)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.10
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/d2ef199)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.12
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/954c481)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.13
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/0cd9445)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.14
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/7807a0e)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.15
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/c044ad6)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.16
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/211972a)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.17
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/50869a7)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.24.0-0.18
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/982717a)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1.23.1-0.1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.23
    (https://github.com/containers/buildah/commit/87a0565)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1:1.23.1-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.23
    (https://github.com/containers/buildah/commit/867c1bc)
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1:1.23.2-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.23
    (https://github.com/containers/buildah/commit/83a66a7)
  - Related: #2001445


author: Lokesh Mandvekar <lsm5@redhat.com> - 1:1.24.2-2
changelog:
  - Add patch to fix bash symtax for gating tests
  - Upstream PR: https://github.com/containers/buildah/pull/3792
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.2-5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/9c456a3)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.3-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/d29224c)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.4-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/c1bdaba)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.4-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/63813ef)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.4-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/e99286b)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.5-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/83c5f26)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.5-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/8cc4586)
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.5-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/0ee422c)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.6-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/efed577)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.6-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/4198a78)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.6-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/1320eb7)
  - Related: #2129766


author: Jindrich Novy <jnovy@redhat.com> - 1:1.24.6-4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.24
    (https://github.com/containers/buildah/commit/60e6bc0)
  - Related: #2129766


author: Jindrich Novy <jnovy@redhat.com> - 1:1.27.2-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.27
    (https://github.com/containers/buildah/commit/13622b1)
  - Resolves: #2129767


author: Jindrich Novy <jnovy@redhat.com> - 1:1.27.2-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.27
    (https://github.com/containers/buildah/commit/c43a389)
  - Resolves: #2136438


author: Jindrich Novy <jnovy@redhat.com> - 1:1.27.2-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.27
    (https://github.com/containers/buildah/commit/5b86d15)
  - Resolves: #2150428


author: Jindrich Novy <jnovy@redhat.com> - 1:1.27.3-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.27
    (https://github.com/containers/buildah/commit/4785fdb)
  - Resolves: #2152017


author: Jindrich Novy <jnovy@redhat.com> - 1:1.28.2-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.28
    (https://github.com/containers/buildah/commit/7e4d9dd)
  - Resolves: #2136319


author: Jindrich Novy <jnovy@redhat.com> - 1:1.28.2-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.28
    (https://github.com/containers/buildah/commit/cfefbb6)
  - Resolves: #2140087


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-0.1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/8ca903b)
  - Resolves: #2140087


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-0.2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/39dfa73)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-0.3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/c541c35)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-0.4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/4b72f05)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-0.5
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/main
    (https://github.com/containers/buildah/commit/078a7ff)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.29.0
    (https://github.com/containers/buildah/commit/94b723c)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.29.0
    (https://github.com/containers/buildah/commit/)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-3
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.29
    (https://github.com/containers/buildah/commit/94b723c)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.0-4
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.29
    (https://github.com/containers/buildah/commit/c822cc6)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.1-1
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.29
    (https://github.com/containers/buildah/commit/7fa17a8)
  - Related: #2123641


author: Jindrich Novy <jnovy@redhat.com> - 1:1.29.1-2
changelog:
  - update to the latest content of https://github.com/containers/buildah/tree/release-1.29
    (https://github.com/containers/buildah/commit/f07d2c9)
  - Resolves: #2166195


author: Dan Walsh <dwalsh@redhat.com> 0.2.0-1.gitac2aad6
changelog:
  -   buildah run: Add support for -- ending options parsing 
  -   buildah Add/Copy support for glob syntax
  -   buildah commit: Add flag to remove containers on commit
  -   buildah push: Improve man page and help information
  -   buildah run: add a way to disable PTY allocation
  -   Buildah docs: clarify --runtime-flag of run command
  -   Update to match newer storage and image-spec APIs
  -   Update containers/storage and containers/image versions
  -   buildah export: add support
  -   buildah images: update commands
  -   buildah images: Add JSON output option
  -   buildah rmi: update commands
  -   buildah containers: Add JSON output option
  -   buildah version: add command
  -   buildah run: Handle run without an explicit command correctly
  -   Ensure volume points get created, and with perms
  -   buildah containers: Add a -a/--all option


author: Jindrich Novy <jnovy@redhat.com> - 1.5-4.gite94b4f9
changelog:
  - fix "CVE-2020-10696 buildah: crafted input tar file may lead to local file overwriting during image build process"
  - Resolves: #1818127


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to the version in FreeBSD CVS - it's actively maintained, unlike
    the 1993 4BSD version we used to have


author: Petr Machata <pmachata@redhat.com> - 1.9.20050813-1
changelog:
  - Thomas Dickey's 20050813 version of byacc:
    - own build system (linux patch reverted)
    - use tmpfile (security patch reverted)
  - Tidy up the specfile per rpmlint comments


author: Matthias Saou <http://freshrpms.net/> 1.9.20050813-2
changelog:
  - Update summary.
  - Remove useless doc copying in install section.
  - Add NOTES and NO_WARRANTY docs.


author: Petr Machata <pmachata@redhat.com> - 1.9.20100610-1
changelog:
  - Rebase to 20100610
  - Update the description in accordance with upstream spec template
  - Resolves: #643598


author: Petr Machata <pmachata@redhat.com> - 1.9.20111219-1
changelog:
  - Rebase to 20111219
    - add "-s" option
    - Resolves: #769237
  - Revert default stack size to 10000
    - Related: #743343


author: Rick L Vinyard Jr <rvinyard@cs.nmsu.edu> - 0.6.0-1
changelog:
  - New upstream version should fix the upstream issues like AUTHORS and README
  - Added pkgconfig to cairomm BuildRequires and cairomm-devel Requires
  - Replaced makeinstall
  - Fixed devel package description
  - Modified includedir syntax
  - docs included via the mv in install and in the devel files as html dir


author: Rick L Vinyard Jr <rvinyard@cs.nmsu.edu> - 1.1.10-1
changelog:
  - First release for cairo 1.2
  - Adjusted cairo dependencies for new version
  - Docs were in html, moved to reference/html


author: Rick L Vinyard Jr <rvinyard@cs.nmsu.edu> - 1.4.2-1
changelog:
  - New upstream release
  - Changed install to preserve timestamps
  - Removed mv of docs/reference and include files directly


author: Rick L Vinyard Jr <rvinyard@cs.nmsu.edu> - 1.9.1-1
changelog:
  - New upstream release
  - Removed html docs from -devel package
  - Seperated requires into one per line
  - Fixed devhelp docs


author: Haïkel Guémar <hguemar@fedoraproject.org> - 1.9.8-1
changelog:
  - upstream 1.9.8
  - fix issues with f15/rawhide (RHBZ #676878)
  - drop gtk-doc dependency (RHBZ #604169)


author: Kalev Lember <kalevlember@gmail.com> - 1.10.0-1
changelog:
  - Update to 1.10.0
  - Have the -doc subpackage depend on the base package
  - Modernize the spec file
  - Really own /usr/share/devhelp directory


author: Kalev Lember <klember@redhat.com> - 1.12.0-1
changelog:
  - Update to 1.12.0
  - Drop manual requires that are automatically handled by pkgconfig dep gen
  - Use license macro for COPYING
  - Tighten -devel subpackage deps with the _isa macro
  - Use make_install macro


author: Josh Stone <jistone@redhat.com> - 1.40.0-1
changelog:
  - Update to 1.40.0.
  - Fix compiletest with newer (local-rebuild) libtest
  - Build compiletest with in-tree libtest
  - Fix ARM EHABI unwinding


author: Josh Stone <jistone@redhat.com> - 1.51.0-1
changelog:
  - Update to 1.51.0. Update to 1.51.0. Includes security fixes for
    CVE-2021-28875 and CVE-2021-28877.


author: Josh Stone <jistone@redhat.com> - 1.52.1-1
changelog:
  - Update to 1.52.1. Includes security fixes for CVE-2020-36323,
    CVE-2021-28876, CVE-2021-28878, CVE-2021-28879, and CVE-2021-31162.


author: Peter Jones <pjones@redhat.com>
changelog:
  - updated package for alpha9.7, based on input from:
    Monty <xiphmont@xiph.org> 
    David Philippi <david@torangan.saar.de>


author: Peter Jones <pjones@redhat.com>
changelog:
  - update package to provide cdparanoia-alpha9.7-2.*.rpm and 
    cdparanoia-devel-alpha9.7-2.*.rpm.  Also, URLs point at xiph.org
    like they should.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Switched spec file from the one used in Red Hat Linux 6.2, which
    also changes the name
  - gzip man page


author: Peter Jones <pjones@redhat.com> alpha9.8-5
changelog:
  - make a -libs package which contains the .so files
  - make the cdparanoia dependancy towards that, not -devel


author: Peter Jones <pjones@redhat.com> alpha9.8-23
changelog:
  - "This time, with a meaningful changelog" release.  Just like -22.
  - new SG_IO code in rawhide.  This means ripping will no longer use the 
    "cooked ioctl" mode that it has since we moved to 2.6, instead utilizing
    the real scsi-based command set to talk to most drives.  This should
    result in better error correction handling, and usage of much more
    commonly used kernel features.
  - environment variable "CDDA_TRANSPORT" added.  If you set this to "cooked",
    cdparanoia will try to use the "cooked ioctl" mode instead of SCSI/SG_IO
    based modes first, and then fall back to SG_IO.
  - It'd be good if this got some testing.  A prior version of the SG_IO code
    was known to fail on some USB drives.  This version should mitigate that
    quite a bit, but I lack the hardware to test it for sure.


author: Adam Jackson <ajax@redhat.com> alpha9.8-29
changelog:
  - cdparanoia-III-alpha9.8.scsi-setspeed.patch: Allow setting the speed of
    SCSI CD drives. (#431178)


author: Adam Jackson <ajax@redhat.com> alpha9.8-30
changelog:
  - Add -Werror-implicit-function-declarations.
  - cdparanoia-III-alpha9.8-headers.patch: Fix the resulting errors.


author: Adam Jackson <ajax@redhat.com> 10.2-3
changelog:
  - cdparanoia-10.2-endian.patch: Backport a crash fix for host/drive
    endianness mismatch. (#466659)


author: Matthias Saou <http://freshrpms.net/> 10.2-6
changelog:
  - Fix all of the problems detected during the review which aren't acceptable
    according to the current policies and guidelines (part of #225638).
  - Don't prefix summaries with "A" nor suffix them with a dot.
  - Move .so symlink to the devel sub-package (#203620).
  - Add highest known version to the cdparanoia-III obsoletes.
  - Remove incorrect buildroot removal from %build.
  - Use acceptable %clean section.
  - Provide cdparanoia-static in the devel sub-package since the *.a is there.
  - Use single-command scriplet syntax for /sbin/ldconfig calls.
  - Escape all macros in changelog.
  - Include license file since it is present with the sources.


author: Peter Jones <pjones@redhat.com> - 10.2-8
changelog:
  - Incorporate changes from Matthias Saou:
  - Include install patch, to avoid all of the ugly manual installation.
  - Cosmetic fixes (libs group, scriplets, don't mix %name with hardcode...).


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - gtk-- does not wokr on the alpha, so we have no xcdrdao for it.
  - cheesy workaround for the broken tar archive


author: Tim Powers <timp@redhat.com>
changelog:
  - removed all references to xcdrdao, we don't ship it. So no applnk, no gtkmm
    requirements either.


author: Mike A. Harris <mharris@redhat.com> 1.1.5-1
changelog:
  - Updated to 1.1.5
  - Updated endianness patch for ia64
  - s/Copyright/License/ in specfile
  - Changed to bz2 compression for smaller sources
  - Fixed BuildRoot line (was hard coded)


author: Mike A. Harris <mharris@redhat.com> 1.1.5-2
changelog:
  - Bumped release and rebuilt so rawhide package doesn't release number
    conflict with previous 1.1.5-1 package built against 7.2


author: Denis Leroy <denis@poolshark.org> - 1.2.3-0.rc2.1
changelog:
  - Update to latest 1.2.3 release candidate
  - Merged with gcdmaster spec file
  - Added scripts to manage gcdmaster new schemas file
  - Moved desktop file fix into patch
  - Added patch to fix gcc 4.4 compile


author: Nikola Pajkovsky <npajkovs@redhat.com> - 1.2.3-4
changelog:
  - Merge review #225639
  - no need option --with-mp3-support. it needs libmad(don't ship)
  - change license to GPLv2+


author: Harald Hoyer <harald@redhat.com> - 1.1.6-4
changelog:
  - play stupid tricks, to let alternatives make the links and
    rpm not removing them afterwards
  - removed bogus warning for "." and ".."


author: Roman Rakus <rrakus@redhat.com> - 1.1.8-1
changelog:
  - Version 1.1.8 - old patches included
                  - added bzip2-devel to build requirements
  - fixed #171510 - preserve directory permissions


author: Roman Rakus <rrakus@redhat.com> - 1.1.9-6
changelog:
  - rename functions as they conflict with glibc
  - Don't push cdda2mp3 because we don't have any mp3 coder
    Resolves: #505918


author: Honza Horak <hhorak@redhat.com> 1.1.11-2
changelog:
  - fixed man page missing arguments (Resolves: #647024)
    https://bugzilla.redhat.com/show_bug.cgi?id=647024
  - fixed erroneous "Unknown file type (unallocated)" warning 
    (Resolves: #174667)
    https://bugzilla.redhat.com/show_bug.cgi?id=174667


author: Honza Horak <hhorak@redhat.com> - 1.1.11-4
changelog:
  - Library libusal is installed in order to be used by other apps
    (Resolves: #588508)
    https://bugzilla.redhat.com/show_bug.cgi?id=588508


author: Honza Horak <hhorak@redhat.com> - 1.1.11-12
changelog:
  - Use system cdparanoia instead of old bundled version
  - Build libusal as a shared library
  - Messages from rpmlint clean-up


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 1.1.11-18
changelog:
  - ported from cdda-paranoia to libcdio-paranoia, modified paranoia-cdda.patch
  - fixed bogus date in changelog


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 1.1.11-28
changelog:
  - libusal: added /dev/srN next to /dev/scdN path when scanning for devices
    added cdrkit-1.1.11-devname.patch
    bz#1053056


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 1.1.11-32
changelog:
  - FTBFS: <sys/sysmacros.h> included where "major" and "minor" macros are in use
    (cdrkit-1.1.11-sysmacros.patch added)
  - https://bugzilla.redhat.com/show_bug.cgi?id=1263599 - man page clarified
    (cdrkit-1.1.11-manpagefix.patch modified)


author: Petr Pisar <ppisar@redhat.com> - 1.1.11-35
changelog:
  - perl dependency renamed to perl-interpreter
    <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>


author: Nalin Dahyabhai <nalin@redhat.com> 0.5-1
changelog:
  - update to 0.5
    - packaging fixes
    - add a selfsign-getcert client
    - self-signed certs now get basic constraints and their own serial numbers
    - accept id-ms-kp-sc-logon as a named EKU value in a request


author: Nalin Dahyabhai <nalin@redhat.com> 0.6-1
changelog:
  - update to 0.6
    - man pages
    - 'getcert stop-tracking' actually makes the server forget now
    - 'getcert request -e' was redundant, dropped the -e option
    - 'getcert request -i' now sets the request nickname
    - 'getcert start-tracking -i' now sets the request nickname


author: Nalin Dahyabhai <nalin@redhat.com> 0.7-1
changelog:
  - update to 0.7
    - first cut at a getting-started document
    - refactor some internal key handling with NSS
    - check for duplicate request nicknames at add-time


author: Nalin Dahyabhai <nalin@redhat.com> 0.8-1
changelog:
  - update to 0.8
    - encode windows UPN values in requests correctly
    - watch for netlink routing changes and restart stalled submission requests
    - 'getcert resubmit' can force a regeneration of the CSR and submission


author: Nalin Dahyabhai <nalin@redhat.com> 0.9-1
changelog:
  - update to 0.9
    - run external submission helpers correctly
    - fix signing of signing requests generated for keys stored in files
    - only care about new interface and route notifications from netlink,
      and ignore notifications that don't come from pid 0
    - fix logic for determining expiration status
    - correct the version number in self-signed certificates


author: Nalin Dahyabhai <nalin@redhat.com> 0.11-1
changelog:
  - update to 0.11
    - add XML-RPC submission for certmaster and IPA
    - prune entries with duplicate names from the data store


author: Nalin Dahyabhai <nalin@redhat.com> 0.12-1
changelog:
  - update to 0.12
    - add a crucial bit of error reporting when CAs reject our requests
    - count the number of configured CAs correctly


author: Nalin Dahyabhai <nalin@redhat.com> 0.13-1
changelog:
  - update to 0.13
    - change the default so that we default to trying to auto-refresh
      certificates unless told otherwise
    - preemptively enforce limitations on request nicknames so that they
      make valid D-Bus object path components


author: Nalin Dahyabhai <nalin@redhat.com> 0.14-1
changelog:
  - update to 0.14
    - check key and certificate location at add-time to make sure they're
      absolute paths to files or directories, as appropriate
    - IPA: dig into the 'result' item if the named result value we're looking
      for isn't in the result struct


author: Nalin Dahyabhai <nalin@redhat.com> 0.15-1
changelog:
  - update to 0.15
    - notice that a directory with a trailing '/' is the same location as the
      directory without it
    - fix handling of the pid file when we write one (by actually giving it
      contents)


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-1
changelog:
  - update to 0.17
    - fix a hang in the daemon (Rob Crittenden)
    - documentation updates
    - fix parsing of submission results from IPA (Rob Crittenden)


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-2
changelog:
  - make the D-Bus configuration file (noreplace) (#541072)
  - make the %check section and the deps we have just for it conditional on
    the same macro (#541072)


author: Nalin Dahyabhai <nalin@redhat.com> 0.18-1
changelog:
  - update to 0.18
    - add support for using encrypted storage for keys, using PIN values
      supplied directly or read from files whose names are supplied
    - don't choke on NSS database locations that use the "sql:" or "dbm:"
      prefix


author: Nalin Dahyabhai <nalin@redhat.com> 0.19-1
changelog:
  - update to 0.19
    - correctly initialize NSS databases that need to be using a PIN
    - add certmonger.conf, for customizing notification timings and settings,
      and use of digests other than the previously-hard-coded SHA256, and
      drop those settings from individual requests
    - up the default self-sign validity interval from 30 days to 365 days
    - drop the first default notification interval from 30 days to 28 days
      (these two combined to create a fun always-reissuing loop earlier)
    - record the token which contains the key or certificate when we're
      storing them in an NSS database, and report it
    - improve handling of cases where we're supposed to use a PIN but we
      either don't have one or we have the wrong one
    - teach getcert to accept a PIN file's name or a PIN value when adding
      a new entry
    - update the IPA submission helper to use the new 'request_cert' signature
      that's landing soon
    - more tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.20-1
changelog:
  - update to 0.20
    - correctly parse certificate validity periods given in years (spotted by
      Stephen Gallagher)
    - setup for translation
      - es by Héctor Daniel Cabrera!
      - ru by Yulia Poyarkova!
      - uk by Yuri Chornoivan!
    - fix unpreprocessed defaults in certmonger.conf's man page
    - tweak the IPA-specific message that indicates a principal name also needs
      to be specified if we're not using the default subject name (#579542)
    - make the validity period of self-signed certificates into a configuration
      setting and not a piece of the state information we track about the signer
    - init script: exit with status 2 instead of 1 when invoked with an
      unrecognized argument (#584517)


author: Nalin Dahyabhai <nalin@redhat.com> 0.21-1
changelog:
  - update to 0.21
    - getcert/*-getcert: relay the desired CA to the local service, whether
      specified on the command line (in getcert) or as a built-in hard-wired
      default (in *-getcert) (#584983)
    - flesh out the default certmonger.conf so that people can get a feel for
      the expected formatting (Jenny Galipeau)


author: Nalin Dahyabhai <nalin@redhat.com> 0.22-1
changelog:
  - update to 0.22
    - new translations
      - de by Fabian Affolter!
    - certmaster-submit: don't fall over when we can't find a certmaster.conf
      or a minion.conf (i.e., certmaster isn't installed) (#588932)
    - when reading extension values from certificates, prune out duplicate
      principal names, email addresses, and hostnames


author: Nalin Dahyabhai <nalin@redhat.com> 0.23-1
changelog:
  - update to 0.23
    - new translations
      - pl by Piotr Drąg!
    - cancel daemon startup if we can't gain ownership of our well-known
      service name on the DBus (#596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-1
changelog:
  - update to 0.24
    - keep the lock on the pid file, if we have one, when we fork, and cancel
      daemon startup if we can't gain ownership of the lock (the rest of #596719)
    - make the man pages note which external configuration files we consult when
      submitting requests to certmaster and ipa CAs


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-2
changelog:
  - don't create the daemon pidfile until after we've connected to the D-Bus
    (still more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-3
changelog:
  - more gracefully handle manual daemon startups and cleaning up of unexpected
    crashes (still more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-4
changelog:
  - init script: ensure that the subsys lock is created whenever we're called to
    "start" when we're already running (even more of #596719)


author: Nalin Dahyabhai <nalin@redhat.com> 0.25-1
changelog:
  - update to 0.25
    - new translations
      - in by Okta Purnama Rahadian!
    - fix detection of cases where we can't access a private key in an NSS
      database because we don't have the PIN
    - teach '*getcert start-tracking' about the -p and -P options which the
      '*getcert request' commands already understand (#621670), and also
      the -U, -K, -E, and -D flags
    - double-check that the nicknames of keys we get back from
      PK11_ListPrivKeysInSlot() match the desired nickname before accepting
      them as matches, so that our tests won't all blow up on EL5
    - fix dynamic addition and removal of CAs implemented through helpers


author: Nalin Dahyabhai <nalin@redhat.com> 0.26-1
changelog:
  - update to 0.26
    - when canceling a submission request that's being handled by a helper,
      reap the child process's status after killing it (#624120)


author: Nalin Dahyabhai <nalin@redhat.com> 0.28-1
changelog:
  - update to 0.28
    - fix self-signing certificate notBefore and notAfter values on 32-bit
      machines


author: Nalin Dahyabhai <nalin@redhat.com> 0.29-1
changelog:
  - update to 0.29
    - fix 64-bit cleanliness issue using libdbus
    - actually include the full set of tests in tarballs


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-1
changelog:
  - update to 0.30
    - fix errors computing the time at the end of an interval that were
      caught by self-tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-2
changelog:
  - try to SIGHUP the messagebus daemon at first install so that it'll
    let us claim our service name if it isn't restarted before we are
    first started (#636876)


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-4
changelog:
  - explicitly require "dbus" to try to ensure we have a running system bus
    when we get started (#639126)


author: Nalin Dahyabhai <nalin@redhat.com> 0.32-1
changelog:
  - oops, rfc5280 says we shouldn't be populating unique identifiers, so
    make it a configuration option and default the behavior to off


author: Nalin Dahyabhai <nalin@redhat.com> 0.32-2
changelog:
  - depend on the e2fsprogs libuuid on Fedora and RHEL releases where it's
    not part of util-linux-ng


author: Nalin Dahyabhai <nalin@redhat.com> 0.33-1
changelog:
  - update to 0.33
    - new translations
      - id by Okta Purnama Rahadian!
    - updated translations
      - pl, uk
    - roll up assorted fixes for defects


author: Nalin Dahyabhai <nalin@redhat.com> 0.34-1
changelog:
  - update to 0.34
    - explicitly note the number of requests we're tracking in the output of
      "getcert list" (#652049)
    - try to offer some suggestions when we get certain specific errors back
      in "getcert" (#652047)
    - updated translations
      - es


author: Nalin Dahyabhai <nalin@redhat.com> 0.35.1-1
changelog:
  - fix a self-test that broke because one-year-from-now is now a day's worth
    of seconds further out than it was a few days ago


author: Nalin Dahyabhai <nalin@redhat.com> 0.36-1
changelog:
  - update to 0.36
    - fix some use-after-free bugs in the daemon (#689776)
    - fix a copy/paste error in certmonger-ipa-submit(8)
    - getcert now suppresses error details when not given its new -v option
      (#683926, more of #681641/#652047)
    - updated translations
      - de, es, pl, ru, uk
      - indonesian translation is now for "id" rather than "in"


author: Nalin Dahyabhai <nalin@redhat.com> 0.37-1
changelog:
  - update to 0.37
    - be more careful about checking if we can read a PIN file successfully
      before we even call an API that might need us to try (#688229)
    - fix strict aliasing warnings


author: Nalin Dahyabhai <nalin@redhat.com> 0.38-1
changelog:
  - update to 0.38
    - catch cases where we can't read a PIN file, but we never have to log
      in to the token to access the private key (more of #688229)


author: Nalin Dahyabhai <nalin@redhat.com> 0.39-1
changelog:
  - update to 0.39
    - fix use of an uninitialized variable in the xmlrpc-based submission
      helpers (#690886)


author: Nalin Dahyabhai <nalin@redhat.com> 0.40-1
changelog:
  - update to 0.40
    - fix validation check on EKU OIDs in getcert (#691351)
    - get session bus mode sorted
    - add a list of recognized EKU values to the getcert-request man page


author: Nalin Dahyabhai <nalin@redhat.com> 0.41-1
changelog:
  - read information about the keys we've just generated before proceeding
    to generating a CSR (part of #694184, part of #695675)
  - when processing a "resubmit" request from getcert, go back to key
    generation if we don't have keys yet, else go back to CSR generation as
    before (#694184, #695675)
  - configure with --with-tmpdir=/var/run/certmonger and own /var/run/certmonger
    (#687899), and add a systemd tmpfiles.d control file for creating
    /var/run/certmonger on Fedora 15 and later
  - let session instances exit when they get disconnected from the bus
  - use a lock file to make sure there's only one session instance messing
    around with the user's files at a time
  - fix errors saving certificates to NSS databases when there's already a
    certificate there with the same nickname (#695672)
  - make key and certificate location output from 'getcert list' more properly
    translatable (#7)


author: Nalin Dahyabhai <nalin@redhat.com> 0.42-1
changelog:
  - getcert: fix a buffer overrun preparing a request for the daemon when
    there are more parameters to encode than space in the array (#696185)
  - updated translations: de, es, id, pl, ru, uk


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - treat the ability to access keys in an NSS database without using a PIN,
    when we've been told we need one, as an error (#692766)
  - when handling "getcert resubmit" requests, if we don't have a key yet,
    make sure we go all the way back to generating one (#694184)
  - getcert: try to clean up tests for NSS and PEM file locations (#699059)
  - don't try to set reconnect-on-exit policy unless we managed to connect
    to the bus (#712500)
  - handle cases where we specify a token but the storage token isn't
    known (#699552)
  - getcert: recognize -i and storage options to narrow down which requests
    the user wants to know about (#698772)
  - output hints when the daemon has startup problems, too (#712075)
  - add flags to specify whether we're bus-activated or not, so that we can
    exit if we have nothing to do after handling a request received over
    the bus if some specified amount of time has passed
  - explicitly disallow non-root access in the D-Bus configuration (#712072)
  - migrate to systemd on releases newer than Fedora 15 or RHEL 6 (#718172)
  - fix a couple of incorrect calls to talloc_asprintf() (#721392)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - if xmlrpc-c's struct xmlrpc_curl_xportparms has a gss_delegate field, set
    it to TRUE when we're doing Negotiate auth (#727864, #727863, #727866)


author: Nalin Dahyabhai <nalin@redhat.com> 0.44-1
changelog:
  - check specifically for cases where a specified token that we need to
    use just isn't present for whatever reason (#697058)


author: Nalin Dahyabhai <nalin@redhat.com> 0.46-1
changelog:
  - treat the ability to access keys in an NSS database without using a PIN,
    when we've been told we need one, as an error (#692766, really this time)


author: Nalin Dahyabhai <nalin@redhat.com> 0.47-1
changelog:
  - getcert: distinguish between {stat() succeeds but isn't a directory} and
    {stat() failed} when printing an error message (#739903)
  - getcert resubmit/start-tracking: when we're looking for an existing request
    by ID, and we don't find one, note that specifically (#741262)


author: Nalin Dahyabhai <nalin@redhat.com> 0.49-1
changelog:
  - when using an NSS database, skip loading the module database (#743042)
  - when using an NSS database, skip loading root certs
  - generate SPKAC values when generating CSRs, though we don't do anything
    with SPKAC values yet
  - internally maintain and use challenge passwords, if we have them
  - behave better when certificates have shorter lifetimes
  - add/recognize/handle notification type "none"
  - getcert: error out when "list -c" finds no matching CA (#743488)
  - getcert: error out when "list -i" finds no matching request (#743485)


author: Nalin Dahyabhai <nalin@redhat.com> 0.50-1
changelog:
  - really fix these this time:
   - getcert: error out when "list -c" finds no matching CA (#743488)
   - getcert: error out when "list -i" finds no matching request (#743485)


author: Nalin Dahyabhai <nalin@redhat.com> 0.51-1
changelog:
  - api: lift restrictions on characters used in request and CA nicknames by
    making their object names not incorporate their nicknames
  - api: add find_request_by_nickname and find_ca_by_nickname
  - certmonger-ipa-submit.8: list -k, -K, -t in the summary, document -K
  - getcert: print "invalid option" error messages ourselves (#756291)
  - ipa-submit: supply a Referer: header when submitting requests to IPA
    (#750617, needed for #747710)


author: Nalin Dahyabhai <nalin@redhat.com> 0.52-1
changelog:
  - note that SELinux usually confines us to writing only to cert_t in
    doc/getting-started.txt (#765599)
  - fix crashes when we add a request during our first run when we're
    populating the hard-coded CA list
  - properly deal with cases where a path is passed to us is "./XXX"
  - in session mode, create our data directories as we go


author: Nalin Dahyabhai <nalin@redhat.com> 0.53-1
changelog:
  - large changes to the D-Bus glue, exposing a lot of data which we were
    providing via D-Bus getter methods as properties, and providing more
    accurate introspection data
  - emit a signal when the daemon saves a certificate to the destination
    location, and provide an option to have the daemon spawn an arbitrary
    command at that point, too (#766167)
  - enable starting the service by default on RHEL (#765600)


author: Nalin Dahyabhai <nalin@redhat.com> 0.55-1
changelog:
  - allow root to use our implementation of org.freedesktop.DBus.Properties
  - take more care to not emit useless PropertiesChanged signals


author: Nalin Dahyabhai <nalin@redhat.com> 0.56-1
changelog:
  - when a caller sets the is-default flag on a CA, and another CA is no longer
    the default, emit the PropertiesChanged signal on the CA which is not the
    default, instead on the new default a second time
  - drop some dead code from the D-Bus message handlers (static analysis,
    - cache public keys when we read private keys
  - go back to printing an error indicating that we're missing a required
    argument when we're missing a required argument, not that the option is
    invalid (broken since 0.51, #796542)


author: Nalin Dahyabhai <nalin@redhat.com> 0.57-1
changelog:
  - clarify that the command passed to getcert -C is a "post"-save command
  - add a "pre"-save command option to getcert, specified with the -B flag (#9)
  - after we notify of an impending not-valid-after approaching, don't do it
    again immediately


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a command option (-T) to getcert for specifying which enrollment
    profile to tell a CA that we're using, in case it cares (#10)


author: Nalin Dahyabhai <nalin@redhat.com> 0.58-1
changelog:
  - add a "dogtag-ipa-renew-agent" CA so that we can renew certificates using
    an IPA server's internal Dogtag instance
  - export the requested profile and old certificate to enrollment helpers
  - make libxml and libcurl into hard build-time requirements
  - serialize all pre/save/post sequences to make sure that stop/save/start
    doesn't become stop1/save1/stop2/start1/save2/start2 when we're stopping
    a service while we muck with more than one of its certificates


author: Nalin Dahyabhai <nalin@redhat.com> 0.60-1
changelog:
  - adjust internals of logic for talking to dogtag to at least have a
    concept of non-agent cases
  - when talking to an IPA server's internal Dogtag instance, infer which
    ports the CA is listening on from the "dogtag_version" setting in the
    IPA configuration (Ade Lee)
  - send a notification (or log a message, whatever) when we save a new
    certificate (#766167)


author: Nalin Dahyabhai <nalin@redhat.com> 0.61-1
changelog:
  - fix a regression in reading old request tracking files where the
    request was in state NEED_TO_NOTIFY or NOTIFYING


author: Nalin Dahyabhai <nalin@redhat.com> 0.61-3
changelog:
  - backport change from git to not choke if X509_REQ_to_X509() fails when we're
    self-signing using OpenSSL
  - backport another change from git to represent this as a CA-rejected error


author: Nalin Dahyabhai <nalin@redhat.com> 0.62-1
changelog:
  - add a -u flag to getcert to enable requesting a keyUsage extension value
  - request subjectKeyIdentifier extensions from CAs, and include them in
    self-signed certificates
  - request basicConstraints from CAs, defaulting to requests for end-entity
    certificates
  - when requesting CA certificates, also request authorityKeyIdentifier
  - add support for requesting CRL distribution point and authorityInfoAccess
    extensions that specify OCSP responder locations
  - don't crash when OpenSSL can't build a template certificate from a request
    when we're in FIPS mode
  - put NSS in FIPS mode, when the system booted that way, except when we're
    trying to write certificates to a database
  - fix CSR generation and self-signing in FIPS mode with NSS
  - fix self-signing in FIPS mode with OpenSSL
  - new languages from the translation team: mai, ml, nn, ga


author: Nalin Dahyabhai <nalin@redhat.com> 0.63-1
changelog:
  - serialize access to NSS databases and the running of pre- and post-save
    commands which might also access them (possibly fixing part of #883484)


author: Nalin Dahyabhai <nalin@redhat.com> 0.64-1
changelog:
  - at startup, if we resume the state machine for a given certificate to a state
    which expects to have the newly-added lock already acquired, acquire it
    before moving on with the certificate's work (still aimed at fixing #883484)


author: Nalin Dahyabhai <nalin@redhat.com> 0.66-1
changelog:
  - build as position-independent executables with early binding (#883966)
  - also don't tag the unit file as a configuration file (internal tooling)


author: Nalin Dahyabhai <nalin@redhat.com> 0.67-1
changelog:
  - when saving certificates to NSS databases, try to preserve the trust
    value assigned to a previously-present certificate with the same nickname
    and subject, if one is found
  - when saving certificates to NSS databases, also prune certificates from
    the database which have both the same nickname and subject as the one
    we're adding, to avoid tripping up tools that only fetch one certificate
    by nickname


author: Nalin Dahyabhai <nalin@redhat.com> 0.67-3
changelog:
  - pull up a patch from master to adapt self-tests to certutil's diagnostic
    output having changed (#992050)


author: Nalin Dahyabhai <nalin@redhat.com> 0.68-1
changelog:
  - notice when the OpenSSL RNG isn't seeded
  - notice when saving certificates or keys fails due to filesystem-related
    permission denial (#996581)


author: Nalin Dahyabhai <nalin@redhat.com> 0.69-1
changelog:
  - tweak how we decide whether we're on the master or a minion when we're
    told to use certmaster as a CA
  - clean up one of the tests so that it doesn't have to work around internal
    logging producing duplicate messages
  - when logging errors while setting up to contact xmlrpc servers, explicitly
    note that the error is client-side
  - don't abort() due to incorrect locking when an attempt to save an issued
    certificate to the designated location fails (part of #1032760/#1033333,
    ticket #22)
  - when reading an issued certificate from an enrollment helper, ignore
    noise before or after the certificate itself (more of #1032760/1033333,
    ticket #22)
  - run subprocesses in a cleaned-up environment (more of #1032760/1033333,
    ticket #22)
  - clear the ca-error that we saved when we had an error talking to the CA if we
    subsequently succeed in talking to the CA
  - various other static-analysis fixes


author: Nalin Dahyabhai <nalin@redhat.com> 0.70-1
changelog:
  - add a --with-homedir option to configure, and use it, since subprocesses
    which we run and which use NSS may attempt to write to $HOME/.pki, and
    0.69's strategy of setting that to "/" was rightly hitting SELinux policy
    denials (#1047798)


author: Nalin Dahyabhai <nalin@redhat.com> 0.71-1
changelog:
  - check for cases where we fail to allocate memory while reading a request
    or CA entry from disk (John Haxby)
  - only handle one watch at a time, which should avoid abort() during
    attempts to reconnect to the message bus after losing our connection
    to it (#1055521)


author: Nalin Dahyabhai <nalin@redhat.com> 0.72-1
changelog:
  - update to 0.72
    - support generating DSA parameters and keys on sufficiently-new OpenSSL
      and NSS
    - support generating EC keys when OpenSSL and NSS support it, using key
      size to select the curve to use from among secp256r1, secp384r1,
      secp521r1 (which are the ones that are usually available, though
      secp521r1 isn't always, even if the other two are)
    - stop trying to cache public key parameters at all and instead cache public
      key info properly
    - encode the friendlyName attribute in signing requests as a BMPString,
      not as a PrintableString
    - catch more filesystem permissions problems earlier (more of #996581)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - updates for 0.73
    - set the flag to encode EC public key parameters using named curves
      instead of the default of all-the-details when using OpenSSL
    - don't break when NSS supports secp521r1 but OpenSSL doesn't
    - also pass the CA nickname to enrollment helpers in the environment as
      a text value in "CERTMONGER_CA_NICKNAME", so they can use that value
      when reading configuration settings
    - also pass the SPKAC value to enrollment helpers in the environment as
      a base64 value in "CERTMONGER_SPKAC"
    - also pass the request's SubjectPublicKeyInfo value to enrollment helpers
      in the environment as a base64 value in "CERTMONGER_SPKI" (part of #16)
    - when generating signing requests using NSS, be more accommodating of
      requested subject names that don't parse properly


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - updates to 0.73
    - also pass the key type to enrollment helpers in the environment as
      a the value of "CERTMONGER_KEY_TYPE"


author: Nalin Dahyabhai <nalin@redhat.com> 0.73-1
changelog:
  - updates to 0.73
    - getcert no longer claims to be stuck when a CA is unreachable,
      because the daemon isn't actually stuck


author: Nalin Dahyabhai <nalin@redhat.com> 0.74-1
changelog:
  - also save state when we exit due to SIGHUP
  - don't get tripped up when enrollment helpers hand us certificates which
    include CRLF line terminators (ticket #25)
  - be tolerant of certificate issuer names, subject names, DNS, email, and
    Kerberos principal namem subjectAltNames, and crl distribution point URLs
    that contain newlines
  - read and cache the certificate template extension in certificates
  - enforce different minimum key sizes depending on the type of key we're
    trying to generate
  - store DER versions of subject, issuer and template subject, if we have
    them (Jan Cholasta, ticket #26)
  - when generating signing requests with subject names that don't quite parse
    as subject names, encode what we're given as PrintableString rather than
    as a UTF8String
  - always chdir() to a known location at startup, even if we're not becoming
    a daemon
  - fix a couple of memory leaks (static analysis)
  - add missing buildrequires: on which


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.92-1
changelog:
  - retrieve CA information from CAs, if the helpers can do so, and
    add a command to explicitly refresh that data: "getcert refresh-ca"
  - offer to save CA certificates to files and databases, when specified with
    new -a and -F flags to getcert request/resubmit/start-tracking (#1098208,
    trac #31)
  - add IP address subject alternate names when getcert request/resubmit
    is passed the -A option (trac #35)
  - read and cache the freshestCRL extension in certificates
  - properly interpret KDC-unreachable errors encountered in the IPA
    submission error as a server-unreachable error that we will retry,
    rather than a misconfiguration error which we won't
  - don't let tests get tripped up by new formatting used in dos2unix status
    messages (#1099080)
  - updated translations
  - be explicit that we are going to use bashisms in test scripts by calling
    the shell interpreter as 'bash' rather than 'sh' (trac #27)


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.93-1
changelog:
  - add some self-tests
  - simplify the internal submit-to-CA logic
  - fixes for more problems found through static analysis


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.94-1
changelog:
  - fix self-test errors that we trigger with new OpenSSL
  - fix a build error that would sometimes happen when we're told to
    build PIE binaries
  - quiet a compile warning


author: Nalin Dahyabhai <nalin@redhat.com> 0.74.96-1
changelog:
  - make the trust settings we apply to CA-supplied certificates while
    saving them to NSS databases run-time configurable
  - fix compiling against EL5-era OpenSSL
  - when saving CA certificates we pull from an IPA server, nickname
    it using the realm name with " IPA CA" appended rather than just
    naming it "IPA CA"
  - fix the local signer so that when it issues itself a new certificate,
    it uses the same subject name
  - add a -w flag to getcert's request, resubmit, and start-tracking
    commands, telling it to wait until either the certificate is issued,
    we get to a state where we know that we won't be able to get one, or
    we are waiting for a CA


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-1
changelog:
  - add a -w (wait) flag to the getcert's request/resubmit/start-tracking
    commands, and add a non-waiting status command


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.2-1
changelog:
  - when generating keys using OpenSSL, if key generation fails, try
    again with the default key size, in case we're in FIPS mode
  - documentation updates


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.3-1
changelog:
  - read and cache whether or not we saw a noOCSPcheck extension in certificates
  - documentation updates


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.4-2
changelog:
  - add a %trigger to remove knowledge of the "dogtag-ipa-renew-agent" CA
    when we detect certmonger versions prior to 0.58 being installed, to
    avoid cases where some older versions choke on CAs with nicknames that
    contain characters that can't legally be part of a D-Bus name (#948993)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.6-1
changelog:
  - avoid potential use-after-free and read overrun after a CA is added
    dynamically (thanks to Jan Cholasta)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.7-1
changelog:
  - fix an inconsistency in how we parse cookie values returned by CA helpers,
    in that single-line values would lose the end-of-line after a daemon
    restart, but not before
  - handle timeout values and exit status values when calling CA helpers
    in non-SUBMIT, non-POLL modes (#1118468)
  - rework how we save CA certificates so that we save CA certificates associated
    with end-entity certificates when we save that end-entity certificate, which
    requires running all of the involved pre- and post-save commands
  - drop package Requires: on systemd-sysv (#1104138)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.7-2
changelog:
  - reintroduce package Requires: on systemd-sysv on F19 and EL6 and older,
    conditionalized it so that it's ignored on newer releases, and make
    whether or not we call systemd-sysv-convert in triggers depend on that,
    too (#1104138)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.8-1
changelog:
  - add a 'refresh' option to the getcert command
  - add a '-a' flag to the getcert command's 'refresh-ca' option


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.9-1
changelog:
  - avoid potential use-after-free after a CA is removed dynamically (thanks to
    Keenan Brock) (#1125342)
  - add a "external-helper" property to CA objects


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.10-1
changelog:
  - when attempting to contact an IPA LDAP server, if no "ldap_uri" is set in
    default.conf, and no "host" is set either, try to construct the server URI
    using the "server" setting (#1126985)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.11-1
changelog:
  - when getcert is passed a -a flag, to indicate that CA root certificates
    should be stored in the specified database, don't ignore locations which
    don't include a storage scheme (#1129537)
  - when called to 'start-tracking' with the -a or -F flags, if we have
    applicable certificates on-hand for a CA that we're either told to use
    or which we decide is the correct one, save the certificates (#1129696)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.12-1
changelog:
  - correct encoding/decoding of variant-typed data which we receive and send
    as part of the org.freedesktop.DBus.Properties interface over the bus, and
    add some tests for them (based on patch from David Kupka, ticket #36)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75.14-1
changelog:
  - make pathname canonicalization slightly smarter, to handle ".." in
    locations (#1131758)
  - updates to self-tests (#1144082)


author: Nalin Dahyabhai <nalin@redhat.com> 0.76-1
changelog:
  - require a single certificate to be specified to 'getcert status' (#1148001,
    - shorten the default help message which getcert prints when it's not given
    a specific command (#1131704)
  - add private listener (-l, -L, -P) mode to certmonger, to allow it to listen
    for connections directly from clients running under the same UID
  - add a command mode (-c) to certmonger, in which once it's started, it
    launches a specified command, and after that command exits, the daemon exits
  - when getcert is invoked with no bus running, if it's running as root, run
    certmonger in private listener mode with the same invocation of getcert as
    the command to start and wait for (#1134497)


author: Nalin Dahyabhai <nalin@redhat.com> 0.76.2-1
changelog:
  - ipa-submit: when we fail to locate/contact LDAP or XML-RPC servers,
    use discovery to find them (#1136900)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - rework the state machine so that we save an issued certificate's associated
    CA certificates, then re-read the certificate, then run the post hook and
    issue notifications, in that order, instead of saving CA certificates after
    running the post hook, which was always a surprising order (#1131700)
  - add a generic dogtag-submit helper that doesn't include any IPA defaults,
    to make it easier to know the difference between paramenters it requires
    and parameters which are optional (#12)


author: Nalin Dahyabhai <nalin@redhat.com> 0.76.3-1
changelog:
  - fixes for bugs found by static analysis
  - handle IDN correctly when doing service location using SRV records
  - documentation updates


author: Nalin Dahyabhai <nalin@redhat.com> 0.76.5-1
changelog:
  - avoid premature exit on CA data analysis failures (should fix an issue
    reported by Natxo Asenjo)


author: Nalin Dahyabhai <nalin@redhat.com> 0.76.7-1
changelog:
  - correctly read CA not-valid-after dates on 32-bit machines (also reported by
    Natxo Asenjo), so that we don't spin on polling them (#1163023)


author: Nalin Dahyabhai <nalin@redhat.com> 0.76.8-1
changelog:
  - dogtag-submit: accept additional options to pass to the server when
    approving requests using agent creds (#1165155, patch by Jan Cholasta)
  - getcert: print help output when 'status' isn't given any args (#1163541)


author: Nalin Dahyabhai <nalin@redhat.com> 0.77.1-1
changelog:
  - update to 0.77
    - add initial, still rough, SCEP support (#1140241,#1161768)
      - add an scep-submit helper to handle part of it
    - getcert: add add-ca/add-scep-ca/modify-ca/remove-ca commands
    - getcert: add -l, -L flags to request/resubmit/start-tracking commands
      to provide a way to set a ChallengePassword in signing requests
    - lay some groundwork for rekeying support
    - bundled dogtag enrollment helpers now output debugging info to stderr (#)
    - ipa-getcert: fix a crash when using DNS discovery to locate servers (#39)
    - getcert: fix displaying of pre-request pre-/post-save commands (#1178190,
        - use Zanata for translations
    - getcert list: list the certificate's profile name, if it contains one


author: Nalin Dahyabhai <nalin@redhat.com> 0.77.2-1
changelog:
  - expose the certificate's not-valid-before and not-valid-after dates as a
    property over D-Bus (ticket #41)
  - give the local signer its own configuration option to set the lifetime
    of its signing certificate, falling back to the lifetime configured for
    the self-signer as a default to match the previous behavior
  - fix a potential read segfault parsing the output of an enrollment helper,
    introduced in 0.77 (thanks to Steve Neuharth)
  - read the ns-certtype extension value in certificates
  - request an enrollment certtype extension to CSRs if we have a profile name
    that we want to use (ticket #17, possibly part of IPA ticket #57)


author: Nalin Dahyabhai <nalin@redhat.com> 0.77.3-1
changelog:
  - fix a data loss bug when saving renewed certificates to NSS databases - the
    private key could be removed in error since 0.77
  - fixes for bugs found by static analysis
  - fix self-tests when built with OpenSSL 1.0.2


author: Nalin Dahyabhai <nalin@redhat.com> 0.77.4-1
changelog:
  - don't display PINs in "getcert list" output (#42)
  - clean up launching of a private instance in "getcert"
  - expand on the don't-delete-private-key fix from 0.77.3 by letting NSS's
    own safety checks have an effect
  - backport record-keeping of key generation dates and counts of how many
    times we've gotten certificates using a given key pair


author: Nalin Dahyabhai <nalin@redhat.com> 0.77.5-1
changelog:
  - pass $CERTMONGER_REQ_IP_ADDRESS to enrollment helpers if the signing request
    includes IP address subjectAltName values
  - correctly verify signatures on SCEP server replies when the signer is neither
    the top-level CA nor the RA (feedback in #1161768)
  - correctly verify signatures on SCEP server replies when there is more than
    one certificate in the chain between the RA and the top-level CA (feedback in


author: Nalin Dahyabhai <nalin@redhat.com> 0.78-1
changelog:
  - switch to using popt for parsing command line arguments, continuing to
    use old help text for now so that we can catch up with translations (print
    old text for --help, new text (with longopts!) for -H)
  - add some plumbing for eventually receiving per-certificate roots in
    addition to issued certificates and chain certificates
  - add a "rekey" command to getcert, for triggering enrollment using a new
    key pair (#1087932)
  - scep-submit: check for the Renewal capability, and default to taking
    advantage of it during rekeying, unless the new -n flag is specified to it
  - dogtag-submit: add flags for passing user names, UDNs, passwords, and PINs
    to the helper (part of ticket #12)
  - dogtag-submit: add a flag for using the agent creds to do TLS client auth
    while submitting enrollment requests (more of ticket #12)
  - dogtag-submit: handle cases where we submit a request and the server
    returns a success code rather than just queuing the request (#12 again)
  - ipa-submit: pass requested profile names to the server as an argument
    named "profile_id"; if the server gives us an "unrecognized argument"
    error, retry without it for compatibility's sake (part of IPA ticket #57)
  - keygen: fix a possible crash if keygen fails to return a key from NSS
  - correct the certmonger(8) man page's description of the -c flag, which it
    used to call the -C flag
  - add logic for setting ownership and permissions on certificates and keys
    when saving them to disk
  - add configuration options "max_key_lifetime" and "max_key_use_count" for
    making automatic renewal prefer rekeying


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.1-1
changelog:
  - self-tests: assume that certutil won't generate DSA keys with more than 1024
    bits, and will often short us by a few


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.2-1
changelog:
  - tweak initialization so that we set up for providing our D-Bus API before we
    register our name with the bus, so that we can handle any requests that
    arrive before the acknowledgement of that registration
  - on systems that run systemd, add the right data file so that the service gets
    started when someone tries to talk to the daemon (ticket #38)
  - correctly check for error responses when sending GetCAChain requests to SCEP
    servers


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.3-1
changelog:
  - call poptGetOptArg() correctly, to fix parsing of the -R flag to scep-submit
    and the -O and -o flags to dogtag-submit (#1244914)


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.4-1
changelog:
  - fix the "getcert start-tracking" -L and -l options (#1249753)
  - output diagnostics about the second request when scep-submit encounters an
    error during a second request to the SCEP server


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.5-1
changelog:
  - fix a possible uninitialized memory read (possibly #1260871)
  - log a diagnostic error when we fail to initialize libkrb5


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.6-1
changelog:
  - document the -R, -N, -o, and -t flags for dogtag-ipa-renew-agent-submit
  - stop checking that we can generate 512 bit keys during self-tests


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.6-3
changelog:
  - instead of using killall to send a SIGHUP to the system bus daemon in %post
    to get it to reload its configuration, use dbus-send to send a ReloadConfig
    request over the bus (should fix #1277573)


author: Nalin Dahyabhai <nalin@redhat.com> 0.78.6-4
changelog:
  - add backported fix to wait a reasonable amount of time after calling the
    'resubmit' method for a new certificate to be issued when we're exercising
    the D-Bus API during tests (Jan Cholasta, #1351052)


author: Nalin Dahyabhai <nalin@redhat.com> 0.79-1
changelog:
  - update to 0.79:
    - getcert now offers an option (-X) for requesting processing by a particular
      CA if the server we're contacting is running more than one
    - getcert also offers options (--for-ca, --not-for-ca, --ca-path-length) for
      requesting BasicConstraints values
    - getcert now displays times in local time instead of UTC, which was
      previously the only way they were displayed; the --utc option can often be
      used to switch back to its previous behavior
    - the SCEP enrollment helper now correctly issues GetCACertChain requests to
      SCEP servers, instead of issuing a GetCAChain request, which isn't part of
      the protocol; from report by Jason Garland
    - when issuing SCEP requests, the ID of the CA included in the HTTP request
      is now URL-encoded, as it should be
    - renewal or notification-of-impending-expiration logic is now triggered
      closer to TTL thresholds rather than waiting for a periodic check to pass a
      threshold
    - properly builds with OpenSSL 1.1, thanks to Lukas Slebodnik and Tomas Mraz
      for a lot of the legwork
  - resync .spec file with Fedora
  - upstream project migrated from fedorahosted.org to pagure.io


author: Rob Crittenden <rcritten@redhat.com> 0.79.4-1
changelog:
  - update to 0.79.4
    - fix CA option name for ipa cert-request
    - fix minor memory leak
    - fix build warnings
    - fix an incorrect date in the .spec changelog
    - bump gettext version to avoid warning


author: Rob Crittenden <rcritten@redhat.com> 0.79.4-2
changelog:
  - Reformat certificates returned by Dogtag. Dogtag was including
    a spurious newline before -----END CERTIFICATE-----


author: Rob Crittenden <rcritten@redhat.com> 0.79.5-1
changelog:
  - update to 0.79.5:
     - getcert start-tracking: use issuer option when specified
     - add support for specifying the MS certificate template
     - Reformat certificates returned by Dogtag to strip extra newline


author: Rob Crittenden <rcritten@redhat.com> 0.79.5-3
changelog:
  - Remove BR on mktemp. It is now provided by coreutils.
  - Patch to fix NSS handling of keys in sqlite databases
  - Patches to fix tests now that sqlite is the NSS default.


author: Rob Crittenden <rcritten@redhat.com> - 0.79.6-4
changelog:
  - Improve handling of NSS tokens (#1624930)
  - Pull in upstream fixes discovered in coverity and clang (#1632449)


author: Rob Crittenden <rcritten@redhat.com> - 0.79.7-4
changelog:
  - Optimize closing of file descriptors on fork (#1763745)
  - Remove NOMODDB flag flag from context init, look for full tokens (#1746543)
  - Retrieve full IPA CA chain (#1710632)


author: Rob Crittenden <rcritten@redhat.com> - 0.79.7-8
changelog:
  - Move systemd tmpfiles from /var/run to /run (#1804928)
  - Improve logging in the SCEP helper (#1807691)
  - Fix sort order of certificates passed into PKCS7_verify (#1808052)
  - Add -N option to SCEP helper to separate web server chain from
    SCEP issuer chain (#1808613)
  - Add template profile, MS v2 template and issuer to getcert list
    output (#1734451)


author: Rob Crittenden <rcritten@redhat.com> - 0.79.7-9
changelog:
  - Call the secport equivalent of PR_ErrorToString
  - Remove a couple of unused varaibles found by coverity


author: Rob Crittenden <rcritten@redhat.com> - 0.79.7-15
changelog:
  - Replace the previous fix for dbus restarting with PartOf in the
    certmonger systemd service file to link the two (#1687698)


author: Rob Crittenden <rcritten@redhat.com> - 0.79.13-4
changelog:
  - Certmonger SCEP renewal should not use old challenges (#1577570)
  - Certmonger segfault after cert renewal request (#1881500)
  - Include certificate NotBefore date in output of the 'getcert list' command
    (#1940261)
  - Certmonger certificates stuck in NEED_GUIDANCE (#2001079)


author: Rob Crittenden <rcritten@redhat.com> - 0.79.13-5
changelog:
  - certmonger creates CSRs with invalid DER syntax for X509v3 extensions
    with critical=FALSE (#2012258)


author: Rob Crittenden <rcritten@redhat.com> - 0.79.17-1
changelog:
  - Update to upstream 0.79.17 (#2139523)
  - Certificate format validation when adding the SCEP server's CA (#2150025)
  - Certmonger SCEP renewal should not use old challenges (#2150030)
  - certmonger SEGV during rekey in FIPS mode (#2150070)


author: Jerry James <loganjerry@gmail.com> - 0.9.5-3
changelog:
  - Fix unowned directory (bz 473635)
  - Drop unnecessary BuildRequires
  - Replace patches with addition of -fPIC to CFLAGS in the spec file
  - Add some more documentation files


author: Jerry James <loganjerry@gmail.com> - 0.9.10-3
changelog:
  - Drop -format patch, upstreamed
  - Fix detection of more time-related functions
  - Give checkmk its own subpackage for licensing reasons
  - Add a check script


author: Jerry James <loganjerry@gmail.com> - 0.9.14-1
changelog:
  - New upstream version
  - Drop -volatile patch, no longer needed
  - Update time-related configure fix again


author: Jerry James <loganjerry@gmail.com> - 0.15.0-1
changelog:
  - Version 0.15.0
  - Add -formatspec and -attribute-format patches
  - Build with both cmake and autotools


author: Alexander Larsson <alexl@redhat.com> - 1:2.91.93-3
changelog:
  - Move gsettings schema to cheese-libs, fixes control-center crash (#691667)
  - Move typelib to cheese-libs


author: Hans de Goede <hdegoede@redhat.com> - 2:3.5.1-2
changelog:
  - Fix missing images on buttons, also fixes the "Gtk-WARNING **: Attempting to
    add a widget with type GtkImage to a GtkButton ..." warnings (gnome#677543)
  - Fix cheese crashing when started on machines with v4l2 radio or vbi devices
    (rhbz#810429, gnome#677544)


author: Hans de Goede <hdegoede@redhat.com> - 2:3.4.2-3
changelog:
  - Reduce camerabin pipeline creation time (rhbz#797188, gnome#677731)
  - Don't add 0 byte sized files to the thumb-view (rhbz#830166, gnome#677735)
  - Fix sizing of horizontal thumbnail list (rhbz#829957)
  - Optimize encoding parameters (rhbz#572169)


author: Hans de Goede <hdegoede@redhat.com> - 2:3.5.5-1
changelog:
  - New upstream release 3.5.5
  - Fix cheese crashing on tvcards which report they can capture 0x0 as
    minimum resolution (rhbz#850505)


author: Hans de Goede <hdegoede@redhat.com> - 2:3.9.2-2
changelog:
  - Fix cheese-introduction.png being in both cheese and cheese-libs (#893756)
  - Put the COPYING file in the docs for cheese-libs (#893800)


author: Hans de Goede <hdegoede@redhat.com> - 2:3.9.91-3
changelog:
  - In F-19 we had a long list of bugfix patches, most of these have been merged
    into gnome-3.10 but not all have been merged yet, re-add the non merged ones
  - Fix video recording not working
  - Allow changing effects while recording
  - Disallow changing camera settings while recording
  - Fix cheese misbehavior when going from 0 -> 1 or 1 -> 0 camera devices


author: David King <amigadave@amigadave.com> - 2:3.13.92-1
changelog:
  - Update to 3.13.92
  - Split camera service out to a subpackage
  - Use pkgconfig for BuildRequires
  - Tidy spec file


author: <thalman@redhat.com> - 0.6.1-4
changelog:
  - CVE-2023-37464 cjose: AES GCM decryption uses the Tag length from the actual
    Authentication Tag provided in the JWE
    Resolves: rhbz#2223308


author: Tomas Orsava <torsava@redhat.com> - 6.0.1-6
changelog:
  - Change Requires from python3 to platform-python
  - The python3 package was renamed to platform-python
  - Related: rhbz#1619153


author: chenli <chenli@loongson.cn> - 13.0.1-2.0.2
changelog:
  - [LoongArch] Define subtarget feature unaligned-access                           
  - [compiler-rt] Support LoongArch64


author: Chen Li <chenli@loongson.cn> - 15.0.7-1.0.3
changelog:
  - Support LoongArch
  - Workaround: add buildrequires of clang on loongarch64 as
    the missing of gcc-toolset-12 currently


author: Nathaniel McCallum <npmccallum@redhat.com> - 6-1
changelog:
  - New upstream release
  - Specify unprivileged user/group during configuration
  - Move clevis user/group creation to base clevis package


author: Javier Martinez Canillas <javierm@redhat.com> - 11-2
changelog:
  - Delete remaining references to the removed http pin
  - Install cryptsetup and tpm2_pcrlist in the initramfs
  - Add device TCTI library to the initramfs
    Resolves: rhbz#1644876


author: Sergio Correia <scorreia@redhat.com> - 11-9
changelog:
  - Backport of upstream patches and the following fixes:
    - Rework the logic for reading the existing key
    - fix for different output from 'luksAddKey' command w/cryptsetup v2.0.2 (
    - pins/tang: check that key derivation key is available


author: Sergio Correia <scorreia@redhat.com> - 11-11
changelog:
  - Backport upstream PR#70 - Handle case where we try to use a partially
    used luksmeta slot
    Resolves: rhbz#1672371


author: Sergio Correia <scorreia@redhat.com> - 12-4
changelog:
  - cracklib-dicts should be also listed as a build dependency, since
    it's required for running some of the tests


author: Sergio Correia <scorreia@redhat.com> - 14-3
changelog:
  - If clevis-luks-askpass is enabled, it may be using a wrong target,
    since that changed in v14. Check and update it, if required.


author: Sergio Correia <scorreia@redhat.com> - 14-4
changelog:
  - Backport upstream PR#230 - clevis-luks-askpass now exits cleanly
    when receives a SIGTERM
    Resolves: rhbz#1876001


author: Deji Akingunola <dakingun@gmail.com> - 0.9.15-3
changelog:
  - Don't package APACHE.license since we've LGPL instead 
  - Package documentation in devel subpackage


author: Rex Dieter <rdieter@fedoraproject.org> 2.3.3.4-6
changelog:
  - contribs-lib is not built and installed even with config (#794795, upstream ID: 3392466)
  - pkgconfig file is missing clucene-shared (upstream ID: 3461512)
  - non-descriptive descripton (#757319)


author: Bastien Nocera <bnocera@redhat.com> - 3.0.4-2
changelog:
  - Remove the GStreamer plugin, as it can cause the one in the
    clutter-gst2 package to become unavailable, breaking Cheese
    https://bugzilla.gnome.org/show_bug.cgi?id=746883


author: Allisson Azevedo <allisson@gmail.com> 0.1.0-2
changelog:
  - INSTALL removed from docs
  - fix make install for keeping timestamps
  - fix devel files section
  - changed license for LGPL


author: Colin Walters <walters@redhat.com> 0.6.1-1
changelog:
  - Update to 0.6.1 so we can make tweet go
  - Loosen files globs so we don't have to touch them every version


author: Kalev Lember <kalevlember@gmail.com> - 1.5.4-1
changelog:
  - Update to 1.5.4
  - Drop duplicate deps that rpmbuild autogenerates
  - Drop an obsolete unused patch
  - Tighten deps with %{?_isa}


author: Orion Poplawski <orion@cora.nwra.com> - 2.4.3-2
changelog:
  - vim 7.0 now ships cmake files, so don't ship ours (bug #201018)
  - Add patch to Linux.cmake for Fortran soname support for plplot


author: Orion Poplawski <orion@cora.nwra.com> - 2.4.6-4
changelog:
  - Update macros.cmake to add CMAKE_INSTALL_LIBDIR, INCLUDE_INSTALL_DIR,
    LIB_INSTALL_DIR, SYSCONF_INSTALL_DIR, and SHARE_INSTALL_PREFIX


author: Rex Dieter <rdieter@fedoraproject.org> - 2.6.2-3
changelog:
  - Add -DCMAKE_VERBOSE_MAKEFILE=ON to %cmake (#474053)
  - preserve timestamp of macros.cmake
  - cosmetics


author: Orion Poplawski <orion@cora.nwra.com> - 2.8.0-0.5.rc4
changelog:
  - Update to 2.8.0 RC 4
  - Add FindJNI patch
  - Add test patch from cvs to fix Fedora build test build error


author: Orion Poplawski <orion@cora.nwra.com> - 2.8.3-0.3.rc4
changelog:
  - Update to 2.8.3 RC 4
  - Drop python 2.7 patch fixed upstream
  - No need to fixup source file permissions anymore


author: Orion Poplawski <orion@cora.nwra.com> - 2.8.5-0.3.rc3
changelog:
  - Update to 2.8.5 RC 3
  - Drop upstreamed swig patch
  - Apply upstream fix for issue 12307 (bug #723652)


author: Orion Poplawski <orion@cora.nwra.com> - 2.8.10.2-5
changelog:
  - Add patch from upstream to fix UsrMove handling (bug #917407)
  - Drop %config from rpm macros
  - Define FCFLAGS in cmake macro


author: Orion Poplawski <orion@cora.nwra.com> - 3.0.0-0.5.rc3
changelog:
  - Update to 3.0.0-rc3
  - Add patch to fix FindwxWidgets when cross-compiling for Windows (bug #1081207)


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.0-0.1.rc1
changelog:
  - Update to 3.2.0-rc1
  - Drop ninja patch fixed upstream
  - Upstream now ships icons, add icon-cache scriptlets


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.0-0.2.rc2
changelog:
  - Update to 3.2.0-rc2
  - Drop C++11 ABI workaround, fixed in gcc
  - Drop strict_aliasing patch fixed upstream long ago
  - Drop FindLua52, FindLua should work now for 5.1-5.3


author: Björn Esser <fedora@besser82.io> - 3.5.0-0.3.rc3
changelog:
  - cleanup trailing whitespaces
  - remove el5 stuff
  - doc-subpkg should be noarch'ed
  - doc-subpkg should not require main-pkg
  - add %{?_isa} to the applicable Requires
  - replaced %define with %global
  - handle macrosdir for rpm-macros properly
  - fix ownership of directories, add needed Requires
  - conditionalize appdata
  - handle docdir properly
  - generalize glob for man-pages independent of used compression
  - generalize for use as EPEL-package, too
  - use %license instead of %doc for license-files
  - split the common data-files into a noarch'ed subpackage
  - build html-docs and put them into the doc-subpkg


author: Orion Poplawski <orion@cora.nwra.com> - 3.6.1-2
changelog:
  - Ship symlinks to binaries with major version in name
  - Provide %cmakeX macro, where X is cmake major version


author: Björn Esser <fedora@besser82.io> - 3.6.2-5
changelog:
  - Rebuilt for libjsoncpp.so.11
  - Bootstrap without gui, due inter-circular dependency in qt5-rpm-macros


author: Björn Esser <besser82@fedoraproject.org> - 3.9.0-4
changelog:
  - Temporarily disable RunCMake.CPack_RPM, because it fails for the new
    way RPM handles debug-stuff


author: Björn Esser <besser82@fedoraproject.org> - 3.16.2-1
changelog:
  - Update to 3.16.2
  - Use %_vpath_builddir for out-of-tree build
  - Use %set_build_flags to export build flags if available
  - Use %set_build_flags inside macros.cmake if available


author: Orion Poplawski <orion@nwra.com> - 3.17.0-0.2.rc1
changelog:
  - Use python3 for rpm generators
  - Use lowercase names for cmake provides in generator (in addition to old names)


author: Patrick Uiterwijk (LOCAL) <puiterwijk@redhat.com> - 0.2-0.3.5e1faadgit
changelog:
  - Fixed license tag
  - Updated to new FSF address upstream
  - Removing libgsystem before build
  - Now claiming specific manpages
  - Made the config files noreplace
  - Removed the test assets
  - Put the web assets in a subpackage


author: Stef Walter <stefw@redhat.com> 0.18-1
changelog:
  - Update to 0.18 release
  - Add glib-networking build requirement
  - Let selinux-policy-targetted distribute selinux policy


author: Stef Walter <stefw@redhat.com> - 0.26-1
changelog:
  - Update to 0.26 release
  - Can see disk usage on storage page rhbz#1142459
  - Better order for lists of block devices rhbz#1142443
  - Setting container memory limit fixed rhbz#1142362
  - Can create storage volume of maximum capacity rhbz#1142259
  - Fix RAID device Bitmap enable/disable error rhbz#1142248
  - Docker page connects to right machine rhbz#1142229
  - Clear the format dialog label correctly rhbz#1142228
  - No 'Drop Privileges' item in menu for root rhbz#1142197
  - Don't flash 'Server has closed Connection on logout rhbz#1142175
  - Non-root users can manipulate user accounts rhbz#1142154
  - Fix strange error message when editing user accounts rhbz#1142154


author: Stef Walter <stefw@redhat.com> - 0.27-1
changelog:
  - Update to 0.27 release
  - Don't create cockpit-*-admin groups rhbz#1145135
  - Fix user management for non-root users rhbz#1140562
  - Fix 'out of memory' error during ssh auth rhbz#1142282


author: Peter <petervo@redhat.com> - 0.49-1
changelog:
  - Update to 0.49 release.
  - cockpitd was renamed to cockpit-wrapper the cockpit-daemon
    package was removed and is now installed with the
    cockpit-bridge package.


author: Peter <petervo@redhat.com> - 0.63-1
changelog:
  - Update to 0.63 release
  - Remove cockpit-docker for armv7hl while docker
    packages are being fixed


author: Stef Walter <stefw@redhat.com> - 0.73-1
changelog:
  - * Kubernetes UI can connect to non-local API server
  - * Automate Web Service container build on Docker Hub
  - * Add validation options to TLS client connections
  - * PAM pam_ssh_add.so module for loading SSH keys based on login password
  - * Build, testing and other fixes


author: Stef Walter <stefw@redhat.com> - 0.74-1
changelog:
  - * Display an intelligent message when password auth is not possible
  - * Correctly start terminal in home directory
  - * NetworkManager code is in a separate package
  - * PCP is an optional build dependency
  - * Lots of bugs, build and testing fixes


author: petervo <petervo@redhat.com> - 0.75-1
changelog:
  - New design for kubernetes listing pages
  - Namespace filter for kubernetes
  - Pretty http error pages
  - Lots of bugs, build and testing fixes


author: Stef Walter <stefw@redhat.com> - 0.76-1
changelog:
  - * Fix displaying of network bonds
  - * Better Kubernetes filter bar, shell access
  - * Show some Openshift related objects
  - * Use patternfly v2.2


author: Stef Walter <stefw@redhat.com> - 0.77-1
changelog:
  - * Work better with multipath storage
  - * Deletion of kubernetes objects
  - * Cleaner URLs in the bookmark bar
  - * Show a warning when adding too many machines
  - * Make authentication work when embedding Cockpit
  - * Complete componentizing Cockpit


author: Marcin Juszkiewicz <mjuszkiewicz@redhat.com> - 0.77-1.1
changelog:
  - disable FMA support to get it pass all tests on secondary architectures
  - removed duplicated "global rel 1"


author: Stef Walter <stefw@redhat.com> - 0.78-1
changelog:
  - * Fix extreme CPU usage issue in 0.77 release
  - * Fix compatibility with older releases
  - * Offer to activate multipathd for multipath disks
  - * Guide now contains insight into feature internals
  - * Lots of other minor bug fixes


author: Stef Walter <stefw@redhat.com> - 0.79-1
changelog:
  - * Vagrant file for Cockpit development
  - * Use libvirt for testing
  - * Display only last lines of Kubernetes container logs


author: Stef Walter <stefw@redhat.com> - 0.80-1
changelog:
  - * UI for loading, viewing, changing Private SSH Keys
  - * Always start an ssh-agent in the cockpit login session
  - * New listing panel designs
  - * Lots of testing and bug fixes


author: Stef Walter <stefw@redhat.com> - 0.81-1
changelog:
  - * Allow configuring NTP servers when used with timesyncd
  - * Fix regression in network configuration switches
  - * Make the various graphs look better
  - * Openshift Routes and Deployment Configs can be removed
  - * Run integration tests using TAP "test anything protocol"
  - * Lots of other bug fixes and cleanup


author: Stef Walter <stefw@redhat.com> - 0.82-1
changelog:
  - * Support certificate chains properly in cockpit-ws
  - * Rename the default self-signed certificate
  - * Implement distributed integration testing


author: Stef Walter <stefw@redhat.com> - 0.83-1
changelog:
  - * Fix NTP server configuration bugs
  - * Kubernetes dashboard topology icons don't leave the view
  - * Kubernetes dashboard uses shared container-terminal component
  - * Fix race when adding machine to Cockpit dashboard
  - * Updated documentation for running new distributed tests
  - * Lots of other bug and testing fixes


author: Stef Walter <stefw@redhat.com> - 0.84-1
changelog:
  - * Add a cockpit manual page
  - * Set correct SELinux context for certificates
  - * Remove custom SELinux policy
  - * Testing and bug fixes


author: Stef Walter <stefw@redhat.com> - 0.86-1
changelog:
  - * SOS report UI page
  - * Simpler way for contributors to build cockpit RPMs
  - * Infrastructure for implementing downloads


author: Stef Walter <stefw@redhat.com> - 0.87-1
changelog:
  - * Fix login on Windows, don't prompt for additional auth
  - * Use the machine host name in the default self-signed certificate
  - * Cockpit release tarballs are now distributed in tar-ustar format
  - * Allow overriding package manifests
  - * Testing and build fixes


author: Stef Walter <stefw@redhat.com> - 0.88-1
changelog:
  - * User interface for OSTree upgrades and rollbacks
  - * General reusable purpose angular kubernetes client code
  - * Allow custom login scripts for handling authentication
  - * A specific dashboards can now be the default destination after login
  - * Kill ssh-agent correctly when launched by cockpit-bridge
  - * Add a new cockpit-stub bridge for non-local access


author: Stef Walter <stefw@redhat.com> - 0.89-1
changelog:
  - * Start routine testing of Cockpit on Debian Unstable
  - * Make the config file case insensitive
  - * Reorder graphs on server summary page
  - * Don't suggest syncing users when adding a machine to dashboard
  - * Enable weak dependencies for F24+
  - * Show correct data in per interface network graphs
  - * Fix the Vagrantfile to pull in latest Cockpit
  - * Add Content-Security-Policy header support


author: Stef Walter <stefw@redhat.com> - 0.90-1
changelog:
  - * Fix Content-Security-Policy which broke loading in certain situations
  - * Deal correctly with failures trying to join unsupported domains
  - * Add documentation about Cockpit startup
  - * Better data in storage usage graphs
  - * Start creating debian source packages


author: Stef Walter <stefw@redhat.com> - 0.91-1
changelog:
  - * Fix computing of graph samples on 32-bit OS
  - * Distribute licenses of included components
  - * Distribute development dependencies
  - * Support 'make clean' properly in the tarball


author: Stef Walter <stefw@redhat.com> - 0.92-1
changelog:
  - * OAuth login support
  - * Update Patternfly
  - * Log to stderr when no journal
  - * Make sosreport work on RHEL and Atomic


author: Stef Walter <stefw@redhat.com> - 0.93-1
changelog:
  - * Set system performance profile via tuned
  - * Support for WebSocket client in cockpit-bridge
  - * Support using Nulecule with Openshift
  - * Actually exit cockpit-ws when it's idle


author: Stef Walter <stefw@redhat.com> - 0.94-1
changelog:
  - * Handle interruptions during cockpit-ws start while reading from /dev/urandom
  - * Remove BIOS display from Server Summary page
  - * Support tuned descriptions
  - * Fix Content-Security-Policy in example manifest.json files


author: Stef Walter <stefw@redhat.com> - 0.95-1
changelog:
  - * iSCSI initiator support on the storage page
  - * Page browser title now uses on operating system name
  - * Better look when Cockpit disconnects from the server
  - * Avoid use of NFS in the Vagrantfile
  - * Expand 'Tools' menu when navigating to one of its items
  - * Set a default $PATH in cockpit-bridge


author: Stef Walter <stefw@redhat.com> - 0.102-1
changelog:
  - * Can configure Docker restart policy for new containers
  - * Use a single dialog for creating logical volumes
  - * Package and test the storage UI on Debian
  - * Don't offer 'Computer OU' when joining IPA domains
  - * Don't distribute jshint build dependency due to its non-free license


author: Stef Walter <stefw@redhat.com> - 0.103-1
changelog:
  - * Strict Content-Security-Policy for subscriptions component
  - * New dialog for Kubernetes connection configuration
  - * Release to a cockpit-project Ubuntu PPA
  - * Remove jQuery usage from cockpit.js
  - * New styling for cluster dashboard
  - * Fix build issue on MIPS


author: Stef Walter <stefw@redhat.com> - 0.104-1
changelog:
  - * Show errors correctly when deleting or modifying user accounts
  - * Add support for iSCSI cluster volumes
  - * Strict Content-Security-Policy in the dashboard, sosreport and realmd code
  - * Better list expansion and navigation behavior across Cockpit
  - * Don't show 'Computer OU' field when leaving a domain
  - * Remove usage of bootstrap-select
  - * Show errors properly in performance profile dialog
  - * Fix Cluster sidebar to react to window size
  - * Allow specifying specific tags in registry image streams
  - * Make registry project access policy more visible


author: Stef Walter <stefw@redhat.com> - 0.105-1
changelog:
  - * Strict Content-Security-Policy in all shipped components of Cockpit
  - * Can now add and remove Openshift users to and from groups
  - * Add timeout setting for Cockpit authentication
  - * Registry interface now has checkbox for mirroring from insecure registries
  - * Kubernetes dashboard now allows deletion of Nodes


author: Stef Walter <stefw@redhat.com> - 0.106-1
changelog:
  - * Add namespaces to cockpit CSS classes
  - * Display container image layers in a simpler graph
  - * Hide actions in Cluster projects listing that are not accessible


author: Stef Walter <stefw@redhat.com> - 0.107-1
changelog:
  - * Display image stream import errors
  - * Add GlusterFS persistent volumes in Cluster dashboard
  - * Show a list of pending persistent volume claims
  - * jQuery Flot library is no longer part of the base1 package
  - * Fix Content-Security-Policy issues with jQuery Flot


author: Stef Walter <stefw@redhat.com> - 0.108-1
changelog:
  - * SELinux troubleshooting alerts can now be dismissed
  - * Show SELinux icon for critical alerts
  - * SELinux enforcing mode can be turned off and on with a switch
  - * Kubernetes Nodes are now include charts about usage data
  - * Fix Debian dependency on Docker
  - * Update the look and feel of the toggle switch
  - * Update ListenStream documentation to include address info


author: Dominik Perpeet <dperpeet@redhat.com> - 0.109-1
changelog:
  - * API stabilization, structural cleanup
  - * SELinux Troubleshooting: documentation, support latest API
  - * Update Patternfly
  - * Use CockpitLang cookie and Accept-Language for localization
  - * Can now click through to perform administration tasks on Nodes on the Cluster dashboard
  - * Cockpit terminal now supports shells like fish


author: Stef Walter <stefw@redhat.com> - 0.111-1
changelog:
  - * Tarball build issue in 0.110 is now fixed
  - * The Containers page layouts have been tweaked
  - * Make the Containers resource limits work again
  - * Registry image now have layers displayed correctly


author: Stef Walter <stefw@redhat.com> - 0.112-1
changelog:
  - * Don't show network interfaces where NM_CONTROLLED=no is set
  - * Add textual fields to container memory and CPU sliders
  - * Display contianer memory and CPU resources on Debian
  - * Disable tuned correctly when clearing a performance profile
  - * Fix SELinux enforcing toggle switch and status


author: Stef Walter <stefw@redhat.com> - 0.113-1
changelog:
  - * Show timer information for systemd timer jobs
  - * Use 'active-backup' as the default for new network bonds
  - * When changing system time check formats properly
  - * Hide the machine asset tag when no asset exists
  - * Disable the network on/off switch for unknown or unmanaged interfaces
  - * Show full string for system hardware info and operating system name


author: Stef Walter <stefw@redhat.com> - 0.114-1
changelog:
  - .104
  - * Network configuration of the Ethernet MTU
  - * Red Hat Subscriptions can now specify activation keys and orgs
  - * Start integration testing on CentOS
  - * SSH Host keys are show on system page
  - * Machine ID is shown on system page
  - * Show intelligent password score error messages


author: Stef Walter <stefw@redhat.com> - 0.115-1
changelog:
  - * Setup Docker container and image storage through the UI
  - * Use Webpack to build Cockpit UI packages
  - * Update the Cockpit Vagrant development box to use Fedora 24


author: Stef Walter <stefw@redhat.com> - 0.116-1
changelog:
  - * Support for volumes when starting a docker container
  - * Support for setting environment variables in a docker container
  - * Fix regressions that broke display of localized text


author: Stef Walter <stefw@redhat.com> - 0.117-1
changelog:
  - * Add support for network teams
  - * Select translations for complex language names
  - * Don't allow formating extended partitions
  - * Can configure Openshift Registry so anonymous users can pull images


author: Stef Walter <stefw@redhat.com> - 118-1
changelog:
  - Support PAM conversations on the Login screen
  - Users can create systemd timer jobs
  - Provide default names for volume groups and logical volumes
  - Make Docker graphs work on Debian
  - Only offer to format disks with supported file systems
  - Show all managed NetworkManager devices
  - Use webpack for building Cockpit javascript
  - Cockpit URLs can be proxied with a configured HTTP path prefix
  - Allow Cockpit packages to require a minimum version of Cockpit
  - Translations fixes


author: petervo <petervo@redhat.com> - 119-1
changelog:
  - Adds basic VM Management and Monitoring
  - MDRaid job improvements
  - Show unmanaged network devices
  - Better errors when formating storage devices
  - Updated VNC example
  - Port subscriptions package to react
  - Allow branding.css to overide shell css


author: Stef Walter <stefw@redhat.com> - 120-1
changelog:
  - New containers page layout
  - Quick filtering of containers and images on the container page
  - Added sidebar for phisical volumes in a volume group
  - Run a separate cockpit-ssh process when making SSH connections
  - Allow connecting to remote machines from the login page
  - Only connect to remote machines already known to Cockpit
  - Fix bugs preventing journal page from working on Firefox 49
  - Add tooltip describing group name in Roles list


author: Stef Walter <stefw@redhat.com> - 121-1
changelog:
  - Network Manager Checkpoints
  - Add Debian Branding
  - Fix GSSAPI login on Debian and Ubuntu
  - Generate map files for debugging Javascript and CSS


author: Stef Walter <stefw@redhat.com> - 122-1
changelog:
  - Works with UDisks in addition to storaged
  - Allow logging into other systems from login page
  - Explicitly specify javascript dependency versions


author: Stef Walter <<stefw@redhat.com>> - 123-1
changelog:
  - Release a second tarball with cached javascript dependencies
  - Start verifying that Cockpit works on Ubuntu 16.04
  - Enable and verify the network functionality on Debian
  - Integration tests now log core dumps for diagnosis


author: Stef Walter <<stefw@redhat.com>> - 124-1
changelog:
  - Build and test on Debian Jessie
  - Deprecate older javascript files
  - Properly terminate user sessions on the Accounts page
  - Fix regression on login screen in older Internet Explorer browsers
  - Fix regression where Date Picker was not shown in System Time dialog


author: Stef Walter <<stefw@redhat.com>> - 125-1
changelog:
  - Cockpit is now properly translatable
  - Display OSTree signatures
  - New expandable views for storage devices
  - No longer offer to format read-only block devices
  - Use stored passphrases for LUKS devices properly
  - Start testing on RHEL 7.3
  - More strict about transport channels a bridge accepts
  - System shutdown can be scheduled by date


author: Stef Walter <<stefw@redhat.com>> - 126-1
changelog:
  - Show security scan information about containers
  - Choose whether password is cached and reused on login screen
  - Allow renaming of active devices in networking interface
  - More clearly indicate when checking network connectivity
  - The remotectl command can now combine certificate and key files
  - Support Openshift's certificate autogeneration when used as a pod
  - The remotectl tool now checks for keys in certificate files
  - Domain join operations can now be properly cancelled
  - Make Kerberos authentication work even if gss-proxy is in use
  - Javascript code can now export DBus interfaces
  - When proxied, support X-Forwarded-Proto
  - Ignore block devices with a zero size in the storage interface


author: Stef Walter <<stefw@redhat.com>> - 129-1
changelog:
  - Diagnostic sosreport feature now works on RHEL Atomic again
  - The configure script has a --disable-ssh option to toggle libssh dep
  - The configure --disable-ws option has been replaced with above.
  - Unit tests have been fixed on recent GLib versions
  - Several Fedora and Debian packaging fixes


author: Stef Walter <<stefw@redhat.com>> - 130-1
changelog:
  - cockpit.file() can read non-memory-mappable file
  - Add kdump configuration user interface
  - Allow container Registry Console user names with '@' sign


author: Stef Walter <<stefw@redhat.com>> - 131-1
changelog:
  - Show session virtual machines on Machines page
  - Fix use of the TAB key on login page
  - Robust naming and detection of network bond master
  - Debian packaging fixes


author: Martin Pitt <<mpitt@redhat.com>> - 132-1
changelog:
  - Make basic SELinux functionality available without setroubleshootd
  - Allow changing the MAC address for ethernet adapters and see them for bonds
  - Hide "autoconnect" checkbox for network devices without settings
  - Support for external providers other than libvirt on Machines page
  - Some tooltip fixes
  - Add option to restrict max read size to the Cockpit file API
  - Relax dependencies on cockpit-bridge package on Debian/Ubuntu
  - Rename cockpit-test-assets package to cockpit-tests
  - When touching patched files handle case of only one file
  - Always build the cockpit-tests subpackage


author: Martin Pitt <<mpitt@redhat.com>> - 133-1
changelog:
  - Remotely managed machines are now configured in /etc/cockpit/machines.d/*.json
  - Fix NetworkManager's "MTU" dialog layout
  - Build the cockpit-tests package for releases too
  - Split translations into individual packages
  - Packages now configure alternate cockpit-bridge's to interact with the system


author: Martin Pitt <<mpitt@redhat.com>> - 134-1
changelog:
  - Show /etc/motd in the "System" task page
  - Drop "System" service actions which are intended for scripts
  - Make login page translatable
  - NetworkManager now activates slave interfaces by itself
  - Add call timeout option to the cockpit.dbus() API
  - The Debian packaging is now able to apply binary patches


author: Martin Pitt <<mpitt@redhat.com>> - 137-1
changelog:
  - Read ~/.ssh/known_hosts for connecting to remote machines with ssh
  - The Storage LVM setup can add unpartitioned free space as a physical volume
  - NetworkManager's Team plugin can be used on architectures other than x86_64
  - Cockpit's web server understands and properly responds to HTTP HEAD requests
  - Allow parameter substitution in manifest when spawning peer bridges


author: Stef Walter <<stefw@redhat.com>> - 138-1
changelog:
  - Only allow mdraid disk removal when it won't destroy data
  - Allow DN style usernames in the Kubernetes dashboard
  - Simplify protocol that cockpit talks to session authentication processes


author: Martin Pitt <<mpitt@redhat.com>> - 139-1
changelog:
  - Show more information about virtual machines, such as boot order
  - Fix enablement of timer systemd units created on Services page
  - Fix Storage crash on multiple iSCSI sessions
  - cockpit-docker is now installable with docker-ce or other alternatives
  - Hide docker push commands on Registry image pages for  "pull" roles


author: Martin Pitt <<martin@piware.de>> - 142-1
changelog:
  - Virtual machines display an interactive console, either in browser, or a popup viewer
  - Fix Virtual Machines operations on non-English locales
  - Add documentation explaining how to grant/restrict access via polkit rules


author: Martin Pitt <<martin@piware.de>> - 143-1
changelog:
  - Add "Software Updates" page for package (rpm/deb) based operating systems
  - Fix cockpit-machines package to make inline VNC console actually work
  - Fix Kubernetes authentication when Kubernetes configured for RBAC
  - Build Docker page for s390x architecture


author: Martin Pitt <martin@piware.de> - 145-1
changelog:
  - Resize the terminal dynamically to use all available space
  - Let the Machines page update immediately after changes
  - Add delete VM functionality to the Machines page
  - Retire support for external Machines provider API
  - Always recommend rebooting after applying Software Updates
  - Group D-Bus channels to avoid hitting connection limits
  - Fix building on Fedora Rawhide/glibc 2.25.90


author: Martin Pitt <martin@piware.de> - 146-1
changelog:
  - Show recent updates and live update log on Software Updates page
  - Improve available Software Updates table layout for small/mobile screens
  - Support OAuth Kubernetes logins to work with Google Compute Engine
  - Fix reporting ABRT crashes that are already known to the server
  - Scroll the virtual machine VNC console into view automatically


author: petervo <petervo@redhat.com> - 149-1
changelog:
  - Support sending non-maskable interrupt to VMs
  - Fix building on fedora 27
  - Add information about non-met conditions for systemd services
  - Clear cockpit cookie on logout


author: Martin Pitt <martin@piware.de> - 150-1
changelog:
  - Automatically enable and start newly created timers on the Services page
  - Support cockpit-dashboard installation into OSTree overlay on Atomic
  - Support Kubernetes basic auth with Google Compute Engine 1.7.x


author: Martin Pitt <martin@piware.de> - 151-1
changelog:
  - Support loading SSH keys from arbitrary paths
  - Support X-Forwarded-Proto HTTP header for Kubernetes
  - Fix Kubernetes connection hangs (regression in version 150)


author: Martin Pitt <martin@piware.de> - 152-1
changelog:
  - Add Applications page
  - Add automatic update configuration for dnf to Software Updates
  - Fix cockpit-bridge crash if /etc/os-release does not exist


author: Martin Pitt <martin@piware.de> - 153-1
changelog:
  - Add cockpit-ovirt package to control oVirt virtual machine clusters
  - Clean up rpmlint/lintian errors in the packages


author: Martin Pitt <martin@piware.de> - 154-1
changelog:
  - Center the "Disconnected" message in the content area
  - Fix two layout regressions on the Cluster page
  - Remove long-obsolete "./configure --branding" option


author: Martin Pitt <martin@piware.de> - 155-1
changelog:
  - Add NFS client support to the Storage page
  - Add "Maintenance" switch for oVirt hosts
  - Fix Terminal rendering issues in Chrome
  - Prevent closing Terminal with Ctrl+W when focused
  - Support the upcoming OpenShift 3.7 release


author: Martin Pitt <martin@piware.de> - 156-1
changelog:
  - Redesign navigation and support mobile browsing
  - Use /etc/cockpit/krb5.keytab if present to support alternate keytabs
  - Add project homepage link to Apps page
  - Maintain issue(5) file with current Cockpit status
  - Use event-driven refresh of oVirt data instead of polling


author: Martin Pitt <martin@piware.de> - 158-1
changelog:
  - Add check boxes for common NFS mount options
  - Clarify Software Update status if only security updates are available
  - Create self-signed certificates with SubjectAltName


author: Martin Pitt <martin@piware.de> - 159-1
changelog:
  - Configure data deduplication with VDO devices on Storage page
  - Add serial console to virtual Machines page and redesign the Consoles tab
  - Show more error message details for failures on virtual Machines page


author: Martin Pitt <martin@piware.de> - 160-1
changelog:
  - Add kubevirt Virtual Machines overview
  - Redesign package list on Software Updates page and show RHEL Errata
  - Install AppStream collection metadata packages on demand on Apps page
  - Add AppStream metadata to cockpit-sosreport for showing up on Apps page
  - Change CPU graphs to use "100%" for a fully loaded multi-processor system
  - Show storage, network, and other numbers with 3 digits of precision
  - Add an example bastion container


author: Martin Pitt <martin@piware.de> - 161-1
changelog:
  - New VMs can be created on Machines page
  - VMs running in Kubernetes can now be deleted
  - Improve LVM volume resizing
  - Add new Hardware Information page
  - Load Application metadata (Appstream) packages on demand on Debian/Ubuntu
  - Rename cockpit-ovirt package to cockpit-machines-ovirt
  - Stop advertising and supporting cockpit-bundled jQuery library


author: Martin Pitt <martin@piware.de> - 163-1
changelog:
  - Drop "Transfer data asynchronously" VDO option on Storage page
  - Hide Docker storage pool reset button when it cannot work properly
  - Update jQuery to version 3.3.1 (deprecated cockpit API!)


author: Martin Pitt <martin@piware.de> - 164-1
changelog:
  - Storage: Move NFS management into new details page
  - System: Show available package updates and missing registration
  - System: Fix inconsistent tooltips
  - Logs: Change severities to officially defined syslog levels
  - Machines: Add error notifications
  - Accessibility improvements
  - Reloading the page in the browser now reloads Cockpit package manifests


author: Martin Pitt <martin@piware.de> - 165-1
changelog:
  - Storage: Show more details of sessions and services that keep NFS busy
  - Machines: Detect if libvirtd is not running
  - Machines: Show virtual machines that are being created


author: Martin Pitt <martin@piware.de> - 166-1
changelog:
  - Kubernetes: Add creation of Virtual Machines
  - Realms: Automatically set up Kerberos keytab for Cockpit web server
  - Numbers now get formatted correctly for the selected language


author: Martin Pitt <martin@piware.de> - 169-1
changelog:
  - Storage: Offer installation of NFS client support
  - System: Request FreeIPA SSL certificate for Cockpit's web server
  - Services: Show unit relationships
  - Provide motd help about how to access cockpit


author: Martin Pitt <martin@piware.de> - 170-1
changelog:
  - Software Updates: Layout rework
  - oVirt: Use authenticated libvirt connection by default
  - Split out optional packages into new cockpit-appstream dist-git, see
    discussion in RHELPLAN-3661; append "+as" version suffix to avoid collisions
    with cockpit revisions.
  - Temporarily disable cockpit-kubernetes rhbz#1584155


author: Martin Pitt <martin@piware.de> - 171-1
changelog:
  - Machines: Add virtual CPU configuration
  - Kubernetes: Add KubeVirt pod metrics
  - Docker: Show container volumes
  - Fix broken actions for non-administrators
  - Networking: Handle non-running NetworkManager
  - Accounts: User role improvements
  - Localize times


author: Martin Pitt <martin@piware.de> - 172-1
changelog:
  - System: Offer installation of PCP
  - Software Updates: Improve layout in mobile mode
  - Remove ability to drop privileges from navigation bar
  - API: Introduce flow control for all channels
  - Python 3 support


author: Martin Pitt <mpitt@redhat.com> - 173-1
changelog:
  - Storage: Offer installation of VDO
  - Machines: Add disks to a virtual machine
  - Disable cockpit-docker rhbz#1602951


author: marius Vollmer <mvollmer@redhat.com> - 174-1
changelog:
  - Kubernetes: VM detail page
  - Realmd: Install on demand
  - firewalld service is now being dropped by upstream
  - iscsi works fully now


author: Martin Pitt <mpitt@redhat.com> - 179-1
changelog:
  - Fix building with platform-python rhbz#1631174
  - Machines: Fix system VMs with non-root users rhbz#1632772
  - Machines: Offer cockpit-machines as Application


author: Martin Pitt <mpitt@redhat.com> - 181-1
changelog:
  - Fix key typing in file auto complete widget rhbz#1637866
  - Use libvirt-dbus by default rhbz#1637803


author: Martin Pitt <mpitt@redhat.com> - 183-1
changelog:
  - Machines: Manage storage pools
  - Machines: libvirt connection choice during VM creation
  - PackageKit page: Display registration status clearly
  - Drop .map files from -tests, should be only in debuginfo package rhbz#1648953


author: Martin Pitt <mpitt@redhat.com> - 184-1
changelog:
  - Machines: Fix Dialog and tab layouts rhbz#1658490, rhbz#1657119
  - Machines: Fix information popup in vCPU dialog rhbz#1657133
  - Machines: Enforce https:// URLs for remote VM image locations rhbz#1644267
  - Storage: Filesystem labels are validated upfront rhbz#1655580
  - Storage: Some mount options are prefilled when needed
  - Storage: Fix empty tooltips rhbz#1655922


author: Martin Pitt <mpitt@redhat.com> - 189-1
changelog:
  - Machines: Remove useless notifications from disk tab rhbz#1632800
  - Machines: Add deletion and deactivation of storage pools/volumes
    rhbz#1658847, rhbz#1668882, rhbz#1668877
  - Machines: Fix preparation of disk data for disks of type volume rhbz#1661897
  - Machines: Add disk format field when creating new disk xml rhbz#1662213
  - Machines: Fix storage pool state after destroy/undefine rhbz#1663793
  - Machines: Add import of existing images rhbz#1666825
  - Machines: Enable/disable VM autostart rhbz#1670491


author: Martin Pitt <mpitt@redhat.com> - 191-1
changelog:
  - Storage: Fix pre-filling of vdo fstab options rhbz#1672935
  - Machines: Add PXE boot rhbz#1680973
  - Machines: Add pause/resume rhbz#1680401
  - Machines: Configure boot device order rhbz#1672760
  - Machines: Import existing qcow2 image rhbz#1666825
  - Machines: Edit virtual memory rhbz#1676557
  - Machines: Deletion of storage volumes rhbz#1668882


author: Martin Pitt <mpitt@redhat.com> - 193-1
changelog:
  - Machines: iSCSI direct storage pools
  - Machines: Auto-detect guest operating system rhbz#1652959
  - Machines: Support https://*.iso installation source rhbz#1684422
  - Machines: Fix crash on VM creation with Edge browser rhbz#1692707
  - Storage: The "Format" button is no longer hidden
  - Storage: Improve performance with many block devices


author: Martin Pitt <mpitt@redhat.com> - 196-1
changelog:
  - Machines: Support ISO source from http:// rhbz#1644267
  - Machines: Select destination storage pool on creation rhbz#1658852
  - Machines: Hide iscsi-direct type from create new pool dialog when not
    available rhbz#1709708
  - Machines: Fix handling of storage pools that failed to get active
    rhbz#1715388
  - Machines: Fix OS detection while changing installation source rhbz#1715409


author: Martin Pitt <mpitt@redhat.com> - 197-1
changelog:
  - Machines: Support all storage pool types for new disks
  - Machines: Show available space on host at VM creation
  - Machines: Fix regression on network tab rhbz#1720267


author: Martin Pitt <mpitt@redhat.com> - 197.1-1
changelog:
  - Machines: Fix crash on deleting VM in the middle of the installation (rhbz#1715399)
  - Machines: Properly refresh storage pools (rhbz#1680293)
  - Machines: Fix pool types which don't support volume creation (rhbz#1731849)
  - Machines: Disable PXE booting on session connection (rhbz#1731803)


author: Martin Pitt <mpitt@redhat.com> - 197.2-1
changelog:
  - Machines: Stop bringing libvirt package as a dependency (rhbz#1728219)
  - Machines: Implement VM installation for additional disk types
  - Machines: Fix setting of volume format when adding new disks to VMs (rhbz#1732303)
  - Machines: Disallow pool deletion if pool/volumes are used by any VM (rhbz#1731865)
  - Check for subscription only if enabled in package manager (rhbz#1701067)


author: Matej Marusak <mmarusak@redhat.com> - 206-1
changelog:
  - Machines: Network interface deletion
  - Machines: Refactor Create VM dialog and introduce a download option
  - Software Updates: Use notifications for available updates info
  - Machines: Configure read-only and shareable disks (rhbz#1684304)
  - machines: Implement adding virtual network interfaces (rhbz#1672753)
  - Machines: Creation of Storage Volumes (rhbz#1676506)
  - Machines: VM creation and import dialog changes
  - Machines: Enable interface type "direct" in NIC configuration
  - Machines: LVM storage pools (rhbz#1676600)
  - Machines: VM creation dialog now shows the recommended memory for the selected OS
  - Machines: Managing of Virtual Networks (rhbz#1672755)
  - Machines: Support more disk types


author: Matej Marusak <mmarusak@redhat.com> - 208-1
changelog:
  - Storage: Drop “default mount point” concept
  - Machines: Support transient virtual networks and storage pools
  - Machines: Sliders for disk size and memory in VM creation
  - Storage: List all software devices in a single panel
  - Redesigned notifications


author: Matej Marusak <mmarusak@redhat.com> - 209-1
changelog:
  - Machines: Don't disable detaching button when VM is running (rhbz#1777201)
  - Machines: Support transient virtual networks and storage pools (rhbz#1715429)
  - Machines: Fix Oops when creating a VM from ISO on system with no storage pools (rhbz#1778049)
  - Stop fetching variables from base1/patternfly.css because they can be outdated (rhbz#1777683)


author: Matej Marusak <mmarusak@redhat.com> - 210-1
changelog:
  - Dashboard: Support SSH identity unlocking when adding new machines
  - Machines: Support “bridge” type network interfaces
  - Machines: Support “bus” type disk configuration (rhbz#1671144)
  - Machines: Fix default storage pool search (rhbz#1778049)
  - Machines: Fix lost of configuration changes made before installation (rhbz#1780449)
  - Machines: Fix edit NIC dialog when the current network in XML was deleted (rhbz#1780452)
  - Machines: Fix default volume format detection in Disk Add dialog (rhbz#1784304)
  - Machines: Use all cells when getting Host Max Memory (rhbz#1780530)


author: Matej Marusak <mmarusak@redhat.com> - 211-1
changelog:
  - Machines: The VM is covered when another one has the same name (rhbz#1780451)
  - Machines: Decompress ipv6 addresses before validating them (rhbz#1784289)
  - Machines: Fix default bridge selection for `Bridge to LAN` NIC (rhbz#1791537, rhbz#1791543)


author: Martin Pitt <mpitt@redhat.com> - 211.2.1
changelog:
  - Machines: Fix stuck delete dialogs (rhbz#1791543, #1792379)
  - Machines: Fix CPU statistics (rhbz#1763641)
  - Machines: Fix incorrect format when adding existing disk to VM (rhbz#1792319)
  - Storage: Minor layout fixes
  - Translation updates


author: Matej Marusak <mmarusak@redhat.com> - 219-1
changelog:
  - New upstream release 219
  - Send key functionality for the virtual machines (rhbz#1693487)
  - Fix dnf-automatic timer parsing (rhbz#1829685)


author: Martin Pitt <mpitt@redhat.com> - 221-1
changelog:
  - machines: Remove --noreboot parameter to virt-install for VM installation
    (rhbz#1750637)
  - Translation updates


author: Martin Pitt <mpitt@redhat.com> - 224-1
changelog:
  - Translation updates
  - Machines: Remove creation of user account (rhbz#1853918)
  - Machines: Fix reboot after PXE installation (rhbz#1853408, rhbz#1859045)
  - Machines: Fix notification for transient VMs (rhbz#1853649)
  - Machines: Make Storage/Network lists consistent with VM list (rhbz#1854257)
  - Machines: Fix close button on NIC Edit modal dialog header (rhbz#1857044)


author: Matej Marusak <mmarusak@redhat.com> - 224.1-1
changelog:
  - machines: add padding to storage pools list cells (rhbz#1857500)
  - machines: Fix OS autodetection in create VM dialog (rhbz#1862333)
  - machines: Fix TypeError for OSRow in VM creation dialog (rhbz#1862106)


author: Matej Marusak <mmarusak@redhat.com> - 224.2-1
changelog:
  - lib: Include current directory in FileAutoComplete option listing (rhbz#1866995)
  - lib: Make sure that the expandable part of table rows has unique key (rhbz#1865821)


author: Katerina Koukiou <kkoukiou@redhat.com> - 233.1-1
changelog:
  - machines: Inline error messages (rhbz#1666829)
  - machines: Reimplement the design of the main VMs list (rhbz#1780537, rhbz#1847712, rhbz#1858716, rhbz#1862406, rhbz#1873931)
  - storage: List entries from /etc/crypttab that are still locked
  - machines: Add support for reverting and deleting VM snapshots
  - machines: Add support for VM snapshots (rhbz#1668870, rhbz#1673158)
  - machines: Virtual machine list filtering
  - storage: Better support for "noauto" LUKS devices
  - machines: Fix 'PXE' installed VMs having network first in the boot order even after the installation finishded (rhbz#1859008)
  - machines: Fix Desktop Viewer Console tab CSS issues (rhbz#1868584)
  - tools: Fix duplicated -debuginfo files (rhbz#1870521)
  - machines: Show cdrom details in bootorder dialog (rhbz#1880175)


author: Katerina Koukiou <kkoukiou@redhat.com> - 234-1
changelog:
  - machines: Allow editing VM's CPU mode and model (rhbz#1683301)
  - machines: Add support for cloning VMs (rhbz#1683391)
  - dashboard: Drop cockpit-dashboard package, replaced with shell host switcher


author: Matej Marusak <mmarusak@redhat.com> - 235-1
changelog:
  - machines: Fix check of cpu configuration between active/inactive XML (rhbz#1913205)
  - machines: Fix rounding of memory when switching from MB to GB (rhbz#1908683)


author: Martin Pitt <mpitt@redhat.com> - 236-1
changelog:
  - machines: Fix unstable VNC console (rhbz#1750642)
  - machines: Fix alert close property in the VM details (rhbz#1918147)
  - machines: Fix crash when volumes disappear before starting installation (rhbz#1918156)
  - machines: Fix crash when undefining created VM before starting installation (rhbz#1916597)
  - machines: Fix shutting down transient VM (rhbz#1916595)
  - machines: Fix VM detail page's "Install" button (rhbz#1916120)


author: Katerina Koukiou <kkoukiou@redhat.com> - 237-1
changelog:
  - machines: Fix virt-viewer file download on chromium based Edge (rhbz#1730666)
  - machines: Fix crash when a target is pasted in the VM creation dialog (rhbz#1872660)
  - machines: Fix alert about pending changes in NIC edit dialog (rhbz#1911657)
  - machines: Fix alert about pending changes in overview card related to boot order (rhbz#1915765)
  - machines: Fix file autocomplete select not closing on enter (rhbz#1874392)
  - machines: Fix white screen when deleting a VM in an environment without storage pools (rhbz#1912384)


author: Katerina Koukiou <kkoukiou@redhat.com> - 238-1
changelog:
  - machines: VM disk creation supports a custom path
  - Updates: List outdated software that needs a restart


author: Martin Pitt <mpitt@redhat.com> - 242-1
changelog:
  - Updates: Show subscription status on cloud images (rhbz#1931429)
  - Machines: Allow creation of non-root user for unattended installations (rhbz#1940287)


author: Martin Pitt <mpitt@redhat.com> - 246-1
changelog:
  - Polish of the Storage page
  - Storage: Show both SHA256 and SHA1 Tang fingerprints
  - Updated translations


author: Katerina Koukiou <kkoukiou@redhat.com> - 248-1
changelog:
  - Machines: Share host files with the guest using virtiofs
  - Machines: Show list of pass-through devices


author: Matej Marusak <mmarusak@redhat.com> - 249-1
changelog:
  - Machines: Fix input for "Target Path" when Creating storage pool (rhbz#1866225)
  - Machines: Don't round or floor memory and storage size unnecessarily (rhbz#1979152)
  - Machines: Use cockpit's proxy API for monitoring libvirt service changes (rhbz#1974223)
  - Machines: Fix ooops when press the down arrow several times when inputting custom path (rhbz#1977554)


author: Martin Pitt <mpitt@redhat.com> - 250-1
changelog:
  - Software Updates: Introduce basic kpatch support
  - Software Updates: Handle unregistered RHEL systems with non-CDN OS repository
    (rhbz#1970057)
  - Machines: Read qemu.conf to get spice/vnc address (rhbz#1963701)


author: Martin Pitt <mpitt@redhat.com> - 255-1
changelog:
  - Machines: Parse supported disk bus types from domcapabities (rhbz#1862779)
  - Machines: Stop exposing unattended installation option for ISO installation
    media (rhbz#1868594)


author: Katerina Koukiou <kkoukiou@redhat.com> - 257-1
changelog:
  - Machines: Now officially supported on Arch Linux (https://archlinux.org/)
  - Machines: Support selecting between consoles of the same type


author: Matej Marusak <mmarusak@redhat.com> - 261-1
changelog:
  - storage: Unmounting or deleting a busy filesystem is now supported
  - Tests improvements and stabilization
  - Machines: Delete disks only after VM is successfully undefined and destroyed (rhbz#2031678)
  - Machines: Do not change "startVm" value when selecting Unattended installation (rhbz#2033603)


author: Martin Pitt <mpitt@redhat.com> - 263-1
changelog:
  - Overview: Show scheduled shutdowns
  - Networking: Add firewall service description
  - Shell: Fix browser history


author: Martin Pitt <mpitt@redhat.com> - 269-1
changelog:
  - Show base-10 units by default (rhbz#1970119)
  - Apps: Fix i18n (rhbz#2018389)
  - Software Updates: Install kpatches only (rhbz#2039989)
  - Machines: Fix deleting net interfaces with non-unique MAC address (rhbz#1867478)
  - Machines: Create disks with random/customizable serial number (rhbz#2036330)
  - Machines: Fix network interface source icon (rhbz#2063680)


author: Martin Pitt <mpitt@redhat.com> - 273-1
changelog:
  - Software Updates: Optionally reboot after updating
   - Machines: Show toast notication if VM's storage deletion fails (rhbz#2105984)


author: Matej Marusak <mmarusak@redhat.com> - 278-1
changelog:
  - Machines: Allow TRIM/UNMAP requests by default for newly added disks
  - Machines: Insert and eject CD & DVD media


author: Katerina Koukiou <kkoukiou@redhat.com> - 283-1
changelog:
  - Machines: Summarize system and user session differences
  - Machines: Virtual watchdog device support


author: Martin Pitt <mpitt@redhat.com> - 284-1
changelog:
  - Storage: Set up a system to use NBDE
  - Machines: Option to forcefully revert a snapshot
  - Fix tabular numbers font


author: Peter Robinson <pbrobinson@fedoraproject.org> - 1.8.2-1
changelog:
  - 1.8.2 stable release
  - http://ftp.gnome.org/pub/GNOME/sources/cogl/1.8/cogl-1.8.2.news
  - Enable gdk-pixbuf2 support - Fixes RHBZ # 738092


author: Adam Jackson <ajax@redhat.com> 1.8.2-4
changelog:
  - cogl-1.8.2-lp-no-framebuffer-blit.patch: Disable the subbuffer blit code
    when running on llvmpipe until it's unbroken.


author: Kalev Lember <kalevlember@gmail.com> - 1.17.4-1
changelog:
  - Update to 1.17.4, which includes soname bump
  - Build a temporary compat-libcogl19 subpackage to ease the rebuilds


author: mosquito <sensor.wen@gmail.com> - 1.22.2-7
changelog:
  - Add GL_ARB_shader_texture_lod and copy_sub_image support (#1421055)
  - Add pkgconfig(egl) BReq for rawhide
  - Move BReqs to pkgconfig


author: Richard Hughes <richard@hughsie.com> 0.1.7-1
changelog:
  - New upstream version.
  - Create /var/lib/colord at buildtime not runtime for SELinux
  - Ensure profiles with embedded profile checksums are parsed correctly
  - Move the colorimeter rules to be run before 70-acl.rules
  - Stop watching the client when the sensor is finalized
  - Ensure the source is destroyed when we unref CdUsb to prevent a crash
  - Only enable the volume mount tracking when searching volumes


author: Richard Hughes <richard@hughsie.com> 0.1.8-1
changelog:
  - New upstream version
  - Add a webcam device kind
  - Add a timestamp when making profiles default
  - Add support for reading and writing ICC profile metadata
  - Allow the client to pass file descriptors out of band to CreateProfile
  - Prettify the device vendor and model names
  - Split out the sensors into runtime-loadable shared objects
  - Provide some GIO async variants for the methods in CdClient
  - Ensure GPhoto2 devices get added to the device list


author: Richard Hughes <richard@hughsie.com> 0.1.11-2
changelog:
  - Remove the sedding libtool's internals as it breaks
    generation of the GObject Introspection data.


author: Richard Hughes <richard@hughsie.com> 0.1.13-1
changelog:
  - New upstream version
  - Ensure uid 0 can always create devices and profiles
  - Reduce the CPU load of clients when assigning profiles


author: Richard Hughes <richard@hughsie.com> 0.1.15-1
changelog:
  - New upstream version
  - This release fixes an important security bug: CVE-2011-4349.
  - Do not crash the daemon if adding the device to the db failed
  - Fix a memory leak when getting properties from a device


author: Richard Hughes <richard@hughsie.com> 0.1.16-1
changelog:
  - New upstream version
  - Now runs as a colord user rather than as root.
  - Support more ICC metadata keys
  - Install a systemd service file
  - Support 2nd generation Huey hardware


author: Richard Hughes <richard@hughsie.com> 0.1.17-1
changelog:
  - New upstream version
  - Add an LED sample type
  - Add PrivateNetwork and PrivateTmp to the systemd service file
  - Fix InstallSystemWide() when running as the colord user


author: Richard Hughes <richard@hughsie.com> 0.1.18-1
changelog:
  - New upstream version
  - Add a Manager.CreateProfileWithFd() method for QtDBus
  - Split out the SANE support into it's own process
  - Fix a small leak when creating devices and profiles in clients
  - Fix cd-fix-profile to add and remove metadata entries
  - Install per-machine profiles in /var/lib/colord/icc


author: Richard Hughes <richard@hughsie.com> 0.1.20-1
changelog:
  - New upstream version
  - Add a sensor-set-options command to the colormgr tool
  - Add the concept of 'options' on each color sensor device
  - Enable gtk-doc in the default distro build


author: Richard Hughes <richard@hughsie.com> 0.1.21-1
changelog:
  - New upstream version
  - Do not install any parts of colord-sane if --disable-sane is specified
  - Fix InstallSystemWide() by not writing a private file
  - Save the CCMX and ITx files to be compatible with argyllcms
  - The ColorHug has a new VID and PID


author: Richard Hughes <richard@hughsie.com> 0.1.22-1
changelog:
  - New upstream version
  - Split out colord-gtk to a new sub-project to prevent a dep loop
  - Add many generic introspection type arguments
  - Check any files in /usr/share/color/icc have the content type
  - Do not create the same object paths if two sensors are plugged in
  - Fix the udev rules entry for the i1Display3


author: Richard Hughes <richard@hughsie.com> 0.1.24-1
changelog:
  - New upstream version
  - Fix a critical warning when user tries to dump a non-icc file
  - Remove libsane support and rely only on udev for scanner information
  - Set the seat for devices created in the session and from udev


author: Richard Hughes <richard@hughsie.com> 0.1.25-1
changelog:
  - New upstream version
  - Add a create-standard-space sub-command to cd-create-profile
  - Add a profile metadata key of 'License'
  - Add a set-version command to the cd-fix-profile command line tool
  - Create linear vcgt tables when using create-x11-gamma
  - Fix GetStandardSpace so it can actually work
  - Move the named color examples to shared-color-profiles


author: Richard Hughes <richard@hughsie.com> 0.1.26-1
changelog:
  - New upstream version
  - Add a session helper that can be used to calibrate the screen
  - Add some defines for the Spyder4 display colorimeter
  - Add support for reading and writing .cal files to CdIt8
  - Add the ability to 'disable' a device from a color POV
  - Create ICCv2 profiles when using cd-create-profile
  - Use enumerated error values in the client library
  - Use spotread when there is no native sensor driver


author: Richard Hughes <richard@hughsie.com> 0.1.27-1
changelog:
  - New upstream version
  - Add some more calibration attach images
  - Import shared-color-profiles into colord
  - Install a header with all the session helper defines


author: Kalev Lember <kalevlember@gmail.com> 0.1.27-2
changelog:
  - Split out libcolord to colord-libs subpackage, so that the daemon package
    doesn't get multilibbed


author: Richard Hughes <richard@hughsie.com> 0.1.27-4
changelog:
  - Add BR systemd-devel so the seat tracking stuff works
  - Build with full compiler output
  - Do not build the profiles in parallel, backported from upstream
  - Limit the memory allocation to 2GiB when building profiles
  - Do not attempt to build the print profiles on ARM or PPC hardware


author: Richard Hughes <richard@hughsie.com> 0.1.28-1
changelog:
  - New upstream version
  - Add some default GSetting schema values for the calibration helper
  - Add the sensor images as metadata on the D-Bus interface
  - Quit the session helper if the device or sensor was not found


author: Richard Hughes <richard@hughsie.com> 0.1.29-1
changelog:
  - New upstream version
  - Add a --verbose and --version argument to colormgr
  - Add DTP94 native sensor support
  - Allow profiles to have a 'score' which affects the standard space
  - Change the Adobe RGB description to be 'Compatible with Adobe RGB (1998)'
  - Detect profiles from adobe.com and color.org and add metadata
  - Do not auto-add profiles due to device-id metadata if they have been removed
  - Ensure profiles with MAPPING_device_id get auto-added to devices
  - Install various helper libraries for access to hardware
  - Set the additional 'OwnerCmdline' metadata on each device


author: Richard Hughes <richard@hughsie.com> 0.1.30-1
changelog:
  - New upstream version
  - Append -private to the driver libraries as they have no headers installed
  - Do not show duplicate profiles when icc-profiles-openicc is installed
  - Speed up the daemon loading and use less I/O at startup


author: Richard Hughes <richard@hughsie.com> 0.1.31-1
changelog:
  - New upstream version
  - Calculate the display calibration based on the Lab and target display gamma
  - Interpolate the gamma data to the VCGT size using Akima
  - Add some more display vendor names to the display fixup table
  - Fix the argyll sensor driver when using the ColorMunki Smile
  - Fix the gamut warning to check primaries wider than CIERGB and ProPhoto
  - Move the private sensor libraries out of the pure lib space


author: Richard Hughes <richard@hughsie.com> 0.1.32-1
changelog:
  - New upstream version
  - Add a new tool 'cd-iccdump' that can dump V4 and V2 profiles
  - Add translated descriptions to the ICC profiles


author: Richard Hughes <richard@hughsie.com> 0.1.33-1
changelog:
  - New upstream version
  - Add some translated profile descriptions for the CMYK profiles
  - Add the FOGRA45L and FOGRA47L CMYK and eciRGBv1 profiles
  - Check the generated CCMX matrix for invalid data
  - Do not print a warning if the DBus property does not exist
  - Ensure mbstowcs() has an LC_CTYPE of 'en_US.UTF-8'
  - Always write C-locale floating point values in IT8 files
  - Initialize the value of the CCMX matrix
  - Never promote localized v2 ICC profiles to v4
  - Rename ISOnewspaper26 to IFRA26S_2004_newsprint


author: Richard Hughes <richard@hughsie.com> 0.1.34-1
changelog:
  - New upstream version
  - Add a ICC transform object for simple RGB conversions
  - Add a warning for RGB profiles with unlikely whitepoint values
  - Add Qt DBus annotations
  - Allow clients to call org.freedesktop.DBus.Peer
  - Correct a lot more company names when creating devices
  - Do not automatically add EDID profiles with warnings to devices
  - Increase the delay between patches in the session-helper
  - Install the bash completion support into /usr


author: Richard Hughes <richard@hughsie.com> 1.0.0-1
changelog:
  - New upstream version
  - Add a config option for monitors with identical EDID values
  - Allow a different input and output format in CdTransform
  - Build all installed binaries with PIE
  - Build the colord binary with full RELRO
  - Do not show a warning when using 'colormgr device-get-profile-for-qualifier'
  - Fix crash in cd-iccdump by working around an lcms2 bug
  - Fix using the color sensors on ARM hardware
  - Set the STANDARD_space metadata for the print profiles
  - Show all the translations when dumping an ICC profile


author: Richard Hughes <richard@hughsie.com> 1.0.1-1
changelog:
  - New upstream version
  - Do not unconditionally enable BPC on the color transform
  - Fix profile created time for non-UTC timezones
  - Record the gamma table in the session helper error message


author: Richard Hughes <richard@hughsie.com> 1.0.2-1
changelog:
  - New upstream version
  - Add cd_icc_save_data() so that we can easily set _ICC_PROFILE
  - Add CdIccStore to monitor directories of ICC profiles
  - Add SystemVendor and SystemModel properties to the main interface
  - Allow to specify a non-qualified path when using FindProfileByFilename
  - Allow using the key 'Filename' when using FindProfileByProperty
  - Always return the error if any sync method failed
  - Fix GObject introspection when getting lists
  - Fix GObject introspection when getting metadata


author: Richard Hughes <richard@hughsie.com> 1.1.1-1
changelog:
  - New upstream version
  - This release bumps the soname of libcolord as long deprecated methods have
    finally been removed. Any programs that link against libcolord will have to
    be recompiled against this new version.
  - This unstable branch is full of new features and experimental code, and
    therefore this release will be restricted to rawhide.
  - Remove the now-unused /etc/colord.conf
  - Update the colormgr man page to reflect reality


author: Richard Hughes <richard@hughsie.com> 1.1.2-1
changelog:
  - New upstream version
  - Add a 'dump' colormgr command to aid debugging
  - Allow profiles to be added or removed when the device is not enabled
  - Always return soft-add calibration profiles before soft-add EDID profiles
  - Do not mix up device paths and device IDs in the documentation
  - Fix an error when building the print profiles
  - Fix the AdobeRGB and WideGamutRGB gamma values
  - Fix up various vendor quirks
  - Migrate from usb_id and usb_db to udev builtins usb_id and hwdb
  - Set 'GAMUT_coverage(srgb)' when generating standard space profiles
  - Show a warning for incorrect or extra command line arguments
  - Use %ghost to avoid removing databases on upgrades
  - Use the exact D50 whitepoint values


author: Richard Hughes <richard@hughsie.com> 1.1.3-1
changelog:
  - New upstream version
  - Never print incomplete 'colormgr dump' output
  - Restrict the length of key and values when setting metadata


author: Richard Hughes <richard@hughsie.com> 1.1.4-1
changelog:
  - New upstream version
  - Only syslog() profile additions when they're added via DBus
  - Reset the LCMS log handlers to default after use
  - Use the threadsafe versions of the LCMS functions
  - Resolves: #1016425


author: Richard Hughes <richard@hughsie.com> 1.1.5-1
changelog:
  - New upstream version
  - Do not crash when moving the sensor position during calibration
  - Do not crash with zero-sized ICC file
  - Do not create legacy locations
  - Ensure the ICC version is set when creating from the EDID
  - Ensure the parsed EDID strings are valid UTF-8
  - Fix crash when using cd_color_get_blackbody_rgb()
  - Never add USB hubs as scanner devices even if tagged
  - Never create color managed webcam devices


author: Richard Hughes <richard@hughsie.com> 1.1.5-2
changelog:
  - Add conflict on icc-profiles-openicc
  - The OpenICC profiles are not really compatible for a few reasons:
   * The profiles are duplicates of the ones shipped in the colord package
   * The don't contain the correct metadata so the standard spaces show up in the
     device profile chooser.
   * The profiles don't contain an embedded ID, so colord has to hash them all
     manually at startup, which makes colord look bad in bootchart
   * A duplicate mime rule is installed which matches shared-mime-info one


author: Ville Skyttä <ville.skytta@iki.fi> - 1.1.5-3
changelog:
  - Move ldconfig %post* scriptlets to -libs.
  - Run test suite during build.
  - Fix bogus date in %changelog.


author: Richard Hughes <richard@hughsie.com> 1.1.6-1
changelog:
  - New upstream version
  - Fix the tag 'size' when viewing a profile in cd-iccdump
  - Only include libudev in Requires.private on Linux
  - Use the corect sensor-kind values for GretagMacbeth sensors
  - Do not use G_GNUC_WARN_UNUSED_RESULT when uninhibiting
  - Handle failure to initialise GUsb in self-tests


author: Richard Hughes <richard@hughsie.com> 1.1.7-1
changelog:
  - New upstream version
  - Use the new cmsContext functionality in LCMS 2.6
  - Fix the GObject introspection for cd_device_get_profiles()
  - Load the profile defaults when using cd_icc_create_default()


author: Richard Hughes <richard@hughsie.com> 1.2.0-1
changelog:
  - New upstream version
  - Correctly convert all of the image when using CdTransform
  - EDID strings can be up to 13 bytes
  - Use the corect sensor-kind values for GretagMacbeth sensors
  - libcolord: Add a RGB32 pixel format for GdkPixbuf
  - libcolord: Add a utility function to calculate an XYZ value from a CMF
  - libcolord: Fix a potential crash when destroying a CdIt8 object
  - libcolord: Support CCSS data files
  - libcolord: Support SPECTRAL_NORM in it8 files


author: Richard Hughes <richard@hughsie.com> 1.2.1-1
changelog:
  - New upstream version
  - Allow users to rename session and system ICC profiles
  - Fix building the CMF spectra on sparc64
  - Fix the style of two colorimeter figures
  - Make colord polkit policy usable on servers


author: Richard Hughes <richard@hughsie.com> 1.2.2-1
changelog:
  - New upstream version
  - Actually parse the EDID for better duplicate detection
  - Actually write a file when using cd_icc_save_default()
  - Bump the lcms2 dep to 2.6
  - Do not try to return a CdIcc instance for virtual profiles
  - Use the ColorHug sensor driver for the ColorHug2 hardware


author: Richard Hughes <richard@hughsie.com> 1.2.3-1
changelog:
  - New upstream version
  - Add driver features required for ColorHug2
  - Fix the device path to allow uid or username to be omitted


author: Richard Hughes <richard@hughsie.com> 1.2.4-1
changelog:
  - New upstream version
  - Don't enable PIE support when --without-pic is specified
  - libcolord: Build with PIE enabled
  - libcolorhug: Retry the command if the response is incomplete


author: Richard Hughes <richard@hughsie.com> 1.2.6-1
changelog:
  - New upstream version
  - Add lots of new libcolord spectral API
  - Return correct values when no LUMINANCE_XYZ_CDM2 is specified


author: Richard Hughes <richard@hughsie.com> 1.2.8-1
changelog:
  - New upstream version
  - Do not use the deprecated GUsbDeviceList
  - Fix possible critical warning when using g_dbus_watch_name()


author: Richard Hughes <richard@hughsie.com> 1.2.9-1
changelog:
  - New upstream version
  - Add support for the ColorHug ALS device
  - Fix reporting of logind errors
  - Return the exact address on verification failure


author: Richard Hughes <richard@hughsie.com> 1.2.11-1
changelog:
  - New upstream version
  - Add defines and artwork for the Spyder5 device
  - Add defines for the OceanOptics Spark sensor
  - Fix two small leaks in libcolord
  - Handle low-level ColorHug commands when in Sensor HID mode
  - Only return devices created by the calling user when doing GetDevices


author: Richard Hughes <richard@hughsie.com> 1.2.12-1
changelog:
  - New upstream version
  - Allow creating devices with the same device ID from different users
  - ColorHug: Add ch_device_queue_read_firmware()
  - ColorHug: When converting HEX to BIN pad out the entire size


author: Richard Hughes <richard@hughsie.com> 1.3.1-1
changelog:
  - New upstream version
  - Add a systemd user service corresponding to the D-Bus session service
  - Add a tmpfiles.d snippet to fix stateless systems
  - Add g_autoptr() defines for cd_color*
  - Add get-spectral-reading command to colormgr
  - Allow returning spectral readings from the Spark sensor
  - Ignore the ColorHug+ in DFU mode
  - Reset the sensor back to idle after each action


author: Richard Hughes <richard@hughsie.com> 1.3.2-1
changelog:
  - New upstream version
  - Add initial support for the v2 protocol used by ColorHug+
  - Fix a crash then calibrating monitors with broken EDIDs
  - Fix a hard-to-reproduce bug when cancelling async operations


author: Richard Hughes <richard@hughsie.com> 1.3.3-1
changelog:
  - New upstream version
  - Fix an assert failure when connecting to sensors
  - Increase timeout to 60s for argyll spotread sampling
  - Use the USB path to match the ArgyllCMS port


author: Richard Hughes <richard@hughsie.com> 1.3.4-1
changelog:
  - New upstream version
  - Add cd_color_rgb_from_wavelength()
  - Add cd_spectrum_resample_to_size()
  - Fix a possible NULL dereference when talking to Spark devices
  - Fix compile with -Wformat-signedness
  - Fix possible division by zero if parsing /proc/cpuinfo fails
  - Install the libcolordcompat.so in the main -libs package
  - Support enabling the illuminants on the ColorHug+


author: Richard Hughes <richard@hughsie.com> 1.4.0-1
changelog:
  - New upstream version
  - Port to the Meson build system
  - Correctly build the ICC transfer curve for Rec709
  - Do not spin the Huey LEDs when the sensor is embedded
  - Do not use /tmp to create profiles
  - Use a different Huey unlock code on the W700 laptop


author: Richard Hughes <richard@hughsie.com> 1.4.1-1
changelog:
  - New upstream version
  - Include all the files in the GIR target
  - Include the correct file when using Colord-1.0.gir
  - Use gio-2.0 when generating the VAPI


author: Richard Hughes <richard@hughsie.com> 1.4.2-1
changelog:
  - New upstream version
  - Avoid buffer overflow when reading profile_id
  - Fix the detection of duplicate EDIDs
  - Set cd-create-profile date to SOURCE_DATE_EPOCH


author: Richard Hughes <richard@hughsie.com> 1.4.3-1
changelog:
  - New upstream version
  - Make cd_color_get_blackbody_rgb_full() more accurate
  - Update style of Meson build options


author: Richard Hughes <richard@hughsie.com> 1.4.4-1
changelog:
  - New upstream version
  - Actually install the installed tests
  - Port manpages to xsltproc and DocBook 5


author: Richard Hughes <richard@hughsie.com> 1.4.5-1
changelog:
  - New upstream version
  - Add new API for gnome-settings-daemon
  - Check for errors from more sqlite calls
  - Fix owner and permissions on existing state files
  - Fix segfault due to dereferencing NULL pointer
  - Make the build reproductible


author: Richard Hughes <richard@hughsie.com> 0.1.22-2
changelog:
  - Backport a patch from git master that fixes an include issue with
    projects that want to use colord-gtk.h and colord.h at the same time.


author: Richard Hughes <richard@hughsie.com> 0.1.25-1
changelog:
  - New upstream version.
  - Give the sample widget slightly curved corners and a gray outline
  - Do not use deprecated functions from libcolord
  - Fix warnings when building ColordGtk-1.0.gir
  - Fix up the licence boilerplate for CdSampleWidget


author: Richard Hughes <richard@hughsie.com> 0.1.26-1
changelog:
  - New upstream version.
  - Install the cd-convert utility
  - Do not link against the unused gio-unix-2.0


author: Jan Grulich <jgrulich@redhat.com> - 0.26-1
changelog:
  - Spec file based on exiv2 package to provide old libraries before API change
    Resolves: bz#1757349


author: Jan Grulich <jgrulich@redhat.com> - 0.26-4
changelog:
  - Fix heap-based buffer overflow vulnerability in jp2image.cpp that may lead to DoS
    Resolves: bz#1990398

  - Integer overflow in CrwMap:encode0x1810 leading to heap-based buffer overflow and DoS
    Resolves: bz#1990399


author: Jan Grulich <jgrulich@redhat.com> - 0.26-6
changelog:
  - Fix out-of-bounds read in Exiv2::Jp2Image::printStructure
    Resolves: bz#1993283

  - Fix out-of-bounds read in Exiv2::Jp2Image::encodeJp2Header
    Resolves: bz#1993246


author: Jan Synáček <jsynacek@redhat.com> - 5:1.8.8-2
changelog:
  - Move unversioned .so files to -devel package
  - Remove unnecessary %clear
  - Use %global instead of %define
  - Remove unnecessary (compatible) licenses
  - Fix %post onliner
  - Compile with --as-needed
  - Add _isa flag where appropriate
  - Correctly specify Provides and Obsoletes
  - Rename to guile-compat18


author: Jan Synáček <jsynacek@redhat.com> - 1.8.8-4
changelog:
  - Bump Provides/Obsoletes by a release
  - Add Provides/Obsoletes to -devel package as well
  - Add a comment about unversion libraries
  - Fix mixed tabs/spaces (remove tabs)


author: yangxiaoxuan <yangxiaoxuan@openanolis.org> - 4.8.5-36.1.0.1
changelog:
  - Modify the release information and add the bugzilla address of openanolis
  - Resolve doc build error


author: Tomáš Mráz <tmraz@redhat.com> 1.0.2j-3
changelog:
  - add back -devel subpackage as a stop-gap measure for software
    that cannot be ported to new API easily


author: Tomáš Mráz <tmraz@redhat.com> 1.0.2m-1
changelog:
  - minor upstream release 1.0.2m fixing security issues
  - fix locking of RNG in FIPS mode for some obscure use-cases


author: Clemens Lang <cllang@redhat.com> - 1:1.0.2o-4
changelog:
  - Fix CVE-2022-0778: Infinite loop in BN_mod_sqrt() reachable when parsing certificates
    Resolves: rhbz#2077417


author: Jindrich Novy <jnovy@redhat.com> - 2:2.0.27-2
changelog:
  - switch to master branch to fix /dev/null ownership issues
    (https://github.com/containers/conmon/commit/372fa19211cfeabdb2bad52a4ab8a4d1b0b0063c)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 2:2.0.27-4
changelog:
  - update to the latest content of https://github.com/containers/conmon/tree/master
    (https://github.com/containers/conmon/commit/3161452)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 2:2.0.27-5
changelog:
  - update to the latest content of https://github.com/containers/conmon/tree/master
    (https://github.com/containers/conmon/commit/b033cb5)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 2:2.0.27-6
changelog:
  - update to the latest content of https://github.com/containers/conmon/tree/master
    (https://github.com/containers/conmon/commit/75e067e)
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 2:2.1.2-2
changelog:
  - update to latest content of https://github.com/containers/conmon/releases/tag/2.1.2
    (https://github.com/containers/conmon/commit/2bc95ee697e87d5f7b77063cf83fc32739addafe)
  - Related: #2061390


author: Lokesh Mandvekar <lsm5@fedoraproject.org> - 0.5.2-2
changelog:
  - upstream moved to github.com/containernetworking/plugins
  - built commit dcf7368
  - provides: containernetworking-plugins
  - use vendored deps because they're a lot less of a PITA
  - excludearch: s390x for now (rhbz#1466865)


author: Jindrich Novy <jnovy@redhat.com> - 0.8.1-2
changelog:
  - backport https://github.com/coreos/go-iptables/pull/62
    from Michael Cambria
  - Resolves: #1627561


author: Jindrich Novy <jnovy@redhat.com> - 1:1.0.1-2
changelog:
  - revert back to https://github.com/containernetworking/plugins/releases/tag/v1.0.1
  - Related: #2061390


author: Jindrich Novy <jnovy@redhat.com> - 1:1.0.1-2
changelog:
  - revert back to https://github.com/containernetworking/plugins/releases/tag/v1.0.1
  - Related: #2001445


author: Jindrich Novy <jnovy@redhat.com> - 1:1.1.1-4
changelog:
  - rebuild for following CVEs:
  CVE-2022-41724 CVE-2022-41725 CVE-2023-24538 CVE-2023-24534 CVE-2023-24536 CVE-2022-41723 CVE-2023-24539 CVE-2023-24540 CVE-2023-29400
  - Resolves: #2179944
  - Resolves: #2187342
  - Resolves: #2187360
  - Resolves: #2203693
  - Resolves: #2207506


author: Colin Walters <walters@verbum.org> - 0.1.2-10
changelog:
  - Forked from Fedora
  - I forgot about the weird `rust-` package name prefixing when
    asking RCM to make the dist-git repo, and rather than redo
    that I decided to just go with it.
  - Stop depending on systemd-rpm-macros since it's not in RHEL8 apparently
  - Drop other things only applicable to Fedora Rust packaging like
    dynamic buildrequires


author: Dusty Mabe <dusty@dustymabe.com> - 0.2.0-2
changelog:
  - Fix bug in dracut hook in legacy installer; see
    https://github.com/coreos/coreos-installer/pull/234


author: Benjamin Gilbert <bgilbert@redhat.com> - 0.6.0-3
changelog:
  - Fix MBR handling when partition saving is enabled
  - Fix base package Obsoletes being interpreted as part of package description


author: Jonathan Lebon <jlebon@redhat.com> - 0.9.1-4
changelog:
  - Add xz-devel BR to ensure we're not bundling
    Related: https://bugzilla.redhat.com/show_bug.cgi?id=1974453


author: Antonio Murdaca <runcom@redhat.com> - 0.9.1-19
changelog:
  - add a new coreos-installer-dracut subpkg to include just the
    dracut module (fedora-iot/coreos-installer-dracut)


author: Steven Dake <sdake@redhat.com> - 0.91-2
changelog:
  - use /sbin/service instead of calling init script directly.
  - put corosync-objctl man page in the main package.
  - change all initrddir to initddir for fedora 10 guidelines.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.92-4.svn1707
changelog:
  - Update to svn trunk at revision 1707 from upstream.
  - Update spec file to include new lcrso services and include file.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.92-5.svn1709
changelog:
  - Update to svn trunk at revision 1709 from upstream.
  - Update spec file to include new include files.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.92-6.svn1750
changelog:
  - Update to svn trunk at revision 1750 from upstream.
  - Include new quorum service in the packaging.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.92-7.svn1756
changelog:
  - Update to svn trunk at revision 1756 from upstream.
  - Add support pkgconfig to devel package.
  - Tidy up spec files by re-organazing sections according to packages.
  - Split libraries from corosync to corosynclib.
  - Rename corosync-devel to corosynclib-devel.
  - Comply with multiarch requirements (libraries).


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.93-1
changelog:
  - New upstream release.
  - Drop alphatag from spec file.
  - Drop trunk patch.
  - Update Provides for corosynclib-devel.
  - Backport gcc-4.4 build fix from trunk.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.93-2
changelog:
  - Rename gcc-4.4 patch to match svn commit (r1767).
  - Backport patch from trunk (commit r1774) to fix quorum engine.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.94-1
changelog:
  - New upstream release.
  - Drop obsolete patches.
  - Add soname bump patch that was missing from upstream.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.94-2.svn1792
changelog:
  - Import fixes from upstream:
    * Fix uninitialized memory. Spotted by valgrind (1788)
    * Fix logsys_set_format by updating the right bits (1789)
    * logsys: re-add support for timestamp  (1790)
    * Fix cpg crash (1791)
    * Allow logsys_format_set to reset to default (1792)


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.94-3.svn1794
changelog:
  - Import fixes from upstream:
    * Add reserve/release feature to totem message queue space (1793)
    * Fix CG shutdown (1794)


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.94-4.svn1797
changelog:
  - Import fixes from upstream:
    * Cleanup logsys format init around to use default settings (1795)
    * logsys_format_set should use its own internal copy of format_buffer (1796)
    * Add logsys_format_get to logsys API (1797)
  - Cherry pick svn1807 to unbreak CPG.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.95-1
changelog:
  - New upstream release
  - spec file updates:
    * Drop alpha tag
    * Drop local patches (no longer required)
    * Allow to build from svn trunk by supporting rpmbuild --with buildtrunk 
    * BuildRequires autoconf automake if building from trunk
    * Execute autogen.sh if building from trunk and if no configure is available
    * Switch to use rpm configure macro and set standard install paths
    * Build invokation now supports _smp_mflags
    * Remove install section for docs and use proper doc macro instead
    * Add tree fixup bits to drop static libs and html docs (only for now)
    * Add LICENSE file to all subpackages
    * libraries have moved to libdir. Drop ld.so.conf.d corosync file
    * Update BuildRoot usage to preferred versions/names


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.97-1.svn2232
changelog:
  - New upstream release
  - spec file updates:
    * Drop pkgconfig fix that's now upstream
    * Update to svn version 2232
    * Define buildtrunk if we are using svn snapshots
    * BuildRequires: nss-devel to enable nss crypto for network communication
    * Force autogen invokation if buildtrunk is defined
    * Whitespace cleanup
    * Stop shipping corosync.conf in favour of a generic example
    * Update file list


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.98-1
changelog:
  - New upstream release
  - spec file updates:
    * Drop corosync-trunk patch and alpha tag.
    * Fix alphatag vs buildtrunk handling.
    * Drop requirement on ais user/group and stop creating them.
    * New config file locations from upstream: /etc/corosync/corosync.conf.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.1.0-1
changelog:
  - New upstream release
  - spec file updates:
    * enable IB support
    * explicitly define built-in features at configure time


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.2.0-1
changelog:
  - New upstream release
  - Use global instead of define
  - Update Source0 url
  - Use more name macro around
  - Cleanup install section. Init script is now installed by upstream
  - Cleanup whitespace
  - Don't deadlock between package upgrade and corosync condrestart
  - Ship service.d config directory
  - Fix Conflicts vs Requires
  - Ship new sam library and man pages


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.2.2-1
changelog:
  - New upstream release
  - Add upstream trunk revision 2770 to add cpg_model_initialize api.
  - Fix URL and Source0 entries.
  - Add workaround to broken 1.2.2 Makefile with make -j.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.3.0-1
changelog:
  - New upstream release
  - drop upstream patch revision-2770.patch now included in release
  - update spec file to ship corosync-blackbox


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 1.99.2-1
changelog:
  - New upstream release
  - Re-enable xmlconfig bits
  - Ship cmap man pages
  - Add workaround to usrmove breakage!!


author: Jan Friesse <jfriesse@redhat.com> 2.3.1-3
changelog:
  - Resolves: rhbz#998362

  - Fix scheduler pause-detection timeout (rhbz#998362)
  - merge upstream commit 2740cfd1eac60714601c74df2137fe588b607866 (rhbz#998362)


author: Jan Pokorný <jpokorny+rpm-corosync@redhat.com> - 2.99.3-3
changelog:
  - Rebuild again, since the previous one was so unfortunate it got affected
    with binutils (2.31.1-3.fc29) producing non-monotonically increasing
    section offsets causing unprepared eu-strip to damage the binary
    (related: rhbz#1609577)
  - Apply patch to prevent redundancy in systemd journal


author: Jan Friesse <jfriesse@redhat.com> - 3.1.0-2
changelog:
  - Add isa version of corosync-devel
  - Add release to corosync-devel version to match autogenerated
    corosynclib-devel provides


author: Jan Friesse <jfriesse@redhat.com> - 3.1.4-1
changelog:
  - Related: rhbz#1948974
  - Resolves: rhbz#1967485

  - New upstream release (rhbz#1948974)
  - stats: fix crash when iterating over deleted keys (rhbz#1967485)


author: Jan Friesse <jfriesse@redhat.com> - 3.1.5-3
changelog:
  - Resolves: rhbz#2024652
  - Resolves: rhbz#2024657

  - totem: Add cancel_hold_on_retransmit config option (rhbz#2024652)
  - merge upstream commit cdf72925db5a81e546ca8e8d7d8291ee1fc77be4 (rhbz#2024652)
  - totemsrp: Switch totempg buffers at the right time (rhbz#2024657)
  - merge upstream commit e7a82370a7b5d3ca342d5e42e25763fa2c938739 (rhbz#2024657)


author: Jan Friesse <jfriesse@redhat.com> - 3.1.5-4
changelog:
  - Resolves: rhbz#2070623

  - logrotate: Use copytruncate method by default (rhbz#2070623)
  - merge upstream commit 04362046c4a9d7307feb5b68341d567b7d0b94d6 (rhbz#2070623)


author: Marek Polacek <polacek@redhat.com> 8.2.1-1.3
changelog:
  - change the default -march on s390x to z13 with tuning for z14 (#1571124)
  - use --disable-multilib on s390x


author: Jeff Law <law@redhat.com> 8.2.1-3.4
changelog:
  - Backport PPC string inlines from trunk which allow for valgrind's
    memcheck to work properly (#1652929)
  - Backport bugfix for clz pattern on s390 affecting jemalloc (#1652016)


author: Marek Polacek <polacek@redhat.com> 8.3.1-3
changelog:
  - update from Fedora 8.3.1-3 (#1680182)
  - remove load and test FP splitter (#1673116)
  - fix *movsi_from_df (#1677652)
  - add missing headers
  - add support for live patching (#1668903)
  - retire gcc8-rh1612514.patch, gcc8-rh1652016.patch, gcc8-rh1652929-?.patch


author: Marek Polacek <polacek@redhat.com> 8.3.1-4
changelog:
  - update from Fedora 8.3.1-4 (#1680182)
  - drop gcc8-pr60790.patch, gcc8-pr89629.patch, gcc8-rh1668903-4.patch


author: Marek Polacek <polacek@redhat.com> 8.3.1-4.2
changelog:
  - backport the -fuse-ld=lld option (#1670535)
  - TLS model fix (#1678555, PR c++/85400)
  - two small autoFDO fixes (#1686082)
  - libgomp update (#1707568)
  - member template redeclaration fix (#1652704, PR c++/86747)
  - turn libgcc_s.so into a linker script on i?86, x86_64, ppc64le and also on
    ppc and ppc64 for 64-bit multilib (#1708309)
  - avoid using unaligned vsx or lxvd2x/stxvd2x for memcpy/memmove inline
    expansion (#1666977)


author: Marek Polacek <polacek@redhat.com> 8.3.1-4.5
changelog:
  - fix shift count operand printing (#1730380)
  - fix tree-outof-ssa.c ICE with vector types (PR middle-end/90139, #1730454)
  - fix out-of-ssa with unsupported vector types (PR rtl-optimization/90756,
    - fix ICE with template placeholder for TTP (PR c++/86098, #1730454)


author: Marek Polacek <polacek@redhat.com> 8.3.1-5
changelog:
  - update from Fedora gcc-8.3.1-5 (#1747157)
  - use unspec_volatile for darn (PR target/91481, #1760205, CVE-2019-15847)


author: Marek Polacek <polacek@redhat.com> 8.3.1-5.1
changelog:
  - consider negative edges in cycle detection (#1817991, PR gcov-profile/91601)
  - fix Fortran debug info for arrays with descriptors (#1655624,
    PR fortran/92775)
  - fix wrong code emitted for movv1qi on s390x (#1784758, PR target/92950)


author: Marek Polacek <polacek@redhat.com> 8.4.1-1
changelog:
  - update from GCC 8.4 release (#1868446)
  - remove symlinks to 32-bit versions of these static libraries: libasan.a,
    libitm.a, libquadmath.a, libubsan.a, libgfortran.a (#1779597)


author: Marek Polacek <polacek@redhat.com> 8.5.0-2
changelog:
  - revert upstream PR85873 gcc-8 fix, apply the fix from gcc-9 (#1960701)
  - fix 'this' adjustment for devirtualized call (PR c++/100797, #1965951)


author: Marek Polacek <polacek@redhat.com> 8.5.0-13
changelog:
  - require docbook-style-xsl instead of docbook5-style-xsl (#2073888)
  - backport Default widths with -fdec-format-defaults patch (#2074614)


author: Marek Polacek <polacek@redhat.com> 8.5.0-17
changelog:
  - fix deserialization for std::normal_distribution (#2130392,
    PR libstdc++/105502)
  - initialize std::normal_distribution::_M_saved (PR libstdc++/99536)
  - reject std::make_shared<T[]> (PR libstdc++/99006)


author: Xue haolin <xuehaolin@openanolis.org> 8.5.0-18.0.1
changelog:
  - Rebrand for Anolis OS. (xuehaolin@openanolis.org)
  - Add loongarch support. (lixing@loongson.cn)
  - Fixup LoongArch configure file error. (lixing@loongson.cn)
  - rename mt file for LoongArch. (lixing@loongson.cn)
  - Fixup LoongArch atomic_exchange error. (lixing@loongson.cn)
  - Remove loongarch64 arch (wb-zh951434@alibaba-inc.com)


author: Ville Skyttä <ville.skytta@iki.fi> - 1.48-2
changelog:
  - Build with system tinyxml and support for rules.
  - Run test suite during build, don't include its sources in docs.
  - Drop readme.txt from docs, it doesn't contain useful info after installed.


author: Ville Skyttä <ville.skytta@iki.fi> - 1.51-2
changelog:
  - Include man page and more other docs.
  - Build with $RPM_LD_FLAGS.
  - Improve summary and description.


author: Dodji Seketeli <dodji@redhat.com> - 2.4-1
changelog:
  - Update to 2.4 upstream tarball
  - Drop patches: cppcheck-1.83-tinyxml.patch, cppcheck-1.81-translations.patch, cppcheck-1.78-cfgdir.patch.
  - Bump BuildRequires for tinyxml2-devel to 2.6.0 at least.
  - Add BuildRequires pandoc.
  - There is no more bundled tinyxml in this new version of cppcheck.
  - Use the man/build-html.sh script to build the html version of the manual
  - Adjust $datadir/CppCheck to $datadir/Cppcheck.
  - Add $bindir/cppcheck*.qm files to the package.
  - Resolves: rhbz#1959478


author: Patrice Dumas <pertusus@free.fr> 1.12.0-3
changelog:
  - add rightly files to -devel (#224106)
  - add necessary requires for -devel (#224106)
  - ship examples


author: Patrice Dumas <pertusus@free.fr> 1.12.0-4
changelog:
  - remove libdir reference to cppunit-config, should fix multiarch conflict
    (#340951)
  - fix encoding and remove windows related files in examples
  - keep timestamps


author: Jay Fenlason <fenlason@redhat.com> 3.5-2
changelog:
  - remove ppc from arch list, since it doesn't work with ppc64 kernels
  - remove alpha from the arch list since we don't build it any more


author: Dave Anderson <anderson@redhat.com> 3.8-3
changelog:
  - remove (harmless) error message during ia64 diskdump invocation when
    an SMP system gets booted with maxcpus=1
  - several 2.6 kernel specific updates


author: Dave Anderson <anderson@redhat.com> 3.10-9
changelog:
  - Updated source package to crash-3.10.tar.gz, containing
    IBM's final ppc64 processor support for RHEL4
  - Fixes potential "bt -a" hang on dumpfile where netdump IPI interrupted
    an x86 process while executing the instructions just after it had entered
    the kernel for a syscall, but before calling the handler.  BZ #139437
  - Update to handle backtraces in dumpfiles generated on IA64 with the
    INIT switch (functionality intro'd in RHEL3-U5 kernel).  BZ #139429
  - Fix for handling ia64 and x86_64 machines booted with maxcpus=1 on
    an SMP kernel.  BZ #139435
  - Update to handle backtraces in dumpfiles generated on x86_64 from the
    NMI exception stack (functionality intro'd in RHEL3-U5 kernel).
  - "kmem -[sS]" beefed up to more accurately verify slab cache chains
    and report errors found.
  - Fix for ia64 INIT switch-generated backtrace handling when
    init_handler_platform() is inlined into ia64_init_handler();
    properly handles both RHEL3 and RHEL4 kernel patches.
    BZ #138350
  - Update to enhance ia64 gdb disassembly output so as to
    symbolically display call targets from kernel module
    text without requiring module debuginfo data.


author: Dave Anderson <anderson@redhat.com> 3.10-13
changelog:
  - Compiler error- and warning-related fixes for gcc 4 build.
  - Update to enhance x86 and x86_64 gdb disassembly output so as to
    symbolically display call targets from kernel module text without
    requiring module debuginfo data.
  - Fix hole where an ia64 vmcore could be mistakenly accepted as a
    usable dumpfile on an x86_64 machine, leading eventually to a
    non-related error message.


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.1
changelog:
  - Updated crash.patch to bring it up to 4.0-2.26, which should 
    address BZ #191719 - "crash fails to build in mock"


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.2
changelog:
  - Updated crash.patch such that <asm/segment.h> is not #include'd
    by lkcd_x86_trace.c; also for BZ #191719


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.3
changelog:
  - Updated crash.patch such that <asm/page.h> is not #include'd
    by vas_crash.h; only ia64 build complained; BZ #191719


author: Dave Anderson <anderson@redhat.com> - 4.0-2.26.4
changelog:
  - Updated crash.patch such that <asm/page.h> is not #include'd
    by s390_dump.c; IBM did not make the file s390[s] only; BZ #192719


author: Dave Anderson <anderson@redhat.com> - 4.0-3.1
changelog:
  - Updated crash.patch to match upstream version 4.0-3.1.
  - Added kdump reference to description.
  - Added s390 and s390x to ExclusiveArch list.  BZ #199125
  - Removed LKCD v1 pt_regs references for s390/s390x build.
  - Removed LKCD v2_v3 pt_regs references for for s390/s390x build.


author: Dave Anderson <anderson@redhat.com> - 4.0-3.3
changelog:
  - Updated crash.patch to match upstream version 4.0-3.3.
  - Support for x86_64 relocatable kernels.  BZ #204557


author: Dave Anderson <anderson@redhat.com> - 4.0-6.0.4
changelog:
  - First attempt at addressing the GCC 4.3 build, which failed on x86_64
    because ptrace-abi.h (included by ptrace.h) uses the "u32" typedef,
    which relies on <asm/types.h>, and include/asm-x86_64/types.h
    does not not typedef u32 as done in include/asm-x86/types.h.


author: Dave Anderson <anderson@redhat.com> - 4.0-6.0.5
changelog:
  - Second attempt at addressing the GCC 4.3 build, which failed due
    to additional ptrace.h includes in the lkcd vmdump header files.


author: Dave Anderson <anderson@redhat.com> - 4.0-7.7.1
changelog:
  - Updates to this file per crash merge review
  - Update to upstream version 4.0-7.7.  Full changelog viewable in:
      http://people.redhat.com/anderson/crash.changelog.html


author: Lubomir Rintel <lkundrak@v3.sk> - 4.0.8.11-1
changelog:
  - Update to later upstream release
  - Fix abuse of Revision tag

  - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild


author: Dave Anderson <anderson@redhat.com> - 4.0.9-1
changelog:
  - Update to upstream release, which allows the removal of the 
    Revision tag workaround, the crash-4.0-8.11-dwarf3.patch and 
    the crash-4.0-8.11-optflags.patch


author: Dave Anderson <anderson@redhat.com> - 5.1.8-1
changelog:
  - Update to latest upstream release
  - Additional fixes for gcc-4.6 -Werror compile failures for ARM architecture.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 7.0.4-2
changelog:
  - crash bundles gdb which bundles libiberty.  Add virtual Provides for
    libiberty tracking.  Open a bug for unbundling gdb RHBZ#1044119


author: Dave Anderson <anderson@redhat.com> - 7.0.5-1
changelog:
  - Update to latest upstream release
  - Use system readline library
  - Fix "crash --log vmcore" command for 3.11 and later kernels.


author: Dave Anderson <anderson@redhat.com> - 7.0.8-1
changelog:
  - Update to latest upstream release
  - Add ppc64le as supported architecture for crash package (BZ #1136050)


author: Lianbo Jiang <lijiang@redhat.com> - 8.0.0-3
changelog:
  - Fix segmentation fault caused by crash extension modules
  - Support the overflow stack exception handling on aarch64


author: Lianbo Jiang <lijiang@redhat.com> - 8.0.0-5
changelog:
  - Fix segfault on aarch64 for "bt -a|-c" command
  - Fix segfault for the "l" command of gdb
  - Fix HZ calculation on Linux 5.14 and later
  - Fix for other issues


author: Lianbo Jiang <lijiang@redhat.com> - 8.0.2-2
changelog:
  - Fix an assertion failure in the gdb's copy_type()
  - Fix for "bt" command printing "bogus exception frame" warning


author: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> - 1.0-1
changelog:
  - Remove inclusion of kvmdump.h and unwind_x86_64.h due to non-supporting issue
    on crash-devel package. Instead, use a new interface for them.
  - Remove ppc64, ia64, s390 and s390x from ExclusiveArch, leave x86_64
    and %{ix86} there.
  - Add descriptions in BuildRequires and Requires about crash and crash-devel.


author: Dave Anderson <anderson@redhat.com> - 1.3.1-3
changelog:
  - Fix x86_64 "invalid structure member offset: thread_struct_fs"
    Resolves: rhbz#1589019
  - Fix arm64 "invalid structure member offset: thread_struct_fpsimd_state"
    Resolves: rhbz#1625810


author: Bhupesh Sharma <bhsharma@redhat.com> - 1.5.1-1
changelog:
  - Rebase crash-gcore-command to github upstream version crash-gcore-command-1.5.1
    Resolves: rhbz#1851747


author: Bhupesh Sharma <bhsharma@redhat.com> - 1.6.0-1
changelog:
  - Rebase crash-gcore-command to github upstream version crash-gcore-command-1.6.0
    Resolves: rhbz#1903465


author: Tao Liu <ltao@redhat.com> - 1.6.3-2
changelog:
  - Rebase to upstream crash-gcore-command-1.6.3
  - Fix memory allocation failure issue
  - Resolves: rhbz#2060355


author: Dave Anderson <anderson@redhat.com> - 1.0.3-2.el7
changelog:
  - Add RPM_OPT_FLAGS to gcc line in ptdump.mk
    Resolves: rhbz#1450708
  - Set gdb scope to get appropriate ring_buffer structure
    Resolves: rhbz#1451181


author: Dave Anderson <anderson@redhat.com> - 1.0.3-5
changelog:
  - ptdump: fix build warning: warning: this ‘if’ clause does not guard
  - ptdump: fix failure: ptdump: invalid size request: 0 type: "read page for write" 
  - ptdump: fix heap memory and fd leak when fault happens
    Resolves: rhbz#1786497


author: Lianbo Jiang <lijiang@redhat.com> - 1.0.7-2
changelog:
  - Fix for "current buffer not found"
  - Fix for "invalid kernel virtual address: 0  type: struct topa_entry"
  - Fix for "invalid ring_buffer"
    Resolves: rhbz#1838927


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.4-1
changelog:
  - New mergerepo params: --all, --noarch-repo and --method
  - Fix segfault when more than one --excludes param used


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.7-1
changelog:
  - SQLite support
  - Bash completion
  - createrepo_c support for --compress-type param
  - Improved logging
  - Subpackages -devel and -libsi
  - Relicensed to GPLv2
  - Doxygen documentation in devel package
  - README update


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.8-1
changelog:
  - New interface of repomd module
  - New cmd options: --repo --revision --distro --content --basedir
  - New createrepo_c specific cmd option --keep-all-metadata
  - Few bugfixes


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.9-1
changelog:
  - Some changes in library interface
  - Memory usage optimalization
  - Fix a segfault and a race condition
  - New cmd options: --read-pkgs-list and --retain-old-md param
  - Few other bugfixes


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.11-1
changelog:
  - Deterministic output! Packages in output repodata are now sorted
  by ASCII value
  - Support for Koji mergerepos behaviour in mergerepo_c
  (new --koji, --groupfile and --blocked params)
  - Better atomicity while finall move .repodata/ -> repodata/
  - Repomd module supports pkgorigins record
  - Some new functions in misc module
  - Small changes in library interface


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.15-1
changelog:
  - Fix bug in final move from .repodata/ -> repodata/
  - Fix warnings from RPM library. RPM library is thread-unsafe. This
  includes also reading headers. Use of empty keyring for rpm transaction
  should work around the problem.


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.16-1
changelog:
  - Fix usage of rpm keyring (RhBug:918645)
  - More generic interface of repomd module
  - Code refactoring
  - Add some usage examples into the doxygen documentation and .h files
  - Rename version constants in version.h
  - New function cr_package_nevra (returns package nevra string)


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.16-2
changelog:
  - Remove creation of own empty rpm keyring for a transaction set.
  This is not necessary since rpm-4.8.0-28 (rpm commit
  cad147070e5513312d851f44998012e8f0cdf1e3). Moreover, own rpm keyring
  causes a race condition in threads (causing double free()) which use
  rpmReadPackageFile() called from cr_package_from_rpm().


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.17-1
changelog:
  - Fix double free() when old metadata parsing failed. (related to RhBug: 920795)
  - Convert all strings to UTF-8 while dumping XML. (related RhBug: 920795)


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.1.17-3
changelog:
  - mergerepo_c: Add --simple-md-filenames and --unique-md-filenames
  options. (RhBug: 950994)
  - mergerepo_c: Always include noarch while mimic koji
  mergerepos. (RhBug: 950991)
  - Rename cr_package_parser_shutdown to cr_package_parser_cleanup()
  - cr_db_info_update is now safe from sqlinjection.


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.2.0-1
changelog:
  - Speedup (More parallelization)
  - Changed C API
  - Add python bindings
  - A lot of bugfixes
  - Add new make targets: tests (make tests - builds c tests) and test
    (make test - runs c and python test suits).
  - Changed interface of most of C modules - Better error reporting
    (Add GError ** param).
  - Experimental Python bindings (Beware: The interface is not final yet!).
  - package: Add cr_package_copy method.
  - sqlite: Do not recreate tables and triggers while opening existing db.
  - mergerepo_c: Implicitly use --all with --koji.
  - Man page update.


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.2.1-2
changelog:
  - More effort to avoid residual .repodata/ directory on error
  - Add deltarepo and python-deltarepo subpackages
  - Add modifyrepo_c
  - Add documentation for python bindings
  - Refactored code & a lot of little bug fixes


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.2.2-1
changelog:
  - Temporary remove deltarepo subpackages
  - cmake: Do not install deltarepo stuff yet
  - helper: Removed cr_remove_metadata() and cr_get_list_of_md_locations()
  - Add module helpers
  - Sanitize strings before writting them to XML or sqlitedb (ISSUE #3)


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.3.0-1
changelog:
  - Relevant only for developers using createrepo_c library: New approach for
    metadata loading in case of internal high-level parser functions (see commit
    messages for more information: d6ed327595, 0b0e75203e, ad1e8450f5)
  - Support for changelog limit value == -1 (include all changelogs)
  - Update debug compilation flags
  - Update man pages (Add synompsis with usage)
  - Update usage examples in help


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.4.0-1
changelog:
  - Change default behavior of repodata files handling. (RhBug: 1094539)
    See: https://github.com/Tojaj/createrepo_c/wiki/New-File-Handling
    By default, createrepo leaves old groupfiles (comps files)
    in the repodata/ directory during update.
    Createrepo_c did the same thing but the version 0.4.0 changes this behaviour.


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.4.1-1
changelog:
  - Initialize threads correctly on old versions of GLib2 (RhBug: 1108787)
  - Do not print log domain (get rid off C_CREATEREPOLIB prefix in log messages)
  - Implements support for --cachedir
  - New option --retain-old-md-by-age
  - Few small API changes


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.7.0-1
changelog:
  - deltarpms: Update module to work with current version of drpm
  - mergerepo_c: Add --omit-baseurl option
  - craterepo_c: Gen empty repo if empty pkglist is used
  - Docs: Output python docs to separate directory
  - Several small fixes


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.7.3-1
changelog:
  - xml_parser: Add file path into error messages
  - Refactor: Replace g_error() with g_critical() (RhBug: 1162102)


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.7.4-1
changelog:
  - createrepo_c, mergerepo_c: Follow redirs by default while downloading remote repos
  - mergerepo_c: Fix segfault when a package without sourcerpm is part of metadata and --koji option is used


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.7.5-1
changelog:
  - Python repomd: Support for iteration and indexing by type - e.g. record = repomd['primary']
  - Show warning if an XML parser probably parsed a bad type of medata (New XML parser warning type CR_XML_WARNING_BADMDTYPE)
  - drpm library: Explicitly try to locate libdrpm.so.0
  - deltarpms: Don't show options for delta rpms if support is not available


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.7.7-1
changelog:
  - Proper directory for temporary files when --local-sqlite is used (Issue #12)
  - Bring bash completion install dir and filenames up to date with current bash-completion


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.8.0-1
changelog:
  - New tool Sqliterepo_c - It generates sqlite databases into repos
    where the sqlite is missing.
  - Internal refactoring and code cleanup


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.8.2-1
changelog:
  - doc: Add man pages for sqliterepo and update manpages for other tools
  - mergerepo: Work only with noarch packages if --koji is used and
    no archlist is specified
  - mergerepo: Use file:// protocol in local baseurl
  - mergerepo: Do not include baseurl for first repo if --koji is specified (RhBug: 1220082)
  - mergerepo_c: Support multilib arch for --koji repos
  - mergerepo_c: Refactoring
  - Print debug message with version in each tool when --verbose is used
  - modifyrepo: Don't override file with itself (RhBug: 1215229)


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.9.0-1
changelog:
  - mergerepo_c: Prepend protocol (file://) for URLs in pkgorigins (if --koji is used)
  - Update bash completion
  - doc: Update manpages
  - mergerepo: Fix NVR merging method
  - mergerepo: Fix behavior of --all param
  - createrepo: Add --cut-dirs and --location-prefix options
  - misc: Add cr_cut_dirs()
  - mergerepo: Use better version comparison algorithm
  - utils: Port cr_cmp_version_str() to rpm's algorithm (rpmvercmp)
  - misc: Rename elements in cr_Version structure
  - mergerepo: Fix version-release comparison for packages when --all is used
  - mergerepo: Show warnings if some groupfile cannot be automatically used
  - mergerepo: Exit with error code when a groupfile cannot be copied


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.9.1-1
changelog:
  - Fix double free during parsing broken XML metadata (Issue #33)
  - Tests: Add acceptance test for --general-compress-type option
  - Fix 'CR_CW_UNKNOWN_COMPRESSION cannot be used' error
  - Refactoring: Fix compiler warnings
  - Add --general-compress-type option (RhBug 1253850)
  - Enable drpm support when drpm library is detected on system (RhBug: 1261031) (Issue #37)
  - fix traceback on non-complete datetime information (Jarek Polok)
  - parsehdr: Skip broken dependency with bad (non-numerical) epoch and print warning about that
    (https://lists.fedoraproject.org/pipermail/devel/2015-August/213882.html)
  - misc: cr_str_to_evr(): Return NULL instead of "0" for bad (non-numerical) epoch
  - updateinfo: Fix a typo in the package release attribute (Luke Macken)
  - CMake: Don't require CXX compiler
  - Tests for different checksum type for RPMs and repodata files (#31)
  - Support different checksum type for RPMs and repodata files (#31)


author: Tomas Mlcoch <tmlcoch at redhat.com> - 0.10.0-1
changelog:
  - Python 3 support (made by Ralph Bean)
  - Modify gen_rst.py to indicate --sqliterepo is an option too (Neal Gompa)
  - Do not compress manpages at generation time (Neal Gompa)


author: Igor Gnatenko <ignatenko@redhat.com> - 0.10.0-4
changelog:
  - Don't own python3_sitearch dir in python3 subpkg
  - Use %license macro
  - Follow modern packaging guidelines
  - Cleanups in spec file
  - Follow packaging guidelines about SourceURL
  - Fix license


author: Daniel Mach <dmach@redhat.com> - 0.11.1-1
changelog:
  - [spec] Fix ldconfig for rhel <= 7
  - Fix "CR_DELTA_RPM_SUPPORT" redefined warnings
  - Set to build against Python 3 by default
  - Update README
  - Add mergerepo_c --repo-prefix-search and --repo-prefix-replace.
  - Fix missing packages in mergerepo_c in case multiple VR exists for single pkg in repo.


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.12.1-1
changelog:
  - Update to 0.12.1-1
  - Include file timestamp in repomd.xml to allow reproducing exact metadata as produced in the past
  - Enhance support of zchunk


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.12.2-1
changelog:
  - Update to 0.12.2
  - mergerepo_c: check if nevra is NULL and warn user about src.rpm naming
  - Consistently produce valid URLs by prepending protocol. (RhBug:1632121)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.13.2-1
changelog:
  - Update to 0.13.2
  - Add support for reading and merging module metadata
  - Add support for modular errata (RhBug:1656584)
  - Update --keep-all-metadata to keep all additional metadata, not just updateinfo and groupfile (RhBug:1639287)
  - mergerepo_c: Add support for --koji simple mode
  - Fix generating corrupted sqlite files (RhBug: 1696808)
  - modifyrepo_c: Prevent doubling of compression suffix (test.gz.gz)
  - Do not obsolete createrepo on Fedora < 31


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.14.1-1
changelog:
  - Update to 0.14.1
  - Add --pkgorigins mode for Koji
  - Correct pkg count in headers if there were invalid pkgs (RhBug:1596211)
  - Prevent exiting with 0 if errors occur while finalizing repodata.


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.14.2-1
changelog:
  - Update to 0.14.2
  - Obsolete createrepo on all Fedoras again (RhBug:1702771)
  - Fix issue with createrepo_c hanging at the end (RhBug:1714666)
  - Don't include packages with forbidden control chars in repodata


author: Ales Matej <amatej@redhat.com> - 0.15.1-1
changelog:
  - Update to 0.15.1
  - Allow pip to see installation of python3-createrepo_c
  - Imporove documentation
  - Switch off timestamping of documentation to avoid file conflics for createrepo_c-devel i686/x86_64 parallel installation
  - Remove dependency on deltarpm in favour of drpm


author: Pavel Raiskup <praiskup@redhat.com> - 0.15.5-1
changelog:
  - update to upstream 0.15.5 release, per
    https://github.com/rpm-software-management/createrepo_c/compare/0.15.4...0.15.5
  - new option --recycle-pkglist for --update mode
  - a bit more optimal --update caching


author: Ales Matej <amatej@redhat.com> - 0.15.11-1
changelog:
  - Update to 0.15.11
  - Switch updateinfo to explicitly include bool values (RhBug:1772466)
  - Enhance error handling when locating repositories (RhBug:1762697)
  - Make documentation for --update-md-path more specific
  - Clean up temporary .repodata on sigint
  - Add relogin_suggested to updatecollectionpackage (Rhbug:1779751)
  - Support issued date in epoch format in Python API (RhBug:1779751)
  - Allow parsing of xml repodata from string (RhBug: 1804308)
  - Remove expat xml library in favor of libxml2
  - Copy updateCollectionModule on assignment to prevent bogus data (RhBug:1821781)
  - Add --arch-expand option to mergerepo_c


author: Nicola Sella <nsella@redhat.com> - 0.16.1
changelog:
  - Update to 0.16.1
  - Add the section number to the manual pages
  - Parse xml snippet in smaller parts (RhBug:1859689)
  - Add module metadata support to createrepo_c (RhBug:1795936)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.17.2-1
changelog:
  - Update to 0.17.2
  - Fix Python deprecation (PY_SSIZE_T_CLEAN) (RhBug:1891785)
  - Revert back to old c API for destination file of cr_compress_file_with_stat and cr_compress_file to prevent a memory leak
  - Never leave behind .repodata lock on exit (RhBug:1906831)
  - Disable drpm for RHEL >= 9 (RhBug:1914828)
  - Setting updated/issued_date to None doesn't produce garbage values (RhBug:1921715)
  - Allow taking __repr__ (__str__) of closed xmlfile and sqlite (RhBug:1913465)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.17.7-1
changelog:
  - Update to 0.17.7
  - Remove insecure hashes SHA-1 and MD5 from the default build (RhBug:1935486)
  - Fix error when updating repo with removed modules metadata
  - Exit with status code 1 when loading of repo's metadata fails
  - Fix memory leaks (RhBug:1998426)
  - Fix valgrind warnings caused by subprocess calls


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.17.7-2
changelog:
  - Switch default of --keep-all-metadata to TRUE and add --discard-additional-metadata (RhBug:2055032)


author: Lukas Hrazky <lhrazky@redhat.com> - 0.20.1-1
changelog:
  - Update to 0.20.1
  - createrepo_c shouldn't silently produce duplicate-NEVRA repos
  - Fix bad performance with task queue management
  - Update errno usage to fix incorrect GError messages
  - Install header for createrepo_shared module
  - Remove C API for cr_xml_parse_main_metadata_together
  - Remove python bindings for xml_parse_main_metadata_together
  - Fix '&' encoding in attributes when parsing repodata
  - Add a streaming parsing API that is user-controllable.
  - Fix a memory leak of primary pkg when parsing interrupted
  - Fix a memory leak when removing the first link in a list
  - Remove `allow_out_of_order` option for `xml_parse_main_metadata_together`
  - Make parse warnings visible through cr.Repomd(), cr.UpdateInfo()
  - Use --error-exit-val option by default
  - If new and old repomd matches during --update don't update
  - Add `cr_repomd_compare` for comparing two repomds
  - Store parsed repomd in `cr_MetadataLocation`
  - Set database version only for the database records, not everything
  - Use copy+delete fallback when moving of a dir fails
  - Fix memory leaks
  - [spec] Option for legacy hashes, enable on RHEL <= 8 (RhBug:2022271)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.3-5
changelog:
  - Python 2 binary package renamed to python2-criu
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Adrian Reber <adrian@lisas.de> - 3.12-0.1
changelog:
  - Updated to 3.12 (pre-release)
  - Create libs subpackage
  - Build against SELinux (Fedora and RHEL8)
  - Build against libbsd (Fedora)


author: Jindrich Novy <jnovy@redhat.com> - 3.15-3
changelog:
  - add Requires: criu-libs = %{version}-%{release} in criu-devel
  - add gating tests
  - Related: #1934415


author: Jindrich Novy <jnovy@redhat.com> - 1.4.4-1
changelog:
  - update to https://github.com/containers/crun/releases/tag/1.4.4
  - Resolves: #2067577
  - Related: #2001445


author: Neil Horman <nhorman@redhat.com>
changelog:
  - Added upstream ocs fix
  - Added feature to find symbol assignments
  - Changed default SYSDIR directory to /var/lib/cs
  - Incoproated M. Schwendt's fix for ocs -s


author: Neil Horman <nhorman@redhat.com>
changelog:
  - Added cscope-indexer helper and xcscope lisp addon
  - Added man page for xcscope
  - Added triggers to add xcscope.el pkg to (x)emacs
  - Thanks to Ville, Michael and Jens for thier help :)


author: Vladis Dronov <vdronov@redhat.com> - 15.9-8
changelog:
  - Fix a double-free in changestring() (bz1886165)
  - Update Requires to include coreutils and ed
  - Adjust cscope-coverity-fixes.patch removing the fclose(script) chunk
  - Adjust BuildRequires and remove trailing spaces
  - Remove older source version from .gitignore
  - Rename cscope-invindex-sizing.patch as it is for the older upstream version


author: John Dennis <jdennis@redhat.com> - 5.8-11
changelog:
  - add ctags-5.8-memmove.patch
    bug #284 absoluteFilename uses strcpy on overlapping strings 
    http://sourceforge.net/p/ctags/bugs/284/  
    The bug was fixed upstream on 2012-03-26 in the following commit
    http://sourceforge.net/p/ctags/code/782/
    ctags-5.8-memmove.patch simply adds the same patch as the above commit.


author: Tim Powers <timp@redhat.com>
changelog:
  - started changelog 
  - fixed init.d script location
  - changed script in init.d quite a bit and made more like the rest of our
    startup scripts


author: Than Ngo <than@redhat.de>
changelog:
  - update to 1.1 release
  - move back to /etc/rc.d/init.d
  - fix cupsd.init to work with /etc/init.d and /etc/rc.d/init.d
  - split cups


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 1.1.1 (this has some major bugfixes)
  - Fix a typo in initscript (it's $?, not ?$)
  - Fix /usr/etc vs. /etc trouble, don't insist on /usr/var (YUCK!)
  - Create the spool dir


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.13-1
changelog:
  - 1.1.13
  - Add patch for koi8-{r,u} and iso8859-8 encodings (#59018)
  - Rename init scripts so we can safely "killall cupsd" from there


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.13-5
changelog:
  - Move cups-config to cups-devel subpackage
  - Make alternatives usage a %define to simplify builds for earlier
    releases
  - Explicitly provide things we're supplying through alternatives
    to shut up kdeutils dependencies


author: Bill Nottingham <notting@redhat.com> 1.1.14-7
changelog:
  - lpc man page is alternative too
  - run ldconfig in -libs %post/%postun, not main
  - remove alternatives in %preun


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.14-12
changelog:
  - Support SMB printing (#62407)
  - Add HTML redirections to doc files to work around users mistaking
    /usr/share/doc/cups-1.1.14 for the web frontend (#62405)


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.15-1
changelog:
  - 1.1.15-1
  - Fix up smb printing trigger (samba-client, not samba-clients)
  - Start cupsd earlier, apparently it needs to be running before samba
    starts up for smb printing to work.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.1.15-3
changelog:
  - Add a symlink /usr/share/cups/doc -> /usr/share/doc/cups-devel-1.1.15
    because some applications expect to find the cups docs in
    /usr/share/cups/doc


author: Tim Waugh <twaugh@redhat.com> 1.1.15-7
changelog:
  - Really add cups-lpd xinetd file (bug #63919).
  - Ship pstoraster (bug #69573).
  - Prevent fread from trying to read from beyond EOF (fixes a segfault
    with new glibc).


author: Tim Waugh <twaugh@redhat.com> 1.1.15-11
changelog:
  - Use %configure for multilib correctness.
  - Use libexec instead of lib for CUPS_SERVERBIN.
  - Ship translated man pages.
  - Remove unshipped files.
  - Fix file list permissions (bug #59021, bug #74738).
  - Fix messy initscript output (bug #65857).
  - Add 'reload' to initscript (bug #76114).


author: Tim Waugh <twaugh@redhat.com> 1.1.15-13
changelog:
  - Use logrotate for log rotation (bug #76791).
  - No longer need cups.desktop, since redhat-config-printer handles it.


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.15-14
changelog:
  - Buildrequire pam-devel.
  - Patch default PAM config file to remove directory names from module paths,
    allowing the configuration files to work equally well on multilib systems.
  - Patch default PAM config file to use system-auth, require the file at build-
    time because that's what data/Makefile checks for.


author: Tim Waugh <twaugh@redhat.com> 1.1.17-6
changelog:
  - Add epoch to internal requirements.
  - Make 'condrestart' return success exit code when daemon isn't running.


author: Tim Waugh <twaugh@redhat.com> 1.1.18-1
changelog:
  - 1.1.18.
  - No longer need uninit patch.
  - Some parts of the iDefense and pdftops patches seem to have been
    picked up, but not others.


author: Havoc Pennington <hp@redhat.com> 1:1.1.18-4
changelog:
  - adjust dbus patch - dbus_bus_get() sends the hello for you, 
    and there were a couple of memleaks
  - buildprereq dbus 0.9
  - rebuild for new dbus
  - hope it works, I'm ssh'd in with no way to test. ;-)


author: Tim Waugh <twaugh@redhat.com> 1:1.1.19-0.rc4.1
changelog:
  - 1.1.19rc4.  Ported initscript, idefense, ppdsdat, dbus patches.
  - No longer need error, sigchld patches.
  - Ship cupstestppd.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.19-7
changelog:
  - Add some %if %use_dbus / %endif's to make it compile without dbus
    (bug #97397).  Patch from Jos Vos.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.19-10
changelog:
  - Pass correct attributes-natural-language through even in the absence
    of translations for that language (bug #100984).
  - Show compilation command lines.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't ignore the file descriptor when ShutdownClient is called: it
    might get closed before we next try to read it (bug #107787).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-1
changelog:
  - 1.1.20.
  - No longer need idefense, str226 patches.
  - Updated sanity patch.
  - The devel sub-package requires openssl-devel (bug #110772).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-2
changelog:
  - Try harder to find a translated page for the web interface (bug #107619).
  - Added build_as_pie conditional to spec file to facilitate debugging.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-4
changelog:
  - Tracked D-BUS API changes.
  - Updated D-BUS configuration file.
  - Symlinks to avoid conflicting with bash builtins (bug #102490).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-7
changelog:
  - Fix non-conformance with HTTP/1.1, which caused failures when printing
    to a Xerox Phaser 8200 via IPP (bug #122352).
  - Make lppasswd(1) PIE.
  - Rotate logs within cupsd (instead of relying on logrotate) if we start
    to approach the filesystem file size limit (bug #123003).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix cups/util.c:get_num_sdests() to use encryption when it is necessary
    or requested (bug #118982).
  - Use upstream patch for the HTTP/1.1 Continue bug (from STR716).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-8
changelog:
  - If cupsd fails to start, make it exit with an appropriate code so that
    initlog notifies the user (bug #110135).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.20-9
changelog:
  - Apply patches from CVS (authtype) to fix STR #434, STR #611, and as a
    result STR #719.  This fixes several problems including those noted in
    bug #114999.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.21-1.rc2.1
changelog:
  - 1.1.21rc2.
  - No longer need state, reload-timeout or str743 patches.
  - httpnBase64 patch no longer applies; alternate method implemented
    upstream.
  - Fix single byte overread in usersys.c (spotted by Colin Walters).


author: Tim Waugh <twaugh@redhat.com> 1:1.1.22-0.rc1.7
changelog:
  - Prevent filters generating incorrect PS in locales where "," is the
    decimal separator (bug #136102).  Patch from STR #970.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.22-0.rc2.1
changelog:
  - Make cancel-cups(1) man page point to lp-cups(1) not lp(1) (bug #136973).
  - Use upstream patch for STR #953.
  - 1.1.22rc2.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.22-2
changelog:
  - Fixed cups-lpd file mode (bug #137325).
  - Convert all man pages to UTF-8 (bug #107118).  Patch from Miloslav Trmac.


author: Tim Waugh <twaugh@redhat.com> 1:1.1.23-18
changelog:
  - Raise IPP_MAX_VALUES to 100 (bug #164232).  STR #1284.
  - Made FindDest better behaved in some instances (bug #164232).  STR #1283.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - 1.2 svn snapshot.
  - No longer need doclink, str1023, pdftops, sanity, lpstat, str1068,
    sigchld, gcc34, gcc4, slow, CAN-2004-0888, CAN-2005-2097, finddest,
    str1249, str1284, str1290, str1301, CVE-2005-3625,6,7 patches.
  - Removed autodetect-tag patch.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.0.svn4964.0
changelog:
  - Use -fPIE not -fpie in PIE patch.
  - Fix link patch.
  - Patch in PIE instead of using --enable-pie, since that doesn't work.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.0.svn5102.0
changelog:
  - New svn snapshot.
  - No longer need enabledisable patch.
  - Fixed double-free in scheduler/policy.c (STR #1428).


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.1.b2.6
changelog:
  - Add KDE compatibility symbols _ipp_add_attr/_ipp_free_attr to ipp.h, with
    a comment saying why they shouldn't be used.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.2.rc1.1
changelog:
  - Ship a printers.conf file, and a client.conf file.  That way, they get
    their SELinux file contexts set correctly.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.2.rc1.8
changelog:
  - No longer need openssl-devel.
  - Build with LDAP_DEPRECATED=1, to pick up declarations of ldap_init() etc.
  - Only warn about ACLs once (STR #1532).
  - Fix imagetops filter (STR #1533).
  - Sync pstops.c with svn 5382.


author: Tim Waugh <twaugh@redhat.com> 1:1.2-0.5.rc3.2
changelog:
  - Patch pdftops to understand 'includeifexists', and use that in the
    pdftops.conf file (bug #189809).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - No longer need backend, rcp, or ppdsdat patches.
  - Use configure switch for LogFilePerm default instead of patch.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Sync to svn5470.
  - No longer need link, CAN-2005-0064, or no-propagate-ipp-port patches.
  - Switch to upstream PIE implementation (every single binary is PIE).
  - Extend relro to all binaries.
  - Better rpath patch.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Sync to svn5538.
  - Added 'restartlog' to initscript, for clearing out error_log.  Useful
    for problem diagnosis.
  - Initscript no longer needs to check for printconf-backend.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.0-4
changelog:
  - Disable back-channel data in the usb backend (STR #1705, bug #192034).
  - Fix for 'browsing stops on reload', STR #1670 (bug #191217).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.0-7
changelog:
  - Sync to svn5568.  No longer need rpath patch.
  - Added a 'conflicts:' for kdelibs to prevent bug #192548.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.1-2
changelog:
  - 1.2.1.
  - Another STR #1705 fix (bug #192034).
  - Fixed devel package multilib conflict (bug #192664).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.2-6
changelog:
  - Use replacement snmp.c from STR #1737 (bug #193093).
  - Re-enable LSPP; doesn't harm browsing after all.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.2-10
changelog:
  - Remove 'Provides: LPRng = 3.8.15-3' (bug #148757).
  - Applied patch to fix STR #1893 (bug #201800).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-8
changelog:
  - LSPP patch didn't get updated properly in 1:1.2.4-6.  Use the right
    patch this time (bug #208676).  LSPP re-enabled.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.4-9
changelog:
  - adminutil.c: when writing 'BrowseAllow @LOCAL', add a comment about what
    to change it to when using directed broadcasts from another subnet
    (bug #204373).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.5-4
changelog:
  - Fixed support for /dev/ttyUSB devices (bug #212577, STR #2061).
  - Fixed parallel backend (bug #213021, STR #2056).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.7-4
changelog:
  - Another LSPP fix (bug #216669).
  - Fixed LSPP SELinux check (bug #216855).
  - Increased PPD timeout in copy_model() (bug #216065).


author: Tim Waugh <twaugh@redhat.com> 1:1.2.7-6
changelog:
  - Fixed If-Modified-Since: handling in libcups (bug #217556, STR #2133).
  - Fixed extra EOF in pstops output (bug #216154, STR #2111).
  - Use upstream patch for STR #2121.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.7-8
changelog:
  - Removed logrotate config file and maxlogsize patch (bug #227369).  Now
    CUPS is in charge of rotating its own logs, and defaults to doing so once
    they get to 1Mb in size.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.10-6
changelog:
  - Fixed 'cancel' man page (bug #234088).
  - Added empty subscriptions.conf file to make sure it gets the right
    SELinux file context.


author: Tim Waugh <twaugh@redhat.com> 1:1.2.10-7
changelog:
  - Until bug #236736 is fixed, work around the kernel usblp driver's
    quirks so that we can detect paper-out conditions.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Make the initscript use start priority 56 (bug #213828).
  - Better paper-out detection patch (bug #241589).


author: Tim Waugh <twaugh@redhat.com> 1:1.3-0.b1.2
changelog:
  - Build requires avahi-compat-libdns_sd-devel.  Applied patch to fix
    build against avahi (bug #245824).
  - Build requires krb5-devel.


author: Tim Waugh <twaugh@redhat.com> 1:1.3-0.b1.3
changelog:
  - Change initscript start level to 98, to start after avahi but before
    haldaemon.
  - The devel sub-package requires krb5-devel.


author: Tim Waugh <twaugh@redhat.com> 1:1.3-0.rc2.1
changelog:
  - Better buildroot tag.
  - Moved LSPP access check in add_job() to before allocation of the job
    structure (bug #231522).
  - 1.3rc2.  No longer need avahi patch.


author: Tim Waugh <twaugh@redhat.com> 1:1.3-0.rc2.2
changelog:
  - Make cancel man page work properly with alternatives system (bug #249768).
  - Don't call aclocal even when we modify m4 files -- CUPS does not use
    automake (bug #250251).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.3-3
changelog:
  - Use ppdev instead of libieee1284 for parallel port Device ID
    retrieval (bug #311671).  This avoids SELinux audit messages.


author: Tim Waugh <twaugh@redhat.com> 1:1.3.4-2
changelog:
  - Applied patch to fix CVE-2007-4045 (bug #250161).
  - Applied patch to fix CVE-2007-4352, CVE-2007-5392 and
    CVE-2007-5393 (bug #345101).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fixed CVE-2007-4045 patch; has no effect with shipped packages since they
    are linked with gnutls.
  - LSPP cupsdSetString/ClearString fixes (bug #378451).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - CVE-2007-4045 patch is not necessarily because cupsd_client_t objects are
    not moved in array operations, only pointers to them.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Apply patch to prevent overlong PPD lines from causing failures except
    in strict mode (bug #405061).  Needed for compatibility with older
    versions of foomatic (e.g. Red Hat Enterprise Linux 3/4).
  - Applied upstream patch to fix cupsctl --remote-any (bug #421411, STR #2650).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.5-4
changelog:
  - Fix compilation of SO_PEERCRED support.
  - Include fixes from svn up to revision 7287.  No longer need str2650 or
    str2664 patches.


author: Tim Waugh <twaugh@redhat.com> 1:1.3.5-6
changelog:
  - Include fixes from svn up to revision 7304.  No longer need str2703 patch.
    Build with --with-dbusdir.
  - Try out logrotate again (bug #432730).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.6-3
changelog:
  - Set MaxLogSize to 0 to prevent log rotation.  Upstream default is 1Mb, but
    we want logrotate to be in charge.


author: Tim Waugh <twaugh@redhat.com> 1:1.3.6-4
changelog:
  - LSB header for initscript (bug #246897).
  - Move HTML-related files to main application directory so that the CUPS
    web interface still works even with --excludedocs (bug #375631).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.6-9
changelog:
  - Applied patch to fix CVE-2008-1373 (GIF overflow, bug #438303).
  - Applied patch to prevent heap-based buffer overflow in CUPS helper
    program (bug #436153, CVE-2008-0047, STR #2729).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-3
changelog:
  - If cupsdTimeoutJob is called when the originating connection is still
    known, pass that to the function so that copy_banner can get at it if
    necessary (bug #447200).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.7-13
changelog:
  - CVE-2008-1373 patch is no longer needed (applied upstream).
  - Mark HTML files and templates config(noreplace) for site-local
    modifications (bug #441719).
  - The cups-devel package requires zlib-devel (bug #455192).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Removed autoconf requirement by applying autoconf-generated changes
    to patches that caused them.  Affected patches: cups-lspp.


author: Tim Waugh <twaugh@redhat.com> 1:1.3.8-5
changelog:
  - The dnssd backend uses avahi-browse so require it (bug #458565).
  - New php sub-package (bug #428235).
  - cups-polld: reinit the resolver if we haven't yet resolved the
    hostname (bug #354071).


author: Tim Waugh <twaugh@redhat.com> 1:1.3.9-1
changelog:
  - 1.3.9, including fixes for CVE-2008-3639 (STR #2918, bug #464710),
    CVE-2008-3640 (STR #2919, bug #464713) and CVE-2008-3641 (STR #2911,
    bug #464716).
  - No longer need str2892 or res_init patches.


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b1.3
changelog:
  - 1.4b1.
  - No longer need ext, includeifexists, foomatic-recommended,
    getnameddest, str2101, str2536 patches.
  - Require poppler-utils at runtime and for build.  No longer need
    pdftops.conf.
  - Obsolete cupsddk.


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b1.5
changelog:
  - Applied patch to fix RSS subscription limiting (bug #473901,
    CVE-2008-5183).
  - Attempt to unbreak the fix for STR #2831 (bug #474742).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b2.6
changelog:
  - Beginnings of avahi support.  The dnssd backend should now work, but
    the scheduler will not yet advertise DNS-SD services.
  - No longer require avahi-tools as the dnssd backend does not use the
    command line tools any longer.
  - Load MIME type rules correctly (bug #426089, STR #3059).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b2.7
changelog:
  - Prevent cups-deviced missing devices (STR #3108).
  - Actually drop the perl implementation of the dnssd backend and use
    the avahi-aware one.


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b2.12
changelog:
  - If cups-polld gets EAI_AGAIN when looking up a hostname,
    re-initialise the resolver (bug #490943).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b2.13
changelog:
  - Don't verify MD5 sum, file size, or mtime for several config files:
    cupsd.conf, client.conf, classes.conf, printers.conf, snmp.conf,
    subscriptions.conf, lpoptions (bug #486287).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b2.14
changelog:
  - Applied patch to fix CVE-2009-0163 (bug #490596).
  - Applied patch to fix CVE-2009-0164 (bug #490597).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.b2.15
changelog:
  - Accept "Host: ::1" (bug #497393).
  - Accept Host: fields set to the ServerName value (bug #497301).
  - Specify that we want poppler's pdftops (not ghostscript) for the
    pdftops wrapper when calling configure.


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.1
changelog:
  - 1.4rc1.  No longer need str3124, CVE-2009-0163, CVE-2009-0164,
    str3197, missing-devices patches.
  - Disabled avahi patch for the time being.  More work is needed to
    port this to rc1.
  - Removed wbuffer patch as it is not needed (see STR #1968).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.3
changelog:
  - Don't use RPM_SOURCE_DIR macro.
  - Fixed add/modify-printer templates which had extra double-quote
    characters, preventing the Continue button from appearing in certain
    browsers (bug #506461, STR #3229).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.7
changelog:
  - Fixed template problem preventing current printer option defaults
    from being shown in the web interface (bug #506794, STR #3244).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.10
changelog:
  - Applied patch to prevent bad job control files crashing cupsd on
    start-up (STR #3253, bug #509741).
  - Correctly handle CUPS-Get-PPDs requests for models with '+' in their
    names (STR #3254, bug #509586).
  - Accept incorrect device URIs in the (non-libusb) usb backend for
    compatibility with Fedora 11 before bug #507244 was fixed.
  - Applied patch to fix incorrect device URIs (STR #3259, bug #507244).
  - Applied patch to fix job-hold-until for remote queues (STR #3258,
    bug #497376).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.12
changelog:
  - Fixed Avahi support in the dnssd backend (bug #513888).
  - Fixed incorrect arguments to sigaction() in dnssd backend (STR #3272).
  - Cheaply restore compatibility with 1.1.x by having cups_get_sdests()
    perform a CUPS_GET_CLASSES request if it is not sure it is talking
    to CUPS 1.2 or later (bug #512866).
  - Prevent ipp backend looping with bad IPP devices (bug #476424,
    STR #3262).
  - Fixed Device ID reporting in the usb backend (STR #3266).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.13
changelog:
  - Ship udev rules to allow libusb to access printer devices.
  - Fixed duplex test pages (bug #514898, STR #3277).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.14
changelog:
  - Fixed ppds.dat handling of drv files (bug #515027, STR #3279).
  - Fixed udev rules file to avoid DEVTYPE warning messages.
  - Fixed cupsGetNamedDest() so it does not fall back to the default
    printer when a destination has been named (bug #516439, STR #3285).
  - Fixed MIME type rules for image/jpeg and image/x-bitmap
    (bug #516438, STR #3284).
  - Clear out cache files on upgrade.
  - Require acl.


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.16
changelog:
  - Fixed JobKillDelay handling for cancelled jobs (bug #518026, STR
    - Use 'exec' to invoke ghostscript in the pstoraster filter.  This
    allows the SIGTERM signal to reach the correct process, as well as
    conserving memory (part of bug #518026).


author: Tim Waugh <twaugh@redhat.com> 1:1.4-0.rc1.19
changelog:
  - Prevent infinite loop in cupsDoIORequest when processing HTTP
    errors (bug #518065, bug #519663, STR #3311).
  - Fixed document-format-supported attribute when
    application/octet-stream is enabled (bug #516507, STR #3308, patch
    from Jiri Popelka).
  - Fixed buggy JobKillDelay handling fix (STR #3292).
  - Prevent infinite loop in ppdc (STR #3293).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.0-2
changelog:
  - Fixed the dnssd backend so that it only reports devices once avahi
    resolution has completed.  This makes it report Device IDs
    (bug #520858).
  - Fix locale code for Norwegian (bug #520379).


author: Jiri Popelka <jpopelka@redhat.com> 1:1.4.1-4
changelog:
  - Changed cups.init to be LSB compliant (bug #521641), i.e.
    return code "2" (instead of "3") if invalid arguments
    return code "4" if restarting service under nonprivileged user
    return code "5" if cupsd not exist or is not executable
    return code "6" if cupsd.conf not exist


author: Jiri Popelka <jpopelka@redhat.com> 1:1.4.1-13
changelog:
  - Fix incorrectly applied patch from #STR3285 (bug #531108).
  - Set the PRINTER_IS_SHARED variable for admin.cgi (bug #529634, #STR3390).
  - Pass through serial parameters correctly in web interface (bug #529635, #STR3391).
  - Fixed German translation (bug #531144, #STR3396).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.2-1
changelog:
  - 1.4.2.  No longer need str3380, str3332, str3356, str3396 patches.
  - Removed postscript.ppd.gz (bug #533371).
  - Renumbered patches and sources.


author: Tim Waugh <twaugh@redhat.com> 1:1.4.2-5
changelog:
  - Fixed typo in admin web template (bug #537884, STR #3403).
  - Reset SIGPIPE handler for child processes (bug #537886, STR #3399).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.2-6
changelog:
  - Fixed display of current driver (bug #537182, STR #3418).
  - Fixed out-of-memory handling when loading jobs (bug #538054,
    STR #3407).


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-14
changelog:
  - The scheduler did not use the Get-Job-Attributes policy for a
    printer (STR #3431).
  - The scheduler added two job-name attributes to each job object
    (STR #3428).
  - The scheduler did not clean out completed jobs when
    PreserveJobHistory was turned off (STR #3425).
  - The web interface did not show completed jobs (STR #3436).
  - Authenticated printing did not always work when printing directly to
    a remote server (STR #3435).
  - Use upstream patch to stop the network backends incorrectly clearing
    the media-empty-warning state (rev 8896).
  - Use upstream patch to fix interrupt handling in the side-channel
    APIs (rev 8896).
  - Use upstream patch to handle negative SNMP string lengths (rev 8896).
  - Use upstream fix for SNMP detection (bug #542857, STR #3413).
  - Use the text filter for text/css files (bug #545026, STR #3442).
  - Show conflicting option values in web UI (bug #544326, STR #3440).
  - Use upstream fix for adjustment of conflicting options
    (bug #533426, STR #3439).
  - No longer requires paps.  The texttopaps filter MIME conversion file
    is now provided by the paps package (bug #545036).
  - Moved %{_datadir}/cups/ppdc/*.h to the main package (bug #545348).


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-20
changelog:
  - Fixed ipp authentication for servers requiring authentication for
    IPP-Get-Printer-Attributes (bug #548873, STR #3458).


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-21
changelog:
  - Fixed patch for STR #3425 again by adding in back-ported change from
    svn revision 8929 (bug #549899).  No longer need
    delete-active-printer patch.


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-22
changelog:
  - Removed use of prereq and buildprereq.
  - Fixed use of '%' in changelog.
  - Versioned explicit obsoletes/provides.
  - Use tabs throughout.


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-23
changelog:
  - Use %{_initddir}, %{_sysconfdir} and SMP make flags.
  - Use mode 0755 for binaries and libraries where appropriate.
  - Fix lpd obsoletes tag.


author: Jiri Popelka <jpopelka@redhat.com> 1:1.4.2-32
changelog:
  - Fixed cupsGetNamedDest() so it falls back to the real default
    printer when a default from configuration file does not exist (bug #565569, STR #3503).


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-33
changelog:
  - Don't own filesystem locale directories (bug #569403).
  - Don't apply gcrypt threading patch (bug #553834).
  - Don't treat SIGPIPE as an error (bug #569770).


author: Tim Waugh <twaugh@redhat.com> - 1:1.4.2-34
changelog:
  - Applied patch for CVE-2010-0302 (incomplete fix for CVE-2009-3553,
    bug #557775).
  - Added comments for all sources and patches.


author: Jiri Popelka <jpopelka@redhat.com> 1:1.4.2-35
changelog:
  - Fixed (for the third time) patch for STR #3425 to correctly
    remove job info files in /var/spool/cups (bug #571830).


author: Jiri Popelka <jpopelka@redhat.com> 1:1.4.3-1
changelog:
  - 1.4.3.
  - No longer need CVE-2009-3553, str3381, str3390, str3391,
    str3403, str3407, str3413, str3418, str3422, str3425,
    str3428, str3431, str3435, str3436, str3439, str3440,
    str3442, str3448, str3458, str3460, cups-sidechannel-intrs,
    negative-snmp-string-length, cups-media-empty-warning patches.


author: Tim Waugh <twaugh@redhat.com> 1:1.4.3-9
changelog:
  - Adjust texttops output to be in natural orientation (STR #3563).
    This fixes page-label orientation when texttops is used in the
    filter chain (bug #572338).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Removed unapplied gnutls-gcrypt-threads patch.  Fixed typos in
    descriptions for lpd and php sub-packages.


author: Tim Waugh <twaugh@redhat.com> 1:1.4.4-1
changelog:
  - 1.4.4.  Fixes several security vulnerabilities (bug #605399):
    CVE-2010-0540, CVE-2010-0542, CVE-2010-1748.  No longer need str3503,
    str3399, str3505, str3541, str3425p2 or CVE-2010-0302 patches.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Merged F-12 change:
    - Use numeric addresses for interfaces unless HostNameLookups are
      turned on (bug #583054).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.4-10
changelog:
  - Perform locking for gnutls and avoid libgcrypt's broken
    locking (bug #607159).
  - Build with --enable-threads again (bug #607159).
  - Force the use of gnutls despite thread-safety concerns (bug #607159).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.4-12
changelog:
  - Applied patch to fix cupsd memory corruption vulnerability
    (CVE-2010-2941, bug #652161).
  - Don't crash when MIME database could not be loaded (bug #610088).


author: Jiri Popelka <jpopelka@redhat.com> 1:1.4.5-4
changelog:
  - Changed subsystem lock file name in initscript
    so the service is correctly stopped on reboot or halt (bug #659391).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.5-5
changelog:
  - Fixed character encoding in CREDITS.txt.
  - Mark D-Bus configuration file as config file.
  - Don't mark MIME types and convs files as config files.  Overrides
    can be placed as new *.types/*.convs files in /etc/cups.
  - Don't mark banners as config files.  Better is to provide new
    banners.
  - Don't mark templates and www files as config files.  A better way to
    provide local overrides is to use a different ServerRoot setting.
    Note that a recent security fix required changed to template files.
  - Provide versioned LPRng symbol for rpmlint.


author: Tim Waugh <twaugh@redhat.com> 1:1.4.5-6
changelog:
  - The cups-config man page has been moved to the devel sub-package.
  - The php sub-package now explicitly requires the libs package with
    the same version and release (bug #646814).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.6-2
changelog:
  - Use a smaller buffer when writing to USB devices (bug #661814).
  - Handle EAI_NONAME when resolving hostnames (bug #617208).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.6-4
changelog:
  - Properly separated serverbin-compat and lspp patches.
  - Updated ICC patch (still not yet applied).


author: Tim Waugh <twaugh@redhat.com> 1:1.4.6-6
changelog:
  - Don't use --enable-pie configure option as it has been removed and
    is now assumed.  See STR #3691.


author: Jiri Popelka <jpopelka@redhat.com> 1:1.5-0.1.b1
changelog:
  - 1.5b1
    - removed cups-texttops-rotate-page.patch (#572338 is CANTFIX)
    - removed cups-page-label.patch (#520141 seems to be CANTFIX)


author: Tim Waugh <twaugh@redhat.com> 1:1.5-0.10.rc1
changelog:
  - Don't use portreserve any more.  Better approach is to use systemd
    socket activation (not yet done).


author: Tim Waugh <twaugh@redhat.com> 1:1.5-0.14.rc1
changelog:
  - Undo last change which had no effect.  We already remove the .SILENT
    target from the Makefile as part of the build.


author: Tim Waugh <twaugh@redhat.com> 1:1.5.0-6
changelog:
  - Tighten explicit libs sub-package requirement so that it includes
    the correct architecture as well (bug #731421 comment #8).


author: Richard Hughes <rhughes@redhat.com> 1:1.5.0-11
changelog:
  - Updated colord patch with fixes to DeleteDevice.
  - Resolves https://bugzilla.redhat.com/show_bug.cgi?id=741697


author: Tim Waugh <twaugh@redhat.com> 1:1.5.0-12
changelog:
  - More fixes for systemd socket activation:
    - relax permissions check for domain socket in libcups.
    - initialise addrlen before calling getsockname().


author: Tim Waugh <twaugh@redhat.com> 1:1.5.0-16
changelog:
  - Use upstream fix for driverd issue (bug #742989).
  - Array handling fixes for DNSSDPrinters.
  - Array handling fixes for Avahi poll implementation.
  - Increase client blocking timeout from 30s to 70s (bug #744715).
  - Set BindIPv6Only=ipv6-only in systemd socket unit file as better fix
    for bug #737230.


author: Tim Waugh <twaugh@redhat.com> 1:1.5.0-18
changelog:
  - Make sure to guard against retrying the Avahi connection whilst
    already doing so (Ubuntu #877967).


author: Tim Waugh <twaugh@redhat.com> 1:1.5.0-23
changelog:
  - Detangle cups-serverbin-compat.patch from cups-lspp.patch.
  - Bind to datagram socket as well in systemd cups.socket unit file, to
    prevent that port being stolen by another service (bug #760070).


author: Tim Waugh <twaugh@redhat.com> 1:1.5.0-26
changelog:
  - Replace newline characters with spaces in reported Device IDs
    (bug #782129, STR #4005).
  - Don't accept Device URIs of '\0' from SNMP devices
    (bug #770646, STR #4004).


author: Remi Collet <remi@fedoraproject.org> 1:1.5.0-28
changelog:
  - build against php 5.4.0, patch for STR #3999
  - add filter to fix private-shared-object-provides
  - add %check for php extension


author: Tim Waugh <twaugh@redhat.com> 1:1.5.2-2
changelog:
  - Synthesize notify-printer-uri for job-completed events where the job
    never started processing (bug #784786, STR #4014).
  - Removed banners from LSPP patch on Dan Walsh's advice.


author: Tim Waugh <twaugh@redhat.com> 1:1.5.2-8
changelog:
  - Avoid systemd PrivateTmp bug by explicitly requiring the fixed
    version of systemd (bug #807672).


author: Tim Waugh <twaugh@redhat.com> 1:1.5.2-10
changelog:
  - Removed private-shared-object-provides filter lines as they are not
    necessary (see bug #807767 comment #3).


author: Jiri Popelka <jpopelka@redhat.com> 1:1.5.2-11
changelog:
  - The IPP backend did not always setup username/password authentication
    for printers (bug #810007, STR #3985)
  - Detect authentication errors for all requests.
    (bug #810007, upstream commit revision10277)


author: Jiri Popelka <jpopelka@redhat.com> 1:1.5.2-12
changelog:
  - Install /usr/lib/tmpfiles.d/cups-lp.conf to support /dev/lp* devices (#812641)
  - Move /etc/tmpfiles.d/cups.conf to /usr/lib/tmpfiles.d/ (#812641)


author: Jiri Popelka <jpopelka@redhat.com> 1:1.5.2-13
changelog:
  - Add triggers for samba4-client. (#817110)
  - No need to define BuildRoot and clean it in clean and install section anymore.
  - %defattr no longer needed in %files sections.


author: Jiri Popelka <jpopelka@redhat.com> 1:1.6.1-1
changelog:
  - 1.6.1
   - simplified systemd.patch due to removed CUPS Browsing protocol (STR #3922)
   - removed:
     textonly filter - moved to cups-filters
     pstopdf filter - cups-filters also has pstopdf (different)
     PHP module - moved to cups-filters (STR #3932)
     serial.patch - moved to cups-filters
     getpass.patch - r10140 removed the getpass() use
     snmp-quirks.patch - fixed upstream (r10493)
     avahi patches - merged upstream (STR #3066)
     icc.patch - merged upstream (STR #3808)
   - TODO:
     - do we need cups-build.patch ?
  - added filesystem sub-package (#624695)
  - use macroized systemd scriptlets


author: Tim Waugh <twaugh@redhat.com> 1:1.6.1-11
changelog:
  - Apply upstream fix for CVE-2012-5519 (STR #4223, bug #875898).
    Migrate configuration keywords as needed.


author: Tim Waugh <twaugh@redhat.com> 1:1.6.1-13
changelog:
  - Applied additional upstream patch for CVE-2012-5519 so that the
    RemoteRoot keyword is recognised in the correct configuration file.


author: Tim Waugh <twaugh@redhat.com> 1:1.6.1-16
changelog:
  - Additional fix relating to CVE-2012-5519 to avoid misleading error
    message about actions to take to enable file device URIs.


author: Jiri Popelka <jpopelka@redhat.com> 1:1.6.1-17
changelog:
  - Migrate cups-lpd from xinetd to systemd socket activatable service (#884641).
  - Clean up old Requires/Conflicts/Obsoletes/Provides.


author: Jiri Popelka <jpopelka@redhat.com> - 1:1.6.1-23
changelog:
  - Removed obsolete browsing directives from cupsd.conf (bug #880826, STR #4157).
  - Updated summary and descriptions (#882982).
  - Fixed bogus dates in changelog.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - cups-dbus-utf.patch: now that the scheduler only accepts valid UTF-8
    strings for job-name, there's no need to validate it as UTF-8 in the
    dbus notifier.


author: Tim Waugh <twaugh@redhat.com> - 1:1.7-0.19.rc1
changelog:
  - Fixed avahi-no-threaded patch (was missing part of cupsd.h). Thanks
    to Joseph Wang for spotting it.


author: Tim Waugh <twaugh@redhat.com> - 1:1.7-0.26.rc1
changelog:
  - Reverted upstream change to FINAL_CONTENT_TYPE in order to fix
    printing to remote CUPS servers (bug #1010580).


author: Tim Waugh <twaugh@redhat.com> - 1:1.7.0-9
changelog:
  - dbus notifier: call _exit when handling SIGTERM (STR #4314).
  - Use '-f' when using rm in %setup section.
  - Fixed avahi-no-threaded patch so it removes a call to
    avahi_threaded_poll_stop() (bug #1044602).


author: Tim Waugh <twaugh@redhat.com> - 1:1.7.0-10
changelog:
  - Removed cups-dbus-utf8.patch as no longer needed (see STR #4314).
  - Return jobs in rank order when handling IPP-Get-Jobs (STR #4326).


author: Tim Waugh <twaugh@redhat.com> - 1:1.7.1-6
changelog:
  - Track local default in cupsEnumDests() (STR #4332).
  - libcups: avoid race condition when sending IPP requests (STR #4386).
  - Prevent feedback loop when fetching error_log over HTTP (STR #4366).


author: Jiri Popelka <jpopelka@redhat.com> - 1:1.7.1-9
changelog:
  - New client subpackage containing command line client tools (bug #1002342).
  - Removed unneeded Group tags.
  - Removed 'Requires: /sbin/chkconfig'.
  - Moved 'Provides: lpd' to lpd subpackage.


author: Tim Waugh <twaugh@redhat.com> - 1:1.7.5-4
changelog:
  - Removed old one-off trigger now it's no longer needed.
  - Run systemd postun script for path and socket unit files as well as
    the main service unit file.
  - Upstream patch for STR #4396, pre-requisite for STR #2913 patch.
  - Upstream patch for STR #2913 to limit Get-Jobs replies to 500 jobs
    (bug #421671).


author: Tim Waugh <twaugh@redhat.com> - 1:2.0.0-4
changelog:
  - Can no longer reproduce bug #1010580 so removing final-content-type
    patch as it causes issues for some backends (bug #1149244).


author: Tim Waugh <twaugh@redhat.com> - 1:2.0.0-10
changelog:
  - cups-lspp.patch: use cupsdLogJob() when appropriate.
  - Fixed some warnings in cups-lspp.patch.
  - New systemd journal fields CUPS_DEST and CUPS_PRINTER, as well as
    accurate code location fields.


author: Tim Waugh <twaugh@redhat.com> - 1:2.0.0-11
changelog:
  - Removed openssl requirements from spec file as it is no longer
    supported upstream (see bug #1161235).


author: Tim Waugh <twaugh@redhat.com> - 1:2.0.0-12
changelog:
  - Re-introduce SSLOptions configuration directive, disable SSL3 by
    default (STR #4476).
  - Enable SSL again via GnuTLS (bug #1161235).


author: Tim Waugh <twaugh@redhat.com> - 1:2.0.3-3
changelog:
  - Fix slow resume of jobs after restart (STR #4646).
  - Fix redirection from CGI scripts (bug #1232030, STR #4538).


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.1-3
changelog:
  - Unable to print from Windows (7) on a Cups-Server(2.2.1-1) with german umlauts in the filename (bug #1386751)


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.3-4
changelog:
  - fixing issue with #1437065 - makes res_init() call to local resolver and keeps error message, but no hard exit for cupsd


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-21
changelog:
  - 1602469 - fixed covscan issues
  - 1625899 - cups 2.2.6 lpr command fails against old cups 1.3.9 server
  - 1625913 - ssl options aren't initialized when no SSLOptions directive is set in /etc/cups/client.conf
  - 1618009 - Enabling cups.path causes high load when jobs are submitted to CUPS
  - 1630805 - Make cups systemd unit files more upstream-like


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-22
changelog:
  - 1622431 - Jobs with multiple files don't complete when backend fails
  - CVE-2018-4700 cups: Predictable session cookie breaks CSRF protection [rhel-8]


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-30
changelog:
  - 1774462 - CVE-2019-8675 - buffer overflow in SNMP and IPP, memory disclosure and DoS in scheduler
  - 1774463 - CVE-2019-8696


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-35
changelog:
  - 1825254 - CVE-2020-3898 cups: heap based buffer overflow in libcups's ppdFindOption() in ppd-mark.c


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-36
changelog:
  - 1838449 - ipp/socket backends connect to turned off device for eternity (contimeout is not applied)
  - 1689207 - Add failover backend
  - 1833516 - DirtyCleanInterval ignored if there are open client connections


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-39
changelog:
  - 1941437 - cupsd doesn't log job ids when logging into journal
  - 1782216 - Print queue is paused after ipp backend ends with CUPS_BACKEND_STOP
  - 1938384 - CUPS doesn't start if sssd starts after cupsd


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-40
changelog:
  - 1955964 - PreserveJobHistory doesn't work with seconds
  - 1927452 - CVE-2020-10001 cups: access to uninitialized buffer in ipp.c [rhel-8]


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-41
changelog:
  - 2006987 - Unauthenticated users can't move print jobs in Web UI
  - 2017919 - Setting 'MaxJobTime 0' does not set a job time to unlimited
  - 1726383 - "lpadmin -p <queue> -o cupsSNMPSupplies:false" doesn't work
  - 1982891 - Printing of banner before PCL file only prints banner
  - 2006591 - Trying to restart and hold a job doesn't work
  - 1811716 - lpr to non-existent printer reports incorrect error


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-46
changelog:
  - 2074684 - lp to a remote server takes a long time
  - 2074736 - CUPS is too chatty about "Removing document files." in debug mode


author: Tim Waugh <twaugh@redhat.com> - 1.0.35-6
changelog:
  - Set cost for text filters to 200 so that the paps filter gets
    preference for the time being (bug #988909).


author: Tim Waugh <twaugh@redhat.com> - 1.0.36-3
changelog:
  - Upstream patch to re-work filter costs (bug #998977). No longer need
    text filter costs patch as paps gets used by default now if
    installed.


author: Tim Waugh <twaugh@redhat.com> - 1.0.41-4
changelog:
  - Adjust filter costs so application/vnd.adobe-read-postscript input
    doesn't go via pstotiff (bug #1008166).


author: Tim Waugh <twaugh@redhat.com> - 1.0.54-2
changelog:
  - Fix build issue (bug #1106101).
  - Don't use grep's -P switch in pstopdf as it needs execmem (bug #1079534).
  - Return work-around patch for bug #768811.


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.14.0-3
changelog:
  - update python Requires/BuildRequires accordingly to Fedora Guidelines for Python (python-cups -> python3-cups)


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.20.0-3
changelog:
  - remove old stuff https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/MRWOMRZ6KPCV25EFHJ2O67BCCP3L4Y6N/


author: Zdenek Dohnal <zdohnal@redhat.com> - 1.20.0-13
changelog:
  - 1602470 - covscan fixes from upstream
  - 1632268 - cups-filters needs to obsolete ghostscript-cups and foomatic-filters
  - 1626996 - cups-filters: Sticky EOF behavior in glibc breaks descriptor concatenation using dup2


author: Weitao Zhou <zhouwt@linux.alibaba.com> 1.20.0-29.0.1.2
changelog:
  - use extern in header files when declaring global variables for compatible gcc10 build
  - Add doc sub package(Weisson)


author: Marek Kasik <mkasik@redhat.com> 0.0.3-2
changelog:
  - Add handling of file:/ protocol
  - Change order of checked policies so the PolicyKit asks only for
    "printer-enable" policy when enabling/disabling a printer
  - Change order of checked policies so the PolicyKit asks only for
    "printer-set-default" policy when setting default printer


author: Marek Kasik <mkasik@redhat.com> 0.0.3-4
changelog:
  - Add ability to reconnect to CUPS server after its reload
    (caused by cupsAdminSetServerSettings() or cupsPutFile())


author: Marek Kasik <mkasik@redhat.com> - 0.0.3-6
changelog:
  - Replace job-cancel, job-restart and job-set-hold-until with job-edit
  - Replace job-cancel-another-owner, job-restart-another-owner
    and job-set-hold-until-another-owner with job-not-owned-edit
  - Add cph_cups_job_get_status() function + some minor changes


author: Marek Kasik <mkasik@redhat.com> - 0.0.4-8
changelog:
  - Fix adding of printers without specification of device-uri.
  - Patch by Tim Waugh.
  - Resolves: #526442


author: Marek Kasik <mkasik@redhat.com> - 0.0.4-10
changelog:
  - Fix adding of printers without specification of ppd-name.
  - Patch by Tim Waugh.
  - Resolves: #545452


author: Marek Kasik <mkasik@redhat.com> - 0.0.4-12
changelog:
  - Avoid timeout on job-related methods for invalid jobs
  - Make sure to return an error via dbus in case of failure
  - Remove a small leak
  - Resolves: #548790


author: Marek Kasik <mkasik@redhat.com> - 0.1.3-2
changelog:
  - Make ppd-name parameter optional
  - Readd patch for allowing authentication for any and inactive users
  - Readd patch for check of result of polkit authorization check
  - Resolves: #724959


author: Marek Kasik <mkasik@redhat.com> - 0.2.5-1
changelog:
  - Update to 0.2.5
  - Change URL of cups-pk-helper project
  - Use tarballs with configure
  - Fix changelog's dates


author: Tim Powers <timp@redhat.com>
changelog:
  - changelog started
  - general cleanups, changed prefix to /usr, added manpage to files section
  - including in Powertools


author: Tim Powers <timp@redhat.com>
changelog:
  - update to 7.4.1 to fix bug #20337, problems with curl -c
  - not using patch anymore, it's included in the new source. Keeping
    for reference


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - include curl-config in curl-devel
  - update to 7.8 to fix memory leak and strlcat() symbol pollution from libcurl


author: Joe Orton <jorton@redhat.com> 7.9.8-2
changelog:
  - fix `curl-config --libs` output for libdir!=/usr/lib
  - remove docs/LIBCURL from docs list; remove unpackaged libcurl.la
  - libtoolize and reconf


author: Adrian Havill <havill@redhat.com> 7.10.6-7
changelog:
  - aclocal before libtoolize
  - move OpenLDAP license so it's present as a doc file, present in
    both the source and binary as per conditions


author: Adrian Havill <havill@redhat.com> 7.12.1-1
changelog:
  - upgrade to 7.12.1
  - enable GSSAPI auth (#129353)
  - enable I18N domain names (#134595)
  - workaround for broken ProFTPD SSL auth (#134133). Thanks to
    Aleksandar Milivojevic


author: Adrian Havill <havill@redhat.com> 7.12.3-1
changelog:
  - Upgrade to 7.12.3, which uses poll() for FDSETSIZE limit (#134794)
  - require libidn-devel for devel subpkg (#141341)
  - remove proftpd kludge; included upstream


author: Joe Orton <jorton@redhat.com> 7.12.3-3
changelog:
  - don't pass /usr to --with-libidn to remove "-L/usr/lib" from
    'curl-config --libs' output on x86_64.


author: Ivana Varekova <varekova@redhat.com> - 7.15.1-2
changelog:
  - fix multilib problem - #181290 - 
    curl-devel.i386 not installable together with curl-devel.x86-64


author: Jindrich Novy <jnovy@redhat.com> - 7.16.0-2
changelog:
  - fix BuildRoot
  - add Requires: pkgconfig for curl-devel
  - move LDFLAGS and LIBS to Libs.private in libcurl.pc.in (#213278)


author: Jindrich Novy <jnovy@redhat.com> 7.16.2-4
changelog:
  - another series of review fixes (#225671),
    thanks to Paul Howarth
  - check version of ldap library automatically
  - don't use %makeinstall and preserve timestamps
  - drop useless patches


author: Jindrich Novy <jnovy@redhat.com> 7.16.3-1
changelog:
  - update to 7.16.3
  - drop .print patch, applied upstream
  - next series of merge review fixes by Paul Howarth
  - remove aclocal stuff, no more needed
  - simplify makefile arguments
  - don't reference standard library paths in libcurl.pc
  - include docs/CONTRIBUTE


author: Jindrich Novy <jnovy@redhat.com> 7.16.4-5
changelog:
  - add support for the NSS PKCS#11 pem reader so the command-line is the
    same for both OpenSSL and NSS by Rob Crittenden (rcritten@redhat.com)
  - switch to NSS again


author: Jindrich Novy <jnovy@redhat.com> 7.17.1-1
changelog:
  - update to curl 7.17.1
  - include patch to enable SSL usage in NSS when a socket is opened
    nonblocking, thanks to Rob Crittenden (rcritten@redhat.com)


author: Jindrich Novy <jnovy@redhat.com> 7.17.1-3
changelog:
  - drop useless ldap library detection since curl doesn't
    dlopen()s it but links to it -> BR: openldap-devel
  - enable LDAPS support (#225671), thanks to Paul Howarth
  - BR: krb5-devel to reenable GSSAPI support
  - simplify build process
  - update description


author: Jindrich Novy <jnovy@redhat.com> 7.18.1-1
changelog:
  - update to curl 7.18.1 (fixes #397911)
  - add ABI docs for libcurl
  - remove --static-libs from curl-config
  - drop curl-config patch, obsoleted by @SSL_ENABLED@ autoconf
    substitution (#432667)


author: Jindrich Novy <jnovy@redhat.com> 7.18.1-2
changelog:
  - spec cleanup, thanks to Paul Howarth (#225671)
    - drop BR: libtool
    - convert CHANGES and README to UTF-8
    - _GNU_SOURCE in CFLAGS is no more needed
    - remove bogus rpath


author: Jindrich Novy <jnovy@redhat.com> 7.19.4-1
changelog:
  - update to 7.19.4 (fixes CVE-2009-0037)
  - fix leak in curl_easy* functions, thanks to Kamil Dudka
  - drop nss-fix patch, applied upstream


author: Jindrich Novy <jnovy@redhat.com> 7.19.4-2
changelog:
  - drop .easy-leak patch, causes problems in pycurl (#488791)
  - fix libcurl-devel dependencies (#488895)


author: Kamil Dudka <kdudka@redhat.com> 7.19.4-6
changelog:
  - upstream patch fixing memory leak in lib/nss.c (#453612)
  - remove redundant dependency of libcurl-devel on libssh2-devel


author: Kamil Dudka <kdudka@redhat.com> 7.19.5-8
changelog:
  - do not pre-login to all PKCS11 slots, it causes problems with HW tokens
  - try to select client certificate automatically when not specified, thanks
    to Claes Jakobsson


author: Kamil Dudka <kdudka@redhat.com> 7.19.6-1
changelog:
  - new upstream release, dropped applied patches
  - changed NSS code to not ignore the value of ssl.verifyhost and produce more
    verbose error messages (#516056)


author: Kamil Dudka <kdudka@redhat.com> 7.19.6-3
changelog:
  - avoid tight loop during a sftp upload
  - http://permalink.gmane.org/gmane.comp.web.curl.library/24744


author: Kamil Dudka <kdudka@redhat.com> 7.19.6-4
changelog:
  - use pkg-config to find nss and libssh2 if possible
  - better patch (not only) for SCP/SFTP polling
  - improve error message for not matching common name (#516056)


author: Kamil Dudka <kdudka@redhat.com> 7.19.7-1
changelog:
  - new upstream release, dropped applied patches
  - workaround for broken TLS servers (#525496, #527771)


author: Kamil Dudka <kdudka@redhat.com> 7.19.7-3
changelog:
  - fix crash on doubly closed NSPR descriptor, patch contributed
    by Kevin Baughman (#534176)
  - new version of patch for broken TLS servers (#525496, #527771)


author: Kamil Dudka <kdudka@redhat.com> 7.19.7-11
changelog:
  - upstream patch adding a new option -J/--remote-header-name
  - dropped temporary workaround for #545779


author: Kamil Dudka <kdudka@redhat.com> 7.20.0-1
changelog:
  - new upstream release - added support for IMAP(S), POP3(S), SMTP(S) and RTSP
  - dropped patches applied upstream
  - dropped curl-7.16.0-privlibs.patch no longer useful
  - a new patch forcing -lrt when linking the curl tool and test-cases


author: Kamil Dudka <kdudka@redhat.com> 7.20.0-3
changelog:
  - throw CURLE_SSL_CERTPROBLEM in case peer rejects a certificate (#565972)
  - valgrind temporarily disabled (#574889)
  - kerberos installation prefix has been changed


author: Paul Howarth <paul@city-fan.org> 7.20.1-3
changelog:
  - replace Rawhide s390-sleep patch with a more targeted patch adding a
    delay after tests 513 and 514 rather than after all tests


author: Kamil Dudka <kdudka@redhat.com> 7.20.1-4
changelog:
  - upstream patch preventing failure of test536 with threaded DNS resolver
  - upstream patch preventing SSL handshake timeout underflow


author: Kamil Dudka <kdudka@redhat.com> 7.20.1-5
changelog:
  - CRL support now works again (#581926)
  - make it possible to start a testing OpenSSH server when building with SELinux
    in the enforcing mode (#521087)


author: Kamil Dudka <kdudka@redhat.com> 7.21.0-1
changelog:
  - new upstream release, drop applied patches
  - update of %description
  - disable valgrind for certain test-cases (libssh2 problem)


author: Kamil Dudka <kdudka@redhat.com> 7.21.1-2
changelog:
  - re-enable test575 on s390(x), already fixed (upstream commit d63bdba)
  - modify system headers to work around gcc bug (#617757)
  - curl -T now ignores file size of special files (#622520)
  - fix kerberos proxy authentication for https (#625676)
  - work around glibc/valgrind problem on x86_64 (#626470)


author: Paul Howarth <paul@city-fan.org> 7.21.1-3
changelog:
  - fix up patches so there's no need to run autotools in the rpm build
  - drop buildreq automake
  - drop dependency on automake for devel package from F-14, where
    %{_datadir}/aclocal is included in the filesystem package
  - drop dependency on pkgconfig for devel package from F-11, where
    pkgconfig dependencies are auto-generated


author: Kamil Dudka <kdudka@redhat.com> 7.21.2-4
changelog:
  - prevent FTP client from hanging on unrecognized ABOR response (#649347)
  - return more appropriate error code in case FTP server session idle
    timeout has exceeded (#650255)


author: Kamil Dudka <kdudka@redhat.com> 7.21.2-5
changelog:
  - do not send QUIT to a dead FTP control connection (#650255)
  - pull back glibc's implementation of str[n]casecmp(), #626470 appears fixed


author: Paul Howarth <paul@city-fan.org> 7.21.3-1
changelog:
  - update to 7.21.3:
    - added --noconfigure switch to testcurl.pl
    - added --xattr option
    - added CURLOPT_RESOLVE and --resolve
    - added CURLAUTH_ONLY
    - added version-check.pl to the examples dir
    - check for libcurl features for some command line options
    - Curl_setopt: disallow CURLOPT_USE_SSL without SSL support
    - http_chunks: remove debug output
    - URL-parsing: consider ? a divider
    - SSH: avoid using the libssh2_ prefix
    - SSH: use libssh2_session_handshake() to work on win64
    - ftp: prevent server from hanging on closed data connection when stopping
      a transfer before the end of the full transfer (ranges)
    - LDAP: detect non-binary attributes properly
    - ftp: treat server's response 421 as CURLE_OPERATION_TIMEDOUT
    - gnutls->handshake: improved timeout handling
    - security: pass the right parameter to init
    - krb5: use GSS_ERROR to check for error
    - TFTP: resend the correct data
    - configure: fix autoconf 2.68 warning: no AC_LANG_SOURCE call detected
    - GnuTLS: now detects socket errors on Windows
    - symbols-in-versions: updated en masse
    - added a couple of examples that were missing from the tarball
    - Curl_send/recv_plain: return errno on failure
    - Curl_wait_for_resolv (for c-ares): correct timeout
    - ossl_connect_common: detect connection re-use
    - configure: prevent link errors with --librtmp
    - openldap: use remote port in URL passed to ldap_init_fd()
    - url: provide dead_connection flag in Curl_handler::disconnect
    - lots of compiler warning fixes
    - ssh: fix a download resume point calculation
    - fix getinfo CURLINFO_LOCAL* for reused connections
    - multi: the returned running handles counter could turn negative
    - multi: only ever consider pipelining for connections doing HTTP(S)
  - drop upstream patches now in tarball
  - update bz650255 and disable-test1112 patches to apply against new codebase
  - add workaround for false-positive glibc-detected buffer overflow in tftpd
    test server with FORTIFY_SOURCE (similar to #515361)


author: Kamil Dudka <kdudka@redhat.com> 7.21.4-1
changelog:
  - new upstream release
  - avoid memory leak on SSL connection failure (upstream commit a40f58d)
  - work around valgrind bug (#678518)


author: Kamil Dudka <kdudka@redhat.com> 7.21.7-3
changelog:
  - fix SIGSEGV of curl -O -J given more than one URL (#723075)
  - introduce the --delegation option of curl (#730444)
  - initialize NSS with no database if the selected database is broken (#728562)


author: Paul Howarth <paul@city-fan.org> 7.25.0-1
changelog:
  - new upstream release (#806264)
  - fix character encoding of docs with a patch rather than just iconv
  - update debug and multilib patches
  - don't use macros for commands
  - reduce size of %prep output for readability


author: Kamil Dudka <kdudka@redhat.com> 7.25.0-2
changelog:
  - use NSS_InitContext() to initialize NSS if available (#738456)
  - provide human-readable names for NSS errors (upstream commit a60edcc6)


author: Kamil Dudka <kdudka@redhat.com> 7.27.0-3
changelog:
  - use the upstream facility to disable problematic tests
  - do not crash if MD5 fingerprint is not provided by libssh2


author: Kamil Dudka <kdudka@redhat.com> 7.28.1-2
changelog:
  - prevent NSS from crashing on client auth hook failure
  - clear session cache if a client cert from file is used
  - fix error messages for CURLE_SSL_{CACERT,CRL}_BADFILE


author: Kamil Dudka <kdudka@redhat.com> 7.29.0-3
changelog:
  - switch SSL socket into non-blocking mode after handshake
  - drop the hide_selinux.c hack no longer needed in %check


author: Kamil Dudka <kdudka@redhat.com> 7.29.0-4
changelog:
  - do not ignore poll() failures other than EINTR (#919127)
  - curl_global_init() now accepts the CURL_GLOBAL_ACK_EINTR flag (#919127)


author: Kamil Dudka <kdudka@redhat.com> 7.30.0-1
changelog:
  - new upstream release (fixes CVE-2013-1944)
  - prevent test-suite failure due to using non-default port ranges in tests


author: Kamil Dudka <kdudka@redhat.com> 7.33.0-1
changelog:
  - new upstream release
  - fix missing initialization in NTLM code causing test 906 to fail
  - fix missing initialization in SSH code causing test 619 to fail


author: Kamil Dudka <kdudka@redhat.com> 7.37.1-1
changelog:
  - new upstream release
  - fix endless loop with GSSAPI proxy auth (patches by David Woodhouse, #1118751)


author: Kamil Dudka <kdudka@redhat.com> 7.42.0-1
changelog:
  - new upstream release (fixes CVE-2015-3143, CVE-2015-3144, CVE-2015-3145,
    and CVE-2015-3148)
  - implement public key pinning for NSS backend (#1195771)
  - do not run flaky test-cases in %check


author: Kamil Dudka <kdudka@redhat.com> 7.46.0-1
changelog:
  - disable silent builds (suggested by Paul Howarth)
  - use default port numbers when running the upstream test-suite
  - install zsh completion script
  - new upstream release


author: Kamil Dudka <kdudka@redhat.com> 7.50.0-1
changelog:
  - run HTTP/2 tests only on Intel for now to work around #1358845
  - require nss-pem because it is no longer included in the nss package (#1347336)
  - fix HTTPS and FTPS tests (work around stunnel bug #1358810)
  - new upstream release


author: Kamil Dudka <kdudka@redhat.com> 7.50.1-2
changelog:
  - work around race condition in PK11_FindSlotByName()
  - fix incorrect use of a previously loaded certificate from file
    (related to CVE-2016-5420)


author: Kamil Dudka <kdudka@redhat.com> 7.51.0-1
changelog:
  - temporarily disable failing libidn2 test-cases
  - new upstream release, which fixes the following vulnerabilities
      CVE-2016-8615 - Cookie injection for other servers
      CVE-2016-8616 - Case insensitive password comparison
      CVE-2016-8617 - Out-of-bounds write via unchecked multiplication
      CVE-2016-8618 - Double-free in curl_maprintf
      CVE-2016-8619 - Double-free in krb5 code
      CVE-2016-8620 - Glob parser write/read out of bounds
      CVE-2016-8621 - curl_getdate out-of-bounds read
      CVE-2016-8622 - URL unescape heap overflow via integer truncation
      CVE-2016-8623 - Use-after-free via shared cookies
      CVE-2016-8624 - Invalid URL parsing with '#'
      CVE-2016-8625 - IDNA 2003 makes curl use wrong host


author: Kamil Dudka <kdudka@redhat.com> 7.53.0-1
changelog:
  - do not use valgrind on ix86 until sqlite is rebuilt by patched GCC (#1423434)
  - new upstream release (fixes CVE-2017-2629)


author: Paul Howarth <paul@city-fan.org> 7.53.1-7
changelog:
  - add %post and %postun scriptlets for libcurl-minimal
  - libcurl-minimal provides both libcurl and libcurl%{?_isa}
  - remove some legacy spec file cruft


author: Kamil Dudka <kdudka@redhat.com> 7.54.0-2
changelog:
  - nss: use libnssckbi.so as the default source of trust
  - nss: do not leak PKCS #11 slot while loading a key (#1444860)


author: Kamil Dudka <kdudka@redhat.com> 7.55.0-1
changelog:
  - drop multilib fix for libcurl header files no longer needed
  - new upstream release, which fixes the following vulnerabilities
      CVE-2017-1000099 - FILE buffer read out of bounds
      CVE-2017-1000100 - TFTP sends more than buffer size
      CVE-2017-1000101 - URL globbing out of bounds read


author: Kamil Dudka <kdudka@redhat.com> - 7.57.0-1
changelog:
  - new upstream release, which fixes the following vulnerabilities
      CVE-2017-8816 - curl: NTLM buffer overflow via integer overflow
      CVE-2017-8817 - curl: FTP wildcard out of bounds read
      CVE-2017-8818 - curl: SSL out of buffer access


author: Kamil Dudka <kdudka@redhat.com> - 7.58.0-1
changelog:
  - new upstream release, which fixes the following vulnerabilities
      CVE-2018-1000005 - curl: HTTP/2 trailer out-of-bounds read
      CVE-2018-1000007 - curl: HTTP authentication leak in redirects


author: Kamil Dudka <kdudka@redhat.com> - 7.58.0-3
changelog:
  - temporarily work around internal compiler error on x86_64 (#1540549)
  - disable brp-ldconfig to make RemovePathPostfixes work with shared libs again


author: Paul Howarth <paul@city-fan.org> - 7.58.0-6
changelog:
  - switch to %ldconfig_scriptlets
  - drop legacy BuildRoot: and Group: tags
  - enforce versioned libssh dependency for libcurl


author: Paul Howarth <paul@city-fan.org> - 7.58.0-7
changelog:
  - Add explicity-used build requirements
  - Fix libcurl soname version number in %files list to avoid accidental soname
    bumps


author: Kamil Dudka <kdudka@redhat.com> - 7.59.0-1
changelog:
  - new upstream release, which fixes the following vulnerabilities
      CVE-2018-1000120 - FTP path trickery leads to NIL byte out of bounds write
      CVE-2018-1000121 - LDAP NULL pointer dereference
      CVE-2018-1000122 - RTSP RTP buffer over-read


author: Kamil Dudka <kdudka@redhat.com> - 7.60.0-1
changelog:
  - new upstream release, which fixes the following vulnerabilities
      CVE-2018-1000300 - FTP shutdown response buffer overflow
      CVE-2018-1000301 - RTSP bad headers buffer over-read


author: Kamil Dudka <kdudka@redhat.com> - 7.61.0-1
changelog:
  - new upstream release, which fixes the following vulnerability
      CVE-2018-0500 - SMTP send heap buffer overflow


author: Kamil Dudka <kdudka@redhat.com> - 7.61.0-3
changelog:
  - disable flaky test 1900, which covers deprecated HTTP pipelining
  - adapt test 323 for updated OpenSSL


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-6
changelog:
  - SASL password overflow via integer overflow (CVE-2018-16839)
  - fix use-after-free in handle close (CVE-2018-16840)
  - fix bad arethmetic when outputting warnings to stderr (CVE-2018-16842)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-10
changelog:
  - fix SMTP end-of-response out-of-bounds read (CVE-2019-3823)
  - fix NTLMv2 type-3 header stack buffer overflow (CVE-2019-3822)
  - fix NTLM type-2 out-of-bounds buffer read (CVE-2018-16890)
  - xattr: strip credentials from any URL that is stored (CVE-2018-20483)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-12
changelog:
  - double free due to subsequent call of realloc() (CVE-2019-5481)
  - fix heap buffer overflow in function tftp_receive_packet() (CVE-2019-5482)
  - fix TFTP receive buffer overflow (CVE-2019-5436)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-15
changelog:
  - do not crash when HTTPS_PROXY and NO_PROXY are used together (#1873327)
  - libcurl: wrong connect-only connection (CVE-2020-8231)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-18
changelog:
  - http: send payload when (proxy) authentication is done (#1918692)
  - curl: Inferior OCSP verification (CVE-2020-8286)
  - libcurl: FTP wildcard stack overflow (CVE-2020-8285)
  - curl: trusting FTP PASV responses (CVE-2020-8284)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-19
changelog:
  - make `curl --head file://` work as expected (#1947493)
  - prevent automatic referer from leaking credentials (CVE-2021-22876)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-21
changelog:
  - fix TELNET stack contents disclosure again (CVE-2021-22925)
  - fix TELNET stack contents disclosure (CVE-2021-22898)
  - fix bad connection reuse due to flawed path name checks (CVE-2021-22924)
  - disable metalink support to fix the following vulnerabilities
      CVE-2021-22923 - metalink download sends credentials
      CVE-2021-22922 - wrong content via metalink not discarded


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-22
changelog:
  - fix STARTTLS protocol injection via MITM (CVE-2021-22947)
  - fix protocol downgrade required TLS bypass (CVE-2021-22946)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-23
changelog:
  - fix credential leak on redirect (CVE-2022-27774)
  - fix auth/cookie leak on redirect (CVE-2022-27776)
  - fix OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-24
changelog:
  - fix too eager reuse of TLS and SSH connections (CVE-2022-27782)
  - fix invalid type in printf() argument detected by Coverity


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-25
changelog:
  - setopt: enable CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION (#2063703)
  - fix HTTP compression denial of service (CVE-2022-32206)
  - fix FTP-KRB bad message verification (CVE-2022-32208)


author: Bo Liu <liub03@inspur.com> - 7.61.1-31.0.3.2
changelog:
  - url: only reuse connections with same GSS delegation (CVE-2023-27536)
  - fix host name wildcard checking (CVE-2023-28321)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-31
changelog:
  - fix GSS delegation too eager connection re-use (CVE-2023-27536)
  - fix FTP too eager connection reuse (CVE-2023-27535)


author: Weisson <wenshu.hx@alibaba-inc.com> - 7.61.1-33.0.1
changelog:
  - Add doc sub package
  - Generate pubkey pinned certs (Liwei Ge)
  - url: only reuse connections with same GSS delegation (CVE-2023-27536)(Bo Liu)
  - fix host name wildcard checking (CVE-2023-28321)(Bo Liu)


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 2.5.10-1
changelog:
  - Initial update to the 2.5 series.
  - Significant spec cleanups.
  - Add sscg dep and follow
    https://fedoraproject.org/wiki/Packaging:Initial_Service_Setup for initial
    cert generation.
  - Change default conf to use the system crypto policy.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.1-1
changelog:
  - Initial attempt at importing 3.0.  Many new dependencies.
  - Use a stock sample imapd.conf file instead of a Fedora-provided one.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.1-2
changelog:
  - Add patch to fix up some endianness issues.
  - Enable both test suites on all architectures.
  - Add arch-specific excludes for a few Cassandane tests.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.1-3
changelog:
  - Remove clamav from build requirements.
  - Add --cleanup to Cassandane call to hopefully reduce build disk usage.
  - Disable maxforkrate test on s390x; our builders are too slow to run it.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.1-5
changelog:
  - Use proper path to ctl_mboxlist in cron file.
  - Add patch to increase individual test timeout.  Sometimes armv7hl can't
    complete a single test in 20 seconds.
  - Disable the Metronome tests; upstream says that they just won't reliably on
    shared hardware.
  - Don't bother running Cassandane on s390x for now.  The machines are simply
    too slow.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.1-6
changelog:
  - Rename two commands: quota -> cyr_quota, restore -> cyr_restore.
  - Fix Cassandane to handle those renames.
  - Fix location of cyr_fetchnews.
  - Fix Perl 5.26-related module linking issue which caused a test failure.
    Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1461669


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.1-7
changelog:
  - Add old /usr/lib/cyrus-imapd directory to the utils package and add a symlink
    there to the deliver binary.  This should help a bit with migrations.
  - Add upstream patch to fix reconstruct failures on 32-bit architectures.
    Re-enable those five Cassandane tests.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.2-2
changelog:
  - Exclude one more test from 32-bit arches.  Looks like this failure crept in
    with the Cassandane update.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.2-3
changelog:
  - Patch the provided imapd.conf and cyrus.conf to more closely match previous
    Fedora defaults and directories included in this package and to enable
    features which are supported by the Fedora build.
  - Add tmpfiles.d configuration file for directories in /run.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.2-5
changelog:
  - Add two patches from upstream which fix JMAPCalendars issues on 32-bit and
    big-endian architectures.
  - Clean up test invocation and exclusion list.  More tests pass now.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.3-1
changelog:
  - Update to 3.0.3, which contains an important security fix.  The fix is not
    embargoed but no CVE has been assigned yet.
  - Drop patches merged upstream.
  - An update of imaptest has resulted in three additional cassandane failures,
    reported upstream as https://github.com/cyrusimap/cyrus-imapd/issues/2087.
    In order to get the security fix out without delay, those three tests have been
    disabled.


author: Pavel Zhukov <landgraf@fedoraproject.org> - 3.0.4-1
changelog:
  - Update to 3.0.4
  - Patched cassandane for new behaviour. It should be updated idealy.
  - Disable ImapTest.urlauth2 test; it seems to fail randomly regardless of
    architecture.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.4-3
changelog:
  - Rebuild for new libical.
  - Add patch to fix compilation error with new libical.
  - Disable two tests which fail due to the new libical.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.5-3
changelog:
  - Re-enable clamav and mariadb support as those are now built with openssl 1.1.
  - But no clamav on ppc64 because of
    https://bugzilla.redhat.com/show_bug.cgi?id=1534071


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.5-5
changelog:
  - Add patch to fix segfaults in squatter.
  - Exclude one test on all releases instead of just F28+.
  - Remove --cleanup from cassandane invocation.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.5-6
changelog:
  - Update cassandane checkout.
  - Add two new build dependencies.
  - Remove all JMAP-related tests from the exclusion lists, since cassandane no
    longer runs any JMAP tests on cyrus 3.0.
  - Collapse unused test skip lists.
  - Add ten additional skipped tests, after consultation with upstream.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.5-10
changelog:
  - Update cassandane checkout to fix a test that was broken by DST.
  - Add patch to fix sieve scripts for usernames containing a dot.
  - Disable imaptest in cassandane until
    https://bugzilla.redhat.com/show_bug.cgi?id=1562970 is fixed.
  - Re-enable tests on s390; it seems to be better now.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.5-11
changelog:
  - Re-enable imaptest on >= F29.
  - F29's imaptest fixes several bugs, allowing all tests to be run there.
  - Relocate cassandane base port to hopefully work better in koji.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.5-12
changelog:
  - Update list of excluded tests.
  - Update Cassandane snapshot; use new base_port config setting.  No need to
    patch that in now.
  - Add four new expected-to-fail tests from new Cassandane snapshot.
  - Add patch to collect extra Cassandane logging in case we hit some of those
    sporadic failures again.


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 3.0.6-1
changelog:
  - Update to 3.0.6.
  - Remove upstreamed patches and renumber the rest.
  - Disable one new failing test:
    https://github.com/cyrusimap/cyrus-imapd/issues/2332


author: Martin Osvald <mosvald@redhat.com> - 3.0.7-24
changelog:
  - Resolves: #1911689 - Fatal error when running "squatter -r user"
  - Resolves: #1941255 - Wait for network-online target
  - Resolves: #1918780 - "(null)" partitions in ctl_mboxlist


author: Krzysztof Czurylo <krzysztof.czurylo@intel.com> - 1.1-1
changelog:
  - NVML 1.1 release
  - Update link to source tarball
  - Add libpmempool subpackage
  - Remove obsolete patches


author: Krzysztof Czurylo <krzysztof.czurylo@intel.com> - 1.3-1
changelog:
  - Update to NVML version 1.3 (RHBZ #1451741, RHBZ #1455216)
  - Add librpmem and rpmemd sub-packages
  - Force file system to appear as PMEM for make check


author: Jeff Moyer <jmoyer@redhat.com> - 1.4-4
changelog:
  - Get rid of SuSe conditionals (Jeff Moyer)
  - Remove the %check section. (Jeff Moyer)
  - Resolves: rhbz#1580829


author: Jeff Moyer <jmoyer@redhat.com> - 1.4-5.el8
changelog:
  - use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    FCFLAGS="${FCFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FCFLAGS ; 
    LDFLAGS="${LDFLAGS:--Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld}" ; export LDFLAGS instead of -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection
  - Resolves: rhbz#1630611


author: Jeff Moyer <jmoyer@redhat.com> - 1.5-1.el8
changelog:
  - rebase to pmdk-1.5, and rename to nvml (Jeff Moyer)
  - broken libpmemcto was removed
  - c++ bindings were moved to a separate project/package
  - Fix library requires to be =n-v-r instead of >= (Jeff Moyer)
  - resolves: rhbz#1488828


author: Jeff Moyer <jmoyer@redhat.com> - 1.6-2.el8
changelog:
  - Add explicit version dependencies
  - Fix up broken link line in build system
  - Related: rhbz#1598527


author: Jeff Moyer <jmoyer@redhat.com> - 1.9.2-1.el8
changelog:
  - Package pmdk version 1.9.2 for stream 1-fileformat-v6-rhel-8.3.1
  - libvmem is no longer packaged as part of pmdk.
  - ppc64le packages are now built
  - Related: rhbz#1524652, rhbz#1780388, rhbz#1854812, rhbz#1860860


author: Jeff Moyer <jmoyer@redhat.com> - 1.4-5.el8
changelog:
  - use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    FCFLAGS="${FCFLAGS:--O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules}" ; export FCFLAGS ; 
    LDFLAGS="${LDFLAGS:--Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld}" ; export LDFLAGS instead of -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection
  - Resolves: rhbz#1630611


author: Havoc Pennington <hp@redhat.com> 0.6.91-1
changelog:
  - disable qt for now because beehive hates me
  - pull a slightly newer cvs snap that creates socket directory
  - cat the make check log after make check fails


author: Havoc Pennington <hp@redhat.com> 0.6.93-1
changelog:
  - new cvs snap that actually forks to background and changes
    user it's running as and so forth
  - create our system user in pre


author: Havoc Pennington <hp@redhat.com> 0.11.91-3
changelog:
  - break the tiny dbus-launch that depends on X into separate package
    so a CUPS server doesn't need X installed


author: Havoc Pennington <hp@redhat.com> 0.13-2
changelog:
  - see if removing qt subpackage for now will get us through the build system,
    qt bindings not useful yet anyway


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Conflict with cups prior to configuration file change, so that the
    %postun service condrestart works.


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Moved dbus-viewer, dbus-monitor and dbus-glib-tool
    into the dbus-glib package so that the main dbus
    package does not depend on glib (Bug #125285)


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Added lib64 workaround for python bindings installing to
    the wrong lib directory on 64 bit archs


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Moved dbus-viewer to new dbus-gtk package so that dbus-glib
    no longer requires X or GTK libraries. (RH Bug #130029)


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - reverting BuildRequires: redhat-release because of issues with build system
  - added precompiled version of the messagebus init script


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Fixed patch to use dbus-1 instead of dbus-1.0
  - (configure.in): Exported just the datadir instead of
    the full path to the dbus datadir for consistency


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Add a requires for glib2-devel in the devel package
  - Add SE-Linux backport from Colin Walters that fixes
    messages getting lost in SE-Linux contexts


author: John (J5) Palmieri <johnp@redhat.com> - 0.23-1
changelog:
  - Update to upstream version 0.23
  - Drop all patches except for the UDI patch as they have been
    integrated upstream
  - List of API changes:
        * add setgroups() to drop supplementary groups
        * removed dbus_bug_get_with_g_main since it's been replaced by dbus_g_bus_get
        * added support for int64 and uint64 to the python bindings
        * use SerivceOwnerChanges signal instead of ServiceCreated and ServiceDeleted


author: John (J5) Palmieri <johnp@redhat.com> - 0.23-4
changelog:
  - Explicitly pass in the pid file location to ./configure instead of
    letting it guess based on the build enviornment


author: John (J5) Palmieri <johnp@redhat.com> - 0.31-1
changelog:
  - update to upstream version 0.31
  - take out user has same id patch (merged upstream)
  - udi patch updated
  - dbus-daemon-1 renamed to dbus-daemon
  - dbus-glib-tool renamed to dbus-binding-tool
  - force gcc33 because pyrex generate improper lvalue code
  - disable audit patch for now


author: John (J5) Palmieri <johnp@redhat.com> - 0.32-2
changelog:
  - add selinux-init patch to fix dbus from segfaulting when
    building on machines that don't have selinux enabled


author: John (J5) Palmieri <johnp@redhat.com> - 0.32-5
changelog:
  - replace selinux_init patch with selinux_chroot_workaround patch
    to work around bad selinux interactions when using chroots
    on the beehive build machines


author: John (J5) Palmieri <johnp@redhat.com> - 0.34-1
changelog:
  - Upgrade to dbus-0.34
  - added dbus-0.34-kill-babysitter.patch
  - added dbus-0.34-python-threadsync.patch
  - remove dbus-0.32-print_child_pid.patch
  - remove dbus-0.32-deadlock-fix.patch
  - remove dbus-0.33-types.patch


author: John (J5) Palmieri <johnp@redhat.com> - 0.35.2-1
changelog:
  - Upgrade to dbus-0.35.2
  - removed dbus-0.34-kill-babysitter.patch
  - removed dbus-0.34-python-threadsync.patch
  - removed dbus-0.23-selinux-avc-audit.patch
  - added dbus-0.35.2-selinux-avc-audit.patch
  - take out restarts on upgrade


author: John (J5) Palmieri <johnp@redhat.com> - 0.36-1
changelog:
  - Upgrade to dbus-0.36
  - Split modules that go into %{_lib}/python2.4/site-packages/dbus
  and those that go into %{python_sitelib}/dbus (they differ on 64bit)
  - Renable Qt bindings since packages in core can use them


author: John (J5) Palmieri <johnp@redhat.com> - 0.36.2-1
changelog:
  - upgrade to 0.36.2 which fixes an exploit where
    users can attach to another user's session bus (CAN-2005-0201)


author: John (J5) Palmieri <johnp@redhat.com> 0.60-5
changelog:
  - move base libraries and binaries to /bin and /lib so they can be started
    before /usr is mounted on network mounted /usr systems
  - have D-Bus start early


author: John (J5) Palmieri <johnp@redhat.com> 0.60-7
changelog:
  - Add patch to fix the python callchain
  - Symlink dbus-send to /usr/bin because some applications
    look for it there


author: John (J5) Palmieri <johnp@redhat.com> 0.61-3
changelog:
  - ABI hasn't changed so add patch that makes dbus-sharp think
    it is still 0.60 (mono uses hard version names so any change
    means apps need to recompile)


author: John (J5) Palmieri <johnp@redhat.com> - 0.61-5
changelog:
  - Backport patch from dbus-connection.c
    - Allows interfaces to be NULL in the message header as per the spec
    - Fixes a problem with pendings calls blocking on a data starved socket


author: Karsten Hopp <karsten@redhat.de> 0.61-5.2
changelog:
  - add buildrequires libICE-devel, libSM-devel, libcap-devel
  - change buildrequires form libX11 to libX11-devel


author: John (J5) Palmieri <johnp@redhat.com> - 0.90-4
changelog:
  - add patch that pregenerates the xml introspect file so d-bus doesn't
    have to be running suring the build.


author: John (J5) Palmieri <johnp@redhat.com> - 0.90-6
changelog:
  - change the arch-deps.h include directory to /usr/lib[64] instead of /lib[64]
    in the dbus-1.pc file after compile


author: Ray Strode <rstrode@redhat.com> - 1.0.1-1
changelog:
  - Update to 1.0.1
  - Apply patch from Thiago Macieira <thiago@kde.org> to
    fix failed assertion in threading implementation
  - Drop some crazy looking build time speed optimization


author: David Zeuthen <davidz@redhat.com> - 1.1.2-2.an8
changelog:
  - Move system bus activation helper to /{lib,lib64}/dbus-1. Also set
    the correct mode and permissions.
  - Own the directory /usr/share/dbus-1/system-services
  - Delete the diretory /{lib,lib64}/dbus-1.0 as it's not used
  - Pass 'dbus' instead of 81 as --with-dbus-user; otherwise the setuid
    system bus activation helper fails


